Towards Sustainable Materials: A Review of Acylhydrazone Chemistry for Reversible Polymers.

Transitioning towards a circular economy, extensive research has focused on dynamic covalent bonds (DCBs) to pave the way for more sustainable materials. These bonds enable debonding and rebonding on demand, as well as facilitating end-of-life recycling. Acylhydrazone/hydrazone chemistry offers a material with high stability under neutral and basic conditions making it a promising candidate for materials research, though the material is susceptible to acid degradation. However, this degradation under acidic conditions can be exploited, making it widely applicable in self-healing and biomedical fields, with potential for reprocessing and recycling. This review highlights studies exploring the reversibility of acylhydrazone/hydrazone bonds in various polymers, altering their properties, and utilizing them in applications such as self-healing, reprocessing, and recycling. The review also focuses on how the mechanical properties are affected by the presence of dynamic linkages, and methods to improve the mechanical performance.

Using Nitroxides to Enhance Carbon Fiber Interfacial Adhesion and as an Anchor for "Graft to" Surface Modification Strategies.

Nitroxide groups covalently grafted to carbon fibers are used as anchoring sites for TEMPO-terminated polymers (poly-n-butylacrylate and polystyrene) in a "graft to" surface modification strategy. All surface-modified fibers are evaluated for their physical properties, showing that several treatments have enhanced the tensile strength and Young's modulus compared to the control fibers. Up to an 18% increase in tensile strength and 12% in Young's modulus are observed. Similarly, the evaluation of interfacial shear strength in an epoxy polymer shows improvements of up to 144% relative to the control sample. Interestingly, the polymer-grafted surfaces show smaller increases in interfacial shear strength compared to surfaces modified with a small molecule only. This counterintuitive result is attributed to the incompatibility, both chemical and physical, of the grafted polymers to the surrounding epoxy matrix. Molecular dynamics simulations of the interface suggest that the diminished increase in mechanical shear strength observed for the polymer grafted surfaces may be due to the lack of exposed chain ends, whereas the small molecule grafted interface exclusively presents chain ends to the resin interface, resulting in good improvements in mechanical properties.

Examining the Role of Aryldiazonium Salts in Surface Electroinitiated Polymerization.

Historically, the irreversible reduction of aryldiazonium salts has provided a reliable method to modify surfaces, demonstrating a catalogue of suitable diazonium salts for targeted applications. This work expands the knowledge of diazonium salt chemistry to participate in surface electroinitiated emulsion polymerization (SEEP). The influence of concentration, electronic effects, and steric hindrance/regiochemistry of the diazonium salt initiator on the production of polymeric films is examined. The objective of this work is to determine if a polymer film can be tailored, controlling the thickness, density, and surface homogeneity using specific diazonium chemistry. The data presented herein demonstrate a significant difference in polymer films that can be achieved when selecting a variety of diazonium salts and vinylic monomers. A clear trend aligns with the electron-rich diazonium salt substitution providing the thickest films (up to 70.9 ± 17.8 nm) with increasing diazonium concentration and electron-withdrawing substitution achieving optimal homogeneity for the surface of the film at a 5 mM diazonium concentration.

Expanding the Scope of Surface Grafted Polymers Using Electroinitiated Polymerization.

The ability to rapidly modify the surface of materials is a powerful means of tailoring interfaces and interphases for a variety of applications. In this work, we demonstrate the extensive scope of an electrochemically mediated surface modification technique, able to install a range of surface grafted polymers of varying polarity and functionality. The irreversible reduction of aryldiazonium salts initiates polymer growth and provides a "priming layer" for the polymers to attach to, covalently anchoring them to the surface. We show the broad applicability of this technique through polymerization of 19 acrylate monomers, as well as a noncarbonyl bearing monomer species, styrene. Surface bound films were characterized using FT-IR, ellipsometry, and water contact angle.

Copper Ionophores as Novel Antiobesity Therapeutics.

The therapeutic utility of the copper ionophore disulfiram was investigated in a diet-induced obesity mouse model (C57BL/6J background), both through administration in feed (0.05 to 1% (w/w)) and via oral gavage (150 mg/kg) for up to eight weeks. Mice were monitored for body weight, fat deposition (perigonadal fat pads), metabolic changes (e.g., glucose dyshomeostasis) and pathologies (e.g., hepatic steatosis, hyperglycaemia and hypertriglyceridemia) associated with a high-fat diet. Metal-related pharmacological effects across major organs and serums were investigated using inductively coupled plasma mass spectrometry (ICP-MS). Disulfiram treatments (all modes) augmented hepatic copper in mice, markedly moderated body weight and abolished the deleterious systemic changes associated with a high-fat diet. Likewise, another chemically distinct copper ionophore H2(gtsm), administered daily (oral gavage), also augmented hepatic copper and moderated mouse body weight. Postmortem histological examinations of the liver and other major organs, together with serum aminotransferases, supported the reported therapeutic safety of disulfiram. Disulfiram specifically altered systemic copper in mice and altered hepatic copper metabolism, perturbing the incorporation of copper into ceruloplasmin (holo-ceruloplasmin biosynthesis) and subsequently reducing serum copper concentrations. Serum ceruloplasmin represents a biomarker for disulfiram activity. Our results establish copper ionophores as a potential class of antiobesity agents.

Comparison of solvate ionic liquids and DMSO as an in vivo delivery and storage media for small molecular therapeutics.

BACKGROUND: Solvate ionic liquids (SILs) are a new class of ionic liquids that are equimolar solutions of lithium bistrifluoromethanesulfonimide in either triglyme or tetraglyme, referred to as G3LiTFSA and G4LiTFSA, respectively. SILs play a role in energy storage lithium batteries, and have been proposed as potential alternatives to traditional organic solvents such as DMSO. G3TFSA and G4TFSA have been shown to exhibit no toxicity in vivo up to 0.5% (v/v), and solubilize small compounds (N,N-diethylaminobenzaldehyde) with full penetrance, similar to DMSO delivered DEAB. Herein, we compare the effects of storage (either at room temperature or - 20 °C) on DEAB solubilized in either DMSO, G3TFSA or G4TFSA to investigate compound degradation and efficacy. RESULTS: The findings show that DEAB stored at room temperature (RT) for 4 months solubilized in either G3TFSA, G4TFSA or DMSO displayed no loss of penetrance. The same was observed with stock solutions stored at - 20 °C for 4 months; however G4TFSA remained in a liquid state compared to both G3TFSA and DMSO. Moreover, we examined the ability of G3TFSA and G4TFSA to solubilize another small molecular therapeutic, the FGFR antagonist SU5402. G4TFSA, unlike G3TFSA solubilized SU5402 and displayed similar phenotypic characteristics and reduced dlx2a expression as reported and shown with SU5402 in DMSO; albeit more penetrative. CONCLUSION: This study validates the use of these ionic liquids as a potential replacement for DMSO in vivo as organic solubilizing agents.

Modification of Carbon Fibre Surfaces by Sulfur-Fluoride Exchange Click Chemistry.

Technologies that enable surface modification are in high demand and are critical for the implementation of new functional materials and devices. Here, we describe the first modification of a carbon surface (in this case carbon fiber) using the sulfur-fluoride exchange (SuFEx) reaction. The parent sulfur (VI) fluoride moiety can be installed directly to the surface via electrochemical deposition of the fluorosulfate phenyldiazonium tetrafluoroborate salt, or by 'SuFExing' a phenol on the carbon surface followed by treatment of the material with SO2 F2 ; similar to a 'graft to' or 'graft from' functionalization approach. We demonstrate that these SuFEx-able surfaces readily undergo exchange with aryl silyl ethers, and that the subsequent sulfate linkages are themselves stable under electrochemical redox conditions. Finally, we showcase the utility of the SuFEx chemistry by installing a pendant amino group to the fiber surface resulting in interfacial shear strength improvements of up to 130 % in epoxy resin.

Correction: Determination of Kamlet-Taft parameters for selected solvate ionic liquids.

Correction for 'Determination of Kamlet-Taft parameters for selected solvate ionic liquids' by Daniel J. Eyckens et al., Phys. Chem. Chem. Phys., 2016, 18, 13153-13157.

Determination of Kamlet-Taft parameters for selected solvate ionic liquids.

The normalised polarity E and Kamlet-Taft parameters of recently described solvate ionic liquids, composed of lithium bis(trifluoromethyl)sulfonimide (LiTFSI) in tri- () or tetraglyme () have been determined and compared to the parent glyme ( and ). We show that these solvate ionic liquids have a high polarity (, (E) = 1.03; , (E) = 1.03) and display very high electron pair accepting characteristics (, α = 1.32; , α = 1.35). Molecular dynamics simulations suggest that the chelated lithium cation is responsible for this observation. The relatively small hydrogen bond acceptor (ß) values for these systems (, ß = 0.41; , ß = 0.37) are thought to be due primarily to the TFSI anion, which is supplemented slightly by the glyme oxygen atom. In addition, these solvate ionic liquids are found to have a high polarisability (, π* = 0.94; , π* = 0.90).

Piercing of the Human Parainfluenza Virus by Nanostructured Surfaces.

This paper presents a comprehensive experimental and theoretical investigation into the antiviral properties of nanostructured surfaces and explains the underlying virucidal mechanism. We used reactive ion etching to fabricate silicon (Si) surfaces featuring an array of sharp nanospikes with an approximate tip diameter of 2 nm and a height of 290 nm. The nanospike surfaces exhibited a 1.5 log reduction in infectivity of human parainfluenza virus type 3 (hPIV-3) after 6 h, a substantially enhanced efficiency, compared to that of smooth Si. Theoretical modeling of the virus-nanospike interactions determined the virucidal action of the nanostructured substrata to be associated with the ability of the sharp nanofeatures to effectively penetrate the viral envelope, resulting in the loss of viral infectivity. Our research highlights the significance of the potential application of nanostructured surfaces in combating the spread of viruses and bacteria. Notably, our study provides valuable insights into the design and optimization of antiviral surfaces with a particular emphasis on the crucial role played by sharp nanofeatures in maximizing their effectiveness.

Carbon fibre surface modification facilitated by silver-catalysed radical decarboxylation.

A silver catalysed radical decarboxylation process was used to graft a copolymer (4 : 1; methylacrylate/acrylic acid) onto short carbon fibres. Surface grafting was confirmed by XPS, SEM and TGA, suggesting that the polymer accounted for 10% of the modified materials mass. Incorporation of these surface enhanced carbon fibres into an epoxy resin gave composites demonstrating an increase in ductility and a clear change in failure mode from adhesive, at the fibre-matrix interface, to cohesive, within the matrix polymer itself.

α-Aminophosphonate Derivatives for Enhanced Flame Retardant Properties in Epoxy Resin.

This work demonstrates the introduction of various α-aminophosphonate compounds to an epoxy resin system, thereby improving flame retardance properties. The α-aminophosphonate scaffold allows for covalent incorporation (via the secondary amine) of the compounds into the polymer network. This work explores the synergistic effect of phosphorus and halogens (such as fluorine) to improve flame retardancy. The compounds were all prepared and isolated in analytical purity and in good yield (95%). Epoxy samples were prepared, individually incorporating each compound. Thermogravimetric analysis showed an increased char yield, indicating an improved thermal resistance (with respect to the control sample). Limiting oxygen index for the control polymer was 28.0% ± 0.31% and it increased to 34.6% ± 0.33% for the fluorinated derivative.

Using In Situ Polymerization to Increase Puncture Resistance and Induce Reversible Formability in Silk Membranes.

Silk fibroin is an excellent biopolymer for application in a variety of areas, such as textiles, medicine, composites and as a novel material for additive manufacturing. In this work, silk membranes were surface modified by in situ polymerization of aqueous acrylic acid, initiated by the reduction of various aryldiazonium salts with vitamin C. Treatment times of 20 min gave membranes which possessed increased tensile strength, tensile modulus, and showed significant increased resistance to needle puncture (+131%), relative to 'untreated' standards. Most interestingly, the treated silk membranes were able to be reversibly formed into various shapes via the hydration and plasticizing of the surface bound poly(acrylic acid), by simply steaming the modified membranes. These membranes and their unique properties have potential applications in advanced textiles, and as medical materials.

A Review of Solvate Ionic Liquids: Physical Parameters and Synthetic Applications.

Solvate Ionic Liquids (SILs) are a relatively new class of ionic liquids consisting of a coordinating solvent and salt, that give rise to a chelate complex with very similar properties to ionic liquids. Herein is the exploration of the reported Kamlet-Taft parameters, Gutmann Acceptor numbers and the investigation of chelating effects through NMR spectroscopy of multiple atomic nuclei. These properties are related to the application of SILs as reaction media for organic reactions. This area is also reviewed here, including the implication in catalysis for the Aldol and Kabachnik-Fields reactions and electrocyclization reactions such as Diels-Alder and [2+2] cycloaddition. Solvate ILs exhibit many interesting properties and hold great potential as a solvent for organic transformations.

Colour tuning and enhancement of gel-based electrochemiluminescence devices utilising Ru(ii) and Ir(iii) complexes.

Combining luminophores in ratios that compensate for energy transfer provides a readily selectable range of new emission colours for gel-based electrochemiluminescence devices (ECLDs). A novel blue ECLD luminophore is also introduced and shown to enhance the intensity of the conventional green emitter through a mixed annihilation ECL mechanism. Peak-to-peak voltages were minimised using asymmetric potential pulse sequences, which increased the longevity of the ECLD emission.

Fiber with Butterfly Wings: Creating Colored Carbon Fibers with Increased Strength, Adhesion, and Reversible Malleability.

Colored and color-changing materials are central to perception and interaction in nature and have been exploited in an array of modern technologies such as sensors, visual displays, and smart materials. Attempts to introduce color into carbon fiber materials have been limited by deleterious impacts on fiber properties, and the extension of colored fibers toward "smart composites" remains in its infancy. We present carbon fibers incorporating structural color, similar to that observed on the surface of soap bubbles and various insects and birds, by modifying the fiber surface through in situ polymerization grafting. When dry, the treated fibers exhibit a striking blue color, but when exposed to a volatile solvent, a cascade of colors across the visible light region is observed as the film first swells and then shrinks as the solvent evaporates. The treated fibers not only possess a unique color and color-changing ability but also can be reversibly formed into complex shapes and bear significant loads even without being encased in a supporting polymer. The tensile strength of treated fibers shows a statistically significant increase (+12%), and evaluation of the fiber-to-matrix adhesion of these polymers to an epoxy resin shows more than 300% improvement over control fibers. This approach creates a new platform for the multifaceted advance of smart composites.

Effect of Tow Size and Interface Interaction on Interfacial Shear Strength Determined by Iosipescu (V-Notch) Testing in Epoxy Resin.

Testing methodologies to accurately quantify interfacial shear strength (IFSS) are essential in order to understand fiber-matrix adhesion. While testing methods at a microscale (single filament fragmentation test-SFFT) and macroscale (Short Beam Shear-SBS) are wide spread, each have their own shortcomings. The Iosipescu (V-notch) tow test offers a mesoscale bridge between the microscale and macroscale whilst providing simple, accurate results with minimal time investment. However, the lack of investigations exploring testing variables has limited the application of Iosipescu testing to only a handful of studies. This paper assesses the effect of carbon fiber tow size within the Iosipescu tow test for epoxy resin. Tow sizes of 3, 6, and 9 k are eminently suitable, while more caution must be shown when examining 12, and 15 k tows. In this work, tows at 18 and 24 k demonstrated failure modes not derived from interfacial failure, but poor fiber wetting. A catalogue of common fracture geometries is discussed as a function of performance for the benefit of future researchers. Finally, a comparison of commercial (T300), amine (T300-Amine), and ethyl ester (T300-Ester) surface modified carbon fibers was conducted. The outcomes of this study showed that the Iosipescu tow test is inherently less sensitive in distinguishing between similar IFSS but provides a more 'real world' image of the carbon fiber-epoxy interface in a composite material.