Hybrid Group IV Nanophotonic Structures Incorporating Diamond Silicon-Vacancy Color Centers.

We demonstrate a new approach for engineering group IV semiconductor-based quantum photonic structures containing negatively charged silicon-vacancy (SiV(-)) color centers in diamond as quantum emitters. Hybrid diamond-SiC structures are realized by combining the growth of nano- and microdiamonds on silicon carbide (3C or 4H polytype) substrates, with the subsequent use of these diamond crystals as a hard mask for pattern transfer. SiV(-) color centers are incorporated in diamond during its synthesis from molecular diamond seeds (diamondoids), with no need for ion-implantation or annealing. We show that the same growth technique can be used to grow a diamond layer controllably doped with SiV(-) on top of a high purity bulk diamond, in which we subsequently fabricate nanopillar arrays containing high quality SiV(-) centers. Scanning confocal photoluminescence measurements reveal optically active SiV(-) lines both at room temperature and low temperature (5 K) from all fabricated structures, and, in particular, very narrow line widths and small inhomogeneous broadening of SiV(-) lines from all-diamond nanopillar arrays, which is a critical requirement for quantum computation. At low temperatures (5 K) we observe in these structures the signature typical of SiV(-) centers in bulk diamond, consistent with a double lambda. These results indicate that high quality color centers can be incorporated into nanophotonic structures synthetically with properties equivalent to those in bulk diamond, thereby opening opportunities for applications in classical and quantum information processing.

The Argo: a high channel count recording system for neural recording in vivo.

OBJECTIVE: Decoding neural activity has been limited by the lack of tools available to record from large numbers of neurons across multiple cortical regions simultaneously with high temporal fidelity. To this end, we developed the Argo system to record cortical neural activity at high data rates. APPROACH: Here we demonstrate a massively parallel neural recording system based on platinum-iridium microwire electrode arrays bonded to a CMOS voltage amplifier array. The Argo system is the highest channel count in vivo neural recording system, supporting simultaneous recording from 65 536 channels, sampled at 32 kHz and 12-bit resolution. This system was designed for cortical recordings, compatible with both penetrating and surface microelectrodes. MAIN RESULTS: We validated this system through initial bench testing to determine specific gain and noise characteristics of bonded microwires, followed by in-vivo experiments in both rat and sheep cortex. We recorded spiking activity from 791 neurons in rats and surface local field potential activity from over 30 000 channels in sheep. SIGNIFICANCE: These are the largest channel count microwire-based recordings in both rat and sheep. While currently adapted for head-fixed recording, the microwire-CMOS architecture is well suited for clinical translation. Thus, this demonstration helps pave the way for a future high data rate intracortical implant.

Functionalisation of Detonation Nanodiamond for Monodispersed, Soluble DNA-Nanodiamond Conjugates Using Mixed Silane Bead-Assisted Sonication Disintegration.

Nanodiamonds have many attractive properties that make them suitable for a range of biological applications, but their practical use has been limited because nanodiamond conjugates tend to aggregate in solution during or after functionalisation. Here we demonstrate the production of DNA-detonation nanodiamond (DNA-DND) conjugates with high dispersion and solubility using an ultrasonic, mixed-silanization chemistry protocol based on the in situ Bead-Assisted Sonication Disintegration (BASD) silanization method. We use two silanes to achieve these properties: (1) 3-(trihydroxysilyl)propyl methylphosphonate (THPMP); a negatively charged silane that imparts high zeta potential and solubility in solution; and (2) (3-aminopropyl)triethoxysilane (APTES); a commonly used functional silane that contributes an amino group for subsequent bioconjugation. We target these amino groups for covalent conjugation to thiolated, single-stranded DNA oligomers using the heterobifunctional crosslinker sulfosuccinimidyl 4-(N-maleimidomethyl)cyclohexane-1-carboxylate (Sulfo-SMCC). The resulting DNA-DND conjugates are the smallest reported to date, as determined by Dynamic Light Scattering (DLS) and Atomic Force Microscopy (AFM). The functionalisation method we describe is versatile and can be used to produce a wide variety of soluble DND-biomolecule conjugates.

Surface functionalisation of nanodiamonds for human neural stem cell adhesion and proliferation.

Biological systems interact with nanostructured materials on a sub-cellular level. These interactions may govern cell behaviour and the precise control of a nanomaterial's structure and surface chemistry allow for a high degree of tunability to be achieved. Cells are surrounded by an extra-cellular matrix with nano-topographical properties. Diamond based materials, and specifically nanostructured diamond has attracted much attention due to its extreme electrical and mechanical properties, chemical inertness and biocompatibility. Here the interaction of nanodiamond monolayers with human Neural Stem Cells (hNSCs) has been investigated. The effect of altering surface functionalisation of nanodiamonds on hNSC adhesion and proliferation has shown that confluent cellular attachment occurs on oxygen terminated nanodiamonds (O-NDs), but not on hydrogen terminated nanodiamonds (H-NDs). Analysis of H and O-NDs by Atomic Force Microscopy, contact angle measurements and protein adsorption suggests that differences in topography, wettability, surface charge and protein adsorption of these surfaces may underlie the difference in cellular adhesion of hNSCs reported here.

Patterning of nanodiamond tracks and nanocrystalline diamond films using a micropipette for additive direct-write processing.

The ability to pattern the seeding of nanodiamonds (NDs), and thus selectively control areas of diamond growth, is a useful capability for many applications, including photonics, microelectromechanical systems (MEMS) prototyping, and biomaterial design. A microprinting technique using a computer-driven micropipette has been developed to deposit patterns of ND monolayers from an unreactive water/glycerol ND ink to 5-µm resolution. The concentration and composition of the ND solution were optimized to realize high-density monolayers of NDs and consistent ND printing. Subsequent nanocrystalline diamond (NCD) patterns grown using chemical vapor deposition showed a high level of compliance with the printed ND pattern. This "direct-write", bottom-up, and additive process offers a versatile and simple alternative to pattern diamond. The process has the particular advantage that it does not require lithography or destructive processing such as reactive-ion etching (RIE) and, pertinently, does not involve reactive chemicals that could alter the surface chemistry of NDs. Furthermore, given that this process obviates the use of conventional lithography, substrates that are not suitable for lithographic processing (e.g., excessively small or three-dimensional structured substrates) can be inscribed with ND patterns. The technique also allows for the growth of discrete, localized, single-crystal nanodiamonds with applications in quantum technology.

Biocompatibility of nanostructured boron doped diamond for the attachment and proliferation of human neural stem cells.

OBJECTIVE: We quantitatively investigate the biocompatibility of chemical vapour deposited (CVD) nanocrystalline diamond (NCD) after the inclusion of boron, with and without nanostructuring. The nanostructuring method involves a novel approach of growing NCD over carbon nanotubes (CNTs) that act as a 3D scaffold. This nanostructuring of BNCD leads to a material with increased capacitance, and this along with wide electrochemical window makes BNCD an ideal material for neural interface applications, and thus it is essential that their biocompatibility is investigated. APPROACH: Biocompatibility was assessed by observing the interaction of human neural stem cells (hNSCs) with a variety of NCD substrates including un-doped ones, and NCD doped with boron, which are both planar, and nanostructured. hNSCs were chosen due to their sensitivity, and various methods including cell population and confluency were used to quantify biocompatibility. MAIN RESULTS: Boron inclusion into NCD film was shown to have no observable effect on hNSC attachment, proliferation and viability. Furthermore, the biocompatibility of nanostructured boron-doped NCD is increased upon nanostructuring, potentially due to the increased surface area. SIGNIFICANCE: Diamond is an attractive material for supporting the attachment and development of cells as it can show exceptional biocompatibility. When boron is used as a dopant within diamond it becomes a p-type semiconductor, and at high concentrations the diamond becomes quasi-metallic, offering the prospect of a direct electrical device-cell interfacing system.

Boron-doped nanocrystalline diamond microelectrode arrays monitor cardiac action potentials.

The expansion of diamond-based electronics in the area of biological interfacing has not been as thoroughly explored as applications in electrochemical sensing. However, the biocompatibility of diamond, large safe electrochemical window, stability, and tunable electronic properties provide opportunities to develop new devices for interfacing with electrogenic cells. Here, the fabrication of microelectrode arrays (MEAs) with boron-doped nanocrystalline diamond (BNCD) electrodes and their interfacing with cardiomyocyte-like HL-1 cells to detect cardiac action potentials are presented. A nonreductive means of structuring doped and undoped diamond on the same substrate is shown. The resulting BNCD electrodes show high stability under mechanical stress generated by the cells. It is shown that by fabricating the entire surface of the MEA with NCD, in patterns of conductive doped, and isolating undoped regions, signal detection may be improved up to four-fold over BNCD electrodes passivated with traditional isolators.

Boron δ-doped (111) diamond solution gate field effect transistors.

A solution gate field effect transistor (SGFET) using an oxidised boron δ-doped channel on (111) diamond is presented for the first time. Employing an optimised plasma chemical vapour deposition (PECVD) recipe to deposit δ-layers, SGFETs show improved current-voltage (I-V) characteristics in comparison to previous similar devices fabricated on (100) and polycrystalline diamond, where the device is shown to operate in the enhancement mode of operation, achieving channel pinch-off and drain-source current saturation within the electrochemical window of diamond. A maximum gain and transconductance of 3 and 200µS/mm are extracted, showing comparable figures of merit to hydrogen-based SGFET. The oxidised device shows a site-binding model pH sensitivity of 36 mV/pH, displaying fast temporal responses. Considering the biocompatibility of diamond towards cells, the device's highly mutable transistor characteristics, pH sensitivity and stability against anodic oxidation common to hydrogen terminated diamond SGFET, oxidised boron δ-doped diamond SGFETs show promise for the recording of action potentials from electrogenic cells.

Aptamer-based biosensor for sensitive PDGF detection using diamond transistor.

The detection of platelet-derived growth factor (PDGF) via a solution-gate field-effect transistor (SGFET) has been demonstrated for the first time using aptamers immobilized on a diamond surface. Upon introduction of PDGF to the immobilized aptamer, a shift of 31.7 mV in the negative direction is observed at a source-drain current of -50 µA. A shift of 32.3 mV in the positive direction is detected after regeneration by SDS solution, indicating that the static measurement returns to its original value. These SGFETs operate stably within the large potential window of diamond (>3.0 V), and hence the surface channel does not need passivating with a thick insulating layer. Thereof, the immobilized aptamer channels have been exposed directly to the electrolyte solution without a gate insulator. Immobilization is achieved via aptamers covalently bonding to amine sites, thereby increasing the sensitivity of the biosensors. Diamond SGFETs have potential for the detection of PDGF and show durability against biological degradation after repeated usage and regeneration.

The use of nanodiamond monolayer coatings to promote the formation of functional neuronal networks.

Nanostructured materials provide a new dimension of interaction with biological systems that takes place on a sub-cellular level with a high degree of specificity. In the field of neuroscience the nanoscale corresponds to the size of synapses; the specific connections between brain cells. In this context, diamond-based materials have attracted much attention due to their extreme mechanical and electrical properties and their chemical inertness. Here the suitability of nanodiamond (ND) monolayers to act as a platform for neuronal growth is investigated. Neurons cultured on various ND-coated substrates perform remarkably well, and similar to those grown on standard protein-coated materials with respect to their initial cell attachment, sustained neurite outgrowth, cell-autonomous neuronal excitability and functionality of the resulting electrical networks. ND layering provides an excellent growth substrate on various materials for functional neuronal networks and bypasses the necessity of protein coating, which promises great potential for chronic medical implants.