Novel robotic technology for the rapid intraoperative manufacture of patient-specific instrumentation allowing for improved glenoid component accuracy in shoulder arthroplasty: a cadaveric study.

BACKGROUND: Accurate prosthesis placement in arthroplasty is an important factor in the long-term success of these interventions. Many types of guidance technology have been described to date often suffering from high costs, complex theater integration, time inefficiency, and problems with day-to-day usability. We present a novel, intraoperative robotics platform, capable of rapid, real-time manufacture of low-cost patient-specific guides while overcoming many of the issues with existing approaches. METHODS: A prototype robotics platform was assessed in a 24-specimen cadaveric trial during sequential simulated shoulder arthroplasty procedures. The platform consisted of a tableside robot with sterile drapes and sterile disposable components. The robot itself comprised a 3D optical scanner, a 3-axis sterile robotic drill, and a 2-axis receptacle into which the disposable consumables were inserted. The consumable was composed of a region of rapidly setting moldable material and a clip allowing it to be reversibly attached to the robot. Computed tomographic (CT) imaging was obtained for all cadaveric specimens, and a surgical plan was created focusing on glenoid component position-specifically, guidewire position to allow for accurate glenoid preparation before implant insertion. Intraoperatively, for every specimen, the relevant osseous anatomy was exposed and humeral and glenoid preparation undertaken in the usual manner. The sterile disposable was used to create a mold of the joint surface. Once set, the mold was inserted into the robot and an optical scan of the surface was undertaken followed by automatic surface registration with the CT data and surgical plan. An automatic guide hole was subsequently drilled into the molded blank, which was removed from the robot and placed back into the patient, with the melded surface ensuring exact replacement. The guidewire was then driven through the guide hole in accordance with the preoperative plan. RESULTS: The novel robotic platform achieved average angular accuracies of 1.9° (standard deviation [SD] 1.3) version and 1.2° (SD 0.7) inclination with positional accuracy of 1.1 mm (SD 0.7) compared to a preoperative plan. DISCUSSION: We have described a novel robotics platform that is able to reliably produce patient-specific intraoperative guides to allow for accurate guidewire placement. Guidance is provided using a portable intraoperative device. The results suggest achieved accuracy levels may be equivalent to those seen in other existing guidance technologies; however, eventual in vivo trials and analysis is required. This technology has potential transferability to improve accuracy in other areas of arthroplasty.

CT-based micromotion analysis method can assess early implant migration and development of radiolucent lines in cemented glenoid components: a clinical feasibility study.

BACKGROUND AND PURPOSE: CT micromotion analysis (CTMA) has been considered as an alternative to radiostereometry (RSA) for assessing early implant migration of orthopedic implants. We investigated the feasibility of CTMA to assess early migration and the progression of radiolucent lines in shoulder arthroplasties over 24 months using sequential low-dose CT scans. PATIENTS AND METHODS: 7 patients were included and underwent 9 primary total shoulder arthroplasties. We made CT scans preoperatively, within 1 week postoperatively, and after 3, 6, 12, and 24 months. At each follow-up, postoperative glenoid migration and any development of radiolucent lines were assessed. Clinical outcomes were recorded at all time points except within 1 week postoperatively. RESULTS: For the glenoid component, the median translation and median rotation were 0.00-0.10 mm and -1.53° to 1.05° at 24 months. Radiolucent lines could be observed around all glenoid components. The radiolucent lines developed from the periphery to the center of the implant for 6 glenoid components during follow-up. The Constant Score improved from a mean of 30 (21-51) preoperatively to 69 (41-88) at 24 months. INTERPRETATION: CTMA can be used to identify early migration and the development of radiolucent lines over time in glenoid components. Clinical trials with a larger sample size and longer follow-up are needed to establish the relationship between migration, radiolucent lines, loosening, and clinical outcome.

Precision of CT-based micromotion analysis is comparable to radiostereometry for early migration measurements in cemented acetabular cups.

Background and purpose - CT (computed tomography) based methods have lately been considered an alternative to radiostereometry (RSA) for assessing early implant migration. However, no study has directly compared the 2 methods in a clinical setting. We estimated the precision and effective radiation dose of a CT-based method and compared it with marker-based RSA in 10 patients with hip arthroplasty.Patients and methods - We included 10 patients who underwent total hip replacement with a cemented cup. CT and RSA double examinations were performed postoperatively, and precision and effective dose data were compared. The CT data was analyzed with CT micromotion analysis (CTMA) software both with and without the use of bone markers. The RSA images were analyzed with RSA software with the use of bone markers.Results - The precision of CTMA with bone markers was 0.10-0.16 mm in translation and 0.31°-0.37° in rotation. Without bone markers, the precision of CTMA was 0.10-0.16 mm in translation and 0.21°-0.31° in rotation. In comparison, the precision of RSA was 0.09-0.26 mm and 0.43°-1.69°. The mean CTMA and RSA effective dose was estimated at 0.2 mSv and 0.04 mSv, respectively.Interpretation - CTMA, with and without the use of bone markers, had a comparable precision to RSA. CT radiation doses were slightly higher than RSA doses but still at a considerably low effective dose.

Accuracy and precision of a CT method for assessing migration in shoulder arthroplasty: an experimental study.

BACKGROUND: Radiostereometric analysis (RSA) is the gold standard to measure early implant migration which is a predictive factor for implant survival. PURPOSE: To validate an alternative computed tomography (CT) technique to measure implant migration in shoulder arthroplasty. MATERIAL AND METHODS: A cadaver proximal humerus and a scapula, which had tantalum beads incorporated within them, were prepared to accept a short-stemmed humeral component and a two-pegged glenoid component of a commercial total shoulder arthroplasty (TSA) system. A five degree of freedom micrometer and goniometer equipped rig was used to translate and rotate the implant components relative to the respective bone to predetermined positions. Double CT examinations were performed for each position and CT motion analysis software (CTMA) was used to assess these movements. The accuracy and precision of the software was estimated using the rig's micrometers and goniometers as the gold standard. The technique's effective dose was also assessed. RESULTS: The accuracy was in the range of 0.07-0.23 mm in translation and 0.22-0.71° in rotation. The precision was in the range of 0.08-0.15 mm in translation and 0.23-0.54° in rotation. The mean effective dose for the CT scans was calculated to be 0.27 mSv. CONCLUSION: In this experimental setting, accuracy, precision, and effective dose of the CTMA technique were found to be comparable to that of RSA. Therefore, we believe clinical studies are warranted to determine if CTMA is a suitable alternative to traditional RSA for migration measurements in TSA.

The Bankart repair: past, present, and future.

Arthur Sidney Blundell Bankart was a London-based orthopedic surgeon who discovered the essential lesion in recurrent anterior shoulder instability in 1923. He pioneered a technique, the Bankart repair, to re-establish stability to the glenohumeral joint, without sacrificing native joint motion. In this article, the original Bankart repair is compared to the modern arthroscopic Bankart repair, accompanied by a surgical video of Blundell Bankart performing the Bankart repair in 1951, shortly before his death. Bankart's original description included an open repair with a coracoid osteotomy and subscapularis tenotomy and repair. The history of the technique, its utility in present day, and the future of the Bankart repair are discussed.

Hemiarthroplasties: the choice of prosthetic material causes different levels of damage in the articular cartilage.

BACKGROUND: Hemiarthroplasty has clear advantages over alternative procedures and is used in 20% of all shoulder joint replacements. Because of cartilage wear, the clinical outcome of hemiarthroplasty is unreliable and controversial. This paper suggests that the optimal choice of prosthetic material may reduce cartilage degeneration and improve the reliability of the procedure. The specific objectives were to assess 3 materials and assess how the severity of arthritis might affect the choice of prosthetic material. METHODS: A CoCr alloy, an AL2O3 ceramic, and a polycarbonate urethane polymer (PCU) were mechanically tested against 5 levels of human osteoarthritic cartilage (from intact to severely arthritic, n = 45). A high friction coefficient, a decrease in Young's modulus, an increase in permeability, a decrease in relaxation time, an increase in surface roughness, and a disrupted appearance of the cartilage after testing were used as measures of cartilage damage. The biomaterial that caused minimal cartilage damage was defined as superior. RESULTS: The CoCr caused the most damage. This was followed by the AL2O3 ceramic, whereas the PCU caused the least amount of damage. Although the degree of arthritis had an effect on the results, it did not change the trend that CoCr performed worst and PCU the best. DISCUSSION AND CONCLUSION: This study indicates that ceramic implants may be a better choice than metals, and the articulating surface should be as smooth as possible. Although our results indicate that the degree of arthritis should not affect the choice of prosthetic material, this suggestion needs to be further investigated.

A biomechanical confirmation of the relationship between critical shoulder angle (CSA) and articular joint loading.

BACKGROUND: The critical shoulder angle (CSA) has been shown to be correlated with shoulder disease states. The biomechanical hypothesis to explain this correlation is that the CSA changes the shear and compressive forces on the shoulder. The objective of this study is to test this hypothesis by use of a validated computational shoulder model. Specifically, this study assesses the impact on glenohumeral biomechanics of modifying the CSA. METHODS: An inverse dynamics 3-dimensional musculoskeletal model of the shoulder was used to quantify muscle forces and glenohumeral joint forces. The CSA was changed by altering the attachment point of the middle deltoid into a normal CSA (33°), a reduced CSA of 28°, and an increased CSA of 38°. Subject-specific kinematics of slow and fast speed abduction in the scapular plane and slow and fast forward flexion measured by a 3-dimensional motion capture system were used to quantify joint reaction shear and compressive forces. RESULTS: Increasing the CSA results in increased superior-inferior forces (shearing forces; integrated over the range of motion; P < .05). Reducing CSA results in increased lateromedial (compressive) forces for both the maximum and integrated sum of the forces over the whole motion (P < .01). DISCUSSION/CONCLUSION: Changes in the CSA modify glenohumeral joint biomechanics with increasing CSA producing higher shear forces that could contribute to rotator cuff overuse, whereas reducing the CSA results in higher compressive forces that contribute to joint wear.

Low-dose CT-based implant motion analysis is a precise tool for early migration measurements of hip cups: a clinical study of 24 patients.

Background and purpose - Early implant migration is known to be a predictive factor of clinical loosening in total hip arthroplasty (THA). Radiostereometric analysis (RSA) is the gold standard used to measure early migration in patients. However, RSA requires costly, specialized imaging equipment and the image process is complex. We determined the precision of an alternative, commercially available, CT method in 3 ongoing clinical THA studies, comprising 3 different cups.Materials and methods - 24 CT double examinations of 24 hip cups were selected consecutively from 3 ongoing prospective studies: 2 primary THA (1 cemented and 1 uncemented) and 1 THA (cemented) revision study. Precision of the CT-based implant motion analysis (CTMA) system was calculated separately for each study, using both the surface anatomy of the pelvis and metal beads placed in the pelvis.Results - For the CTMA analysis using the surface anatomy of the pelvis, the precision ranged between 0.07 and 0.31 mm in translation and 0.20° and 0.39° for rotation, respectively. For the CTMA analysis using beads the precision ranged between 0.08 and 0.20 mm in translation and between 0.20° and 0.43° for rotations. The radiation dose ranged between 0.2 and 2.3 mSv.Interpretation - CTMA achieved a clinically relevant and consistent precision between the 3 different hip cups studied. The use of different hip cup types, different CT scanners, or registration method (beads or surface anatomy) had no discernible effect on precision. Therefore, CTMA without the use of bone markers could potentially be an alternative to RSA to measure early migration.

The Eden-Hybbinette procedure is one hundred years old! A historical view of the concept and its evolutions.

INTRODUCTION: One hundred years ago, before Bankart, Latarjet or Bristow, Eden and Hybbinette developed a procedure to treat anterior shoulder instability and currently, this eponymous term is known by every shoulder surgeon. The purpose of this review is to summarise the historical "Eden-Hybbinette" procedure and its evolutions during the last century and discuss results. METHOD: On the centenary of the first publication on the "Eden-Hybbinette procedure", a search was conducted on Medline, Google Scholar and in the grey literature, to find its initial concept and description, and the evolutions. RESULTS: The initial procedure was based on the concepts of glenoid bony augmentation (anatomic reconstruction with an autograft from the tibia) and capsulorrhaphy. The main evolutionary themes identified were the origin of the graft (autograft with iliac crest, allograft), graft positioning and fixation (no fixation device, screws), and the surgical approach (split of the subscapularis tendon in open surgery, arthroscopy). Studies with long-term follow-up exhibited good results, considered similar as those with other classic bone-block procedures. Development of osteoarthritis during the following years after the procedure is not usual and not related to the graft unless if there is articular protrusion. CONCLUSION: The Eden-Hybbinette procedure is one of the oldest surgical interventions still commonly used for chronic anterior shoulder instability. The changes to the procedure over the last 100 years allow it to remain a contemporary solution for both primary surgery and revision cases.

Detection of early osteogenic commitment in primary cells using Raman spectroscopy.

Major challenges in the development of novel implant surfaces for artificial joints include osteoblast heterogeneity and the lack of a simple and sensitive in vitro assay to measure early osteogenic responses. Raman spectroscopy is a label-free, non-invasive and non-destructive vibrational fingerprinting optical technique that is increasingly being applied to detect biochemical changes in cells. In this study Raman spectroscopy has been used to obtain bone cell-specific spectral signatures and to identify any changes therein during osteoblast commitment and differentiation of primary cells in culture. Murine calvarial osteoblasts (COBs) were extracted and cultured and studied by Raman spectroscopy over a 14 day culture period. Distinct osteogenic Raman spectra were identified after 3 days of culture with strong bands detected for mineral: phosphate ν3 (1030 cm-1) and B-type carbonate (1072 cm-1), DNA (782 cm-1) and collagen matrix (CH2 deformation at 1450 cm-1) and weaker phosphate bands (948 and 970 cm-1). Early changes were detected by Raman spectroscopy compared to a standard enzymatic alkaline phosphatase (ALP) assay and gene expression analyses over this period. Proliferation of COBs was confirmed by fluorescence intensity measurements using the Picogreen dsDNA reagent. Changes in ALP levels were evident only after 14 days of culture and mRNA expression levels for ALP, Col1a1 and Sclerostin remained constant during the culture period. Sirius red staining for collagen deposition also revealed little change until day 14. In contrast Raman spectroscopy revealed the presence of amorphous calcium phosphate (945-952 cm-1) and carbonated apatite (957-962 cm-1) after only 3 days in culture and octacalcium phosphate (970 cm-1) considered a transient mineral phase, was detected after 5 days of COBs culture. PCA analysis confirmed clear separation between time-points. This study highlights the potential of Raman spectroscopy to be utilised for the early and specific detection of proliferation and differentiation changes in primary cultures of bone cells.

Spatial mapping of humeral head bone density.

BACKGROUND: Short-stem humeral replacements achieve fixation by anchoring to the metaphyseal trabecular bone. Fixing the implant in high-density bone can provide strong fixation and reduce the risk of loosening. However, there is a lack of data mapping the bone density distribution in the proximal humerus. The aim of the study was to investigate the bone density in proximal humerus. METHODS: Eight computed tomography scans of healthy cadaveric humeri were used to map bone density distribution in the humeral head. The proximal humeral head was divided into 12 slices parallel to the humeral anatomic neck. Each slice was then divided into 4 concentric circles. The slices below the anatomic neck, where short-stem implants have their fixation features, were further divided into radial sectors. The average bone density for each of these regions was calculated, and regions of interest were compared using a repeated-measures analysis of variance with significance set at P < .05. RESULTS: Average apparent bone density was found to decrease from proximal to distal regions, with the majority of higher bone density proximal to the anatomic neck of the humerus (P < .05). Below the anatomic neck, bone density increases from central to peripheral regions, where cortical bone eventually occupies the space (P < .05). In distal slices below the anatomic neck, a higher bone density distribution in the medial calcar region was also observed. CONCLUSION: This study indicates that it is advantageous with respect to implant fixation to preserve some bone above the anatomic neck and epiphyseal plate and to use the denser bone at the periphery.

Rotator cuff-sparing approaches for glenohumeral joint access: an anatomic feasibility study.

BACKGROUND: The deltopectoral approach for total shoulder arthroplasty can result in subscapularis dysfunction. In addition, glenoid wear is more prevalent posteriorly, a region difficult to access with this approach. We propose a posterior approach for access in total shoulder arthroplasty that uses the internervous interval between the infraspinatus and teres minor. This study compares this internervous posterior approach with other rotator cuff-sparing techniques, namely, the subscapularis-splitting and rotator interval approaches. METHODS: The 3 approaches were performed on 12 fresh frozen cadavers. The degree of circumferential access to the glenohumeral joint, the force exerted on the rotator cuff, the proximity of neurovascular structures, and the depth of the incisions were measured, and digital photographs of the approaches in different arm positions were analyzed. RESULTS: The posterior approach permits direct linear access to 60% of the humeral and 59% of the glenoid joint circumference compared with 39% and 42% for the subscapularis-splitting approach and 37% and 28% for the rotator interval approach. The mean force of retraction on the rotator cuff was 2.76 (standard deviation [SD], 1.10) N with the posterior approach, 2.72 (SD, 1.22) N with the rotator interval, and 4.75 (SD, 2.56) N with the subscapularis-splitting approach. From the digital photographs and depth measurements, the estimated volumetric access available for instrumentation during surgery was comparable for the 3 approaches. CONCLUSION: The internervous posterior approach provides greater access to the shoulder joint while minimizing damage to the rotator cuff.

A CT scan protocol for the detection of radiographic loosening of the glenoid component after total shoulder arthroplasty.

BACKGROUND AND PURPOSE: It is difficult to evaluate glenoid component periprosthetic radiolucencies in total shoulder arthroplasties (TSAs) using plain radiographs. This study was performed to evaluate whether computed tomography (CT) using a specific patient position in the CT scanner provides a better method for assessing radiolucencies in TSA. METHODS: Following TSA, 11 patients were CT scanned in a lateral decubitus position with maximum forward flexion, which aligns the glenoid orientation with the axis of the CT scanner. Follow-up CT scanning is part of our routine patient care. Glenoid component periprosthetic lucency was assessed according to the Molé score and it was compared to routine plain radiographs by 5 observers. RESULTS: The protocol almost completely eliminated metal artifacts in the CT images and allowed accurate assessment of periprosthetic lucency of the glenoid fixation. Positioning of the patient within the CT scanner as described was possible for all 11 patients. A radiolucent line was identified in 54 of the 55 observed CT scans and osteolysis was identified in 25 observations. The average radiolucent line Molé score was 3.4 (SD 2.7) points with plain radiographs and 9.5 (SD 0.8) points with CT scans (p = 0.001). The mean intra-observer variance was lower in the CT scan group than in the plain radiograph group (p = 0.001). INTERPRETATION: The CT scan protocol we used is of clinical value in routine assessment of glenoid periprosthetic lucency after TSA. The technique improves the ability to detect and monitor radiolucent lines and, therefore, possibly implant loosening also.

Preoperative planning to preserve glenoid subchondral bone in anatomical total shoulder replacement.

Background: Glenoid loosening remains a concern in anatomical total shoulder replacement. Preoperative planning software allows optimization of the component positioning, but the target orientation remains unclear due to conflicting optimization priorities. Commonly, the component is aligned to the prescribed version and inclination that reflect the population's average anatomy. The freehand technique attempts to secure strong fixation by aiming to preserve the subchondral bone. This study compared the state of the subchondral plate after reaming and compared the results of these two techniques. Methods: Two groups of shoulder computed tomography scans were assessed, 34 normal and 34 osteoarthritic. Preoperative planning software was used to place the glenoid component in prescribed adjusted angles, with neutral (0o,0o), retroverted (-10o,0o) and inclined alignment (0o,10o). The computed tomography Hounsfield values at the virtually reamed surface were assessed to determine the percentage of the intended component-bone interface consisting of cortical bone, here termed "cortical bone seating". This was then compared to positioning the component using a freehand technique. Results: The freehand technique improved cortical bone seating in the osteoarthritic group with a mean (standard deviation) of 53.3% (14.3), while neutral alignment resulted in 36.7% (10.8), retroversion 40.4% (13.1), and inclination 39.3% (13.5), P < .001. A similar trend was observed in the normal group. Conclusions: The freehand method resulted in significantly improved cortical bone seating compared to the prescribed adjusted angles. These findings question the use of a one-size-fits-all-orientation and suggest that applying a technique that aims for maximum cortical fixation (freehand) may reduce the risk of aseptic loosening.

Reliability of a set of protractors for direct anatomical measurements around the glenoid and humeral head rims.

Functional biomechanics studies of the glenohumeral (GH) soft tissues require an understanding of their sites of bony attachment. Anatomical positions of GH capsular structures have often been quantified relative to the rims of the glenoid and humeral head (HH). The aim of this study was twofold: (1) to quantify the reliability of a set of protractors that directly fit on to the glenoid and HH rims and (2) to use this to determine direct angular position referencing of landmarks and soft tissue attachment points. Three assessors independently used the protractors to assess nine prescribed landmarks on 30 dry bone specimens (15 glenoids and 15 HHs) recording the angular positions of the structures relative to the glenoid and HH. The collected data showed high levels of validity as indicated by the protractor's intra- and inter-assessor reliabilities: 98.2 and 98.7% for the glenoid component, and 96.2 and 96.5% for the humeral component, respectively. The device could be useful in anatomical studies, description of defects and pathologies on glenohumeral articulation, and planning of scapular reconstructive surgery.

A comparison of the degree of retraction of full-thickness supraspinatus tears with the Goutallier grading system.

BACKGROUND: Tears of the supraspinatus are common and incompletely understood. The degree of fatty infiltration into the muscle is perceived to be a determining factor of successful surgical repair and postoperative function. It is the hypothesis of this study that the degree of central tendon retraction (CTR) as seen on magnetic resonance imaging corresponds to the amount of fatty infiltration classified according to the Goutallier grading system. MATERIALS AND METHODS: Magnetic resonance imaging scans of the supraspinatus were reviewed in 2 identifiable groups: 143 scans with no tear (NT) and 148 scans with a full-thickness tear (FTT) and CTR. The degree of CTR and the corresponding Goutallier grade were measured. The difference in Goutallier grade between the NT and FTT groups was measured with the Mann-Whitney test. The relationship between Goutallier grade and increasing amount of CTR was described by use of Spearman rank correlation. Studying the difference between the Goutallier grades and CTR was achieved by use of Mann-Whitney tests. RESULTS: Of NT scans, 100% showed Goutallier grade 0 or 1. Among FTT scans, 2 showed grade 0, 21 showed grade 1, 35 showed grade 2, 14 showed grade 3, and 76 showed grade 4. The difference was statistically significant (P < .001) between the Goutallier grade 3 and 4 scans, and the degree of Goutallier grade increased with increasing CTR (P < .001). CONCLUSION: Fatty infiltration can be directly linked to CTR and, as such, may help to determine surgical intervention between groups.

Development and validation of a model for quantifying glenohumeral ligament strains during function.

Analysis of the function of glenohumeral ligaments (GHLs) during physical joint manipulations is hindered by an inability to adequately image these tissues during the movements. This restricts functional biomechanics studies only to the manoeuvres that may be replicated cadaverically. There is, however, a clinical imperative to be able to investigate complex manoeuvres that exacerbate symptoms but cannot be easily conducted physically in the laboratory. The aim of this study was to develop and validate an algorithm for a computer simulation model that allows the quantification of glenohumeral ligament lengths during function. Datasets of the humerus and scapula pair were segmented to provide individual surface meshes of the bones and insertion points of each glenohumeral ligament on both bones. An algorithm was developed in which the glenohumeral ligament attachment-to-attachment length was divided into two straight lines, plus an arc overlaying the spherical wrapping portions. The model was validated by simulating two classical cadaveric studies from the literature and comparing results. Predictions from the model were qualitatively similar to the results of the two cadaveric studies by a factor of 91.7% and 81.8%, respectively. Algorithm application will allow investigation of functional loading of the glenohumeral ligaments during simulated complex motions. This could then be used to provide diagnostic understanding and thus, inform surgical reconstruction.

Total shoulder arthroplasty does not correct the orientation of the eroded glenoid.

BACKGROUND AND PURPOSE: Alignment of the glenoid component with the scapula during total shoulder arthroplasty (TSA) is challenging due to glenoid erosion and lack of both bone stock and guiding landmarks. We determined the extent to which the implant position is governed by the preoperative erosion of the glenoid. Also, we investigated whether excessive erosion of the glenoid is associated with perforation of the glenoid vault. METHODS: We used preoperative and postoperative CT scans of 29 TSAs to assess version, inclination, rotation, and offset of the glenoid relative to the scapula plane. The position of the implant keel within the glenoid vault was classified into three types: centrally positioned, component touching vault cortex, and perforation of the cortex. RESULTS: Preoperative glenoid erosion was statistically significantly linked to the postoperative placement of the implant regarding all position parameters. Retroversion of the eroded glenoid was on average 10° (SD10) and retroversion of the implant after surgery was 7° (SD11). The implant keel was centered within the vault in 7 of 29 patients and the glenoid vault was perforated in 5 patients. Anterior cortex perforation was most frequent and was associated with severe preoperative posterior erosion, causing implant retroversion. INTERPRETATION: The position of the glenoid component reflected the preoperative erosion and "correction" was not a characteristic of the reconstructive surgery. Severe erosion appears to be linked to vault perforation. If malalignment and perforation are associated with loosening, our results suggest reorientation of the implant relative to the eroded surface.

An anatomical description of the pennation angles and central tendon angle of the supraspinatus both in its normal configuration and with full thickness tears.

HYPOTHESIS: It is hypothesized that supraspinatus central tendon retraction is related to functional deficit; yet, there is no literature comparing the normal and pathological pennation and central tendon angles using magnetic resonance imaging (MRI). Therefore, the aim of this study was to quantify the anterior and posterior muscle pennation angles, central tendon angle, and retraction of the supraspinatus using MRI. METHODS: Anterior pennation angle (APA), posterior pennation angle (PPA), and central tendon angle (CTA) were measured from 2 groups: no tear (NT, n = 157), full thickness tears (FTT) with retraction (FTT, n = 156). RESULTS: No tear (NT) average APA, PPA, and CTA were 19.0° (SD 5.9), 4.0° (SD 3.2), and 17.8° (SD 5.1). All differences were statistically significant (PPA < APA, P < .001; PPA < CTA, P < .001; CTA < APA, P < .001). FTT averages were 17.6° (SD 8.6), 16.7° (SD 12.2), and 7.3° (SD 4.9). Increasing retraction correlated to PPA (P < .001), APA (P < .002), and CTA (P < .001). CONCLUSION: The size of a supraspinatus tear is directly correlated with muscle pennation and tendon retraction, and provides a direct measurement from MRI that can now be employed in further studies of functional deficit and tendon tear size.

Rotator cuff repair failure in vivo: a radiostereometric measurement study.

BACKGROUND: The prevalence of failure among repairs of the rotator cuff is well known, but very few objective data exist regarding either the scale or timing of this complication. The aim of this study was to use a previously validated modified technique of roentgen stereophotogrammetric analysis to monitor the behavior of the rotator cuff after repair to establish at what point failure may occur. MATERIALS AND METHODS: A series of 10 patients had metal beads and wire sutures embedded into the humeral greater tuberosity and supraspinatus tendon, respectively, during open cuff repair procedures. Roentgen stereophotogrammetric analysis imaging of the repaired rotator cuffs was performed at set intervals during the first year after surgery. RESULTS: The mean distance between the tendon and bone markers did not increase significantly between the time of surgery and 3 to 4 weeks. There was then a significant increase of 7.0 mm in the distance between the tendon and bone markers, with the largest increase occurring between 3 to 4 weeks and 12 to 14 weeks after surgery, as well as a further small but significant increase of 1.7 mm between 12 to 14 weeks and 1 year. These results were compared with clinical examination and ultrasound findings. CONCLUSION: Most tendon marker movement was seen during the most intensive period of physiotherapy, in the second and third months after surgery. Significantly more movement was seen in the tendon markers of those patients in whom the repair failed.