Reactive Inkjet Printing of Functional Silk Stirrers for Enhanced Mixing and Sensing.

Stirring small volumes of solution can reduce immunoassay readout time, homogenize cell cultures, and increase enzyme reactivity in bioreactors. However, at present many small scale stirring methods require external actuation, which can be cumbersome. To address this, here, reactive inkjet printing is shown to be able to produce autonomously rotating biocompatible silk-based microstirrers that can enhance fluid mixing. Rotary motion is generated either by release of a surface active agent (small molecular polyethylene glycol) resulting in Marangoni effect, or by catalytically powered bubble propulsion. The Marangoni driven devices do not require any chemicals to be added to the fluid as the "fuel," while the catalytically powered devices are powered by decomposing substrate molecules in solution. A comparison of Marangoni effect and enzyme powered stirrers is made. Marangoni effect driven stirrers rotate up to 600 rpm, 75-100-fold faster than enzyme driven microstirrers, however enzyme powered stirrers show increased longevity. Further to stirring applications, the sensitivity of the motion generation mechanisms to fluid properties allows the rotating devices to also be exploited for sensing applications, for example, acting as motion sensors for water pollution.

Catalytic Janus Colloids: Controlling Trajectories of Chemical Microswimmers.

Catalytic Janus colloids produce rapid motion in fluids by decomposing dissolved fuel. There is great potential to exploit these "autonomous chemical swimmers" in applications currently performed by diffusion limited passive colloids. Key application areas for colloids include transporting active ingredients for drug delivery, gathering analytes for medical diagnostics, and self-assembling into regular structures used for photonic materials and lithographic templating. For drug delivery and medical diagnostics, controlling colloidal motion is key in order to target therapies, and transport analytes through lab-on-a-chip devices. Here, the autonomous motion of catalytic Janus colloids can remove the current requirements to induce and control colloid motion using external fields, thereby reducing the technological complexity required for medical therapies and diagnostics. For materials applications exploiting colloidal self-assembly, the additional interactions introduced by catalytic activity and rapid motion are predicted to allow access to new reconfigurable and responsive structures. In order to realize these goals, it is vital to develop methods to control both individual colloidal paths and collective behavior in motile catalytic colloidal systems. However, catalytic Janus colloids' trajectories are randomized by Brownian effects, and so require new strategies in order to be harnessed for transport. This is achievable using a variety of different approaches. For example, self-assembly and control of catalyst geometry can introduce controlled amounts of rotary motion, or "spin" into chemical swimmer trajectories. Furthermore, rotary motion combined with gravity, produces well-defined orientated helical trajectories. In addition, when catalytic colloids interact with topographical features, such as edges and trenches, they are steered. This gives rise to a new approach for autonomous colloidal microfluidic transport that could be deployed in future lab-on-a-chip devices. Chemical gradients can also influence the motion of catalytic Janus colloids, for example, to cause collective accumulations at specific locations. However, at present, the predicted theoretical degree of control over this phenomenon has not been fully verified in experimental systems. Collective behavior control for chemical swimmers is also possible by exploiting the potential for the complex interactions in these systems to allow access to self-assembled, dynamic and reconfigurable ordered structures. Again, current experiments have not yet accessed the breadth of possible behavior. Consequently, continued efforts are required to understand and control these interaction mechanisms in real world systems. Ultimately, this will help realize the use of catalytic Janus colloids for tasks that require well-controlled motion and structural organization, enabling functions such as analyte capture and concentration, or targeted drug delivery.

Symmetrical Catalytically Active Colloids Collectively Induce Convective Flow.

Although much attention has focused on self-motile asymmetrical catalytically active "Janus" colloids as a route to enable new fluidic transport applications, the motion of symmetrical catalytically active colloids is less investigated. This is despite isotropically active colloids being more accessible and commonly used as supports for heterogeneous catalysis. Here, we addressed this by systematically investigating the motion of platinum-coated colloids capable of isotropically decomposing hydrogen peroxide. We observed the onset of collective convective flow as the colloidal volume fraction increased above a threshold. The ballistic velocities induced by the collective flow were quantified by particle tracking and were found to increase with the volume fraction. We also determined the associated increase in the Péclet number as evidence of the potential to use convection as a simple method to enhance mass transport rates. By determining the persistence lengths, we were able to correlate the magnitude of convective flow with the overall catalytic activity per unit volume. This suggests that the mechanism for the collective flow is driven by chemical activity-induced local density differences. Finally, we discussed these results in the context of potential new fluidic applications and highlighted the role that activity-induced convection may play in experiments designed to investigate self-motile catalytic systems.

Helical paths, gravitaxis, and separation phenomena for mass-anisotropic self-propelling colloids: Experiment versus theory.

The self-propulsion mechanism of active colloidal particles often generates not only translational but also rotational motion. For particles with an anisotropic mass density under gravity, the motion is usually influenced by a downwards oriented force and an aligning torque. Here we study the trajectories of self-propelled bottom-heavy Janus particles in three spatial dimensions both in experiments and by theory. For a sufficiently large mass anisotropy, the particles typically move along helical trajectories whose axis is oriented either parallel or antiparallel to the direction of gravity (i.e., they show gravitaxis). In contrast, if the mass anisotropy is small and rotational diffusion is dominant, gravitational alignment of the trajectories is not possible. Furthermore, the trajectories depend on the angular self-propulsion velocity of the particles. If this component of the active motion is strong and rotates the direction of translational self-propulsion of the particles, their trajectories have many loops, whereas elongated swimming paths occur if the angular self-propulsion is weak. We show that the observed gravitational alignment mechanism and the dependence of the trajectory shape on the angular self-propulsion can be used to separate active colloidal particles with respect to their mass anisotropy and angular self-propulsion, respectively.

Reactive Inkjet Printing of Biocompatible Enzyme Powered Silk Micro-Rockets.

Inkjet-printed enzyme-powered silk-based micro-rockets are able to undergo autonomous motion in a vast variety of fluidic environments including complex media such as human serum. By means of digital inkjet printing it is possible to alter the catalyst distribution simply and generate varying trajectory behavior of these micro-rockets. Made of silk scaffolds containing enzymes these micro-rockets are highly biocompatible and non-biofouling.

Mode of lysozyme protein adsorption at end-tethered polyethylene oxide brushes on gold surfaces determined by neutron reflectivity.

The mode of lysozyme protein adsorption at end-tethered thiol-terminated polyethylene oxide brushes grafted upon gold was determined in situ by neutron reflectivity using the INTER instrument at target station 2, ISIS, RAL, UK. It was found that the most probable position of protein adsorption at these weakly protein resistive brushes was at the gold-brush interface in the so-called primary protein position.

On the mechanisms of colloidal self-assembly during spin-coating.

Spin-coating offers a facile fabrication route for the production of high quality colloidal crystals, which have potential as photonic band-gap materials. This paper presents the results of direct observations of the self-assembly of latex colloids during spin-coating through the use of stroboscopic microscopy. We have been able to identify several mechanisms by which self-assembly occurs, depending upon the dispersion properties, such as particle weight fraction, solvent volatility and viscosity. Through the use of stroboscopic microscopy we have directly observed ordering occurring due to high concentrations of colloid particles (where volatility is relatively low), resulting in the formation of regular close packed ordered particle arrays. Conversely when the system in spun-cast from a much more volatile solvent, highly disordered non-equilibrium arrangements of particles form. When spin-coating a low concentration, low volatility dispersion, ordering is dominated by the occurrence of capillary drying fronts, which drag the particles into ordered arrangements. At a volatility intermediate to that of water and ethanol, ordering occurring predominantly via shear forces. Finally when the volatility is increased beyond the shear ordering regime, excessive shear leads to the occurrence of drying fronts within the system and so again, capillary forces induce a large degree of order within the final film.

Gravitaxis in spherical Janus swimming devices.

In this work, we show that the asymmetrical distribution of mass at the surface of catalytic Janus swimmers results in the devices preferentially propelling themselves upward in a gravitational field. We demonstrate the existence of this gravitaxis phenomenon by observing the trajectories of fueled Janus swimmers, which generate thrust along a vector pointing away from their metallically coated half. We report that as the size of the spherical swimmer increases, the propulsive trajectories are no longer isotropic with respect to gravity, and they start to show a pronounced tendency to move in an upward direction. We suggest that this effect is due to the platinum caps asymmetric mass exerting an increasing influence on the azimuthal angle of the Janus sphere with size, biasing its orientation toward a configuration where the heavier propulsion generating surface faces down. This argument is supported by the good agreement we find between the experimentally observed azimuthal angle distribution for the Janus swimmers and predictions made by simple Boltzmann statistics. This gravitaxis phenomenon provides a mechanism to autonomously control and direct the motion of catalytic swimming devices and so enable a route to make autonomous transport devices and develop new separation, sensing, and controlled release applications.

Symmetrical Catalytic Colloids Display Janus-Like Active Brownian Particle Motion.

Catalytic Janus colloids, with one hemi-sphere covered by a hydrogen peroxide reduction catalyst such as platinum, represent one of the most experimentally explored examples of self-motile active colloid systems. This paper comparatively investigates the motile behavior of symmetrical catalytic colloids produced by a solution-based metal salt reduction process. Despite the significant differences in the distribution of catalytic activity, this study finds that the motion produced by symmetrical colloids is equivalent to that previously reported for Janus colloids. It also shows that introducing a Janus structure to the symmetrical colloids via masking does not significantly modify their motion. These findings could indicate that very subtle variations in surface reactivity can be sufficient to produce Janus-like active Brownian particle-type motion, or that a symmetry-breaking phenomena is present. The study will consequently motivate fresh theoretical attention and also demonstrate a straightforward route to access large quantities of motile active colloids, which are expected to show subtly different phenomenology compared to those with Janus structures.

Importance of particle tracking and calculating the mean-squared displacement in distinguishing nanopropulsion from other processes.

In this paper we show that processes such as Brownian motion, convection, sedimentation, and bacterial contamination can cause small particles to move through liquids in a fashion which may be mistaken as nanopropulsion. It is shown that particle tracking and subsequent statistical analysis is essential to ascertain if small particles actually propel themselves, or if they are propelled by another process. Specifically we find that it is necessary to calculate the mean-squared displacement of particles at both short and long time intervals, to show that the direction of propulsion changes coincident with rotation of the particle by Brownian motion, as this allows nanopropulsion to be differentiated from Brownian motion, convection and sedimentation. We also find that bacteria can attach themselves to particles and cause them to be propelled. This leads to motion which appears very similar to nanopropulsion and cannot be differentiated using particle tracking and therefore find that carefully designed control experiments must be performed. Finally, we suggest an experimental protocol which can be used to investigate the motion of small objects and prove if they move due to nanopropulsion.

3D inkjet printed self-propelled motors for micro-stirring.

HYPOTHESIS: Microscopic self-propelled motors (SPMs) are an area of active research, but very little investigation has been conducted on millimetre-scale or macroscopic SPMs and exploring their potential in biomedical research. In this study, we tested if 3D reactive inkjet (RIJ) printing could be used for precise fabrication of millimetre-scale self-propelled motors (SPMs) with well-defined shapes from regenerated silk fibroin (RSF) by converting water soluble RSF (silk I) to insoluble silk fibroin (silk II). Secondly, we compared the different propulsion behaviour of the SPMs to put forward the best geometry and propulsion mechanism for potential applications in enhancing the sensitivity of diffusion-rate limited biomedical assays by inducing fluid flow. EXPERIMENTS: SPMs with four different geometric shapes and propelled by two different mechanisms (catalysis and surface tension gradient) were fabricated by 3D RIJ printing and compared. For bubble propulsion, the structures were selectively doped in specific regions with the enzyme catalase in order to produce motion via bubble generation and detachment in hydrogen peroxide solutions. For surface tension propulsion, PEG400-doped structures were propelled through surface tension gradients caused by leaching of PEG400 surfactant in deionized water. FINDINGS: The results demonstrated the ability of 3D inkjet printing to fabricate SPMs with desired propulsion mechanism and fine-tune the propulsion by precisely fabricating the different geometric shapes. The resulting 3D structures were capable of generating motion without external actuation, thereby enabling applications in biomedicine such as micro-stirring small fluid volumes to enhance biological assay sensitivity. The surface tension gradient caused by the leaching of surfactant led to faster propulsion velocities with smooth deceleration, whereas, in comparison, catalysis-induced bubble propulsion tended to be jerky and uneven in deceleration, and therefore less suitable for aforementioned applications. Computational fluid dynamic simulations were used to compare the various experimental SPMs ability to enhance mixing when deployed within 96-well plate microwells, to reveal the effect of both SPM shape and motion character on performance, and show viability for small scale mixing applications.

C9ORF72-derived poly-GA DPRs undergo endocytic uptake in iAstrocytes and spread to motor neurons.

Dipeptide repeat (DPR) proteins are aggregation-prone polypeptides encoded by the pathogenic GGGGCC repeat expansion in the C9ORF72 gene, the most common genetic cause of amyotrophic lateral sclerosis and frontotemporal dementia. In this study, we focus on the role of poly-GA DPRs in disease spread. We demonstrate that recombinant poly-GA oligomers can directly convert into solid-like aggregates and form characteristic ß-sheet fibrils in vitro. To dissect the process of cell-to-cell DPR transmission, we closely follow the fate of poly-GA DPRs in either their oligomeric or fibrillized form after administration in the cell culture medium. We observe that poly-GA DPRs are taken up via dynamin-dependent and -independent endocytosis, eventually converging at the lysosomal compartment and leading to axonal swellings in neurons. We then use a co-culture system to demonstrate astrocyte-to-motor neuron DPR propagation, showing that astrocytes may internalise and release aberrant peptides in disease pathogenesis. Overall, our results shed light on the mechanisms of poly-GA cellular uptake and propagation, suggesting lysosomal impairment as a possible feature underlying the cellular pathogenicity of these DPR species.

Direct observation of the direction of motion for spherical catalytic swimmers.

Nonconductive Janus particle swimmers made by coating fluorescent polymer beads with hemispheres of platinum have been fully characterized using video microscopy to reveal that they undergo propulsion in hydrogen peroxide fuel away from the catalytic platinum patch. The platinum coating shadows the fluorescence signal from half of each swimmer to allow the orientation to be observed directly and correlated quantitatively with the resulting swimming direction. The observed swimmer direction is consistent with both the bubble release and diffusiophoretic propulsion mechanisms.

Influence of Additives on the In Situ Crystallization Dynamics of Methyl Ammonium Lead Halide Perovskites.

Understanding the kinetics of the crystallization process for organometal halide perovskite formation is critical in determining the crystalline, nanoscale morphology and therefore the electronic properties of the films produced during thin film formation from solution. In this work, in situ grazing incidence small-angle X-ray scattering (GISAXS) and optical microscopy measurements are used to investigate the processes of nucleation and growth of pristine mixed halide perovskite (MAPbI3-x Cl x ) crystalline films deposited by bar coating at 60 °C, with and without additives in the solution. A small amount of 1,8-diiodooctane (DIO) and hydriodic acid (HI) added to MAPbI3-x Cl x is shown to increase the numbers of nucleation centers promoting heterogeneous nucleation and accelerate and modify the size of nuclei during nucleation and growth. A generalized formation mechanism is derived from the overlapping parameters obtained from real-time GISAXS and optical microscopy, which revealed that during nucleation, perovskite precursors cluster before becoming the nuclei that function as elemental units for subsequent formation of perovskite crystals. Additive-free MAPbI3-x Cl x follows reaction-controlled growth, in contrast with when DIO and HI are present, and it is highly possible that the growth then follows a hindered diffusion-controlled mechanism. These results provide important details of the crystallization mechanisms occurring and will help to develop greater control over perovskite films produced.

Experimental observation of flow fields around active Janus spheres.

The phoretic mechanisms at stake in the propulsion of asymmetric colloids have been the subject of debates during the past years. In particular, the importance of electrokinetic effects on the motility of Pt-PS Janus sphere was recently discussed. Here, we probe the hydrodynamic flow field around a catalytically active colloid using particle tracking velocimetry both in the freely swimming state and when kept stationary with an external force. Our measurements provide information about the fluid velocity in the vicinity of the surface of the colloid, and confirm a mechanism for propulsion that was proposed recently. In addition to offering a unified understanding of the nonequilibrium interfacial transport processes at stake, our results open the way to a thorough description of the hydrodynamic interactions between such active particles and understanding their collective dynamics.

Light-driven locomotion of a centimeter-sized object at the air-water interface: effect of fluid resistance.

A centimeter-sized flat-headed push pin with photothermal properties can be moved on a water surface by a simple near-infrared laser. Using light as an external stimulus allows for the remote control of the timing, direction and velocity of its locomotion. It has been clarified that the vertical orientation of the pin at the air-water interface affects the friction of locomotion, and therefore velocity and acceleration. The pin placed on a water surface with a pin point upward (a point protruding into air phase) moved an average distance of 5.3 ± 2.9 cm following one pulse of laser irradiation, and that placed with a pin point downward (a point protruding into water phase) moved 2.0 ± 1.4 cm. The velocity and acceleration were larger when the pin was placed on the water surface with a pin pointing upward, compared to when placed with the pin pointing downward. Numerical analysis conducted for the locomotions of the pin concluded that the differences in traveling distance, velocity and acceleration were due to the difference in fluid resistance of the pin point in air and water phases during their locomotion. This demonstration of remote control of the motion of small objects by light can open up a wide range of future transport applications.

Reactive Inkjet Printing and Propulsion Analysis of Silk-based Self-propelled Micro-stirrers.

In this study, a protocol for using reactive inkjet printing to fabricate enzymatically propelled silk swimmers with well-defined shapes is reported. The resulting devices are an example of self-propelled objects capable of generating motion without external actuation and have potential applications in medicine and environmental sciences for a variety of purposes ranging from micro-stirring, targeted therapeutic delivery, to water remediation (e.g., cleaning oil spills). This method employs reactive inkjet printing to generate well-defined small-scale solid silk structures by converting water soluble regenerated silk fibroin (silk I) to insoluble silk fibroin (silk II). These structures are also selectively doped in specific regions with the enzyme catalase in order to produce motion via bubble generation and detachment. The number of layers printed determines the three-dimensional (3D) structure of the device, and so here the effect of this parameter on the propulsive trajectories is reported. The results demonstrate the ability to tune the motion by varying the dimensions of the printed structures.

A Pickering Emulsion Route to Swimming Active Janus Colloids.

The field of active colloids is attracting significant interest to both enable applications and allow investigations of new collective colloidal phenomena. One convenient active colloidal system that has been much studied is spherical Janus particles, where a hemispherical coating of platinum decomposes hydrogen peroxide to produce rapid motion. However, at present producing these active colloids relies on a physical vapor deposition (PVD) process, which is difficult to scale and requires access to expensive equipment. In this work, it is demonstrated that Pickering emulsion masking combined with solution phase metallization can produce self-motile catalytic Janus particles. Comparison of the motion and catalytic activity with PVD colloids reveals a higher catalytic activity for a given thickness of platinum due to the particulate nature of the deposited coating. This Pickering emulsion based method will assist in producing active colloids for future applications and aid experimental research into a wide range of active colloid phenomena.

Elastic modulus measurements from individual lactose particles using atomic force microscopy.

The elastic modulus of pharmaceutical materials affects a number of pharmaceutical processes and subsequently formulation performance and is currently assessed by bulk methods, such as beam bending of compacts. Here we demonstrate the accurate measurement of the elastic modulus of alpha monohydrate lactose from the dominant (011) face of single crystals using atomic force microscopy (AFM) as 3.45+/-0.90GPa. The criteria to ensure this data is recorded within the elastic limit and can be modelled using Hertzian theory are established. We compare and contrast this AFM method to a permanent indentation technique based upon a much larger Berkovich pyramidal indenter on a lactose compact and the wider literature. Finally the AFM was utilized to study the elastic response of amorphous lactose, demonstrating that the physical state of the amorphous material changes under repeated loading and behaves in a more crystalline manner under repeated force measurements, suggesting a pressure induced phase transition. The AFM based approach demonstrated has the significant advantages of requiring minimal sample, no need for producing a compact, being non-destructive in that no permanent indent is required and providing a technique capable of detecting variations in material properties across a single particle or a number of particles.

Preparation and 3D Tracking of Catalytic Swimming Devices.

We report a method to prepare catalytically active Janus colloids that "swim" in fluids and describe how to determine their 3D motion using fluorescence microscopy. One commonly deployed method for catalytically active colloids to produce enhanced motion is via an asymmetrical distribution of catalyst. Here this is achieved by spin coating a dispersed layer of fluorescent polymeric colloids onto a flat planar substrate, and then using directional platinum vapor deposition to half coat the exposed colloid surface, making a two faced "Janus" structure. The Janus colloids are then re-suspended from the planar substrate into an aqueous solution containing hydrogen peroxide. Hydrogen peroxide serves as a fuel for the platinum catalyst, which is decomposed into water and oxygen, but only on one side of the colloid. The asymmetry results in gradients that produce enhanced motion, or "swimming". A fluorescence microscope, together with a video camera is used to record the motion of individual colloids. The center of the fluorescent emission is found using image analysis to provide an x and y coordinate for each frame of the video. While keeping the microscope focal position fixed, the fluorescence emission from the colloid produces a characteristic concentric ring pattern which is subject to image analysis to determine the particles relative z position. In this way 3D trajectories for the swimming colloid are obtained, allowing swimming velocity to be accurately measured, and physical phenomena such as gravitaxis, which may bias the colloids motion to be detected.