Three-dimensional magnetization structures revealed with X-ray vector nanotomography.

In soft ferromagnetic materials, the smoothly varying magnetization leads to the formation of fundamental patterns such as domains, vortices and domain walls. These have been studied extensively in thin films of thicknesses up to around 200 nanometres, in which the magnetization is accessible with current transmission imaging methods that make use of electrons or soft X-rays. In thicker samples, however, in which the magnetization structure varies throughout the thickness and is intrinsically three dimensional, determining the complex magnetic structure directly still represents a challenge. We have developed hard-X-ray vector nanotomography with which to determine the three-dimensional magnetic configuration at the nanoscale within micrometre-sized samples. We imaged the structure of the magnetization within a soft magnetic pillar of diameter 5 micrometres with a spatial resolution of 100 nanometres and, within the bulk, observed a complex magnetic configuration that consists of vortices and antivortices that form cross-tie walls and vortex walls along intersecting planes. At the intersections of these structures, magnetic singularities-Bloch points-occur. These were predicted more than fifty years ago but have so far not been directly observed. Here we image the three-dimensional magnetic structure in the vicinity of the Bloch points, which until now has been accessible only through micromagnetic simulations, and identify two possible magnetization configurations: a circulating magnetization structure and a twisted state that appears to correspond to an 'anti-Bloch point'. Our imaging method enables the nanoscale study of topological magnetic structures in systems with sizes of the order of tens of micrometres. Knowledge of internal nanomagnetic textures is critical for understanding macroscopic magnetic properties and for designing bulk magnets for technological applications.

Three-Dimensional Vortex Gyration Dynamics Unraveled by Time-Resolved Soft X-ray Laminography with Freely Selectable Excitation Frequencies.

The imaging of magneto-dynamical processes has been, so far, mostly a two-dimensional business, also due to the constraints of the available experimental techniques. In this paper, building on the recent developments of soft X-ray magnetic laminography, we present an experimental setup where magneto-dynamical processes can be resolved in all three spatial dimensions and in time at arbitrary frequencies. We employ this setup to investigate two resonant dynamical modes of a CoFeB microstructure, namely, the fundamental vortex gyration mode and a magnetic field-induced domain wall excitation mode. For the former, we observe a large variation of the gyration dynamics across the thickness of the core, coexisting with a breathing mode of the vortex core. For the latter, we observe a uniform displacement of the domain walls across the thickness of the microstructure. The imaging of these two modes establishes the possibility to freely select the excitation frequency for soft X-ray time-resolved laminography, allowing for the investigation of resonant magneto-dynamical processes.

Layer-by-Layer Growth of Complex-Shaped Three-Dimensional Nanostructures with Focused Electron Beams.

The fabrication of three-dimensional (3D) nanostructures is of great interest to many areas of nanotechnology currently challenged by fundamental limitations of conventional lithography. One of the most promising direct-write methods for 3D nanofabrication is focused electron beam-induced deposition (FEBID), owing to its high spatial resolution and versatility. Here we extend FEBID to the growth of complex-shaped 3D nanostructures by combining the layer-by-layer approach of conventional macroscopic 3D printers and the proximity effect correction of electron beam lithography. This framework is based on the continuum FEBID model and is capable of adjusting for a wide range of effects present during deposition, including beam-induced heating, defocusing, and gas flux anisotropies. We demonstrate the capabilities of our platform by fabricating free-standing nanowires, surfaces with varying curvatures and topologies, and general 3D objects, directly from standard stereolithography (STL) files and using different precursors. Real 3D nanoprinting as demonstrated here opens up exciting avenues for the study and exploitation of 3D nanoscale phenomena.

From 2D STXM to 3D Imaging: Soft X-ray Laminography of Thin Specimens.

X-ray tomography has become an indispensable tool for studying complex 3D interior structures with high spatial resolution. Three-dimensional imaging using soft X-rays offers powerful contrast mechanisms but has seen limited success with tomography due to the restrictions imposed by the much lower energy of the probe beam. The generalized geometry of laminography, characterized by a tilted axis of rotation, provides nm-scale 3D resolution for the investigation of extended (mm range) but thin (µm to nm) samples that are well suited to soft X-ray studies. This work reports on the implementation of soft X-ray laminography (SoXL) at the scanning transmission X-ray spectromicroscope of the PolLux beamline at the Swiss Light Source, Paul Scherrer Institut, which enables 3D imaging of extended specimens from 270 to 1500 eV. Soft X-ray imaging provides contrast mechanisms for both chemical sensitivity to molecular bonds and oxidation states and magnetic dichroism due to the much stronger attenuation of X-rays in this energy range. The presented examples of applications range from functionalized nanomaterials to biological photonic crystals and sophisticated nanoscaled magnetic domain patterns, thus illustrating the wide fields of research that can benefit from SoXL.

Electroless Deposition of Ni-Fe Alloys on Scaffolds for 3D Nanomagnetism.

3D magnetic nanostructures are of great interest due to the possibility to design novel properties and the benefits for both technological applications such as high-density data storage, as well as more fundamental studies. One of the main challenges facing the realization of these three-dimensional systems is their fabrication, which includes the deposition of magnetic materials on 3D surfaces. In this work, the electroless deposition of Ni-Fe on a 3D-printed, non-conductive microstructure is presented. The deposited films exhibit low coercivity, with the saturation magnetization and composition corresponding to the archetypal soft magnetic material permalloy. For fundamental studies of 3D micromagnetism, this new development in fabrication offers the possibility to combine the flexibility of 3D nanofabrication techniques such as two-photon lithography for the fabrication of 3D scaffolds with a homogeneous soft ferromagnetic thin film, and thus represents an important step toward exploring the rich physics of complex 3D magnetic architectures with tailored properties and the development of advanced applications.

Emergent dynamic chirality in a thermally driven artificial spin ratchet.

Modern nanofabrication techniques have opened the possibility to create novel functional materials, whose properties transcend those of their constituent elements. In particular, tuning the magnetostatic interactions in geometrically frustrated arrangements of nanoelements called artificial spin ice can lead to specific collective behaviour, including emergent magnetic monopoles, charge screening and transport, as well as magnonic response. Here, we demonstrate a spin-ice-based active material in which energy is converted into unidirectional dynamics. Using X-ray photoemission electron microscopy we show that the collective rotation of the average magnetization proceeds in a unique sense during thermal relaxation. Our simulations demonstrate that this emergent chiral behaviour is driven by the topology of the magnetostatic field at the edges of the nanomagnet array, resulting in an asymmetric energy landscape. In addition, a bias field can be used to modify the sense of rotation of the average magnetization. This opens the possibility of implementing a magnetic Brownian ratchet, which may find applications in novel nanoscale devices, such as magnetic nanomotors, actuators, sensors or memory cells.

Element-specific X-ray phase tomography of 3D structures at the nanoscale.

Recent advances in fabrication techniques to create mesoscopic 3D structures have led to significant developments in a variety of fields including biology, photonics, and magnetism. Further progress in these areas benefits from their full quantitative and structural characterization. We present resonant ptychographic tomography, combining quantitative hard x-ray phase imaging and resonant elastic scattering to achieve ab initio element-specific 3D characterization of a cobalt-coated artificial buckyball polymer scaffold at the nanoscale. By performing ptychographic x-ray tomography at and far from the Co K edge, we are able to locate and quantify the Co layer in our sample to a 3D spatial resolution of 25 nm. With a quantitative determination of the electron density we can determine that the Co layer is oxidized, which is confirmed with microfluorescence experiments.

Coming back for more: factors linked to higher participation among Veterans with chronic pain in an innovative VA-YMCA wellness clinic.

In 2019, the Indianapolis VA developed a Wellness Clinic in partnership with the Young Men's Christian Associations (YMCA) to comprehensively address Veterans' chronic pain. Our specific aims were twofold: (1) to evaluate the implementation of the Veterans Health Indiana (VHI) Wellness Clinic on patient utilisation and (2) to evaluate patient functioning.We conducted a mixed-methods evaluation, which included the extraction of VA administrative data to identify a patient cohort; the conduct of chart review to extract clinic utilisation, clinical outcomes collected during pain-related healthcare services and comorbidities; and semistructured interviews with Veteran patients who used the VHI Wellness Clinic in different patterns to identify challenges and facilitators to clinic utilisation. We applied configurational analysis to a Veteran sample who had their first visit to the VHI Wellness Clinic in March/April 2019 to pinpoint difference-making factors linked to Veterans' successful participation.The cohort included 312 Veterans (83% male), mean age of 55.4 years. The configurational model included six factors: participation in physical therapy, pain psychology or pain education sessions (22%); presence of any 'no-shows' (57% had 0); history of depression (39%) and clinic referral source (51% self-referred from primary care). The model consisted of four different pathways to successful participation, explaining 60% of cases in the higher-participation group with 86% consistency. Patient outcomes after clinic utilisation demonstrated a significant reduction in self-reported pain and pain catastrophising across time. Moreover, patients reported distance to clinic as both a facilitator and challenge.This mixed-methods analysis identified specific biopsychosocial factors and clinical services directly linked to higher Veteran participation in a new VA-YMCA Wellness Clinic. The VHI Wellness Clinic embedded within a YMCA facility is a feasible and efficacious healthcare delivery model for primary care patients experiencing chronic pain. Additional marketing to clinical providers for referrals and to patients to extend its reach is needed.

Three-dimensional spin-wave dynamics, localization and interference in a synthetic antiferromagnet.

Spin waves are collective perturbations in the orientation of the magnetic moments in magnetically ordered materials. Their rich phenomenology is intrinsically three-dimensional; however, the three-dimensional imaging of spin waves has so far not been possible. Here, we image the three-dimensional dynamics of spin waves excited in a synthetic antiferromagnet, with nanoscale spatial resolution and sub-ns temporal resolution, using time-resolved magnetic laminography. In this way, we map the distribution of the spin-wave modes throughout the volume of the structure, revealing unexpected depth-dependent profiles originating from the interlayer dipolar interaction. We experimentally demonstrate the existence of complex three-dimensional interference patterns and analyze them via micromagnetic modelling. We find that these patterns are generated by the superposition of spin waves with non-uniform amplitude profiles, and that their features can be controlled by tuning the composition and structure of the magnetic system. Our results open unforeseen possibilities for the study and manipulation of complex spin-wave modes within nanostructures and magnonic devices.

Content Analysis of Emoji and Emoticon Use in Clinical Texting Systems.

Importance: Emoji and emoticons are quickly becoming an omnipresent feature of virtual communication. As health care systems increasingly adopt clinical texting applications, it is critical to understand how clinicians use these ideograms with colleagues and how it may affect their interactions. Objective: To evaluate the functions that emoji and emoticons serve in clinical text messages. Design, Setting, and Participants: This qualitative study's content analysis of clinical text messages from a secure clinical messaging platform was conducted to assess the communicative function of emoji and emoticons. The analysis included messages sent by hospitalists to other health care clinicians. A subset of a random 1% sample of all message threads, which included at least 1 emoji or emoticon, on a clinical texting system used by a large, Midwestern US hospital from July 2020 until March 2021 were analyzed. A total of 80 hospitalists participated in the candidate threads. Main Outcomes: Whether and what kind of emoji or emoticon was deployed in each reviewed thread was tabulated by the study team. The communicative function of each emoji and emoticon was assessed according to a prespecified coding scheme. Results: A total of 80 hospitalists (49 [61%] male; 30 [37%] Asian, 5 [6%] Black or African American, 2 [3%] Hispanic or Latinx, 42 [53%] White; of 41 with age data, 13 [32%] aged 25-34 years, 19 [46%] aged 35-44 years) participated in the 1319 candidate threads. Within the sample of 1319 threads, 7% of threads (155 unique messages) contained at least 1 emoji or emoticon. The majority (94 [61%]) functioned emotively, that is, conveyed the internal state of the sender, and 49 (32%) served to open, maintain, or close communication. No evidence was identified that they caused confusion or were seen as inappropriate. Conclusions and Relevance: This qualitative study found that when clinicians use emoji and emoticons in secure clinical texting systems, these symbols function primarily to convey new and interactionally salient information. These results suggest that concerns about the professionalism of emoji and emoticon use may be unwarranted.

Texting is caring: a content analysis of clinical text messages by hospitalists.

BACKGROUND: Clinical texting systems (CTS) are widely used in hospitals for team communication about patients. With more institutions adopting such systems, there is a need to understand how texting is being used in clinical practice. METHODS: We conducted content analysis of 809 randomly selected message threads sent to and from hospitalists in a 9-month window. The process, purpose and content of messages were analysed. We also examined messages for personal content (to identify whether CTS was being used for professional matters) and discussion of near miss errors. The risk levels of these near misses were also assessed. RESULTS: Most messages focused on clinical management of patient needs (62%; n=498) and functioned to provide a notification or update regarding clinical care (64%; n=518) or make a request of the recipient (63%; n=510). Personal content was infrequent in message threads (10%; n=80). Five per cent (n=38) of message threads included discussion of a near miss, and most near misses posed low clinical risk overall (66%; n=25). CONCLUSION: Most CTS communication centred around direct clinical management. Fewer messages were focused on non-clinical areas such as administrative tasks or personal communication. Further examination of care delivery, error communication and the consequences of the care discussed in messages would help clinical leaders understand the impact of clinical texting on teamwork and quality of care.

Domain Wall Automotion in Three-Dimensional Magnetic Helical Interconnectors.

The fundamental limits currently faced by traditional computing devices necessitate the exploration of ways to store, compute, and transmit information going beyond the current CMOS-based technologies. Here, we propose a three-dimensional (3D) magnetic interconnector that exploits geometry-driven automotion of domain walls (DWs), for the transfer of magnetic information between functional magnetic planes. By combining state-of-the-art 3D nanoprinting and standard physical vapor deposition, we prototype 3D helical DW conduits. We observe the automotion of DWs by imaging their magnetic state under different field sequences using X-ray microscopy, observing a robust unidirectional motion of DWs from the bottom to the top of the spirals. From experiments and micromagnetic simulations, we determine that the large thickness gradients present in the structure are the main mechanism for 3D DW automotion. We obtain direct evidence of how this tailorable magnetic energy gradient is imprinted in the devices, and how it competes with pinning effects that are due to local changes in the energy landscape. Our work also predicts how this effect could lead to high DW velocities, reaching the Walker limit during automotion. This work demonstrates a possible mechanism for efficient transfer of magnetic information in three dimensions.

Complex free-space magnetic field textures induced by three-dimensional magnetic nanostructures.

The design of complex, competing effects in magnetic systems-be it via the introduction of nonlinear interactions1-4, or the patterning of three-dimensional geometries5,6-is an emerging route to achieve new functionalities. In particular, through the design of three-dimensional geometries and curvature, intrastructure properties such as anisotropy and chirality, both geometry-induced and intrinsic, can be directly controlled, leading to a host of new physics and functionalities, such as three-dimensional chiral spin states7, ultrafast chiral domain wall dynamics8-10 and spin textures with new spin topologies7,11. Here, we advance beyond the control of intrastructure properties in three dimensions and tailor the magnetostatic coupling of neighbouring magnetic structures, an interstructure property that allows us to generate complex textures in the magnetic stray field. For this, we harness direct write nanofabrication techniques, creating intertwined nanomagnetic cobalt double helices, where curvature, torsion, chirality and magnetic coupling are jointly exploited. By reconstructing the three-dimensional vectorial magnetic state of the double helices with soft-X-ray magnetic laminography12,13, we identify the presence of a regular array of highly coupled locked domain wall pairs in neighbouring helices. Micromagnetic simulations reveal that the magnetization configuration leads to the formation of an array of complex textures in the magnetic induction, consisting of vortices in the magnetization and antivortices in free space, which together form an effective B field cross-tie wall14. The design and creation of complex three-dimensional magnetic field nanotextures opens new possibilities for smart materials15, unconventional computing2,16, particle trapping17,18 and magnetic imaging19.

Fabrication of a 3D Nanomagnetic Circuit with Multi-Layered Materials for Applications in Spintronics.

Three-dimensional (3D) spintronic devices are attracting significant research interest due to their potential for both fundamental studies and computing applications. However, their implementations face great challenges regarding not only the fabrication of 3D nanomagnets with high quality materials, but also their integration into 2D microelectronic circuits. In this study, we developed a new fabrication process to facilitate the efficient integration of both non-planar 3D geometries and high-quality multi-layered magnetic materials to prototype 3D spintronic devices, as a first step to investigate new physical effects in such systems. Specifically, we exploited 3D nanoprinting, physical vapour deposition and lithographic techniques to realise a 3D nanomagnetic circuit based on a nanobridge geometry, coated with high quality Ta/CoFeB/Ta layers. The successful establishment of this 3D circuit was verified through magnetotransport measurements in combination with micromagnetic simulations and finite element modelling. This fabrication process provides new capabilities for the realisation of a greater variety of 3D nanomagnetic circuits, which will facilitate the understanding and exploitation of 3D spintronic systems.

Non-Planar Geometrical Effects on the Magnetoelectrical Signal in a Three-Dimensional Nanomagnetic Circuit.

Expanding nanomagnetism and spintronics into three dimensions (3D) offers great opportunities for both fundamental and technological studies. However, probing the influence of complex 3D geometries on magnetoelectrical phenomena poses important experimental and theoretical challenges. In this work, we investigate the magnetoelectrical signals of a ferromagnetic 3D nanodevice integrated into a microelectronic circuit using direct-write nanofabrication. Due to the 3D vectorial nature of both electrical current and magnetization, a complex superposition of several magnetoelectrical effects takes place. By performing electrical measurements under the application of 3D magnetic fields, in combination with macrospin simulations and finite element modeling, we disentangle the superimposed effects, finding how a 3D geometry leads to unusual angular dependences of well-known magnetotransport effects such as the anomalous Hall effect. Crucially, our analysis also reveals a strong role of the noncollinear demagnetizing fields intrinsic to 3D nanostructures, which results in an angular dependent magnon magnetoresistance contributing strongly to the total magnetoelectrical signal. These findings are key to the understanding of 3D spintronic systems and underpin further fundamental and device-based studies.

Relation between microscopic interactions and macroscopic properties in ferroics.

The driving force in materials to spontaneously form states with magnetic or electric order is of fundamental importance for basic research and device technology. The macroscopic properties and functionalities of these ferroics depend on the size, distribution and morphology of domains; that is, of regions across which such uniform order is maintained1. Typically, extrinsic factors such as strain profiles, grain size or annealing procedures control the size and shape of the domains2-5, whereas intrinsic parameters are often difficult to extract due to the complexity of a processed material. Here, we achieve this separation by building artificial crystals of planar nanomagnets that are coupled by well-defined, tuneable and competing magnetic interactions6-9. Aside from analysing the domain configurations, we uncover fundamental intrinsic correlations between the microscopic interactions establishing magnetically compensated order and the macroscopic manifestations of these interactions in basic physical properties. Experiment and simulations reveal how competing interactions can be exploited to control ferroic hallmark properties such as the size and morphology of domains, topological properties of domain walls or their thermal mobility.

Time-resolved imaging of three-dimensional nanoscale magnetization dynamics.

Understanding and control of the dynamic response of magnetic materials with a three-dimensional magnetization distribution is important both fundamentally and for technological applications. From a fundamental point of view, the internal magnetic structure and dynamics in bulk materials still need to be mapped1, including the dynamic properties of topological structures such as vortices2, magnetic singularities3 or skyrmion lattices4. From a technological point of view, the response of inductive materials to magnetic fields and spin-polarized currents is essential for magnetic sensors and data storage devices5. Here, we demonstrate time-resolved magnetic laminography, a pump-probe technique, which offers access to the temporal evolution of a three-dimensional magnetic microdisc with nanoscale resolution, and with a synchrotron-limited temporal resolution of 70 ps. We image the dynamic response to a 500 MHz magnetic field of the complex three-dimensional magnetization in a two-phase bulk magnet with a lateral spatial resolution of 50 nm. This is achieved with a stroboscopic measurement consisting of eight time steps evenly spaced over 2 ns. These measurements map the spatial transition between domain wall motion and the dynamics of a uniform magnetic domain that is attributed to variations in the magnetization state across the phase boundary. Our technique, which probes three-dimensional magnetic structures with temporal resolution, enables the experimental investigation of functionalities arising from dynamic phenomena in bulk and three-dimensional patterned nanomagnets6.

Artificial Double-Helix for Geometrical Control of Magnetic Chirality.

Chirality plays a major role in nature, from particle physics to DNA, and its control is much sought-after due to the scientific and technological opportunities it unlocks. For magnetic materials, chiral interactions between spins promote the formation of sophisticated swirling magnetic states such as skyrmions, with rich topological properties and great potential for future technologies. Currently, chiral magnetism requires either a restricted group of natural materials or synthetic thin-film systems that exploit interfacial effects. Here, using state-of-the-art nanofabrication and magnetic X-ray microscopy, we demonstrate the imprinting of complex chiral spin states via three-dimensional geometric effects at the nanoscale. By balancing dipolar and exchange interactions in an artificial ferromagnetic double-helix nanostructure, we create magnetic domains and domain walls with a well-defined spin chirality, determined solely by the chiral geometry. We further demonstrate the ability to create confined 3D spin textures and topological defects by locally interfacing geometries of opposite chirality. The ability to create chiral spin textures via 3D nanopatterning alone enables exquisite control over the properties and location of complex topological magnetic states, of great importance for the development of future metamaterials and devices in which chirality provides enhanced functionality.

Poling of an artificial magneto-toroidal crystal.

Although ferromagnetism is known to be of enormous importance, the exploitation of materials with a compensated (for example, antiferromagnetic) arrangement of long-range ordered magnetic moments is still in its infancy. Antiferromagnetism is more robust against external perturbations, exhibits ultrafast responses of the spin system1 and is key to phenomena such as exchange bias2,3, magnetically induced ferroelectricity4 or certain magnetoresistance phenomena5. However, there is no conjugate field for the manipulation of antiferromagnetic order, hindering both its observation and direct manipulation. Only recently, direct poling of a particular antiferromagnet was achieved with spintronic approaches6. An interesting alternative to antiferromagnetism is ferrotoroidicity-a recently established fourth form of ferroic order7,8. This is defined as a vortex-like magnetic state with zero net magnetization, yet with a spontaneously occurring toroidal moment9. As a hallmark of ferroic order, there must be a conjugate field that can manipulate the order parameter. For ferrotoroidic materials, this is a toroidal field-a magnetic vortex field violating both space-inversion and time-reversal symmetry analogous to the toroidal moment10. However, the nature and generation of the toroidal field remain elusive for conventional crystalline systems. Here, we demonstrate the creation of an artificial crystal11,12 consisting of mesoscopic planar nanomagnets with a magneto-toroidal-ordered ground state. Effective toroidal fields of either sign are applied by scanning a magnetic tip over the crystal. Thus, we achieve local control over the orientation of the toroidal moment despite its zero net magnetization.

Magnetically Addressable Shape-Memory and Stiffening in a Composite Elastomer.

With a specific stimulus, shape-memory materials can assume a temporary shape and subsequently recover their original shape, a functionality that renders them relevant for applications in fields such as biomedicine, aerospace, and wearable electronics. Shape-memory in polymers and composites is usually achieved by exploiting a thermal transition to program a temporary shape and subsequently recover the original shape. This may be problematic for heat-sensitive environments, and when rapid and uniform heating is required. In this work, a soft magnetic shape-memory composite is produced by encasing liquid droplets of magneto-rheological fluid into a poly(dimethylsiloxane) matrix. Under the influence of a magnetic field, this material undergoes an exceptional stiffening transition, with an almost 30-fold increase in shear modulus. Exploiting this transition, fast and fully reversible magnetic shape-memory is demonstrated in three ways, by embossing, by simple shear, and by unconstrained 3D deformation. Using advanced synchrotron X-ray tomography techniques, the internal structure of the material is revealed, which can be correlated with the composite stiffening and shape-memory mechanism. This material concept, based on a simple emulsion process, can be extended to different fluids and elastomers, and can be manufactured with a wide range of methods.