A Combined UWB/IMU Localization Method with Improved CKF.

Aiming at the problem that ultra-wide band (UWB) cannot be accurately localized in environments with large noise variations and unknown statistical properties, a combinatorial localization method based on improved cubature (CKF) is proposed. First, in order to overcome the problem of inaccurate local approximation or even the inability to converge due to the initial value not being set near the optimal solution in the process of solving the UWB position by the least-squares method, the Levenberg-Marquardt algorithm (L-M) is adopted to optimally solve the UWB position. Secondly, because UWB and IMU information are centrally fused, an adaptive factor is introduced to update the measurement noise covariance matrix in real time to update the observation noise, and the fading factor is added to suppress the filtering divergence to achieve an improvement for the traditional CKF algorithm. Finally, the performance of the proposed combined localization method is verified by field experiments in line-of-sight (LOS) and non-line-of-sight (NLOS) scenarios, respectively. The results show that the proposed method can maintain high localization accuracy in both LOS and NLOS scenarios. Compared with the Extended Kalman filter (EKF), unbiased Kalman filter (UKF), and CKF algorithms, the localization accuracies of the proposed method in NLOS scenarios are improved by 25.2%, 18.3%, and 11.3%, respectively.

A Robotic Solution for Precision Smoothing and Roughening of Precast Concrete Surfaces: Design and Experimental Validation.

Prefabricated construction has pioneered a new model in the construction industry, where prefabricated component modules are produced in factories and assembled on-site by construction workers, resulting in a highly efficient and convenient production process. Within the construction industry value chain, the smoothing and roughening of precast concrete components are critical processes. Currently, these tasks are predominantly performed manually, often failing to achieve the desired level of precision. This paper designs and develops a robotic system for smoothing and roughening precast concrete surfaces, along with a multi-degree-of-freedom integrated intelligent end-effector for smoothing and roughening. Point-to-point path planning methods are employed to achieve comprehensive path planning for both smoothing and roughening, enhancing the diversity of textural patterns using B-spline curves. In the presence of embedded obstacles, a biologically inspired neural network method is introduced for precise smoothing operation planning, and the A* algorithm is incorporated to enable the robot's escape from dead zones. Experimental validation further confirms the feasibility of the entire system and the accuracy of the machining path planning methods. The experimental results demonstrate that the proposed system meets the precision requirements for smoothing and offers diversity in roughening, affirming its practicality in the precast concrete process and expanding the automation level and application scenarios of robots in the field of prefabricated construction.

A Minimalist Self-Localization Approach for Swarm Robots Based on Active Beacon in Indoor Environments.

When performing indoor tasks, miniature swarm robots are suffered from their small size, poor on-board computing power, and electromagnetic shielding of buildings, which means that some traditional localization methods, such as global positioning system (GPS), simultaneous localization and mapping (SLAM), and ultra-wideband (UWB), cannot be employed. In this paper, a minimalist indoor self-localization approach for swarm robots is proposed based on active optical beacons. A robotic navigator is introduced into a swarm of robots to provide locally localization services by actively projecting a customized optical beacon on the indoor ceiling, which contains the origin and the reference direction of localization coordinates. The swarm robots observe the optical beacon on the ceiling via a bottom-up-view monocular camera, and extract the beacon information on-board to localize their positions and headings. The uniqueness of this strategy is that it uses the flat, smooth, and well-reflective ceiling in the indoor environment as a ubiquitous plane for displaying the optical beacon; meanwhile, the bottom-up view of swarm robots is not easily blocked. Real robotic experiments are conducted to validate and analyze the localization performance of the proposed minimalist self-localization approach. The results show that our approach is feasible and effective, and can meet the needs of swarm robots to coordinate their motion. Specifically, for the stationary robots, the average position error and heading error are 2.41 cm and 1.44°; when the robots are moving, the average position error and heading error are less than 2.40 cm and 2.66°.

Electronic, Mechanical and Elastic Anisotropy Properties of X-Diamondyne (X = Si, Ge).

The three-dimensional (3D) diamond-like semiconductor materials Si-diamondyne and Ge-diamondyne (also called SiC4 and GeC4) are studied utilizing density functional theory in this work, where the structural, elastic, electronic and mechanical anisotropy properties along with the minimum thermal conductivity are considered. SiC4 and GeC4 are semiconductor materials with direct band gaps and wide band gaps of 5.02 and 5.60 eV, respectively. The Debye temperatures of diamondyne, Si- and Ge-diamondyne are 422, 385 and 242 K, respectively, utilizing the empirical formula of the elastic modulus. Among these, Si-diamondyne has the largest mechanical anisotropy in the shear modulus and Young's modulus, and Diamond has the smallest mechanical anisotropy in the Young's modulus and shear modulus. The mechanical anisotropy in the Young's modulus and shear modulus of Si-diamondyne is more than three times that of diamond as determined by the characterization of the ratio of the maximum value to the minimum value. The minimum thermal conductivity values of Si- and Ge-diamondyne are 0.727 and 0.524 W cm-1 K-1, respectively, and thus, Si- and Ge-diamondyne may be used in the thermoelectric industry.