Molecular cloning, heterologous expression, and in silico sequence analysis of Enterobacter GH19 class I chitinase (chiRAM gene).

BACKGROUND: Using in silico sequence analyses, the present study aims to clone and express the gene-encoding sequence of a GH19 chitinase from Enterobacter sp. in Escherichia coli. METHODS AND RESULTS: The putative open reading frame of a GH19 chitinase from Enterobacter sp. strain EGY1 was cloned and expressed into pGEM®-T and pET-28a (+) vectors, respectively using a degenerate primer. The isolated nucleotide sequence (1821 bp, GenBank accession no.: MK533791.2) was translated to a chiRAM protein (606 amino acids, UniProt accession no.: A0A4D6J2L9). The in silico protein sequence analysis of chiRAM revealed a class I GH19 chitinase: an N-terminus signal peptide (Met1-Ala23), a catalytic domain (Val83-Glu347 and the catalytic triad Glu149, Glu171, and Ser218), a proline-rich hinge region (Pro414 -Pro450), a polycystic kidney disease protein motif (Gly 465-Ser 533), a C-terminus chitin-binding domain (Ala553- Glu593), and conserved class I motifs (NYNY and AQETGG). A three-dimensional model was constructed by LOMETS MODELLER of PDB template: 2dkvA (class I chitinase of Oryza sativa L. japonica). Recombinant chiRAM was overexpressed as inclusion bodies (IBs) (~ 72 kDa; SDS-PAGE) in 1.0 mM IPTG induced E. coli BL21 (DE3) Rosetta strain at room temperature 18 h after induction. Optimized expression yielded active chiRAM with 1.974 ± 0.0002 U/mL, on shrimp colloidal chitin (SCC), in induced E. coli BL21 (DE3) Rosetta cells growing in SB medium. LC-MS/MS identified a band of 72 kDa in the soluble fraction with a 52.3% coverage sequence exclusive to the GH19 chitinase of Enterobacter cloacae (WP_063869339.1). CONCLUSIONS: Although chiRAM of Enterobacter sp. was successfully cloned and expressed in E. coli with appreciable chitinase activity, future studies should focus on minimizing IBs to facilitate chiRAM purification and characterization.

Molecular analysis of dilated and left ventricular noncompaction cardiomyopathies in Egyptian children.

BACKGROUND: Paediatric cardiomyopathy is a progressive, often lethal disorder and the most common cause of heart failure in children. Despite its severe outcomes, the genetic aetiology is still poorly characterised. High-throughput sequencing offers a great opportunity for a better understanding of the genetic causes of cardiomyopathy. AIM: The current study aimed to elucidate the genetic background of cardiomyopathy in Egyptian children. METHODS: This hospital-based study involved 68 patients; 58 idiopathic primary dilated cardiomyopathy and 10 left ventricular noncompaction cardiomyopathy. Cardiomyopathy-associated genes were investigated using targeted next-generation sequencing. RESULTS: Consanguinity was positive in 53 and 70% of dilated cardiomyopathy and left ventricular noncompaction cardiomyopathy patients, respectively. Positive family history of cardiomyopathy was present in 28% of dilated cardiomyopathy and 10% of the left ventricular noncompaction cardiomyopathy patients. In 25 patients, 29 rare variants were detected; 2 likely pathogenic variants in TNNI3 and TTN and 27 variants of uncertain significance explaining 2.9% of patients. CONCLUSIONS: The low genetic detection rate suggests that novel genes or variants might underlie paediatric cardiomyopathy in Egypt, especially with the high burden of consanguinity. Being the first national and regional report, our study could be a reference for future genetic testing in Egyptian cardiomyopathy children. Genome-wide tests (whole exome/genome sequencing) might be more suitable than the targeted sequencing to investigate the primary cardiomyopathy patients. Molecular characterisation of cardiomyopathies in different ethnicities will allow for global comparative studies that could result in understanding the pathophysiology and heterogeneity of cardiomyopathies.

Structure-Guided Engineering of a Family IV Cold-Adapted Esterase Expands Its Substrate Range.

Cold active esterases have gained great interest in several industries. The recently determined structure of a family IV cold active esterase (EstN7) from Bacillus cohnii strain N1 was used to expand its substrate range and to probe its commercially valuable substrates. Database mining suggested that triacetin was a potential commercially valuable substrate for EstN7, which was subsequently proved experimentally with the final product being a single isomeric product, 1,2-glyceryl diacetate. Enzyme kinetics revealed that EstN7's activity is restricted to C2 and C4 substrates due to a plug at the end of the acyl binding pocket that blocks access to a buried water-filled cavity. Residues M187, N211 and W206 were identified as key plug forming residues. N211A stabilised EstN7 allowing incorporation of the destabilising M187A mutation. The M187A-N211A double mutant had the broadest substrate range, capable of hydrolysing a C8 substrate. W206A did not appear to have any significant effect on substrate range either alone or when combined with the double mutant. Thus, the enzyme kinetics and engineering together with a recently determined structure of EstN7 provide new insights into substrate specificity and the role of acyl binding pocket plug residues in determining family IV esterase stability and substrate range.

Molecular study on recombinant cold-adapted, detergent- and alkali stable esterase (EstRag) from Lysinibacillus sp.: a member of family VI.

Cold-adapted esterases have potential industrial applications. To fulfil the global continuous demand for these enzymes, a cold-adapted esterase member of family VI from Lysinibacillus sp. YS11 was cloned on pET-28b (+) vector and expressed in E. coli BL21(DE3) Rosetta cells for the first time. The open reading frame (654 bp: GenBank MT120818.1) encodes a polypeptide (designated EstRag: 217 amino acid residues). EstRag amino acid sequence has conserved esterase signature motifs: pentapeptide (GFSQG) and catalytic triad Ser110-Asp163-His194. EstRag 3D predicted model, built with LOMETS3 program, showed closest structural similarity to PDB 1AUO_A (esterase: Pseudomonas fluorescens); TM-align score program inferences. Purified EstRag to 9.28-fold, using Ni2+affinity agarose matrix, showed a single protein band (25 kDa) on SDS-PAGE, Km (0.031 mM) and Kcat/Km (657.7 s-1 mM-1) on p-NP-C2. Temperature and pH optima of EstRag were 35 °C and 8.0, respectively. EstRag was fully stable at 5-30 °C for 120 min and at pH(s) 8.0-10.0 after 24 h. EstRag activity (391.46 ± 0.009%) was impressively enhanced after 30 min preincubation with 5 mM Cu2+. EstRag retained full stability after 30 min pre-incubation with 0.1%(v/v) SDS, Triton X-100, and Tween-80. EstRag promising characteristics motivate performing guided evolution and industrial applications prospective studies.

"Recombinant cold -adapted halotolerant, organic solvent-stable esterase (estHIJ) from Bacillus halodurans.

Esterases and lipases enduring harsh conditions, including low temperature and extreme tolerance to organic solvents, have attracted great attention in recent times. In the current study, a full open reading frame of 747 bp that encodes a novel, cold-adapted esterase (estHIJ) of 248 amino acids from Bacillus halodurans strain NAH-Egypt was heterologously cloned and expressed in E. coli BL21 (DE3) Rosetta. Amino acid sequence analysis revealed that estHIJ belongs to family XIII of lipolytic enzymes, with a characteristic pentapeptide motif (G-L-S-L-G). The recombinant estHIJ was purified using Ni-affinity chromatography to homogeneity with purification fold, yield, specific activity, and molecular weight (MW) of 3.5, 47.5%, 19.8 U/mg and 29 kDa, respectively. The enzyme showed preferential substrate specificity towards pNP-acetate (C2), with catalytic efficiency of 46,825 min-1 mM-1 estHIJ displayed optimal activity at 30 °C and pH (7.0-8.0). estHIJ demonstrated robust stability in the presence of 50% (v/v) non-polar solvents and 4 M NaCl after 15 h and 6 h of incubation, respectively. The promising features of the recombinant estHIJ underpin its potential in several fields, e.g., the synthesis of pharmaceutical compounds and the food industry.

Overexpression, purification and enzymatic characterization of a recombinant Arabian camel Camelus dromedarius glucose-6-phosphate dehydrogenase.

In a previous study the full-length open reading frame of the Arabian camel, Camelus dromedarius liver cytosolic glucose-6-phosphate dehydrogenase (G6PD) cDNA was determined using reverse transcription polymerase chain reaction. The C. dromedarius cDNA was found to be 1545 nucleotides (accession number JN098421) that encodes a protein of 515 amino acids residues. In the present study, C. dromedarius recombinant G6PD was heterologously overexpressed in Escherichia coli BL21 (DE3) pLysS and purified by immobilized metal affinity fast protein liquid chromatography (FPLC) in a single step. The purity and molecular weight of the enzyme were analyzed on SDS-PAGE and the purified enzyme showed a single band on the gel with a molecular weight of 63.0 KDa. The specific activity was determined to be 2000 EU/mg protein. The optimum temperature and pH were found to be 60 °C and 7.4, respectively. The isoelectric point (pI) for the purified G6PD was determined to be 6.4. The apparent Km values for the two substrates NADP+ and G6P were found to be 23.2 µM and 66.7 µM, respectively. The far-UV circular dichroism (CD) spectra of G6PD showed that it has two minima at 208 and 222 nm as well as maxima at 193 nm which is characteristic of high content of α-helix. Moreover, the far-UV CD spectra of the G6PD in the presence or absence of NADP+ were nearly identical.

Statistically optimized ceftriaxone sodium biotransformation through Achromobacter xylosoxidans strain Cef6: an unusual insight for bioremediation.

The present study underlines a unique promising approach toward efficient biotransformation of ceftriaxone sodium (Ceftx), a highly frequent prescribed cephalosporin antibiotic, by a newly bacterium namely Achromobacter xylosoxidans strain Cef6 isolated from Ceftx contaminated raw materials in pharmaceutical industries. A three step sequential statistical-mathematical approach (Plackett-Burman design [PBD], Central Composite Design [CCD], and ridge-canonical analyses) was anticipated to optimize the biotransformation process. Ceftx concentration and medium volume: bottle volume ratio, two key determinants, significantly (p < 0.05) affected the process outcome deduced by regression analysis of PBD' data. CCD and ridge-canonical analyses localized the optimal levels of Ceftx concentration and medium volume: 250 ml bottle volume ratio to be 0.39 and 7.973 g Ceftx/L modified tryptic soy broth achieving Ceftx biotransformation (100%) after 39 h under aerobic static conditions at 30 °C, irrespectively deduced via HPLC analysis. Impressively, only one of five Ceftx byproducts was detected by the end of the biotransformation process. To the best of authors' knowledge, this is the first report addressing a detailed study regarding efficient biotransformation of Ceftx by single bacterium not bacterial consortium under aerobic conditions. Present data would greatly encourage applying this approach for decontamination of some Ceftx contaminated environmental sites.

The novel oleaginous bacterium Sphingomonas sp. EGY1 DSM 29616: a value added platform for renewable biodiesel.

Oleaginous microorganisms are regarded as efficient, renewable cell factories for lipid biosynthesis, a biodiesel precursor, to overwhelm the cosmopolitan energy crisis with affordable investment capital costs. Present research highlights production and characterization of lipids by a newly isolated oleaginous bacterium, Sphingomonas sp. EGY1 DSM 29616 through an eco-friendly approach. Only sweet whey [42.1% (v/v)] in tap water was efficiently used as a growth medium and lipid production medium to encourage cell growth and trigger lipid accumulation simultaneously. Cultivation of Sphingomonas sp. EGY1 DSM 29616 in shake flasks resulted in the accumulation of 8.5 g L-1 lipids inside the cells after 36 h at 30 °C. Triglycerides of C16:C18 saturated and unsaturated fatty acids showed a similar pattern to tripalmitin or triolein; deduced from gas chromatography (GC), thin layer chromatography (TLC), and Matrix-assisted laser desorption/ionization time-of-flight-mass spectra analysis (MALDI-TOF-MS) analyses. Batch cultivation 2.5 L in a laboratory scale fermenter led to 13.8 g L-1 accumulated lipids after 34 h at 30 °C. Present data would underpin the potential of Sphingomonas sp. EGY1 DSM 29616 as a novel renewable cell factory for biosynthesis of biodiesel.

SHG10 keratinolytic alkaline protease from Bacillus licheniformis SHG10 DSM 28096: Robust stability and unusual non-cumbersome purification.

Present study underlines an unusual non-cumbersome-powerful strategy for purification of SHG10 keratinolytic alkaline protease from Bacillus licheniformis SHG10 DSM 28096 with robust stability properties. The enzyme was impressively purified to homogeneity with specific activity, purification fold, and yield of 613.82 U mg-1 , 58.91 and 99%, respectively, via a sequential two-step purification strategy: precipitation with 65% (NH4 )2 SO4 and flow through fractions of DEAE-cellulose DE 53 column. SDS-PAGE conferred a monomeric enzyme with a molecular mass of 30.4 kDa. The enzyme demonstrated optimal activity at pH (10.0-11.0) and at 65 °C. It exhibited full stability at pH (6.0-11.0) over 38 h at 4 °C and at 65 °C for 15 min. Remarkable enhanced enzyme activity (130.15 and 126.37%) was retained in presence of commercial laundry detergents Oxi and Ariel after 1 h, respectively. Organic solvent stability of the enzyme was verified in butanol, ether, acetonitrile, isopropanol, and chloroform. Imposingly, full storage stability (100%) of the enzyme along 1 year in -20 °C was confirmed. Km -Vmax was 0.00174 mM-534.2 mM Sub · min-1 · mg protein-1 and 1.266 mg-28.89 mg Sub · h-1 · mg protein-1 on N-Suc-Ala-Ala-Pro-Phe-pNA and keratin azure, respectively. Robust stability properties of SHG10 keratinolytic alkaline protease along with rapid-efficient purification underpin its potential commercialization for industrial exploitation.

A sequential statistical approach towards an optimized production of a broad spectrum bacteriocin substance from a soil bacterium Bacillus sp. YAS 1 strain.

Bacteriocins, ribosomally synthesized antimicrobial peptides, display potential applications in agriculture, medicine, and industry. The present study highlights integral statistical optimization and partial characterization of a bacteriocin substance from a soil bacterium taxonomically affiliated as Bacillus sp. YAS 1 after biochemical and molecular identifications. A sequential statistical approach (Plackett-Burman and Box-Behnken) was employed to optimize bacteriocin (BAC YAS 1) production. Using optimal levels of three key determinants (yeast extract (0.48% (w/v), incubation time (62 hrs), and agitation speed (207 rpm)) in peptone yeast beef based production medium resulted in 1.6-fold enhancement in BAC YAS 1 level (470 AU/mL arbitrary units against Erwinia amylovora). BAC YAS 1 showed activity over a wide range of pH (1-13) and temperature (45-80 °C). A wide spectrum antimicrobial activity of BAC YAS 1 against the human pathogens (Clostridium perfringens, Staphylococcus epidermidis, Campylobacter jejuni, Enterobacter aerogenes, Enterococcus sp., Proteus sp., Klebsiella sp., and Salmonella typhimurium), the plant pathogen (E. amylovora), and the food spoiler (Listeria innocua) was demonstrated. On top and above, BAC YAS 1 showed no antimicrobial activity towards lactic acid bacteria (Lactobacillus bulgaricus, L. casei, L. lactis, and L. reuteri). Promising characteristics of BAC YAS 1 prompt its commercialization for efficient utilization in several industries.

Lactoferrin/pectin nanocomplex encapsulating ciprofloxacin and naringin as a lung targeting antibacterial nanoplatform with oxidative stress alleviating effect.

Pseudomonas aeruginosa is an opportunistic Gram-negative bacterium with adaptive metabolic abilities. It can cause hospital-acquired infections with significant mortality rates, particularly in people with already existing medical conditions. Its ability to develop resistance to common antibiotics makes managing this type of infections very challenging. Furthermore, oxidative stress is a common consequence of bacterial infection and antibiotic therapy, due to formation of reactive oxygen species (ROS) during their mode of action. In this study we aimed to alleviate oxidative stress and enhance the antibacterial efficacy of ciprofloxacin (CPR) antibiotic by its co-encapsulation with naringin (NAR) within a polyelectrolyte complex (PEX). The PEX comprised of polycationic lactoferrin (LF) and polyanionic pectin (PEC). CPR/NAR-loaded PEX exhibited spherical shape with particle size of 237 ± 3.5 nm, negatively charged zeta potential (-23 ± 2.2 mV) and EE% of 61.2 ± 4.9 for CPR and 76.2 ± 3.4 % for NAR. The LF/PEC complex showed prolonged sequential release profile of CPR to limit bacterial expansion, followed by slow liberation of NAR, which mitigates excess ROS produced by CPR's mechanism of action without affecting its efficacy. Interestingly, this PEX demonstrated good hemocompatibility with no significant in vivo toxicity regarding hepatic and renal functions. In addition, infected mice administrated this nanoplatform intravenously exhibited significant CFU reduction in the lungs and kidneys, along with reduced immunoreactivity against myeloperoxidase. Moreover, this PEX was found to reduce the lungs´ oxidative stress via increasing both glutathione (GSH) and catalase (CAT) levels while lowering malondialdehyde (MDA). In conclusion, CPR/NAR-loaded PEX can offer a promising targeted lung delivery strategy while enhancing the therapeutic outcomes of CPR with reduced oxidative stress.

A molecular study on recombinant pullulanase type I from Metabacillus indicus.

Despite the great potential of cold-adapted pullulanase type I in tremendous industrial applications, the majority of commercialized pullulnases type I are of mesophilic and thermophilic origin so far. Hence, the present study underlines cloning, heterologous expression in Escherichia coli, characterization, and in silico structural modeling of Metabacillus indicus open reading frame of cold-adapted pullulanase type I (Pull_Met: 2133 bp & 710 a.a) for the first time ever. The predicted Pull_Met tertiary structure by I-TASSER, was structurally similar to PDB 2E9B pullulanase of Bacillus subtilis. Purified to homogeneity Pull_Met showed specific activity (667.6 U/mg), fold purification (31.7), molecular mass (79.1 kDa), monomeric subunit and Km (2.63 mg/mL) on pullulan. Pull_Met had optimal pH (6.0) and temperature (40 oC). After 10 h pre-incubation at pH 2.6-6.0, Pull_Met maintained 47.12 ± 0.0-35.28 ± 1.64% of its activity. After 120 min pre-incubation at 30 oC, the retained activity was 51.11 ± 0.29%. At 10 mM Mn2+, Na2+, Ca2+, Mg2+, and Cu2+ after 30 min preincubation, retained activity was 155.89 ± 8.97, 134.71 ± 1.82, 97.64 ± 7.06, 92.25 ± 4.18, and 71.28 ± 1.10%, respectively. After 30 min pre-incubation with Tween-80, Tween-20, Triton X-100, and commercially laundry detergents at 0.1% (v/v), the retained activity was 141.15 ± 3.50, 145.45 ± 0.20, 118.12 ± 11.00, and 90%, respectively. Maltotriose was the only end product of pullulan hydrolysis. Synergistic action of CA-AM21 (α-amylase) and Pull_Met on starch liberated 16.51 g reducing sugars /g starch after 1 h at 40 oC. Present data (cold-adeptness, detergent stability, and ability to exhibit starch saccharification of Pull_Met) underpins it as a promising pullulanase type I for industrial exploitation.

Microbiome diversity in African American, European American, and Egyptian colorectal cancer patients.

Purpose: Although there is an established role for microbiome dysbiosis in the pathobiology of colorectal cancer (CRC), CRC patients of various race/ethnicities demonstrate distinct clinical behaviors. Thus, we investigated microbiome dysbiosis in Egyptian, African American (AA), and European American (EA) CRC patients. Patients and methods: CRCs and their corresponding normal tissues from Egyptian (n = 17) patients of the Alexandria University Hospital, Egypt, and tissues from AA (n = 18) and EA (n = 19) patients at the University of Alabama at Birmingham were collected. DNA was isolated from frozen tissues, and the microbiome composition was analyzed by 16S rRNA sequencing. Differential microbial abundance, diversity, and metabolic pathways were identified using linear discriminant analysis (LDA) effect size analyses. Additionally, we compared these profiles with our previously published microbiome data derived from Kenyan CRC patients. Results: Differential microbiome analysis of CRCs across all racial/ethnic groups showed dysbiosis. There were high abundances of Herbaspirillum and Staphylococcus in CRCs of Egyptians, Leptotrichia in CRCs of AAs, Flexspiria and Streptococcus in CRCs of EAs, and Akkermansia muciniphila and Prevotella nigrescens in CRCs of Kenyans (LDA score >4, adj. p-value <0.05). Functional analyses showed distinct microbial metabolic pathways in CRCs compared to normal tissues within the racial/ethnic groups. Egyptian CRCs, compared to normal tissues, showed lower l-methionine biosynthesis and higher galactose degradation pathways. Conclusions: Our findings showed altered mucosa-associated microbiome profiles of CRCs and their metabolic pathways across racial/ethnic groups. These findings provide a basis for future studies to link racial/ethnic microbiome differences with distinct clinical behaviors in CRC.

Recombinant acetylxylan esterase of Halalkalibacterium halodurans NAH-Egypt: molecular and biochemical study.

Acetylxylan esterase plays a crucial role in xylan hydrolysis as the acetyl side-groups restrict endoxylanase action by stearic hindrance. In this study, an acetylxylan esterase (AXE-HAS10: 960 bp & 319 a.a) putative ORF from Halalkalibacterium halodurans NAH-Egypt was extensively studied through heterologous overexpression in Escherichia coli, biochemical characterization, and structural modeling. The AXE-HAS10 tertiary structure was predicted by the Local Meta Threading Server. AXE-HAS10 belongs to the carbohydrate esterase Family 7. Purified to homogeneity AXE-HAS10 showed specific activity (36.99 U/mg), fold purification (11.42), and molecular mass (41.39 kDa). AXE-HAS10 showed optimal pH (8.5) and temperature (40 oC). After 15 h of incubation at pH 7.0-9.0, AXE-HAS10 maintained 100% activity. After 120 min at 35 and 40 oC, the retained activity was 80 and 50%, respectively. At 10 mM Mn2+, Fe3+, K+, and Ca2+ after 30 min, retained activity was 329 ± 15, 212 ± 5.2, 123 ± 1.4, and 120 ± 3.0%, respectively. After 30 min of preincubation with triton x-100, SDS, and CTAB at 0.1% (v/v), the retained activity was 150 ± 19, 88 ± 4, and 82 ± 7%, respectively. At 6.0 M NaCl after 30 min, retained activity was 58%. A 1.44-fold enhancement of beechwood xylan hydrolysis was achieved by AXE-HAS10 and Penicillium chrysogenum DSM105774 ß-xylanase concurrently. Present data underpins AXE-HAS10 as a promising AXE for industrial exploitation.

Key determinants affecting sheep wool biodegradation directed by a keratinase-producing Bacillus subtilis recombinant strain.

OVAT (one variable at a time) approach was applied in this study to screen the most important physicochemical key determinants involved in the process of sheep wool biodegradation. The process was directed by a keratinase-producing Bacillus subtilis DB 100 (p5.2) recombinant strain. Data indicate that, sheep wool could be degraded efficiently in cultures incubated at 30°C, with initial pH of 7 with agitation at 150 rpm. Two times autoclaved alkali treated and undefatted chopped sheep wool is more accessible to biodegradation. B. subtilis recombinant cells could utilize sheep wool as a sole source of carbon and nitrogen. Sheep wool-based modified basal medium II, lacking NH4Cl and yeast extract, could greatly support the growth of these bacterial cells. Sheep wool biodegradation was conducted efficiently in the absence of kanamycin consequently; high stability of the recombinant plasmid (p5.2) represents a great challenge upon scaling up this process. Three key determinants (sheep wool concentration, incubation time and inoculum size) imposing considerable constraints on the process are highlighted. Sheep wool-based tap water medium and sheep wool-based distilled water medium were formulated in this study. High levels of released end products, produced from sheep wool biodegradation are achieved upon using these two sheep wool-based water media. Data indicate that, sheep wool hydrolysate is rich in some amino acids, such as tyrosine, phenylalanine, lysine, proline, isoleucine, leucine, valine, aspartic acid and glutamic acid. Moreover, the resulting sheep wool hydrolysate contains soluble proteins of high and intermediate molecular weights. The present study demonstrates a feasible, cheap, reproducible, efficient and rapid biotechnological approach towards utilization of raw sheep wool waste through a recombinant bacterium.

Cloning, expression, and in silico structural modeling of cholesterol oxidase of Acinetobacter sp. strain RAMD in E. coli.

Cholesterol oxidases (CHOXs) are flavin-adenine dinucleotide-dependent oxidoreductases with a range of biotechnological applications. There remains an urgent need to identify novel CHOX family members to meet the demands of enzyme markets worldwide. Here, we report the cloning, heterologous expression, and structural modeling of the cholesterol oxidase of Acinetobacter sp. strain RAMD. The cholesterol oxidase gene was cloned and expressed in pGEM®-T and pET-28a(+) vectors, respectively, using a gene-specific primer based on the putative cholesterol oxidase ORF of Acinetobacter baumannii strain AB030 (GenBank [gb] locus tag: IX87_05230). The obtained nucleotide sequence (1671 bp, gb: MK575469.2), translated to a protein designated choxAB (556 amino acids), was overexpressed as inclusion bodies (IBs) (MW ˜ 62 kDa) in 1 mm IPTG-induced Escherichia coli BL21 (DE3) Rosetta cells. The optimized expression conditions (1 mm IPTG with 2% [v/v] glycerol and at room temperature) yielded soluble active choxAB of 0.45 U·mL-1 , with 56.25-fold enhancement. The recombinant choxAB was purified to homogeneity using Ni2+ -affinity agarose column with specific activity (0.054 U·mg-1 ), yield (8.1%), and fold purification (11.69). Capillary isoelectric-focusing indicated pI of 8.77 for choxAB. LC-MS/MS confirmed the IBs (62 kDa), with 82.6% of the covered sequence being exclusive to A. baumannii cholesterol oxidase (UniProtKB: A0A0E1FG24). The 3D structure of choxAB was predicted using the LOMETS webtool with the cholesterol oxidase template of Streptomyces sp. SA-COO (PDB: 2GEW). The predicted secondary structure included 18 α-helices and 12 ß-strands, a predicted catalytic triad (E220 , H380 , and N514 ), and a conserved FAD-binding sequence (GSGFGGSVSACRLTEKG). Future studies should consider fusion to solubilization tags and switching to the expression host Pichia pastoris to reduce IB formation.

Use of Wheat Straw for Value-Added Product Xylanase by Penicillium chrysogenum Strain A3 DSM105774.

The present work highlights the valorization of the bulky recalcitrant lignocellulose byproduct wheat straw (WS) for the enhanced production of value-added xylanase by the locally sourced novel Penicillium chrysogenum strain A3 DSM105774 for the first time. The optimized production of xylanase by submerged state of fermentation of WS was achieved using a three-step statistical and sequential approach: one factor at a time (OFAT), Plackett-Burman design (PBD), and Box Behnken design (BBD). Incubation temperature (30 °C), WS, and ammonium sulphate were the key determinants prompting xylanase production; inferred from OFAT. The WS concentration (%(w/v)), yeast extract concentration (%(w/v)), and initial pH of the production medium imposed significant effects (p ≤ 0.05) on the produced xylanase, realized from PBD. The predicted levels of WS concentration, initial pH of the production medium, and yeast extract concentration provoking the ultimate xylanase levels (53.7 U/mL) with an 8.95-fold enhancement, localized by the estimated ridge of the steepest ascent of the ridge analysis path, were 3.8% (w/v), 5.1, and 0.098% (w/v), respectively; 94.7% lab validation. The current data underpin the up-scaling of xylanase production using this eco-friendly, cheap, and robust methodology for the valorization of WS into the value-added product xylanase.

Structure and in silico simulations of a cold-active esterase reveals its prime cold-adaptation mechanism.

Here we determined the structure of a cold active family IV esterase (EstN7) cloned from Bacillus cohnii strain N1. EstN7 is a dimer with a classical α/ß hydrolase fold. It has an acidic surface that is thought to play a role in cold-adaption by retaining solvation under changed water solvent entropy at lower temperatures. The conformation of the functionally important cap region is significantly different to EstN7's closest relatives, forming a bridge-like structure with reduced helical content providing greater access to the active site through more than one substrate access tunnel. However, dynamics do not appear to play a major role in cold adaption. Molecular dynamics at different temperatures, rigidity analysis, normal mode analysis and geometric simulations of motion confirm the flexibility of the cap region but suggest that the rest of the protein is largely rigid. Rigidity analysis indicates the distribution of hydrophobic tethers is appropriate to colder conditions, where the hydrophobic effect is weaker than in mesophilic conditions due to reduced water entropy. Thus, it is likely that increased substrate accessibility and tolerance to changes in water entropy are important for of EstN7's cold adaptation rather than changes in dynamics.

Optimizing the biodegradation of two keratinous wastes through a Bacillus subtilis recombinant strain using a response surface methodology.

Statistical optimization of the biodegradation of two keratinous wastes directed by Bacillus subtilis recombinant cells was carried out by means of a response surface methodology. A Box-Behnken design was employed to predict the optimal levels of three variables namely, keratin percent, incubation time and inoculum size. Analysis of variance revealed that, only keratin percent had the highest significant effect. Canonical analysis and ridge max analysis were used to get the optimal levels of the three predictors along with the optimum levels of the responses. The optimal sets of predicted and validated levels of the three variables were [7.69% (w/v) feathers, 96.58 h and 1.28% (v/v) inoculum size] and [8% (w/v) feathers, 98.45 h, 3.9% (v/v) inoculum size] to achieve the highest levels of soluble proteins (1.25-1.7 mg/ml) and NH(2)-free amino groups (245.82-270.0 µmol leucine/ml), respectively upon using three optimized feathers-based media. These values represented 83.67-100% and 100% adequacy for the models of soluble proteins and NH(2)-free amino groups, respectively. While, [8.23% (w/v) sheep wool, 5.52% (v/v) inoculum size and 46.58 h] and [8.33% (w/v) sheep wool, 5.89% (v/v) inoculum size and 63.46 h] were the optimal sets of predicted and validated levels of the above variables to achieve the highest yields of soluble proteins (3.4-4.6 mg/ml) and NH(2)-free amino groups (290.9-302.0 µmol leucine/ml), respectively upon using three optimized sheep wool-based media. These values represented 100% adequacy for the models of soluble proteins and NH(2)-free amino groups. By the end of the optimization strategy, a fold enhancement (2.14-2.43 and 1.78-2.12) in the levels of released soluble proteins and NH(2)-free amino groups, respectively was obtained upon using three optimized feathers-based media. However, a fold enhancement (4.25-5.75 and 2.42-2.5) in the levels of soluble proteins and NH(2)-free amino groups, respectively was obtained upon using three optimized sheep wool-based media. Data would encourage pilot scale optimization of the biodegradation of these wastes.

Antibacterial activity of Centaurea pumilio L. root and aerial part extracts against some multidrug resistant bacteria.

BACKGROUND: In the context of searching for potent, safe, natural antimicrobial agents to combate the global antimicrobial resistance (AMR) phenomenon, the current study evaluates for the first time ever, the broad-spectrum antimicrobial activity of essential oil (EO) and extracts from the rare wild plant Centaurea pumilio L.. It has tremendous ethnomedicinal values; its dried root is used as a fattening agent, a treatment for bad breath and diabetes, and screened for schistosomicidal activity. METHODS: C. pumilio EO was extracted by hydrodistillation using a Clevenger apparatus. Chemical constituents of aerial part were extracted using a sequential solvent/solvent procedure employing four solvents with increasing polarities in the following order: petroleum ether, chloroform, ethyl acetate, and n-butanol. The chemical constituents were identified by GC-MS. Fifty-two microbial strains were used; twenty-six multidrug resistant (MDR), sixteen clinical, and ten reference strains. The identification of the microbial strains was performed by MALDI-TOF-MS. The antimicrobial activity of the EO and the aerial part and the root extracts was assessed through disc diffusion assay. A minimum inhibitory concentration (MIC) of the EO and extracts was determined using the broth micro-dilution method. RESULTS: The growth of reference and clinical strains was inhibited by EO, methanol, chloroform, and ethyl acetate aerial part extracts and chloroform root extract. The MDR strains growth, however, was inhibited only by EO and chloroform aerial part extract. GC-MS identified for the first time eighteen constituents from aerial part EO and chloroform extract each. EO showed antimicrobial activity against the reference, clinical, and MDR strains with MIC values of 31.25-125, 31.25-125, and 62.50-250 µg/mL, respectively. Methanol aerial part extract exhibited high antimicrobial activities with MIC values of 62.50-250 µg/mL against reference and clinical strains. Chloroform root extract displayed strong antimicrobial activity against reference and clinical strains recording MIC values of 62.50-250 µg/mL and 62.50-125 µg/mL, respectively. The chloroform aerial part extract demonstrated potent antimicrobial activity against the reference, clinical, and MDR strains with 31.25, 31.25, and 15.62 µg/mL MIC values, respectively. CONCLUSIONS: Present data unravel the C. pumilio pharmacological magnitude to discover eco-friendly potent antimicrobial agents to fight AMR phenomenon.