Rhodium-Based Metal-Organic Polyhedra Assemblies for Selective CO2 Photoreduction.

Heterogenization of molecular catalysts via their immobilization within extended structures often results in a lowering of their catalytic properties due to a change in their coordination sphere. Metal-organic polyhedra (MOP) are an emerging class of well-defined hybrid compounds with a high number of accessible metal sites organized around an inner cavity, making them appealing candidates for catalytic applications. Here, we demonstrate a design strategy that enhances the catalytic properties of dirhodium paddlewheels heterogenized within MOP (Rh-MOP) and their three-dimensional assembled supramolecular structures, which proved to be very efficient catalysts for the selective photochemical reduction of carbon dioxide to formic acid. Surprisingly, the catalytic activity per Rh atom is higher in the supramolecular structures than in its molecular sub-unit Rh-MOP or in the Rh-metal-organic framework (Rh-MOF) and yields turnover frequencies of up to 60 h-1 and production rates of approx. 76 mmole formic acid per gram of the catalyst per hour, unprecedented in heterogeneous photocatalysis. The enhanced catalytic activity is investigated by X-ray photoelectron spectroscopy and electrochemical characterization, showing that self-assembly into supramolecular polymers increases the electron density on the active site, making the overall reaction thermodynamically more favorable. The catalyst can be recycled without loss of activity and with no change of its molecular structure as shown by pair distribution function analysis. These results demonstrate the high potential of MOP as catalysts for the photoreduction of CO2 and open a new perspective for the electronic design of discrete molecular architectures with accessible metal sites for the production of solar fuels.

Adsorber heat exchanger using Al-fumarate beads for heat-pump applications - a transport study.

Metal-Organic Frameworks (MOFs), thanks to their type V water adsorption isotherms ("S-Shape") and large water capacities, are considered as potential breakthrough adsorbents for heat-pump applications. In particular, Al(OH)-fumarate could enable efficient regeneration at a lower temperature than silica-gel which would allow us to address the conversion of waste heat at low temperature such as found in data centers. Despite its greater adsorption capacity features, heat and mass transport limitations could jeopardize the potential performance of Al(OH)-fumarate. Heat and mass transport depend on the size of the bodies (mm range), their packing and on the pore structures, i.e. macro-mesopore volumes and sizes. This paper describes the cost-efficient and scalable synthesis and shaping processes of Al(OH)-fumarate beads of various sizes appropriate for use in water Adsorption Heat-Pumps (AHPs). The objective was to study transport limitations (i.e. mass and heat) in practical e beads which meet mechanical stability requirements. Dynamic data at the grain scale was obtained by the Large Temperature Jump method while dynamic data at the adsorber scale was obtained on a heat exchanger filled with more than 1 kg of Al(OH)-fumarate beads. Whereas the binder content had little impact on mass and heat transfer in this study, we found that Knudsen diffusion in mesopores of the grain may be the main limiting factor at the grain scale. At the adsorber scale, heat-transfer within the bed packing as well as to the heat exchanger is likely responsible for the slow adsorption and desorption kinetics which have been observed for very low desorption temperature. Finally, the dynamic aspects of the observed water adsorption isotherm shift with temperature are discussed in light of reported reversible structure modification upon temperature triggered water adsorption-desorption.

Molecular Porous Photosystems Tailored for Long-Term Photocatalytic CO2 Reduction.

The molecular-level structuration of two full photosystems into conjugated porous organic polymers is reported. The strategy of heterogenization gives rise to photosystems which are still fully active after 4 days of continuous illumination. Those materials catalyze the carbon dioxide photoreduction driven by visible light to produce up to three grams of formate per gram of catalyst. The covalent tethering of the two active sites into a single framework is shown to play a key role in the visible light activation of the catalyst. The unprecedented long-term efficiency arises from an optimal photoinduced electron transfer from the light harvesting moiety to the catalytic site as anticipated by quantum mechanical calculations and evidenced by in situ ultrafast time-resolved spectroscopy.

Hydrogenation Size-Selective Pt/Hollow Beta Catalysts.

The aim of the present work is to synthesize a zeolite-based catalyst with a hollow morphology and highly dispersed metal nanoparticles (NPs) encapsulated inside the zeolite micropores. For this purpose, we have studied a treatment using tetraalkylammonium (TAA) bromides for the selective removal of a large Pt particle from the outer surface of a hollow Beta zeolite. TEM analysis reveals that we succeeded in the synthesis of a hollow beta zeolite single crystal with encapsulated particles, with a high dispersion of 50-60 %. The molecular-sieve-type mechanism of the obtained catalysts was evaluated in the model reaction of toluene and mesitylene catalytic hydrogenation. Thanks to the high dispersion. a 10-fold activity enhancement has been obtained with respect to hollow beta zeolites with encapsulated NPs recently described in the literature.

Sensitive Photoacoustic IR Spectroscopy for the Characterization of Amino/Azido Mixed-Linker Metal-Organic Frameworks.

Photoacoustic Fourier-transform infrared spectroscopy makes it possible to determine the organic composition of mixed-linker metal-organic frameworks. The sound produced upon IR irradiation enables the discrimination of azido and amino linkers in three different MOF platforms with a sensitivity that is two orders of magnitude higher than that achieved using classic IR analysis.

Breakthrough in Xenon Capture and Purification Using Adsorbent-Supported Silver Nanoparticles.

Rare gas capture and purification is a major challenge for energy, environment, and health applications. Of utmost importance for the nuclear industry, novel separation processes for Xe are urgently needed for spent nuclear fuel reprocessing and nuclear activity monitoring. The recovered, non-radioactive Xe is also of high economic value for lighting, surgical anesthetic, etc. Here, using adsorption and breakthrough experiments and statistical mechanics molecular simulation, we show the outstanding performance of zeolite-supported silver nanoparticles to capture/separate Xe at low concentrations (0.087-100 ppm). We also establish the efficiency of temperature swing adsorption based on such adsorbents for Xe separation from Kr/Xe mixtures and air streams corresponding to off-gases generated by nuclear reprocessing. This study paves the way for the development of novel, cost-efficient technologies relying on the large selectivity/capacity of adsorbent-supported silver nanoparticles which surpass all materials ever tested.

Molecular Level Characterization of the Structure and Interactions in Peptide-Functionalized Metal-Organic Frameworks.

We use density functional theory, newly parameterized molecular dynamics simulations, and last generation 15 N dynamic nuclear polarization surface enhanced solid-state NMR spectroscopy (DNP SENS) to understand graft-host interactions and effects imposed by the metal-organic framework (MOF) host on peptide conformations in a peptide-functionalized MOF. Focusing on two grafts typified by MIL-68-proline (-Pro) and MIL-68-glycine-proline (-Gly-Pro), we identified the most likely peptide conformations adopted in the functionalized hybrid frameworks. We found that hydrogen bond interactions between the graft and the surface hydroxyl groups of the MOF are essential in determining the peptides conformation(s). DNP SENS methodology shows unprecedented signal enhancements when applied to these peptide-functionalized MOFs. The calculated chemical shifts of selected MIL-68-NH-Pro and MIL-68-NH-Gly-Pro conformations are in a good agreement with the experimentally obtained 15 N NMR signals. The study shows that the conformations of peptides when grafted in a MOF host are unlikely to be freely distributed, and conformational selection is directed by strong host-guest interactions.

Enantiopure Peptide-Functionalized Metal-Organic Frameworks.

We present herein the first example of metal-organic frameworks postfunctionalized with peptides. Our microwave-assisted postsynthetic modification method yields enantiopure peptides anchored inside MOF cavities. Al-MIL-101-NH2, In-MIL-68-NH2, and Zr-UiO-66-NH2 were chosen as starting platforms. A single amino acid and various oligopeptides are grafted with yields up to 60% after a 30 min microwave-assisted coupling-deprotection sequence. This allows efficient preparation of a library of functional hybrid solids for molecular recognition applications such as sensing, separation, or asymmetric catalysis, as demonstrated here for the chiral aldol reaction.

Water adsorption in MOFs: fundamentals and applications.

This review article presents the fundamental and practical aspects of water adsorption in Metal-Organic Frameworks (MOFs). The state of the art of MOF stability in water, a crucial issue to many applications in which MOFs are promising candidates, is discussed here. Stability in both gaseous (such as humid gases) and aqueous media is considered. By considering a non-exhaustive yet representative set of MOFs, the different mechanisms of water adsorption in this class of materials are presented: reversible and continuous pore filling, irreversible and discontinuous pore filling through capillary condensation, and irreversibility arising from the flexibility and possible structural modifications of the host material. Water adsorption properties of more than 60 MOF samples are reported. The applications of MOFs as materials for heat-pumps and adsorbent-based chillers and proton conductors are also reviewed. Some directions for future work are suggested as concluding remarks.

Superstructure of a substituted zeolitic imidazolate metal-organic framework determined by combining proton solid-state NMR spectroscopy and DFT calculations.

We report the supercell crystal structure of a ZIF-8 analog substituted imidazolate metal-organic framework (SIM-1) obtained by combining solid-state nuclear magnetic resonance and powder X-ray diffraction experiments with density functional theory calculations.

Assessing chemical heterogeneity at the nanoscale in mixed-ligand metal-organic frameworks with the PTIR technique.

Recently, the use of mixtures of organic-building-block linkers has given chemists an additional degree of freedom for engineering metal-organic frameworks (MOFs) with specific properties; however, the poor characterization of the chemical complexity of such MixMOF structures by conventional techniques hinders the verification of rational design. Herein, we describe the application of a technique known as photothermal induced resonance to individual MixMOF microcrystals to elucidate their chemical composition with nanoscale resolution. Results show that MixMOFs isoreticular to In-MIL-68, obtained either directly from solution or by postsynthetic linker exchange, are homogeneous down to approximately 100 nm. Additionally, we report a novel in situ process that enables the engineering of anisotropic domains in MOF crystals with submicron linker-concentration gradients.

MOF-supported selective ethylene dimerization single-site catalysts through one-pot postsynthetic modification.

The one-pot postfunctionalization allows anchoring a molecular nickel complex into a mesoporous metal-organic framework (Ni@(Fe)MIL-101). It is generating a very active and reusable catalyst for the liquid-phase ethylene dimerization to selectively form 1-butene. Higher selectivity for 1-butene is found using the Ni@(Fe)MIL-101 catalyst than reported for molecular nickel diimino complexes.

Absolute molecular sieve separation of ethylene/ethane mixtures with silver zeolite A.

Absolute ethylene/ethane separation is achieved by ethane exclusion on silver-exchanged zeolite A adsorbent. This molecular sieving type separation is attributed to the pore size of the adsorbent, which falls between ethylene and ethane kinetic diameters.

Enhanced H2 uptake in solvents confined in mesoporous metal-organic framework.

Hydrogen uptake at 298 K and 30 bar in hybrid sorbents consisting of n-hexane confined in MIL-101 is found to be 22 times larger than in sole n-hexane. The enhanced solubility in MIL-101, found to be 3 times larger than in mesoporous silica of similar pore size, highlights the key roles played by surface chemistry and accessible surface area.

Generic postfunctionalization route from amino-derived metal-organic frameworks.

This study deals with the development of a soft, generic, one-pot postfunctionalization method for metal-organic frameworks (MOFs) starting from compounds with an amino group on the linker. The first step consists of transforming the amino group into azide (N(3)) by an unconventional route using tBuONO and TMSN(3). In the same vessel, the desired functionalized MOF then is obtained by the Huisgen 1,3-dipolar cycloaddition of azides to alkynes, otherwise known as the "click" reaction. The method was applied to DMOF-NH(2) and MIL-68(In)-NH(2), which represent two distinct and important classes of MOF. For both, the functionalization was complete (>90% grafting) and the crystallinity was maintained. Thanks to the large diversity and availability of cyano- and acetylene-based chemicals, this method opens the door to tailor-made functionalized MOFs.

Metal-organic frameworks: opportunities for catalysis.

The role of metal-organic frameworks (MOFs) in the field of catalysis is discussed, and special focus is placed on their assets and limits in light of current challenges in catalysis and green chemistry. Their structural and dynamic features are presented in terms of catalytic functions along with how MOFs can be designed to bridge the gap between zeolites and enzymes. The contributions of MOFs to the field of catalysis are comprehensively reviewed and a list of catalytic candidates is given. The subject is presented from a multidisciplinary point of view covering solid-state chemistry, materials science, and catalysis.

Computational methods in the development of a knowledge-based system for the prediction of solid catalyst performance.

The objective of this work is the construction of a correlation between characteristics of heterogeneous catalysts, encoded in a descriptor vector, and their experimentally measured performances in the propene oxidation reaction. In this paper the key issue in the modeling process, namely the selection of adequate input variables, is explored. Several data-driven feature selection strategies were applied in order to obtain an estimate of the differences in variance and information content of various attributes, furthermore to compare their relative importance. Quantitative property activity relationship techniques using probabilistic neural networks have been used for the creation of various semi-empirical models. Finally, a robust classification model, assigning selected attributes of solid compounds as input to an appropriate performance class in the model reaction was obtained. It has been evident that the mathematical support for the primary attributes set proposed by chemists can be highly desirable.

Development of an integrated informatics toolbox: HT kinetic and virtual screening.

We discuss thoroughly aspects and issues for the development of a bespoke, but generic, electronic infrastructure designed to cope with the dynamic in high-throughput experimentation and knowledge management, is applicable to large or contract research organizations. We present the first generation of an informatics platform developed for TOPCOMBI, a research project funded by the European Commission for Nanotechnology and Nanoscience. It is composed by an infrastructure and a collection of modules dealing with laboratory analytics, robotics, data handling and analytics, optimization, in-database processing and visualization, which are developed collegially by the partners of the Consortium. This best-of-breed informatics system enables the capture and the re-usage of processes and methodologies, i.e. process and data flows, using the workflow paradigm. Complex workflows designed by power users can be eventually used by either other domain experts or by novices through a web portal. Workflows can also be run interactively to allow visual analytics for instance, or automatically. We present two case studies dealing with the kinetic study of glycerol catalytic oxidation using parallel equipments, and a novel, fully integrated QSAR applied in heterogeneous catalysis, respectively.