Application of quasi solid electrolytes in organic based electrochromic devices: A mini review.

The interest in all solid organic based electrochromic devices (ECDs) is on the increase. This is because these devices offer the applicability of electrochromic materials in products such as smart sensors, smart windows, flexible wearables and energy storage devices. The use of quasi-solid electrolytes for the construction of these ECDs is attractive because of their ease of preparation, availability, low cost, improve electrochromic performance, good ionic conductivity and prevention of leakages in ECDs. Hence, in this review, a detailed discussion is presented on the progress in the development of semi-solid electrolytes for ECDs fabrication. The preparation of the most common electrolytes that have been applied for organic based ECDs are summarized. Particular attention is given to efforts and strategies that have been adopted to improve the efficiency of quasi-solid electrolytes. Importantly, knowledge gaps that warrant further research are clearly identified and recommendations for future works are suggested. This review will be very beneficial for both established and new researchers in the field of electrochromic devices and material science.

Methods of changing low molecular weight gel properties through gelation kinetics.

Low molecular weight gels continue to attract notable interest, with many potential applications. However, there are still significant gaps in our understanding of these systems and the correlation between the pre-gel and final gel states. The kinetics of the gelation process plays a crucial role in the bulk properties of the hydrogel and presents an opportunity to fine-tune these systems to meet the requirements of the chosen application. Therefore, it is possible to use a single gelator for multiple applications. This review discusses four ways to modify the pre-gelled structures before triggering gelation. Such modifications can enhance the material's intended performance, which may result in significant advancements in high-tech areas, such as drug delivery, cell culturing, electronics, and tissue engineering.

Using Solution History to Control Hydrogel Properties of a Perylene Bisimide.

pH dependence on water soluble aggregates is well-known in the field of low molecular weight gelators (LMWGs), with different aggregates sometimes having very different properties depending on their final pH. This aggregation determines their applications and performance. Here, we investigate the pH dependence of perylene bisimide gels; initially solutions are formed at a high pH and gels form as the pH is decreased. We find it is not only the final pH but also the starting pH that can impact the resulting gel. We use small angle neutron scattering (SANS), rheology, 1 H NMR spectroscopy and absorption spectroscopy to examine the effect of starting pH on gelation kinetics and final gel properties. Adjusting the solution from pH 9 (where there are few or no aggregates) to pH 6 results in the formation of different worm-like micelles than the ones directly formed at pH 6, leading to again gels with different mechanical properties. This work highlights the importance of controlling the pH of solutions before gelation, but also opens up more possible morphologies and therefore more properties from the same molecule.

Photothermal Perylene Bisimide Hydrogels.

Gels formed using a perylene bisimide (PBI) as a low molecular weight gelator can show the photothermal effect. Formation of the PBI radical anion results in new absorption bands forming, meaning that subsequent irradiation with a wavelength of light overlapping with the new absorption band leads to heating of the gel. This approach can be used to heat the gel, as well as the surrounding milieu. We show how we can use electrochemical methods as well as multicomponent systems to form the radical anion without the need for UV light, and how we can use the photothermal effect to induce phase transitions in the solutions above the gels by exploiting photothermal behavior.

Investigating multigelator systems across multiple length scales.

Preparation of multicomponent systems provides a method for changing the properties of low molecular weight gelator (LMWG)-based systems. Here we have prepared a variety of multicomponent systems where both components are N-functionalised dipeptide-based LMWGs that may either co-assemble or self-sort when mixed. We exemplify how varying the concentration ratio of the two components can be used to tune the properties of the multicomponent systems pre-gelation, during gelation and in the gel state using viscosity and rheology measurements, circular dichroism, NMR and small angle neutron scattering. We also investigate the effect of changing the chirality of a single component on the properties of these systems. While predicting the outcome of multicomponent assembly is a challenge, the preparation of a variety of systems allows us to probe the factors affecting their design. This work provides insights into how the properties of multicomponent systems composed of two gelators with the same basic structural design can be tuned by varying the chirality and the concentration ratio of the two components and considering the behaviour of the two components when alone.

Process Dependent Complexity in Multicomponent Gels.

Mixing low molecular weight gelators (LMWGs) can be used to combine favorable properties of the individual components within a multifunctional gel. Such multicomponent systems are complex enough in themselves but the method of combining components is not commonly considered something to influence self-assembly. Herein, two multicomponent systems comprising of a naphthalene-based dipeptide hydrogelator and one of two modified naphthalene diimides (NDIs), one of which forms gels, and the other does not, are investigated. These systems are probed, examining the structures formed and their gel properties (when preparing a solution from either a mixed powder of both components or by mixing pre-formed solutions of each component) using rheology, small angle neutron scattering (SANS), and absorbance spectroscopy. It is found that by altering the method of preparation, it is can either induce self-sorting or co-assembly within the fibers formed that underpin the gel network.

Mechanical Characterization of Multilayered Hydrogels: A Rheological Study for 3D-Printed Systems.

We describe rheological protocols to study layered and three-dimensional (3D)-printed gels. Our methods allow us to measure the properties at different depths and determine the contribution of each layer to the resulting combined properties of the gels. We show that there are differences when using different measuring systems for rheological measurement, which directly affects the resulting properties being measured. These methods allow us to measure the gel properties after printing, rather than having to rely on the assumption that there is no change in properties from a preprinted gel. We show that the rheological properties of fluorenylmethoxycarbonyl-diphenylalanine (FmocFF) gels are heavily influenced by the printing process.

An Area-Specific, International Community-Led Approach to Understanding and Addressing Equality, Diversity, and Inclusion Issues within Supramolecular Chemistry.

Diversity, equality, and inclusion (DEI/EDI) are pressing issues in chemistry and the natural sciences. In this Essay we share how an area-specific approach is "calling in" the community so that it can act to address EDI issues, and support those who are marginalised. Women In Supramolecular Chemistry (WISC) is an international network that aims to support equality, diversity, and inclusion within supramolecular chemistry. WISC has taken a field-specific approach using qualitative research methods with scientists to identify the support that is needed and the problems the supramolecular community needs to address. Herein, we present survey data from the community which highlight the barriers that are faced by those who take career breaks for any reason, a common example is maternity leave, and the importance of mentoring to aid progression post-PhD. In conclusion, we set out an interdisciplinary and creative approach to addressing EDI issues within supramolecular chemistry.

Mechanoresponsive Self-Assembled Perylene Bisimide Films.

In this work, self-assembled amino-acid appended perylene bisimides (PBIs) have been studied that when processed into thin films change their resistivity in response to being bent. The PBIs assemble into structures in water and form thin films upon drying. These normally delicate thin films can be tolerant to bending, depending on the aggregates they form. Furthermore, the films then reversibly change their resistivity in response to this mechanical stimulus. This change is proportional to the degree of bending of the film giving them the potential to be used quantitatively to measure mechanical movement, such as in wearable devices.

PAINT-ing Fluorenylmethoxycarbonyl (Fmoc)-Diphenylalanine Hydrogels.

Self-assembly of fluorenylmethoxycarbonyl-protected diphenylalanine (FmocFF) in water is widely known to produce hydrogels. Typically, confocal microscopy is used to visualize such hydrogels under wet conditions, that is, without freezing or drying. However, key aspects of hydrogels like fiber diameter, network morphology and mesh size are sub-diffraction limited features and cannot be visualized effectively using this approach. In this work, we show that it is possible to image FmocFF hydrogels by Points Accumulation for Imaging in Nanoscale Topography (PAINT) in native conditions and without direct gel labelling. We demonstrate that the fiber network can be visualized with improved resolution (≈50 nm) both in 2D and 3D. Quantitative information is extracted such as mesh size and fiber diameter. This method can complement the existing characterization tools for hydrogels and provide useful information supporting the design of new materials.

Creating Transient Gradients in Supramolecular Hydrogels.

The self-assembly of low molecular weight gelators in water usually produces homogeneous hydrogels. However, homogeneous gels are not always desired. Using a photoacid generator, it is shown how to form gels with a transient gradient in stiffness, proved using cavitation and bulk rheology. Small-angle neutron scattering is used to show that the gels formed by photoacid are the result of the same structures as when using a conventional pH trigger. Patterned gels can also be formed, again with transient differences in stiffness.

Controlling the Assembly and Properties of Low-Molecular-Weight Hydrogelators.

Low-molecular-weight gels are formed by the self-assembly of small molecules into fibrous networks that can immobilize a significant amount of solvent. Here, we focus on our work with a specific class of gelator, the functionalized dipeptide. We discuss the current state of the art in the area, focusing on how these materials can be controlled. We also highlight interesting and unusual observations and unanswered questions in the field.

Gelation enabled charge separation following visible light excitation using self-assembled perylene bisimides.

Perylene bisimides (PBIs) can be functionalised to enable controlled aggregation into complex supramolecular structures and are promising materials for photovoltaic and solar fuel applications. Amino acid appended PBIs such as PBI-alanine (PBI-A) have been found to form photoconductive films containing worm-like structures that enable charge transport. However, despite being strong chromophores in the visible region, when PBI-A films are prepared by drying down solutions, activity only occurs under UV illumination. This limits potential applications. The requirement for UV illumination has previously been suggested to be due to the large ion-pair energy in the low dielectric environment of the dried samples. Hydrogel films, rehydrated xerogels and dry xerogels of PBI-A can also be prepared offering an ideal sample set to examine the influence of hydration on charge-separation. Using transient absorption (TA) spectroscopy, we demonstrate a correlation between water content and efficiency of generation of long-lived charge separated states within the PBI-A materials, highlighting their potential, particularly for light-driven water splitting.

How should multicomponent supramolecular gels be characterised?

Low molecular weight gels, or supramolecular gels, are formed when small molecules self-assemble into fibrous structures. Above a critical concentration, the entanglement and cross-linking of these structures leads to the formation of a self-supporting gel. There are many examples where a single component is used to form such gels. There is however an ever-increasing interest in using multiple components. Here, if each component is able to form a gel by itself, a range of fibre types are possible, formed by either random or specific associations between the low molecular weight gelators (LMWG). The properties of the networks will depend on how the LMWG assemble into the primary fibrous structures and then how these primary structures entangle. As such, to understand these gels, it is necessary to understand the networks across multiple length scales. Here, we discuss the current state of the art, the effectiveness of the different techniques that have been used, and hopefully provide the impetus for the field to move away from the cartoon-level discussion of assembly.

Controlled Tuning of the Properties in Optoelectronic Self-Sorted Gels.

Multicomponent supramolecular gels have great potential for optoelectronics. Ideally, we could control the self-assembly of multiple components across many length scales, from the primary assembled structures to how these are arranged in space. This would allow energy transfer between p-type and n-type fibers to be controlled. Usually, a single network is formed and analyzed. It is not clear how most networks could be modified, and certainly not how these might be differentiated. Here, we address both of these issues. We show how the different components in a multicomponent gel can be differentiated by small-angle neutron scattering using contrast-matching experiments. The rate of self-assembly can be used to vary the networks that are formed, leading directly to changes in the efficiency of electron transfer. The assembly kinetics can therefore be used to prepare different networks from the same primary building blocks and primary self-assembled structures. We expect that these advances will allow multicomponent systems to become effective electronic materials.

Controlling Photoconductivity in PBI Films by Supramolecular Assembly.

Perylene bisimides (PBIs) self-assemble in solution. The solubility of the PBIs is commonly changed through the choice of substituents at the imide positions. It is generally assumed this substitution does not affect the electronic properties of the PBI, and that the properties of the self-assembled aggregate are essentially that of the isolated molecule. However, substituents do affect the self-assembly, resulting in potentially different packing in the formed aggregates. Here, we show that the photoconductivity of films formed from a library of substituted PBIs varies strongly with the substituent and demonstrate that this is due to the different ways in which they pack. Our results open the possibility for tuning the optoelectronic properties of self-assembled PBIs by controlling the aggregate structure through careful choice of substituent, as demonstrated by us here optimising the photoconductivity of PBI films in this way.

P-Type Low-Molecular-Weight Hydrogelators.

As the use of low-molecular-weight gelators (LMWGs) as components in single and multicomponent systems for optoelectronic and solar cell applications increases, so does the need for more functional gelators. There are relatively few examples of p-type gelators that can be used in such systems. Here, the synthesis and characterization of three amino-acid-functionalized p-type gelators based on terthiophene, tetrathiafulvalene, and oligo(phenylenevinylene) are described. The cores of these molecules are already used as electron donors in optoelectronic applications. These newly designed molecules can gel water to form highly organized structures, which can be dried into thin films that show p-type behavior.

Kinetically Controlled Coassembly of Multichromophoric Peptide Hydrogelators and the Impacts on Energy Transport.

We report a peptide-based multichromophoric hydrogelator system, wherein π-electron units with different inherent spectral energies are spatially controlled within peptidic 1-D nanostructures to create localized energy gradients in aqueous environments. This is accomplished by mixing different π-conjugated peptides prior to initiating self-assembly through solution acidification. We can vary the kinetics of the assembly and the degree of self-sorting through the choice of the assembly trigger, which changes the kinetics of acidification. The hydrolysis of glucono-δ-lactone (GdL) provides a slow pH drop that allows for stepwise triggering of peptide components into essentially self-sorted nanostructures based on subtle pKa differences, whereas HCl addition leads to a rapid formation of mixed components within a nanostructure. Using 1H NMR spectroscopy and fiber X-ray diffraction, we determine the conditions and peptide mixtures that favor self-sorting or intimate comixing. Photophysical investigations in the solution phase provide insight into the correlation of energy-transport processes occurring within the assemblies to the structural organization of the π-systems.

Nonlinear Effects in Multicomponent Supramolecular Hydrogels.

Multicomponent low molecular weight gels are useful for a range of applications. However, when mixing two components, both of which can independently form a gel, there are many potential scenarios. There is a limited understanding as to how to control and direct the assembly. Here, we focus on a pH-triggered two-component system. At high pH, colloidal structures are formed, and there is a degree of mixing of the two gelators. As the pH is decreased, there is a complex situation, where one gelator directs the assembly in a "sergeants and soldiers" manner. The second gelator is not fully incorporated, and the remainder forms an independent network. The result is that there is a nonlinear dependence on the final mechanical properties of the gels, with the storage or loss modulus being very dependent on the absolute ratio of the two components in the system.