Spontaneous Lithiation of Binary Oxides during Epitaxial Growth on LiCoO2.

Epitaxial growth is a powerful tool for synthesizing heterostructures and integrating multiple functionalities. However, interfacial mixing can readily occur and significantly modify the properties of layered structures, particularly for those containing energy storage materials with smaller cations. Here, we show a two-step sequence involving the growth of an epitaxial LiCoO2 cathode layer followed by the deposition of a binary transition metal oxide. Orientation-controlled epitaxial synthesis of the model solid-state-electrolyte Li2WO4 and anode material Li4Ti5O12 occurs as WO3 and TiO2 nucleate and react with Li ions from the underlying cathode. We demonstrate that this lithiation-assisted epitaxy approach can be used for energy materials discovery and exploring different combinations of epitaxial interfaces that can serve as well-defined model systems for mechanistic studies of energy storage and conversion processes.

Structure, Magnetism, and the Interaction of Water with Ti-Doped Fe3O4 Surfaces.

The functionality of magnetite, Fe3O4, for catalysis and spintronics applications is dependent on the molar ratio of Fe2+ and Fe3+ and their distribution at the surface. In turn, this depends on a poorly understood interplay between crystallographic orientation, dopants, and the reactive adsorption of atmospheric species such as water. Here, (100)-, (110)-, and (111)-oriented films of titano-magnetite, Fe(3-x)TixO4, were grown by pulsed laser deposition and their composition, valence distribution, magnetism, and interaction with water were studied by ambient pressure X-ray photoelectron spectroscopy (AP-XPS) and X-ray magnetic circular dichroism. Although the bulk compositions match the desired stoichiometry, the surfaces were found to be enriched in Ti4+, especially the top 1 nm. The highest surface energy (110) film was the most reduced, tied to local Ti enrichment, and a corresponding decreased magnetic moment. AP-XPS showed that incorporation of x = 0.25 Ti dramatically lowered the propensity to form hydroxyl species at a given relative humidity, and also that hydroxylation is relatively invariant with orientation. In contrast, the affinity for water is similar across orientations, regardless of Ti incorporation, suggesting that relative humidity controls its uptake. The findings may help demystify the interactions that lead to specific distributions of Fe2+ and Fe3+ at magnetite surfaces, toward design of more deliberately active catalysts and magnetic devices.

Direct Visualization of Li Dendrite Effect on LiCoO2 Cathode by In Situ TEM.

Nonuniform and highly localized Li dendrites are known to cause deleterious and, in many cases, catastrophic effects on the performance of rechargeable Li batteries. However, the mechanisms of cathode failures upon contact with Li metal are far from clear. In this study, using in situ transmission electron microscopy, the interaction of Li metal with well-defined, epitaxial thin films of LiCoO2 , the most widely used cathode material, is directly visualized at an atomic scale. It is shown that a spontaneous and prompt chemical reaction is triggered once Li contact is made, leading to expansion and pulverization of LiCoO2 and ending with the final reaction products of Li2 O and Co metal. A topotactic phase transition is identified close to the reaction front, resulting in the formation of CoO as a metastable intermediate. Dynamic structural and chemical imaging, in combination with ab initio simulations, reveal that a high density of grain and antiphase boundaries is formed at the reaction front, which are critical for enabling the short-range topotactic reactions and long-range Li propagation. The fundamental insights are of general importance in mitigating Li dendrites related issues and guiding the design principle for more robust energy materials.

Reduced Magnetism in Core-Shell Magnetite@MOF Composites.

The magnetic susceptibility of synthesized magnetite (Fe3O4) microspheres was found to decline after the growth of a metal-organic framework (MOF) shell on the magnetite core. Detailed structural analysis of the core-shell particles using scanning electron microscopy, transmission electron microscopy, atom probe tomography, and57Fe-Mössbauer spectroscopy suggests that the distribution of MOF precursors inside the magnetic core resulted in the oxidation of the iron oxide core.

Metal-insulator photocathode heterojunction for directed electron emission.

We use angle-resolved photoemission under ultraviolet laser excitation to demonstrate that the electron emission properties of Ag(001) can be markedly enhanced and redirected along the surface normal by the deposition of a few monolayers of epitaxial MgO. We observe new low-binding energy states with small spreads in their surface parallel momenta as a result of MgO/Ag(001) interface formation. Under 4.66 eV laser excitation, the quantum efficiency of MgO/Ag(001) is a factor of 7 greater than that of clean Ag(001), revealing the utility of such heterojunctions as advanced photocathodes.

Effect of Solvent Composition on Non-DLVO Forces and Oriented Attachment of Zinc Oxide Nanoparticles.

Oriented attachment (OA) occurs when nanoparticles in solution align their crystallographic axes prior to colliding and subsequently fuse into single crystals. Traditional colloidal theories such as DLVO provide a framework for evaluating OA but fail to capture key particle interactions due to the atomistic details of both the crystal structure and the interfacial solution structure. Using zinc oxide as a model system, we investigated the effect of the solvent on short-ranged and long-ranged particle interactions and the resulting OA mechanism. In situ TEM imaging showed that ZnO nanocrystals in toluene undergo long-range attraction comparable to 1kT at separations of 10 nm and 3kT near particle contact. These observations were rationalized by considering non-DLVO interactions, namely, dipole-dipole forces and torques between the polar ZnO nanocrystals. Langevin dynamics simulations showed stronger interactions in toluene compared to methanol solvents, consistent with the experimental results. Concurrently, we performed atomic force microscopy measurements using ZnO-coated probes for the short-ranged interaction. Our data are relevant to another type of non-DLVO interaction, namely, the repulsive solvation force. Specifically, the solvation force was stronger in water compared to ethanol and methanol, due to the stronger hydrogen bonding and denser packing of water molecules at the interface. Our results highlight the importance of non-DLVO forces in a general framework for understanding and predicting particle aggregation and attachment.

Manganese doping of magnetic iron oxide nanoparticles: tailoring surface reactivity for a regenerable heavy metal sorbent.

A method for tuning the analyte affinity of magnetic, inorganic nanostructured sorbents for heavy metal contaminants is described. The manganese-doped iron oxide nanoparticle sorbents have a remarkably high affinity compared to the precursor material. Sorbent affinity can be tuned toward an analyte of interest simply by adjustment of the dopant quantity. The results show that following the Mn doping process there is a large increase in affinity and capacity for heavy metals (i.e., Co, Ni, Zn, As, Ag, Cd, Hg, and Tl). Capacity measurements were carried out for the removal of cadmium from river water and showed significantly higher loading than the relevant commercial sorbents tested for comparison. The reduction in Cd concentration from 100 ppb spiked river water to 1 ppb (less than the EPA drinking water limit of 5 ppb for Cd) was achieved following treatment with the Mn-doped iron oxide nanoparticles. The Mn-doped iron oxide nanoparticles were able to load ~1 ppm of Cd followed by complete stripping and recovery of the Cd with a mild acid wash. The Cd loading and stripping is shown to be consistent through multiple cycles with no loss of sorbent performance.

Antibody recognition force microscopy shows that outer membrane cytochromes OmcA and MtrC are expressed on the exterior surface of Shewanella oneidensis MR-1.

Antibody recognition force microscopy showed that OmcA and MtrC are expressed on the exterior surface of living Shewanella oneidensis MR-1 cells when Fe(III), including solid-phase hematite (Fe(2)O(3)), was the terminal electron acceptor. OmcA was localized to the interface between the cell and mineral. MtrC displayed a more uniform distribution across the cell surface. Both cytochromes were associated with an extracellular polymeric substance.

Coupled Lattice Polarization and Ferromagnetism in Multiferroic NiTiO3 Thin Films.

Polarization-induced weak ferromagnetism (WFM) was demonstrated a few years back in LiNbO3-type compounds, MTiO3 (M = Fe, Mn, Ni). Although the coexistence of ferroelectric polarization and ferromagnetism has been demonstrated in this rare multiferroic family before, first in bulk FeTiO3, then in thin-film NiTiO3, the coupling of the two order parameters has not been confirmed. Here, we report the stabilization of polar, ferromagnetic NiTiO3 by oxide epitaxy on a LiNbO3 substrate utilizing tensile strain and demonstrate the theoretically predicted coupling between its polarization and ferromagnetism by X-ray magnetic circular dichroism under applied fields. The experimentally observed direction of ferroic ordering in the film is supported by simulations using the phase-field approach. Our work validates symmetry-based criteria and first-principles calculations of the coexistence of ferroelectricity and WFM in MTiO3 transition metal titanates crystallizing in the LiNbO3 structure. It also demonstrates the applicability of epitaxial strain as a viable alternative to high-pressure crystal growth to stabilize metastable materials and a valuable tuning parameter to simultaneously control two ferroic order parameters to create a multiferroic. Multiferroic NiTiO3 has potential applications in spintronics where ferroic switching is used, such as new four-stage memories and electromagnetic switches.

High-performance, superparamagnetic, nanoparticle-based heavy metal sorbents for removal of contaminants from natural waters.

We describe the synthesis and characterization of high-performance, superparamagnetic, iron oxide nanoparticle-based, heavy metal sorbents, which demonstrate excellent affinity for the separation of heavy metals in contaminated water systems (i.e., spiked Columbia River water). The magnetic nanoparticle sorbents were prepared from an easy-to-synthesize iron oxide precursor, followed by a simple, one-step ligand exchange reaction to introduce an affinity ligand to the nanoparticle surface that is specific to a heavy metal or class of heavy metal contaminants. The engineered magnetic nanoparticle sorbents have inherently high active surface areas, allowing for increased binding capacities. To demonstrate the performance of the nanoparticle sorbents, river water was spiked with specific metals and exposed to low concentrations of the functionalized nanoparticles. In almost all cases, the nanoparticles were found to be superior to commercially available sorbent materials as well as the unfunctionalized iron oxide nanoparticles.

Specific bonds between an iron oxide surface and outer membrane cytochromes MtrC and OmcA from Shewanella oneidensis MR-1.

Shewanella oneidensis MR-1 is purported to express outer membrane cytochromes (e.g., MtrC and OmcA) that transfer electrons directly to Fe(III) in a mineral during anaerobic respiration. A prerequisite for this type of reaction would be the formation of a stable bond between a cytochrome and an iron oxide surface. Atomic force microscopy (AFM) was used to detect whether a specific bond forms between a hematite (Fe(2)O(3)) thin film, created with oxygen plasma-assisted molecular beam epitaxy, and recombinant MtrC or OmcA molecules coupled to gold substrates. Force spectra displayed a unique force signature indicative of a specific bond between each cytochrome and the hematite surface. The strength of the OmcA-hematite bond was approximately twice that of the MtrC-hematite bond, but direct binding to hematite was twice as favorable for MtrC. Reversible folding/unfolding reactions were observed for mechanically denatured MtrC molecules bound to hematite. The force measurements for the hematite-cytochrome pairs were compared to spectra collected for an iron oxide and S. oneidensis under anaerobic conditions. There is a strong correlation between the whole-cell and pure-protein force spectra, suggesting that the unique binding attributes of each cytochrome complement one another and allow both MtrC and OmcA to play a prominent role in the transfer of electrons to Fe(III) in minerals. Finally, by comparing the magnitudes of binding force for the whole-cell versus pure-protein data, we were able to estimate that a single bacterium of S. oneidensis (2 by 0.5 microm) expresses approximately 10(4) cytochromes on its outer surface.