CO2: a wild solvent, tamed.

This article reviews approaches for modification of solvent properties of supercritical carbon dioxide (scCO(2)), with particular reference to self-assembly of oligomeric and polymeric solute additives. Of special interest are viscosity modifiers for scCO(2) based on molecular self-assembly. Background on polymers and surfactants with CO(2)-compatible functionalities is covered, leading on to the attempts made so far to increase the scCO(2) viscosity, which are described in detail. The significance of this field, and the implications a breakthrough could bring environmentally and economically will be addressed.

Hydrocarbon metallosurfactants for CO2.

Cobalt and nickel salts of the highly branched trichain anionic surfactant sodium 1,4-bis(neopentyloxy)-3-(neopentyloxycarbonyl)-1,4-dioxobutane-2-sulfonate (TC14) are shown to be soluble in dense CO(2) at concentrations up to 6 wt % at 500 bar pressure. This is a remarkably high solubility for such hydrocarbon transition metal surfactants in CO(2). High-pressure small-angle neutron scattering (HP-SANS) has been used to study the surfactant aggregates in a normal organic solvent, cyclohexane, dense CO(2), and also mixtures of these two pure solvents. The results show that transition metal TC14 derivatives are viable compounds for incorporating reactive and functional metal ions into CO(2).

Rod-like micelles thicken CO(2).

A new approach to thicken dense liquid CO(2) is described using the principles of self-assembly of custom-made CO(2) compatible fluorinated dichain surfactants. Solutions of surfactants in CO(2) have been investigated by high-pressure phase behavior, small-angle neutron scattering (HP-SANS) and falling cylinder viscosity experiments. The results show that it is possible to control surfactant aggregation to generate long, thin reversed micellar rods in dense CO(2), which at 10 wt % can lead to viscosity enhancements of up to 90% compared to pure CO(2). This represents the first example of CO(2) viscosity modifiers based on anisotropic reversed micelles.

Anisotropic reversed micelles with fluorocarbon-hydrocarbon hybrid surfactants in supercritical CO2.

Previous work (M. Sagisaka, et al. Langmuir 31 (2015) 7479-7487), showed the most effective fluorocarbon (FC) and hydrocarbon (HC) chain lengths in the hybrid surfactants FCm-HCn (sodium 1-oxo-1-[4-(perfluoroalkyl)phenyl]alkane-2-sulfonates, where m = FC length and n = HC length) were m and n = 6 and 4 for water solubilization, whereas m 6 and n 6, or m 6 and n 5, were optimal chain lengths for reversed micelle elongation in supercritical CO2. To clarify why this difference of only a few methylene chain units is so effective at tuning the solubilizing power and reversed micelle morphology, nanostructures of water-in-CO2 (W/CO2) microemulsions were investigated by high-pressure small-angle neutron scattering (SANS) measurements at different water-to-surfactant molar ratios (W0) and surfactant concentrations. By modelling SANS profiles with cylindrical and ellipsoidal form factors, the FC6-HCn/W/CO2 microemulsions were found to increase in size with increasing W0 and surfactant concentration. Ellipsoidal cross-sectional radii of the FC6-HC4/W/CO2 microemulsion droplets increased linearly with W0, and finally reached ∼39 Šand ∼78 Šat W0 = 85 (close to the upper limit of solubilizing power). These systems appear to be the largest W/CO2 microemulsion droplets ever reported. The aqueous domains of FC6-HC6 rod-like reversed micelles increased in size by 3.5 times on increasing surfactant concentration from 35 mM to 50 mM: at 35 mM, FC6-HC5 formed rod-like reversed micelles 5.3 times larger than FC6-HC6. Interestingly, these results suggest that hybrid HC-chains partition into the microemulsion aqueous cores with the sulfonate headgroups, or at the W/CO2 interfaces, and so play important roles for tuning the W/CO2 interfacial curvature. The super-efficient W/CO2-type solubilizer FC6-HC4, and the rod-like reversed micelle forming surfactant FC6-HC5, represent the most successful cases of low fluorine content additives. These surfactants facilitate VOC-free, effective and energy-saving CO2 solvent systems for applications such as extraction, dyeing, dry cleaning, metal-plating, enhanced oil recovery and organic/inorganic or nanomaterial synthesis.

Carbon dioxide-in-oil emulsions stabilized with silicone-alkyl surfactants for waterless hydraulic fracturing.

The design of surfactants for CO2/oil emulsions has been elusive given the low CO2-oil interfacial tension, and consequently, low driving force for surfactant adsorption. Our hypothesis is that waterless, high pressure CO2/oil emulsions can be stabilized by hydrophobic comb polymer surfactants that adsorb at the interface and sterically stabilize the CO2 droplets. The emulsions were formed by mixing with an impeller or by co-injecting CO2 and oil through a beadpack (CO2 volume fractions (ϕ) of 0.50-0.90). Emulsions were generated with comb polymer surfactants with a polydimethylsiloxane (PDMS) backbone and pendant linear alkyl chains. The C30 alkyl chains are CO2-insoluble but oil soluble (oleophilic), whereas PDMS with more than 50 repeat units is CO2-philic but only partially oleophilic. The adsorbed surfactants sterically stabilized CO2 droplets against Ostwald ripening and coalescence. The optimum surfactant adsorption was obtained with a PDMS degree of polymerization of ∼88 and seven C30 side chains. The emulsion apparent viscosity reached 18 cP at a ϕ of 0.70, several orders of magnitude higher than the viscosity of pure CO2, with CO2 droplets in the 10-150 µm range. These environmentally benign waterless emulsions are of interest for hydraulic fracturing, especially in water-sensitive formations.

Synthesis and steric stabilization of silver nanoparticles in neat carbon dioxide solvent using fluorine-free compounds.

The adjustable solvent properties, vanishingly low surface tensions, and environmentally green characteristics of supercritical carbon dioxide present certain advantages in nanoparticles synthesis and processing. Unfortunately, most current techniques employed to synthesize and disperse nanoparticles in carbon dioxide use environmentally persistent fluorinated compounds as metal precursors and/or stabilizing ligands. This paper illustrates a one-step process for synthesis and stabilization of silver nanoparticles in carbon dioxide using only fluorine-free compounds. Isostearic acid coated silver nanoaparticles were formed and stably dispersed through arrested precipitation. Silver bis(3,5,5-trimethyl-1-hexyl)sulfosuccinate (Ag-AOT-TMH) was reduced in the presence of isostearic acid as a capping ligand in carbon dioxide solvent to form silver nanoparticles. The addition of cyclohexane as cosolvent or an increase in carbon dioxide solvent density enhances the dispersibility of the particles due to an increase in solvent strength. The dispersibility of the isostearic acid capped silver nanoparticles diminished with time until a stable dispersion was achieved due to the precipitation of a fraction of particle sizes too large to be stabilized by the solvent medium, thereby leaving a smaller size fraction of nanoparticles stably dispersed in the CO2 mixtures. This paper presents the one-step synthesis and stabilization of metallic nanoparticles in neat carbon dioxide without the aid of any fluorinated compounds.

Stable dispersions of silver nanoparticles in carbon dioxide with fluorine-free ligands.

Iso-stearic acid, a short, stubby compound with branched, methylated tails has been shown to have high solubility in carbon dioxide. Tail solvation by carbon dioxide makes iso-stearic acid a good choice for use as a ligand to sterically stabilize metallic nanoparticles. Iso-stearic acid coated silver nanoparticles have been stably dispersed in carbon dioxide with hexane cosolvent. Neat carbon dioxide has successfully dispersed iso-stearic acid coated silver nanoparticles that had been deposited on either quartz or polystyrene surfaces. These results are the first reports of sterically stabilized nanoparticles in carbon dioxide without the use of any fluorinated compounds.

Peracetylated sugar derivatives show high solubility in liquid and supercritical carbon dioxide.

[structure: see text] Acetylated sugars derivatives exhibit high solubility in liquid and supercritical carbon dioxide (scCO(2)). Peracetylated sorbitol and beta-D-galactose are soluble under mild conditions in scCO(2), high pressures are required to dissolve peracetylated beta-cyclodextrin, and peracetoxyalkyl chains impart CO(2)-solubility to amides.

Effect of isomeric structures of branched cyclic hydrocarbons on densities and equation of state predictions at elevated temperatures and pressures.

The cis and trans conformation of a branched cyclic hydrocarbon affects the packing and, hence, the density, exhibited by that compound. Reported here are density data for branched cyclohexane (C6) compounds including methylcyclohexane, ethylcyclohexane (ethylcC6), cis-1,2-dimethylcyclohexane (cis-1,2), cis-1,4-dimethylcyclohexane (cis-1,4), and trans-1,4-dimethylcyclohexane (trans-1,4) determined at temperatures up to 525 K and pressures up to 275 MPa. Of the four branched C6 isomers, cis-1,2 exhibits the largest densities and the smallest densities are exhibited by trans-1,4. The densities are modeled with the Peng-Robinson (PR) equation of state (EoS), the high-temperature, high-pressure, volume-translated (HTHP VT) PREoS, and the perturbed chain, statistical associating fluid theory (PC-SAFT) EoS. Model calculations highlight the capability of these equations to account for the different densities observed for the four isomers investigated in this study. The HTHP VT-PREoS provides modest improvements over the PREoS, but neither cubic EoS is capable of accounting for the effect of isomer structural differences on the observed densities. The PC-SAFT EoS, with pure component parameters from the literature or from a group contribution method, provides improved density predictions relative to those obtained with the PREoS or HTHP VT-PREoS. However, the PC-SAFT EoS, with either set of parameters, also cannot fully account for the effect of the C6 isomer structure on the resultant density.

Amphiphiles for supercritical CO2.

A semi-fluorinated hybrid amphiphile, pentadecafluoro-5-dodecyl (F7H4) sulfate, has been shown to form reversed micelles in dense CO(2); the aggregates evolve to form water-in-CO(2) (w/c) microemulsion droplets on addition of water. Aggregation structures in these w/c phases have been characterised by small-angle neutron scattering (SANS), showing the presence of cylindrical droplets, which change into dispersed lamellar phases at even higher water loadings. Other systems are also introduced, being high internal phase emulsions (HIPEs) with brine, and liquid and supercritical CO(2), stabilized by certain commercially available nonylphenol ethoxylates (Dow Tergitol NP-, and Huntsman Surfonic N- amphiphiles). These dispersions have been characterised by SANS for the first time. Quantitative analyses of the HIPEs SANS profiles show that they behave similarly to hydrocarbon-water emulsion analogues, with regard to total interfacial areas and the effects of amphiphile concentration on the underlying structures. Finally, the advantages and disadvantages of both approaches for controlling the physico-chemical properties of liquid/supercritical CO(2) in potential applications are compared and contrasted. These results highlight the importance of using specially designed CO(2)-philic amphiphiles for generating self-assembly structures in dense CO(2).

Aminosilicone solvents for CO(2) capture.

This work describes the first report of the use of an aminosilicone solvent mix for the capture of CO(2). To maintain a liquid state, a hydroxyether co-solvent was employed which allowed enhanced physisorption of CO(2) in the solvent mixture. Regeneration of the capture solvent system was demonstrated over 6 cycles and absorption isotherms indicate a 25-50 % increase in dynamic CO(2) capacity over 30 % MEA. In addition, proof of concept for continuous CO(2) absorption was verified. Additionally, modeling to predict heats of reaction of aminosilicone solvents with CO(2) was in good agreement with experimental results.

Design and evaluation of nonfluorous CO2-soluble oligomers and polymers.

Ab initio molecular modeling is used to design nonfluorous polymers that are potentially soluble in liquid CO2. We have used calculations to design three nonfluorous compounds meant to model the monomeric repeat units of polymers that exhibit multiple favorable binding sites for CO2. These compounds are methoxy isopropyl acetate, 2-methoxy ethoxy-propane, and 2-methoxy methoxy-propane. We have synthesized oligomers or polymers based on these small compounds and have tested their solubility in CO2. All three of these exhibit appreciable solubility in CO2. At 25 degrees C, oligo(3-acetoxy oxetane)6 is 5 wt % soluble at 25 MPa, the random copolymer (vinyl methoxymethyl ether30-co-vinyl acetate9) is 5 wt % soluble at 70 MPa and random copolymer (vinyl 1-methoxyethyl ether30-co-vinyl acetate9) is 3 wt % soluble at 120 MPa. These oligomers and polymers represent new additions to the very short list of nonfluorous CO2-soluble polymers. However, none of these are more soluble than poly(vinyl acetate), which exhibits the highest CO2 solubility of any known polymer containing only the elements C, H, and O.

Oxygenated hydrocarbon ionic surfactants exhibit CO2 solubility.

Several oxygenated hydrocarbons, including acetylated sugars, poly(propylene glycol), and oligo(vinyl acetate), have been used to generate CO2-soluble ionic surfactants. Surfactants with vinyl acetate tails yielded the most promising results, exhibiting levels of CO2 solubility comparable to those associated with fluorinated ionic surfactants. For example, a sodium sulfate with single, oligomeric vinyl acetate (VAc) tails consisting of 10 VAc repeat units was 7 wt % soluble in CO2 at 25 degrees C and 48 MPa. Upon introduction of water to these systems, only surfactants with the oligomeric vinyl acetate tails exhibited spectroscopic evidence of a polar environment that was capable of solubilizing the methyl orange into the CO2-rich phase. For example, a single-phase solution of CO2, 0.15 wt % sodium bis(vinyl acetate)8 sulfosuccinate, and water, at water loading (W) values ranging from 10 to 40 at 25 degrees C and 34.5 MPa, exhibited a methyl orange peak at 423 nm. This result indicated that the core of a reverse micelle provided a microenvironment with a polarity similar to that of methanol. Quantum chemical calculations indicate that the acetylated sugars may be too hydrophilic to readily form reverse micelles, whereas the VAc-based surfactants appear to have the correct balance of hydrophilic and hydrophobic forces necessary to form reverse micelles.