RESUMO
Here, we report the synthesis of BCN-93, a meltable, functionalized, and permanently porous metal-organic polyhedron (MOP) and its subsequent transformation into amorphous or crystalline, shaped, self-standing, transparent porous films via melting and subsequent cooling. The synthesis entails the outer functionalization of a MOP with meltable polymer chains: in our model case, we functionalized a Rh(II)-based cuboctahedral MOP with poly(ethylene glycol). Finally, we demonstrate that once melted, BCN-93 can serve as a porous matrix into which other materials or molecules can be dispersed to form mixed-matrix composites. To illustrate this, we combined BCN-93 with one of various additives (either two MOF crystals, a porous cage, or a linear polymer) to generate a series of mixed-matrix films, each of which exhibited greater CO2 uptake relative to the parent film.
RESUMO
The surface chemistry of Metal-Organic Polyhedra (MOPs) is crucial to their physicochemical properties because it governs how they interact with external substances such as solvents, synthetic organic molecules, metal ions, and even biomolecules. Consequently, the advancement of synthetic methods that facilitate the incorporation of diverse functional groups onto MOP surfaces will significantly broaden the range of properties and potential applications for MOPs. This study describes the use of copper(I)-catalysed, azide-alkyne cycloaddition (CuAAC) click reactions to post-synthetically modify the surface of alkyne-functionalised cuboctahedral MOPs. To this end, a novel Rh(II)-based MOP with 24 available surface alkyne groups was synthesised. Each of the 24 alkyne groups on the surface of the "clickable" Rh-MOP can react with azide-containing molecules at room temperature, without compromising the integrity of the MOP. The wide substrate catalogue and orthogonal nature of CuAAC click chemistry was exploited to densely functionalise MOPs with diverse functional groups, including polymers, carboxylic and phosphonic acids, and even biotin moieties, which retained their recognition capabilities once anchored onto the surface of the MOP.
RESUMO
Experimental results show that the presence of a concentration gradient of certain nano-ions (most notably cobaltabisdicarbollide ([o-COSAN]- anions), induce a current across intact artificial phospholipid bilayers in spite of the high Born free energy estimated for these ions. The mechanism underlying this observed translocation of nano-anions across membranes has yet to be determined. Here we show, using molecular dynamics simulations, that the permeation of [o-COSAN]- anions across a lipid bilayer proceeds in a cooperative manner. Single nano-ions can enter the bilayer but permeation is hampered by a free energy barrier of about 8kBT. The interaction between these nano-ions inside a leaflet induces a flip-flop translocation mechanism with the formation of transient, elongated structure inside the membrane. This cooperative flip-flop allows an efficient distribution of [o-COSAN]- anions in both leaflets of the bilayer. These results suggest the existence of a new mechanism for permeation of nano-ions across lipid membranes, relevant for those that have the appropriate self-assembly character.
Assuntos
Bicamadas Lipídicas , Fosfolipídeos , Bicamadas Lipídicas/química , Fosfolipídeos/química , Simulação de Dinâmica Molecular , Ânions/químicaRESUMO
Surfactants are commonly used as disinfection agents in personal care products against bacteria and viruses, including SARS-CoV-2. However, there is a lack of understanding of the molecular mechanisms of the inactivation of viruses by surfactants. Here, we employ coarse grain (CG) and all-atom (AA) molecular dynamics simulations to investigate the interaction between general families of surfactants and the SARS-CoV-2 virus. To this end, we considered a CG model of a full virion. Overall, we found that surfactants have only a small impact on the virus envelope, being inserted into the envelope without dissolving it or generating pores, at the conditions considered here. However, we found that surfactants may induce a deep impact on the spike protein of the virus (responsible for its infectivity), easily covering it and inducing its collapse over the envelope surface of the virus. AA simulations confirmed that both negatively and positively charged surfactants are able to extensively adsorb over the spike protein and get inserted into the virus envelope. Our results suggest that the best strategy for the design of surfactants as virucidal agents will be to focus on those strongly interacting with the spike protein.
Assuntos
COVID-19 , SARS-CoV-2 , Humanos , SARS-CoV-2/fisiologia , Simulação de Dinâmica Molecular , Glicoproteína da Espícula de Coronavírus/metabolismo , Ligação ProteicaRESUMO
Metal-organic frameworks (MOFs) assembled from multiple building blocks exhibit greater chemical complexity and superior functionality in practical applications. Herein, we report a new approach based on using prefabricated cavities to design isoreticular multicomponent MOFs from a known parent MOF. We demonstrate this concept with the formation of multicomponent HKUST-1 analogues, using a prefabricated cavity that comprises a cuboctahedral Rh(II) metal-organic polyhedron functionalized with 24 carboxylic acid groups. The cavities are reticulated in three dimensions via Cu(II)-paddlewheel clusters and (functionalized) 1,3,5-benzenetricarboxylate linkers to form three- and four-component HKUST-1 analogues.
RESUMO
A prominent feature of the SARS-CoV-2 virus is the presence of a large glycoprotein spike protruding from the virus envelope. The spike determines the interaction of the virus with the environment and the host. Here, we used an all-atom molecular dynamics simulation method to investigate the interaction of up- and down-conformations of the S1 subunit of the SARS-CoV-2 spike with the (100) surface of Au, Ag, and Cu. Our results revealed that the spike protein is adsorbed onto the surface of these metals, with Cu being the metal with the highest interaction with the spike. In our simulations, we considered the spike protein in both its up-conformation Sup (one receptor binding domain exposed) and down-conformation Sdown (no exposed receptor binding domain). We found that the affinity of the metals for the up-conformation was higher than their affinity for the down-conformation. The structural changes in the spike in the up-conformation were also larger than the changes in the down-conformation. Comparing the present results for metals with those obtained in our previous MD simulations of Sup with other materials (cellulose, graphite, and human skin models), we see that Au induces the highest structural change in Sup, larger than those obtained in our previous studies.
Assuntos
COVID-19 , Glicoproteína da Espícula de Coronavírus , Humanos , Glicoproteína da Espícula de Coronavírus/metabolismo , SARS-CoV-2 , Ligação Proteica , Simulação de Dinâmica MolecularRESUMO
A prominent feature of coronaviruses is the presence of a large glycoprotein spike (S) protruding from the viral particle. The specific interactions of a material with S determine key aspects such as its possible role for indirect transmission or its suitability as a virucidal material. Here, we consider all-atom molecular dynamics simulations of the interaction between a polymer surface (polystyrene) and S in its up and down conformations. Polystyrene is a commonly used plastic found in electronics, toys, and many other common objects. Also, previous atomic force microscopy (AFM) experiments showed substantial adhesion of S over polystyrene, stronger than in other common materials. Our results show that the main driving forces for the adsorption of the S protein over polystyrene were hydrophobic and π-π interactions with S amino acids and glycans. The interaction was stronger for the case of S in the up conformation, which exposes one highly flexible receptor binding domain (RBD) that adjusts its conformation to interact with the polymer surface. In this case, the interaction has similar contributions from the RBD and glycans. In the case of S in the down conformation, the interaction with the polystyrene surface was weaker and it was dominated by glycans located near the RBD. We do not find significant structural changes in the conformation of S, a result which is in deep contrast to our previous results with another hydrophobic surface (graphite). Our results suggest that SARS-CoV-2 virions may adsorb strongly over plastic surfaces without significantly affecting their infectivity.
Assuntos
COVID-19 , Glicoproteína da Espícula de Coronavírus , Adsorção , Enzima de Conversão de Angiotensina 2 , Humanos , Simulação de Dinâmica Molecular , Polissacarídeos , Poliestirenos/metabolismo , Ligação Proteica , SARS-CoV-2 , Glicoproteína da Espícula de Coronavírus/metabolismoRESUMO
The possibility of contamination of human skin by infectious virions plays an important role in indirect transmission of respiratory viruses but little is known about the fundamental physico-chemical aspects of the virus-skin interactions. In the case of coronaviruses, the interaction with surfaces (including the skin surface) is mediated by their large glycoprotein spikes that protrude from (and cover) the viral envelope. Here, we perform all atomic simulations between the SARS-CoV-2 spike glycoprotein and human skin models. We consider an "oily" skin covered by sebum and a "clean" skin exposing the stratum corneum. The simulations show that the spike tries to maximize the contacts with stratum corneum lipids, particularly ceramides, with substantial hydrogen bonding. In the case of "oily" skin, the spike is able to retain its structure, orientation and hydration over sebum with little interaction with sebum components. Comparison of these results with our previous simulations of the interaction of SARS-CoV-2 spike with hydrophilic and hydrophobic solid surfaces, suggests that the "soft" or "hard" nature of the surface plays an essential role in the interaction of the spike protein with materials.
Assuntos
Ligação Proteica , Pele/virologia , Glicoproteína da Espícula de Coronavírus , COVID-19 , Humanos , Interações Hidrofóbicas e Hidrofílicas , Simulação de Dinâmica Molecular , SARS-CoV-2 , Glicoproteína da Espícula de Coronavírus/metabolismoRESUMO
The physicochemical similarity of isomers makes their chemical separation through conventional techniques energy intensive. Herein, we report that, instead of using traditional encapsulation-driven processes, steric hindrance in metal coordination on the outer surface of RhII -based metal-organic polyhedra (Rh-MOPs) can be used to separate pyridine-based regioisomers via liquid-liquid extraction. Through molecular dynamics simulations and wet experiments, we discovered that the capacity of pyridines to coordinatively bind to Rh-MOPs is determined by the positions of the pyridine substituents relative to the pyridine nitrogen and is influenced by steric hindrance. Thus, we exploited the differential solubility of bound and non-bound pyridine regioisomers to engineer liquid-liquid self-sorting systems. As a proof of concept, we separated four different equimolecular mixtures of regioisomers, including a mixture of the industrially relevant compounds 2-chloropyridine and 3-chloropyridine, isolating highly pure compounds in all cases.
RESUMO
The migration process of magnetic nanoparticles and colloids in solution under the influence of magnetic field gradients, which is also known as magnetophoresis, is an essential step in the separation technology used in various biomedical and engineering applications. Many works have demonstrated that in specific situations, separation can be performed easily with the weak magnetic field gradients created by permanent magnets, a process known as low-gradient magnetic separation (LGMS). Due to the level of complexity involved, it is not possible to understand the observed kinetics of LGMS within the classical view of magnetophoresis. Our experimental and theoretical investigations in the last years unravelled the existence of two novel physical effects that speed up the magnetophoresis kinetics and explain the observed feasibility of LGMS. Those two effects are (i) cooperative magnetophoresis (due to the cooperative motion of strongly interacting particles) and (ii) magnetophoresis-induced convection (fluid dynamics instability originating from inhomogeneous magnetic gradients). In this feature article, we present a unified view of magnetophoresis based on the extensive research done on these effects. We present the physical basis of each effect and also propose a classification of magnetophoresis into four distinct regimes. This classification is based on the range of values of two dimensionless quantities, namely, aggregation parameter N* and magnetic Grashof number Grm, which include all of the dependency of LGMS on various physical parameters (such as particle properties, thermodynamic parameters, fluid properties, and magnetic field properties). This analysis provides a holistic view of the classification of transport mechanisms in LGMS, which could be particularly useful in the design of magnetic separators for engineering applications.
RESUMO
Cobaltabisdicarbollide (COSAN) anions have an unexpectedly rich self-assembly behavior, which can lead to vesicles and micelles without having a classical surfactant molecular architecture. This was rationalized by the introduction of new terminology and novel driving forces. A key aspect in the interpretation of COSAN behavior is the assumption that the most stable form of these ions is the transoid rotamer, which lacks a "hydrophilic head" and a "hydrophobic tail". Using implicit solvent DFT calculations and MD simulations we show that in water, 1)â the cisoid rotamer is the most stable form of COSAN and 2)â this cisoid rotamer has a well-defined hydrophilic polar region ("head") and a hydrophobic apolar region ("tail"). In addition, our simulations show that the properties of this rotamer in water (interfacial affinity, micellization) match those expected for a classical surfactant. Therefore, we conclude that the experimental results for the COSAN ions can now be understood in terms of its amphiphilic molecular architecture.
RESUMO
Ligand-to-surface interactions are critical factors in surface and interface chemistry to control the mechanisms governing nanostructured colloidal suspensions. In particular, molecules containing carboxylate moieties (such as citrate anions) have been extensively investigated to stabilize metal, metal oxide, and metal fluoride nanoparticles. Using YF3 nanoparticles as a model system, we show here the self-assembly of citrate-stabilized nanostructures (supraparticles) with a size tunable by temperature. Results from several experimental techniques and molecular dynamics simulations show that the self-assembly of nanoparticles into supraparticles is due to ionic bridges between different nanoparticles. These interactions were caused by cations (e.g., ammonium) strongly adsorbed onto the nanoparticle surface that also interact strongly with nonbonded citrate anions, creating ionic bridges in solution between nanoparticles. Experimentally, we observe self-assembly of nanoparticles into supraparticles at 25 and 100 °C. Interestingly, at high temperatures (100 °C), this citrate-bridge self-assembly mechanism is more efficient, giving rise to larger supraparticles. At low temperatures (5 °C), this mechanism is not observed, and nanoparticles remain stable. Molecular dynamics simulations show that the free energy of a single citrate bridge between nanoparticles in solution is much larger than the thermal energy and in fact is much larger than typical adsorption free energies of ions on colloids. Summarizing our experiments and simulations, we identify as key aspects of the self-assembly mechanism the requirement of NPs with a surface able to adsorb anions and cations and the presence of multidentate ions in solution. This indicates that this new ion-mediated self-assembly mechanism is not specific of YF3 and citrate anions, as supported by preliminary experimental results in other systems.
RESUMO
A new kind of fluorescent organic nanoparticles (FONs) is obtained using quatsomes (QSs), a family of nanovesicles proposed as scaffolds for the nanostructuration of commercial lipophilic carbocyanines (1,1'-dioctadecyl-3,3,3',3'-tetramethyl-indocarbocyanine perchlorate (DiI), 1,1'-dioctadecyl-3,3,3',3'-tetramethyl-indodicarbocyanine perchlorate (DiD), and 1,1'-dioctadecyl-3,3,3',3'-tetramethyl-indotricarbocyanine iodide (DiR)) in aqueous media. The obtained FONs, prepared by a CO2 -based technology, show excellent colloidal- and photostability, outperforming other nanoformulations of the dyes, and improve the optical properties of the fluorophores in water. Molecular dynamics simulations provide an atomistic picture of the disposition of the dyes within the membrane. The potential of QSs for biological imaging is demonstrated by performing superresolution microscopy of the DiI-loaded vesicles in vitro and in cells. Therefore, fluorescent QSs constitute an appealing nanomaterial for bioimaging applications.
Assuntos
Nanopartículas/química , Nanoestruturas/química , Água/química , Simulação de Dinâmica MolecularRESUMO
Here, 15 LnF3 nanocrystals are synthesized using coprecipitation method with citrate stabilization to allow the fast, easy, and reproducible synthesis of several nanoscaled structures in water. General trends related to the behavior of LnF3 nanocrystals are highlighted due to their broad range of application in several fields (e.g., medical applications). The same nature for all Ln3+ cations is expected due to the internal role of f orbitals. However, we found that the use of different lanthanide elements is crucial in the final size, shape, assembly, and crystalline structure. In addition, the decrease of the cation size of the lanthanide series changes the behavior of these compounds, resulting in hexagonal, orthorhombic, and cubic crystalline structures. In addition, we are able to tune the cubic crystalline phase to pure orthorhombic by modifying the pH of the system using HBF4 instead of tetramethylammonium citrate. Via 11B NMR, we demonstrated the mechanism of HBF4 as fluorinating agent if an additional source of F- is not added during the synthesis. 1H NMR and IR techniques were performed to unravel the picture of the surface chemistry of the two representative metal cations (Y and La). Finally, HRTEM and SAED were performed to uncover the shape of the obtained nanocrystals and the preferential orientation of the assembled particles, giving crucial information on the involved mechanisms. This study reveals not only the dependence of the crystalline structure on the used metal and pH but also ability to achieve LnF3 assembled particles depending on the final shape and temperature.
RESUMO
We have studied the effect of different ions belonging to the extended Hofmeister series on the thermosensitive polymer poly(N-isopropylacrylamide) (PNIPAM), by combining Differential Scanning Calorimetry (DSC) and Dynamic Light Scattering (DLS). The variations in the lower critical solution temperature (TLCS) and enthalpy change during PNIPAM phase separation evidence the importance of considering both hydration and hydrophobicity to explain the interaction of ions with interfaces. The results obtained in the presence of inorganic ions can be explained by the tendency of water molecules to preferentially hydrate the PNIPAM chains or the ions, depending on the kosmotropic (highly hydrated) or chaotropic (poorly hydrated) character of the ions. On the contrary, tetraphenyl organic ions (Ph4B- and Ph4As+) interact with the hydrophobic moieties of PNIPAM chains, inducing a significant reduction of the TLCS. DLS results show that the aggregation state of PNIPAM above the TLCS is also strongly influenced by the presence of ions. While macroscopic phase separation (formation of a polymer-rich phase insoluble in water) was apparent in the presence of inorganic ions, we observed the formation of submicron PNIPAM aggregates at temperatures above the TLCS in the presence of the hydrophobic ions. Kinetically arrested monodisperse PNIPAM nanoparticles were formed in the presence of the Ph4B- anion, while a rather polydisperse distribution of particle sizes was observed in the presence of Ph4As+. These results show that ionic specificity influences both the static (thermodynamic) and dynamic (kinetically controlled aggregation) states of PNIPAM in an aqueous environment.
RESUMO
In this work we study the behaviour at interfaces and the micelle self-assembly of a cationic surfactant (CTAB) by Molecular Dynamics (MD) simulations of coarse-grained models. We consider both the standard (with explicit water) Martini force field and the implicit solvent version of the Martini force field (Dry Martini). First, we study the behaviour of CTAB at a water/vacuum interface, at a water/organic solvent interface and in a pre-assembled CTAB micelle using both standard and Dry Martini and all-atomic simulations. Our results indicate that there are significant quantitative differences between the predictions of the two models. Interestingly, implicit solvent simulations with Dry Martini show good quantitative agreement with all-atomic MD simulations, better than explicit solvent Martini MD simulations. The computational efficiency of the Martini and Dry Martini models allowed us to study the self-assembly of CTAB in a large system with many micelles. We observe the self-assembly of CTAB into micelles and also the exchange of CTAB molecules between micelles by events such as micelle fusion and fission which are difficult to observe in all-atomic MD simulations due to the time and length scales involved. Under the studied conditions, both Martini models predict a rather different self-assembly behaviour. The standard Martini model predicts a final equilibrium state with spherical micelles with an average size of ≈70 CTAB molecules. In contrast, the Dry Martini model predicts the formation of large tubular micelles with ≈330 CTAB molecules. Compared with experiments, standard Martini and Dry Martini underestimate and overestimate, respectively, the micelle size.
RESUMO
A fast and single-step preparation of patchy LnF3 faceted-charge nanocrystals are described. These hexagonal faceted nanocrystals allow the spontaneous selective adsorption of cations or anions in the different faces, producing stable and well-defined patches of different charge. The mechanism for the formation of the patches and the properties of the obtained nanocrystals were characterized by a combination of experimental techniques and all-atomic molecular dynamics simulations. The spontaneous dual-charged surface as well as the luminescence effects that can be achieved by doping host-LaF3 systems make these new nanocrystals interesting both from a fundamental point of view and for a wide range of applications.
RESUMO
Fluorescent silicon (Si) nanocrystals (2.8 nm diameter) were incorporated into surfactant assemblies of cetyltrimethylammonium bromide (CTAB) and cholesterol, called quatsomes. In water, the quatsome-Si nanocrystal assemblies remain fluorescent and well-dispersed for weeks. In contrast to Si nanocrystals, alkanethiol-capped gold (Au) nanocrystals do not form stable dispersions in water with quatsomes. Cryogenic transmission electron microscopy (cryo-TEM) confirmed that the Si nanocrystal-quatsome structures do not change over the course of several weeks. The long-term stability of the Si nanocrystal-quatsome assemblies, their fluorescence, and biocompatibility makes them attractive candidates for medical applications.
RESUMO
In this study we have investigated how different proteins interact with big organic ions. Two ions that are similar in size and chemical structure (Ph4B- anion and Ph4As+ cation) were studied. The proteins chosen are the two major allergenic proteins of cow's milk, ß-lactoglobulin and ß-casein, and bovine serum albumin, BSA, as the reference protein. First, a quantitative study to determine the hydrophobic degree of the proteins was performed. Then, electrokinetic and stability measurements on protein-coated polystyrene (PS) microspheres as a function of the tetraphenyl ion concentration were carried out. Our results show that the affinity of the organic ions depends on the hydrophobicity of the interface. Big charge inversions and re-stabilization patterns were observed at very low concentrations of tetraphenyl ions for the most hydrophobic protein studied (with ß-casein). Besides, the ionic concentrations needed to destabilize these colloidal systems were roughly one order of magnitude lower for the anion than for the cation. In addition, we studied conformational changes of the adsorbed proteins with a quartz crystal microbalance. Proteins were adsorbed onto hydrophobic flat substrates and then exposed to the tetraphenyl ions. The protein films swelled or collapsed as a function of the accumulation of tetraphenyl ions. Similarly to the electrokinetic/stability studies, the ionic concentration necessary to trigger structural changes of the protein films was one order of magnitude larger for the cation than for the anion. All the results evidence that the accumulation of these organic ions on an interface depends directly on its degree of hydrophobicity. We attribute the different interactions of the anion and the cation with these interfaces to their dissimilar hydration, which makes the anion show a more hydrophobic behaviour than the cation.