Programmable Compartment Networks by Unraveling the Stress-Dependent Deformation of Polymer Vesicles.

Nanocontainers that can sense and respond to environmental stimuli like cells are desirable for next-generation delivery systems. However, it is still a grand challenge for synthetic nanocontainers to mimic or even surpass the shape adaption of cells, which may produce novel compartments for cargo loading. Here, this work reports the engineering of compartment network with a single polymer vesicle by unraveling osmotic stress-dependent deformation. Specifically, by manipulating the way in exerting the stress, sudden increase or gradual increase, polymer vesicles can either undergo deflation into the stomatocyte, a bowl-shaped vesicle enclosing a new compartment, or tubulation into the tubule of varied length. Such stress-dependent deformation inspired us to program the shape transformation of polymer vesicles, including tubulation, deflation, or first tubulation and then deflation. The coupled deformation successfully transforms the polymer vesicle into the stomatocyte with tubular arms and a network of two or three small stomatocytes connected by tubules. To the author's knowledge, these morphologies are still not accessed by synthetic nanocontainers. This work envisions that the network of stomatocytes may enable the loading of different catalysts to construct novel motile systems, and the well-defined morphology of vesicles helps to define the effect of morphology on cellar uptake.

The average magnetic anisotropy of polystyrene in polymersomes self-assembled from poly(ethylene glycol)-b-polystyrene.

Using the diamagnetic anisotropy of polymers for the characterization of polymers and polymer aggregates is a relatively new approach in the field of soft-matter and polymer research. So far, a good and thorough quantitative description of these diamagnetic properties has been lacking. Using a simple equation that links the magnetic properties of an average polymer repeating unit to those of the polymer vesicle of any shape, we measured, using magnetic birefringence, the average diamagnetic anisotropy of a polystyrene (PS) repeating unit, ΔχPS, inside a poly(ethylene glycol)-polystyrene (PEG-PS) polymersome membrane as a function of the PS-length and as a function of the preparation method. All obtained values of ΔχPS have a negative sign which results in polymers tending to align perpendicular to an applied magnetic field. Combined, the same order of magnitude of ΔχPS (10-12 m3 mol-1) for all polymersome shapes proves that the individual polymers are organized similarly regardless of the PS length and polymersome shape. Furthermore, the value found is only a fraction (∼1%) of what it can maximally be due to the random coiling of the polymers. We, therefore, predict that further ordering of the polymers within the membrane could lead to similar responses at much lower magnetic fields, possibly obtainable with permanent magnets, which would be highly advantageous for practical applications.

Magnetic Stiffening in 3D Cell Culture Matrices.

The mechanical environment of a cell is not constant. This dynamic behavior is exceedingly difficult to capture in (synthetic) in vitro matrices. This paper describes a novel, highly adaptive hybrid hydrogel composed of magnetically sensitive magnetite nanorods and a stress-responsive synthetic matrix. Nanorod rearrangement after application of (small) magnetic fields induces strain in the network, which results in a strong (over 10-fold) stiffening even at minimal (2.5 wt %) nanorod concentrations. Moreover, the stiffening mechanism yields a fast and fully reversible response. In the manuscript, we quantitatively analyze that forces generated by the particles are comparable to cellular forces. We demonstrate the value of magnetic stiffening in a 3D MCF10A epithelial cell experiment, where simply culturing on top of a permanent magnet gives rise to changes in the cell morphology. This work shows that our hydrogels are uniquely suited as 3D cell culture systems with on-demand adaptive mechanical properties.

Understanding Antiferromagnetic Coupling in Lead-Free Halide Double Perovskite Semiconductors.

Solution-processable semiconductors with antiferromagnetic (AFM) order are attractive for future spintronics and information storage technology. Halide perovskites containing magnetic ions have emerged as multifunctional materials, demonstrating a cross-link between structural, optical, electrical, and magnetic properties. However, stable optoelectronic halide perovskites that are antiferromagnetic remain sparse, and the critical design rules to optimize magnetic coupling still must be developed. Here, we combine the complementary magnetometry and electron-spin-resonance experiments, together with first-principles calculations to study the antiferromagnetic coupling in stable Cs2(Ag:Na)FeCl6 bulk semiconductor alloys grown by the hydrothermal method. We show the importance of nonmagnetic monovalence ions at the BI site (Na/Ag) in facilitating the superexchange interaction via orbital hybridization, offering the tunability of the Curie-Weiss parameters between -27 and -210 K, with a potential to promote magnetic frustration via alloying the nonmagnetic BI site (Ag:Na ratio). Combining our experimental evidence with first-principles calculations, we draw a cohesive picture of the material design for B-site-ordered antiferromagnetic halide double perovskites.

The enzyme mechanism of nitrite reductase studied at single-molecule level.

A generic method is described for the fluorescence "readout" of the activity of single redox enzyme molecules based on Förster resonance energy transfer from a fluorescent label to the enzyme cofactor. The method is applied to the study of copper-containing nitrite reductase from Alcaligenes faecalis S-6 immobilized on a glass surface. The parameters extracted from the single-molecule fluorescence time traces can be connected to and agree with the macroscopic ensemble averaged kinetic constants. The rates of the electron transfer from the type 1 to the type 2 center and back during turnover exhibit a distribution related to disorder in the catalytic site. The described approach opens the door to single-molecule mechanistic studies of a wide range of redox enzymes and the precise investigation of their internal workings.

Phase-transition-induced jumping, bending, and wriggling of single crystal nanofibers of coronene.

For decades, it has been reported that some organic crystals suddenly crack, break, or jump when they are heated from room temperature. Recently, such crystals have been intensively studied both in fundamental science and for high-speed mechanical device applications. According to these studies, the sudden crystal motions have been attributed to structural phase transitions induced by heating. Stress created by the phase transition is released through the sudden and rapid motion of the crystals. Here we report that single crystal nanofibers of coronene exhibit a new type of ultrafast motion when they are cooled from room temperature and subsequently heated to room temperature. The nanofibers make centimeter-scale jumps accompanied by surprisingly unique behaviors such as sharp bending and wriggling. We found that the motions are caused by a significantly fast structural phase transition between two polymorphs of coronene. A theoretical investigation revealed that the sudden force generated by the phase transition together with the nanoscale dimensions and elastic properties create dynamical instability in the nanofibers that results in the motions. Our finding demonstrates the novel mechanism that leads to ultrafast, large deformation of organic crystals.

Preparation of biomolecule microstructures and microarrays by thiol-ene photoimmobilization.

A mild, fast and flexible method for photoimmobilization of biomolecules based on the light-initiated thiol-ene reaction has been developed. After investigation and optimization of various surface materials, surface chemistries and reaction parameters, microstructures and microarrays of biotin, oligonucleotides, peptides, and MUC1 tandem repeat glycopeptides were prepared with this photoimmobilization method. Furthermore, MUC1 tandem repeat glycopeptide microarrays were successfully used to probe antibodies in mouse serum obtained from vaccinated mice. Dimensions of biomolecule microstructures were shown to be freely controllable through photolithographic techniques, and features down to 5 microm in size covering an area of up to 75x25 mm were created. Use of a confocal laser microscope with a UV laser as UV-light source enabled further reduction of biotin feature size opening access to nanostructured biochips.

Magnetic Sedimentation Velocities and Equilibria in Dilute Aqueous Ferrofluids.

Dilute ferrofluids have important applications in the separation of materials via magnetic levitation. However, dilute ferrofluids pose an additional challenge compared to concentrated ones. Migration of the magnetic nanoparticles toward a magnet is not well counteracted by a buildup of an osmotic pressure gradient, and consequently, homogeneity of the fluid is gradually lost. Here, we investigate this phenomenon by measuring and numerically modeling time-dependent concentration profiles in aqueous ferrofluids in the field of a neodymium magnet and at 10 T in a Bitter magnet. The numerical model incorporates magnetic, frictional, and osmotic forces on the particles and takes into account the polydispersity of the particles and the spatial dependence of the magnetic field. The magnetic sedimentation rate in our most stable ferrofluids can be understood in terms of the magnetophoresis of separate nanoparticles, a best-case scenario when it comes to applications.

Colloidal Stability of Aqueous Ferrofluids at 10 T.

Magnetic density separation is an emerging recycling technology by which several different waste materials-from plastic products, electronics, or other-can be sorted in a single continuous processing step. Larger-scale installations will require ferrofluids that remain stable at several teslas, high magnetic fields at which colloidal stability was not investigated before. Here we optically monitor the concentration profile of iron oxide nanoparticles in aqueous ferrofluids at a field of 10 T and a gradient of 100 T/m. The sedimentation velocities and equilibrium concentration profiles inform on maintenance or breakdown of colloidal stability, which depends on the concentration and magnetic coupling energy of the nanoparticles. Comparison with results obtained with a small neodymium magnet indicate that stability at moderate fields is predictive of stability at much higher fields, which facilitates the development of new ferrofluids dedicated to magnetic density separation.

Scaffold-free and label-free biofabrication technology using levitational assembly in a high magnetic field.

The feasibility of magnetic levitational bioassembly of tissue-engineered constructs from living tissue spheroids in the presence of paramagnetic ions (i.e. Gd3+) was recently demonstrated. However, Gd3+ is relatively toxic at concentrations above 50 mM normally used to enable magnetic levitation with NdFeB-permanent magnets. Using a high magnetic field (a 50 mm-bore, 31 T Bitter magnet) at the High Field Magnet Laboratory at Radboud University in Nijmegen, The Netherlands, we performed magnetic levitational assembly of tissue constructs from living spheroids prepared from the SW1353 chondrosarcoma cell line at 0.8 mM Gd3+ containing salt gadobutrol at 19 T magnetic field. The parameters of the levitation process were determined on the basis of polystyrene beads with a 170 µm-diameter. To predict the theoretical possibility of assembly, a zone of stable levitation in the horizontal and vertical areas of cross sections was previously calculated. The construct from tissue spheroids partially fused after 3 h in levitation. The analysis of viability after prolonged exposure (1 h) to strong magnetic fields (up to 30 T) showed the absence of significant cytotoxicity or morphology changes in the tissue spheroids. A high magnetic field works as a temporal and removal support or so-called 'scaffield'. Thus, formative biofabrication of tissue-engineered constructs from tissue spheroids in the high magnetic field is a promising research direction.

Biofabrication of a Functional Tubular Construct from Tissue Spheroids Using Magnetoacoustic Levitational Directed Assembly.

In traditional tissue engineering, synthetic or natural scaffolds are usually used as removable temporal support, which involves some biotechnology limitations. The concept of "scaffield" approach utilizing the physical fields instead of biomaterial scaffold has been proposed recently. In particular, a combination of intense magnetic and acoustic fields can enable rapid levitational bioassembly of complex-shaped 3D tissue constructs from tissue spheroids at low concentration of paramagnetic agent (gadolinium salt) in the medium. In the current study, the tissue spheroids from human bladder smooth muscle cells (myospheres) are used as building blocks for assembling the tubular 3D constructs. Levitational assembly is accomplished at low concentrations of gadolinium salts in the high magnetic field at 9.5 T. The biofabricated smooth muscle constructs demonstrate contraction after the addition of vasoconstrictive agent endothelin-1. Thus, hybrid magnetoacoustic levitational bioassembly is considered as a new technology platform in the emerging field of formative biofabrication. This novel technology of scaffold-free, nozzle-free, and label-free bioassembly opens a unique opportunity for rapid biofabrication of 3D tissue and organ constructs with complex geometry.

Control of surface plasmon localization via self-assembly of silver nanoparticles along silver nanowires.

A simple and low-cost method to create metal-metal hybrid nanostructures possessing fairly regularly spaced "hot-spots" of surface plasmon resonances is proposed. The nanohybrid structure was prepared via self-assembly during a simple drop-casting procedure, using chemically synthesized silver nanowires and silver nanoparticles prepared in a single batch of a polyol process. Wide field illumination of these nanohybrids produced hot-spots with spacings of around 500 nm to 1 microm. The intensity of the emission/scattering from the hot-spots fluctuates over time. The proposed structure can be useful for the development of molecular-sensors or as a substrate for surface enhanced Raman/fluorescence spectroscopy.

Confining Potential as a Function of Polymer Stiffness and Concentration in Entangled Polymer Solutions.

We directly track the tubelike motion of individual fluorescently labeled polymer molecules in a concentrated solution of unlabeled polymers. We use a single molecule wide-field fluorescence microscopy technique that is able to determine characteristic properties of the polymer dynamics, such as the confining potential, the tube diameter, and the Rouse time. The use of synthetic polymers allows us to investigate the confined motion of the polymer chains not only as a function of polymer concentration (mesh size) but also versus the persistence length of the matrix polymers. Although the polymers used have a persistence length much smaller than their contour length, our experimental results lead to a dependence of the tube diameter on both the mesh size and the persistence length, which follows the theoretically predicted relation for semiflexible chains.

Do enzymes sleep and work?

Single-enzyme studies suggest that dynamic disorder is a general characteristic of enzyme catalysis.

Synthesis and single enzyme activity of a clicked lipase-BSA hetero-dimer.

Click chemistry is used to construct a novel lipase-BSA hetero-dimer, in which the latter protein acts as a foot enabling the anchoring of the enzyme onto the surface for single enzyme studies.

An unforeseen polymorph of coronene by the application of magnetic fields during crystal growth.

The continued development of novel drugs, proteins, and advanced materials strongly rely on our ability to self-assemble molecules in solids with the most suitable structure (polymorph) in order to exhibit desired functionalities. The search for new polymorphs remains a scientific challenge, that is at the core of crystal engineering and there has been a lack of effective solutions to this problem. Here we show that by crystallizing the polyaromatic hydrocarbon coronene in the presence of a magnetic field, a polymorph is formed in a ß-herringbone structure instead of the ubiquitous γ-herringbone structure, with a decrease of 35° in the herringbone nearest neighbour angle. The ß-herringbone polymorph is stable, preserves its structure under ambient conditions and as a result of the altered molecular packing of the crystals, exhibits significant changes to the optical and mechanical properties of the crystal.

Nanoscale Study of Polymer Dynamics.

The thermal motion of polymer chains in a crowded environment is anisotropic and highly confined. Whereas theoretical and experimental progress has been made, typically only indirect evidence of polymer dynamics is obtained either from scattering or mechanical response. Toward a complete understanding of the complicated polymer dynamics in crowded media such as biological cells, it is of great importance to unravel the role of heterogeneity and molecular individualism. In the present work, we investigate the dynamics of synthetic polymers and the tube-like motion of individual chains using time-resolved fluorescence microscopy. A single fluorescently labeled polymer molecule is observed in a sea of unlabeled polymers, giving access to not only the dynamics of the probe chain itself but also to that of the surrounding network. We demonstrate that it is possible to extract the characteristic time constants and length scales in one experiment, providing a detailed understanding of polymer dynamics at the single chain level. The quantitative agreement with bulk rheology measurements is promising for using local probes to study heterogeneity in complex, crowded systems.

Self-Assembly and Manipulation of Crown Ether Phthalocyanines at the Gel-Graphite Interface.

Two "face-on" phases and one "edge-on" lamellar phase comprised of self-assembled structures of phthalocyanines have been visualized by scanning tunneling microscopy (STM) at the gel-graphite interface. The switching between the phases can be stimulated with the microscope tip with a resolution on the molecular scale. The STM image shows the manipulated area consisting of π-π stacked phthalocyanines forming the lamellar phase, which is embedded in a hexagonally packed "face-on" phase.

Dynamic disorder in single-enzyme experiments: facts and artifacts.

Using a single-molecule fluorescence approach, the time series of catalytic events of an enzymatic reaction can be monitored, yielding a sequence of fluorescent "on"- and "off"-states. An accurate on/off-assignment is complicated by the intrinsic and extrinsic noise in every single-molecule fluorescence experiment. Using simulated data, the performance of the most widely employed binning and thresholding approach was systematically compared to change point analysis. It is shown that the underlying on- and off-histograms as well as the off-autocorrelation are not necessarily extracted from the "signal'' buried in noise. The shapes of the on- and off-histograms are affected by artifacts introduced by the analysis procedure and depend on the signal-to-noise ratio and the overall fluorescence intensity. For experimental data where the background intensity is not constant over time we consider change point analysis to be more accurate. When using change point analysis for data of the enzyme α-chymotrypsin, no characteristics of dynamic disorder was found. In light of these results, dynamic disorder might not be a general sign of enzymatic reactions.