Adaptation of Anaerobic Digestion Microbial Communities to High Ammonium Levels: Insights from Strain-Resolved Metagenomics.

Ammonia release from proteinaceous feedstocks represents the main inhibitor of the anaerobic digestion (AD) process, which can result in a decreased biomethane yield or even complete failure of the process. The present study focused on the adaptation of mesophilic AD communities to a stepwise increase in the concentration of ammonium chloride in synthetic medium with casein used as the carbon source. An adaptation process occurring over more than 20 months allowed batch reactors to reach up to 20 g of NH4+ N/L without collapsing in acidification nor ceasing methane production. To decipher the microbial dynamics occurring during the adaptation and determine the genes mostly exposed to selective pressure, a combination of biochemical and metagenomics analyses was performed, reconstructing the strains of key species and tracking them over time. Subsequently, the adaptive metabolic mechanisms were delineated by following the single nucleotide variants (SNVs) characterizing the strains and prioritizing the associated genes according to their function. An in-depth exploration of the archaeon Methanoculleus bourgensis vb3066 and the putative syntrophic acetate-oxidizing bacteria Acetomicrobium sp. ma133 identified positively selected SNVs on genes involved in stress adaptation. The intraspecies diversity with multiple coexisting strains in a temporal succession pattern allows us to detect the presence of an additional level of diversity within the microbial community beyond the species level.

Exploring industrial and natural Saccharomyces cerevisiae strains for the bio-based economy from biomass: the case of bioethanol.

Saccharomyces cerevisiae is the preferred microorganism for the production of bioethanol from biomass. Industrial strain development for first-generation ethanol from sugar cane and corn mostly relies on the historical know-how from high gravity beer brewing and alcohol distilleries. However, the recent design of yeast platforms for the production of second-generation biofuels and green chemicals from lignocellulose exposes yeast to different environments and stress challenges. The industrial need for increased productivity, wider substrate range utilization, and the production of novel compounds leads to renewed interest in further extending the use of current industrial strains by exploiting the immense, and still unknown, potential of natural yeast strains. This review describes key metabolic engineering strategies tailored to develop efficient industrial and novel natural yeast strains towards bioethanol production from biomass. Furthermore, it shapes how proof-of-concept studies, often advanced in academic settings on natural yeast, can be upgraded to meet the requirements for industrial applications. Academic and industrial research should continue to cooperate on both improving existing industrial strains and developing novel phenotypes by exploring the vast biodiversity available in nature on the road to establish yeast biorefineries where a range of biomass substrates are converted into valuable compounds.

Comparing laboratory and industrial yeast platforms for the direct conversion of cellobiose into ethanol under simulated industrial conditions.

An engineered yeast producing all the cellulases needed for cellulose saccharification could produce ethanol from lignocellulose at a lower cost. This study aimed to express fungal ß-glucosidases in Saccharomyces cerevisiae to convert cellobiose into ethanol. Furthermore, two engineering platforms (laboratory vs industrial strain) have been considered towards the successful deployment of the engineered yeast under simulated industrial conditions. The industrial S. cerevisiae M2n strain was engineered through the δ-integration of the ß-glucosidase Pccbgl1 of Phanerochaete chrysosporium. The most efficient recombinant, M2n[pBKD2-Pccbgl1]-C1, was compared to the laboratory S. cerevisiae Y294[Pccbgl1] strain, expressing Pccbgl1 from episomal plasmids, in terms of cellobiose fermentation in a steam exploded sugarcane bagasse pre-hydrolysate. Saccharomyces cerevisiae Y294[Pccbgl1] was severely hampered by the pre-hydrolysate. The industrial M2n[pBKD2-Pccbgl1]-C1 could tolerate high inhibitors-loading in pre-hydrolysate under aerobic conditions. However, in oxygen limited environment, the engineered industrial strain displayed ethanol yield higher than the laboratory Y294[Pccbgl1] only when supplemented with supernatant containing further recombinant ß-glucosidase. This study showed that the choice of the host strain is crucial to ensure bioethanol production from lignocellulose. A novel cellobiose-to-ethanol route has been developed and the recombinant industrial yeast could be a promising platform towards the future consolidated bioprocessing of lignocellulose into ethanol.

Consolidated bioprocessing of starchy substrates into ethanol by industrial Saccharomyces cerevisiae strains secreting fungal amylases.

The development of a yeast strain that converts raw starch to ethanol in one step (called Consolidated Bioprocessing, CBP) could significantly reduce the commercial costs of starch-based bioethanol. An efficient amylolytic Saccharomyces cerevisiae strain suitable for industrial bioethanol production was developed in this study. Codon-optimized variants of the Thermomyces lanuginosus glucoamylase (TLG1) and Saccharomycopsis fibuligera α-amylase (SFA1) genes were δ-integrated into two S. cerevisiae yeast with promising industrial traits, i.e., strains M2n and MEL2. The recombinant M2n[TLG1-SFA1] and MEL2[TLG1-SFA1] yeast displayed high enzyme activities on soluble and raw starch (up to 8118 and 4461 nkat/g dry cell weight, respectively) and produced about 64 g/L ethanol from 200 g/L raw corn starch in a bioreactor, corresponding to 55% of the theoretical maximum ethanol yield (g of ethanol/g of available glucose equivalent). Their starch-to-ethanol conversion efficiencies were even higher on natural sorghum and triticale substrates (62 and 73% of the theoretical yield, respectively). This is the first report of direct ethanol production from natural starchy substrates (without any pre-treatment or commercial enzyme addition) using industrial yeast strains co-secreting both a glucoamylase and α-amylase.

Bacteriocinogenic potential and safety evaluation of non-starter Enterococcus faecium strains isolated from home made white brine cheese.

Four LAB strains, isolated from Bulgarian home made white brine cheese, were selected for their effective inhibition against Listeria monocytogenes. According to their biochemical and physiological characteristics, the strains were classified as members of Enterococcus genus, and then identified as Enterococcus faecium by 16S rDNA sequencing. Their bacteriocin production and inhibitory spectrum were evaluated together with the occurrence of several bacteriocin genes (entA, entB, entP, entL50B). Their virulence potential and safety was assessed both using PCR targeted to the genes gelE, hyl, asa1, esp, cylA, efaA, ace, vanA, vanB, hdc1, hdc2, tdc and odc and by phenotypical tests for antibiotic resistance, gelatinase, lipase, DNAse and α- and ß-haemolysis. The E. faecium strains harboured at least one enterocin gene while the occurrence of virulence, antibiotic resistance and biogenic amines genes was limited. Considering their strong antimicrobial activity against L. monocytogenes strains, the four E. faecium strains exhibited promising potential as bio-preservatives cultures for fermented food productions.

Copolymers as a turning point for large scale polyhydroxyalkanoates applications.

Traditional plastics reshaped the society thanks to their brilliant properties and cut-price manufacturing costs. However, their protracted durability and limited recycling threaten the environment. Worthy alternatives seem to be polyhydroxyalkanoates, compostable biopolymers produced by several microbes. The most common 3-hydroxybutyrate homopolymer has limited applications calling for copolymers biosynthesis to enhance material properties. As a growing number of researches assess the discovery of novel comonomers, great endeavors are dedicated as well to copolymers production scale-up, where the choice of the microbial carbon source significantly affects the overall economic feasibility. Diving into novel metabolic pathways, engineered strains, and cutting-edge bioprocess strategies, this review aims to survey up-to-date publications about copolymers production, focusing primarily on precursors origins. Specifically, in the core of the review, copolymers precursors have been divided into three categories based on their economic value: the costliest structurally related ones, the structurally unrelated ones, and finally various low-cost waste streams. The combination of cheap biomasses, efficient pretreatment strategies, and robust microorganisms paths the way towards the development of versatile and circular polymers. Conceived to researchers and industries interested in tackling polyhydroxyalkanoates production, this review explores an angle often underestimated yet of prime importance: if PHAs copolymers offer advanced properties and sustainable end-of-life, the feedstock choice for their upstream becomes a major factor in the development of plastic substitutes.

Biological carbon capture from biogas streams: Insights into Cupriavidus necator autotrophic growth and transcriptional profile.

Recycling carbon-rich wastes into high-value platform chemicals through biological processes provides a sustainable alternative to petrochemicals. Cupriavidus necator, known for converting carbon dioxide (CO2) into polyhydroxyalkanoates (PHA) was studied for the first time using biogas streams as the sole carbon source. The bacterium efficiently consumed biogenic CO2 from raw biogas with methane at high concentrations (50%) proving non-toxic. Continuous addition of H2 and O2 enabled growth trends comparable to glucose-based heterotrophic growth. Transcriptomic analysis revealed CO2-adaptated cultures exhibited upregulation of hydrogenases and Calvin cycle enzymes, as well as genes related to electron transport, nutrient uptake, and glyoxylate cycle. Non-adapted samples displayed activation of stress response mechanisms, suggesting potential lags in large-scale processes. These findings showcase the setting of growth parameters for a pioneering biological biogas upgrading strategy, emphasizing the importance of inoculum adaptation for autotrophic growth and providing potential targets for genetic engineering to push PHA yields in future applications.

Engineered yeast for the efficient hydrolysis of polylactic acid.

Polylactic acid (PLA) is a major contributor to the global bioplastic production capacity. However, post-consumer PLA waste is not fully degraded during non-optimal traditional organic waste treatment processes and can persist in nature for many years. Efficient enzymatic hydrolysis of PLA would contribute to cleaner, more energy-efficient, environmentally friendly waste management processes. However, high costs and a lack of effective enzyme producers curtail the large-scale application of such enzymatic systems. This study reports the recombinant expression of a fungal cutinase-like enzyme (CLE1) in the yeast Saccharomyces cerevisiae, which produced a crude supernatant that efficiently hydrolyses different types of PLA materials. The codon-optimised Y294[CLEns] strain delivered the best enzyme production and hydrolysis capabilities, releasing up to 9.44 g/L lactic acid from 10 g/L PLA films with more than 40% loss in film weight. This work highlights the potential of fungal hosts producing PLA hydrolases for future commercial applications in PLA recycling.

Enzymatic hydrolysis of single-use bioplastic items by improved recombinant yeast strains.

Single-use bioplastic items pose new challenges for a circular plastics economy as they require different processing than petroleum-based plastics items. Microbial and enzymatic recycling approaches could address some of the pitfalls created by the influx of bioplastic waste. In this study, the recombinant expression of a cutinase-like-enzyme (CLE1) was improved in the yeast Saccharomyces cerevisiae to efficiently hydrolyse several commercial single-use bioplastic items constituting blends of poly(lactic acid), poly(1,4-butylene adipate-co-terephthalate), poly(butylene succinate) and mineral fillers. The hydrolysis process was optimised in controlled bioreactor configurations to deliver substantial monomer concentrations and, ultimately, 29 to 78% weight loss. Product inhibition studies and molecular docking provided insights into potential bottlenecks of the enzymatic hydrolysis process, while FT-IR analysis showed the preferential breakdown of specific polymers in blended commercial bioplastic items. This work constitutes a step towards implementing enzymatic hydrolysis as a circular economy approach for the valorisation of end-of-life single-use bioplastic items.

Autotrophic production of polyhydroxyalkanoates using acidogenic-derived H2 and CO2 from fruit waste.

The environmental concerns regarding fossil plastics call for alternative biopolymers such as polyhydroxyalkanoates (PHAs) whose manufacturing costs are however still too elevated. Autotrophic microbes like Cupriavidus necator, able to convert CO2 and H2 into PHAs, offer an additional strategy. Typically, the preferred source for CO2 and H2 are expensive pure gases or syngas, which has toxic compounds for most PHAs-accumulating strains. In this work, for the first time, H2 and CO2 originating from an acidogenic reactor were converted autotrophically into poly(3-hydroxybutyrate) P(3HB). During the first stage, a mixed microbial community continuously catabolized melon waste into H2 (26.7 %) and CO2 (49.2 %) that were then used in a second bioreactor by C. necator DSM 545 to accumulate 1.7 g/L P(3HB). Additionally, the VFAs (13 gCOD/L) produced during acidogenesis were processed into 2.7 g/L of P(3HB-co-3HV). This is the first proof-of-concept of using acidogenic-derived H2 and CO2 from fruit waste to produce PHAs.

Renewing Lost Genetic Variability with a Classical Yeast Genetics Approach.

Due to their long domestication time course, many industrial Saccharomyces cerevisiae strains are adopted in numerous processes mostly for historical reasons instead of scientific and technological needs. As such, there is still significant room for improvement for industrial yeast strains relying on yeast biodiversity. This paper strives to regenerate biodiversity with the innovative application of classic genetic methods to already available yeast strains. Extensive sporulation was indeed applied to three different yeast strains, specifically selected for their different origins as well as backgrounds, with the aim of clarifying how new variability was generated. A novel and easy method to obtain mono-spore colonies was specifically developed, and, to reveal the extent of the generated variability, no selection after sporulation was introduced. The obtained progenies were then tested for their growth in defined mediums with high stressor levels. A considerable and strain-specific increase in both phenotypic and metabolomic variability was assessed, and a few mono-spore colonies were found to be of great interest for their future exploitation in selected industrial processes.

Additional glucoamylase genes increase ethanol productivity on rice and potato waste streams by a recombinant amylolytic yeast.

The implementation of consolidated bioprocessing for converting starch to ethanol relies on a robust yeast that produces enough amylases for rapid starch hydrolysis. Furthermore, using low-cost substrates will assist with competitive ethanol prices and support a bioeconomy, especially in developing countries. This paper addresses both challenges with the expression of additional glucoamylase gene copies in an efficient amylolytic strain (Saccharomyces cerevisiae ER T12) derived from the industrial yeast, Ethanol Red™. Recombinant ER T12 was used as a host to increase ethanol productivity during raw starch fermentation; the ER T12.7 variant, selected from various transformants, displayed enhanced raw starch conversion and a 36% higher ethanol concentration than the parental strain after 120 h. Unripe rice, rice bran, potato waste and potato peels were evaluated as alternative starchy substrates to test ER T12.7's fermenting ability. ER T12.7 produced high ethanol yields at significantly improved ethanol productivity, key criteria for its industrial application.

Erwiniaceae bacteria play defensive and nutritional roles in two widespread ambrosia beetles.

Ambrosia beetles are fungal-growing insects excavating galleries deep inside the wood. Their success as invaders increased scientific interest towards them. However, most studies on their microbiota targeted their fungal associates whereas the role of bacterial associates is understudied. To explore the role of abundant microbial associates, we isolated bacteria from active galleries of two widespread ambrosia beetles, Xylosandrus crassiusculus and X. germanus. These isolates were classified within the Erwiniaceae family and through a phylogenetic analysis including isolates from other insects we showed that they clustered with isolates obtained from ambrosia and bark beetles, including Erwinia typographi. The whole genome analysis of the isolate from active galleries of X. crassiusculus suggested that this bacterium plays both a nutritional role, by providing essential amino acids and enzymes for the hydrolysis of plant biomass, and a defensive role, by producing antibiotics. This defensive role was also tested in vitro against fungi, including mutualists, common associates, and parasites. The bacteria inhibited the growth of some of the common associates and parasites but did not affect mutualists. Our study supported the hypothesis of a mutualist role of Erwiniaceae bacteria in ambrosia beetles and highlighed the importance of bacteria in maintaining the symbiosis of their host with nutritional fungi.

Codon-optimized glucoamylase sGAI of Aspergillus awamori improves starch utilization in an industrial yeast.

The development of a yeast that converts raw starch to ethanol in one step (called consolidated bioprocessing) could yield large cost reductions in the bioethanol industry. The aim of this study was to develop an efficient amylolytic Saccharomyces cerevisiae strain suitable for industrial bioethanol production. A native and codon-optimized variant of the Aspergillus awamori glucoamylase gene were expressed in the S. cerevisiae Y294 laboratory strain. Codon optimization resulted to be effective and the synthetic sequence sGAI was then δ-integrated into a S. cerevisiae strain with promising industrial fermentative traits. The mitotically stable recombinant strains showed high enzymatic capabilities both on soluble and raw starch (2425 and 1140 nkat/g dry cell weight, respectively). On raw corn starch, the engineered yeasts exhibited improved fermentative performance with an ethanol yield of 0.42 (g/g), corresponding to 75 % of the theoretical maximum yield.

Effects of heat treatment on microbial communities of granular sludge for biological hydrogen production.

Dark fermentation shares many features with anaerobic digestion with the exception that to maximize hydrogen production, methanogens and hydrogen-consuming bacteria should be inhibited. Heat treatment is widely applied as an inoculum pre-treatment due to its effectiveness in inhibiting methanogenic microflora but it may not exclusively select for hydrogen-producing bacteria. This work evaluated the effects of heat treatment on microbial viability and structure of anaerobic granular sludge. Heat treatment was carried out on granular sludge at 100 °C with four residence times (0.5, 1, 2 and 4 h). Hydrogen production of treated sludges was studied from glucose by means of batch test at different pH values. Results indicated that each heat treatment strongly influenced the granular sludge resulting in microbial communities having different hydrogen productions. The highest hydrogen yields (2.14 moles of hydrogen per mole of glucose) were obtained at pH 5.5 using the sludge treated for 4 h characterized by the lowest CFU concentration (2.3 × 10(3)CFU/g sludge). This study demonstrated that heat treatment should be carefully defined according to the structure of the sludge microbial community, allowing the selection of highly efficient hydrogen-producing microbes.

Polyhydroxyalkanoate Production from Fruit and Vegetable Waste Processing.

Traditional plastics represent a tremendous threat to the environment because of increases in polluting manufacturing as well as their very extended degradation time. Polyhydroxyalkanoates (PHAs) are polymers with similar performance to plastic but are compostable and synthesizable from renewable sources and therefore could be a replacement for fossil-based plastics. However, their production costs are still too high, thus demanding the investigation of new and cheap substrates. In this sense, agricultural wastes are attractive because they are inexpensive and largely available. Specifically, fruit and vegetables are rich in sugars that could be fermented into PHAs. In this work two strains, Cupriavidus necator DSM 545 and Hydrogenophaga pseudoflava DSM 1034, well-known PHA-producing microbes, were screened for their ability to grow and accumulate PHAs. Ten different fruit and vegetable processing waste streams, never before reported in combination with these strains, were tested. Residues from red apple and melon were found to be the most suitable feedstocks for PHA production. Under specific selected conditions, C. necator DSM 545 accumulated up to 7.4 and 4.3 g/L of 3-hydroxybutyrate (3HB) from red apple and melon, respectively. Copolymer production was also obtained from melon. These results confirm the attractiveness of food processing waste as a promising candidate for PHA production. Ultimately, these novel substrates draw attention for future studies on process optimization and upscaling with C. necator.

Innovative co-production of polyhydroxyalkanoates and methane from broken rice.

Broken rice, a low-cost starchy residue of the rice industry, can be an interesting substrate to reduce the polyhydroxyalkanoates (PHAs) production cost. However, since the most common PHAs-producing strains lack amylases, this waste must be firstly hydrolysed by additional commercial enzymes. In this work, the acidogenesis phase of the anaerobic digestion was exploited as efficient hydrolysis step to convert broken rice into volatile fatty acids (VFAs) to be used as PHAs carbon source by Cupriavidus necator DSM 545, one of the most promising PHAs-producing microbes. Broken rice, both non-hydrolysed and enzymatically hydrolysed, was processed in two continuous stirred tank reactors, at hydraulic retention times (HRT) of 5, 4 and, 3 days, to produce VFAs. The highest VFAs levels were obtained from non-hydrolysed broken rice which was efficiently exploited for PHAs accumulation by C. necator DSM 545. PHAs contents were higher after 96 h of incubation and, noteworthy, reached the highest value of 0.95 g/L in the case of 4 days HRT without any chemicals supplementation, except vitamins. Moreover, in view of a biorefinery approach, the residual solid fraction was used for methane production resulting in promising CH4 levels. Methane yields were very promising again for 4 days HRT. As such, this HRT resulted to be the most suitable to obtain effluents with high promise in terms of both PHAs accumulation and CH4 production. In addition, these results demonstrate that broken rice could be efficiently processed into two valuable products without any costly enzymatic pre-treatment and pave the way for future biorefining approaches where this by-product can be converted in a cluster of added-value compounds. Techno-economical estimations are in progress to assess the feasibility of the entire process, in view of supporting the low-cost conversion of organic waste into valuable products.

Engineering Cupriavidus necator DSM 545 for the one-step conversion of starchy waste into polyhydroxyalkanoates.

Starch-rich by-products could be efficiently exploited for polyhydroxyalkanoates (PHAs) production. Unfortunately, Cupriavidus necator DSM 545, one of the most efficient PHAs producers, is not able to grow on starch. In this study, a recombinant amylolytic strain of C. necator DSM 545 was developed for the one-step PHAs production from starchy residues, such as broken rice and purple sweet potato waste. The glucodextranase G1d from Arthrobacter globiformis I42 and the α-amylase amyZ from Zunongwangia profunda SM-A87 were co-expressed into C. necator DSM 545. The recombinant C. necator DSM 545 #11, selected for its promising hydrolytic activity, produced high biomass levels with noteworthy PHAs titers: 5.78 and 3.65 g/L from broken rice and purple sweet potato waste, respectively. This is the first report on the engineering of C. necator DSM 545 for efficient amylase production and paves the way to the one-step conversion of starchy waste into PHAs.

Biodiversity and Bioprospecting of Fungal Endophytes from the Antarctic Plant Colobanthus quitensis.

Microorganisms from extreme environments are considered as a new and valuable reservoir of bioactive molecules of biotechnological interest and are also utilized as tools for enhancing tolerance to (a)biotic stresses in crops. In this study, the fungal endophytic community associated with the leaves of the Antarctic angiosperm Colobanthus quitensis was investigated as a new source of bioactive molecules. We isolated 132 fungal strains and taxonomically annotated 26 representative isolates, which mainly belonged to the Basidiomycota division. Selected isolates of Trametes sp., Lenzites sp., Sistotrema sp., and Peniophora sp. displayed broad extracellular enzymatic profiles; fungal extracts from some of them showed dose-dependent antitumor activity and inhibited the formation of amyloid fibrils of α-synuclein and its pathological mutant E46K. Selected fungal isolates were also able to promote secondary root development and fresh weight increase in Arabidopsis and tomato and antagonize the growth of pathogenic fungi harmful to crops. This study emphasizes the ecological and biotechnological relevance of fungi from the Antarctic ecosystem and provides clues to the bioprospecting of Antarctic Basidiomycetes fungi for industrial, agricultural, and medical applications.

Selection of Superior Yeast Strains for the Fermentation of Lignocellulosic Steam-Exploded Residues.

The production of lignocellulosic ethanol calls for a robust fermentative yeast able to tolerate a wide range of toxic molecules that occur in the pre-treated lignocellulose. The concentration of inhibitors varies according to the composition of the lignocellulosic material and the harshness of the pre-treatment used. It follows that the versatility of the yeast should be considered when selecting a robust strain. This work aimed at the validation of seven natural Saccharomyces cerevisiae strains, previously selected for their industrial fitness, for their application in the production of lignocellulosic bioethanol. Their inhibitor resistance and fermentative performances were compared to those of the benchmark industrial yeast S. cerevisiae Ethanol Red, currently utilized in the second-generation ethanol plants. The yeast strains were characterized for their tolerance using a synthetic inhibitor mixture formulated with increasing concentrations of weak acids and furans, as well as steam-exploded lignocellulosic pre-hydrolysates, generally containing the same inhibitors. The eight non-diluted liquors have been adopted to assess yeast ability to withstand bioethanol industrial conditions. The most tolerant S. cerevisiae Fm17 strain, together with the reference Ethanol Red, was evaluated for fermentative performances in two pre-hydrolysates obtained from cardoon and common reed, chosen for their large inhibitor concentrations. S. cerevisiae Fm17 outperformed the industrial strain Ethanol Red, producing up to 18 and 39 g/L ethanol from cardoon and common reed, respectively, with ethanol yields always higher than those of the benchmark strain. This natural strain exhibits great potential to be used as superior yeast in the lignocellulosic ethanol plants.