Stereochemistry and Intermolecular Interactions Influence Carrier Peptide-Mediated Insulin Delivery.

The inherent low oral bioavailability of therapeutic peptides can be enhanced by the cell-penetrating peptide penetratin and its analogues shuffle and penetramax applied as carriers for delivery of insulin. In this study, the objective was to gain mechanistic insights on the effect of the carrier peptide stereochemistry on their interactions with insulin and on insulin delivery. Insulin-carrier peptide interactions were investigated using small-angle X-ray scattering and cryogenic transmission electron microscopy, while the insulin and peptide stability and transepithelial insulin permeation were evaluated in the Caco-2 cell culture model along with the carrier peptide-induced effects on epithelial integrity and cellular metabolic activity. Interestingly, the insulin transepithelial permeation was influenced by the degree of insulin-carrier peptide complexation and depended on the stereochemistry of penetramax but not of penetratin and shuffle. The l-form of the peptides initially decreased the epithelial integrity comparable to that induced by the d-peptides, suggesting a comparable mechanism of action. The immediate decrease was reversible during exposure of the Caco-2 epithelium to the l-peptides but not during exposure to the d-peptides, likely a result of their higher stability. Overall, exploration of the stereochemistry showed to be an interesting strategy for carrier peptide-mediated insulin delivery.

Mechanisms of Drug Solubility Enhancement Induced by ß-Lactoglobulin-Based Amorphous Solid Dispersions.

Protein-based amorphous solid dispersions (ASDs) have emerged as a promising approach for enhancing solubility in comparison to crystalline drugs. The dissolution behavior of protein-based amorphous solid dispersions (ASDs) was investigated in various pH media. ASDs of four poorly soluble model drugs with acidic (furosemide and indomethacin), basic (carvedilol), and neutral (celecoxib) properties were prepared by spray drying at 30 wt % drug loading with the protein ß-lactoglobulin (BLG). The effect of spray-dried BLG (SD-BLG) solubility and protein binding ability with dissolved drugs in solution were investigated to retrieve the mechanisms governing the improvement of drug solubility from the BLG-based ASDs. Powder dissolution results showed that all ASDs obtained a higher maximum concentration (Cmax) compared to the respective pure crystalline drugs. It was found that the solubility increase of the drugs from the ASDs was to a large extent dependent on the solubility of the pure SD-BLG at the investigated pH values (low solubility at pH near the isoelectric point (pI) of BLG). Furthermore, drug-protein interactions in a solution were observed, in particular at pH values where the drugs were neutral. These drug-protein interactions also resulted, to some extent, in the stabilization of the drug in supersaturation.

Recommendations for addressing the translational gap between experimental and clinical research on amyloid diseases.

This paper is a report of recommendations for addressing translational challenges in amyloid disease research. They were developed during and following an international online workshop organized by the LINXS Institute of Advanced Neutron and X-Ray Science in March 2021. Key suggestions include improving cross-cultural communication between basic science and clinical research, increasing the influence of scientific societies and journals (vis-à-vis funding agencies and pharmaceutical companies), improving the dissemination of negative results, and strengthening the ethos of science.

Stabilizing Mechanisms of ß-Lactoglobulin in Amorphous Solid Dispersions of Indomethacin.

Proteins, and in particular whey proteins, have recently been introduced as a promising excipient class for stabilizing amorphous solid dispersions. However, despite the efficacy of the approach, the molecular mechanisms behind the stabilization of the drug in the amorphous form are not yet understood. To investigate these, we used experimental and computational techniques to study the impact of drug loading on the stability of protein-stabilized amorphous formulations. ß-Lactoglobulin, a major component of whey, was chosen as a model protein and indomethacin as a model drug. Samples, prepared by either ball milling or spray drying, formed single-phase amorphous solid dispersions with one glass transition temperature at drug loadings lower than 40-50%; however, a second glass transition temperature appeared at drug loadings higher than 40-50%. Using molecular dynamics simulations, we found that a drug-rich phase occurred at a loading of 40-50% and higher, in agreement with the experimental data. The simulations revealed that the mechanisms of the indomethacin stabilization by ß-lactoglobulin were a combination of (a) reduced mobility of the drug molecules in the first drug shell and (b) hydrogen-bond networks. These networks, formed mostly by glutamic and aspartic acids, are situated at the ß-lactoglobulin surface, and dependent on the drug loading (>40%), propagated into the second and subsequent drug layers. The simulations indicate that the reduced mobility dominates at low (<40%) drug loadings, whereas hydrogen-bond networks dominate at loadings up to 75%. The computer simulation results agreed with the experimental physical stability data, which showed a significant stabilization effect up to a drug fraction of 70% under dry storage. However, under humid conditions, stabilization was only sufficient for drug loadings up to 50%, confirming the detrimental effect of humidity on the stability of protein-stabilized amorphous formulations.

Zinc determines dynamical properties and aggregation kinetics of human insulin.

Protein aggregation is a widespread process leading to deleterious consequences in the organism, with amyloid aggregates being important not only in biology but also for drug design and biomaterial production. Insulin is a protein largely used in diabetes treatment, and its amyloid aggregation is at the basis of the so-called insulin-derived amyloidosis. Here, we uncover the major role of zinc in both insulin dynamics and aggregation kinetics at low pH, in which the formation of different amyloid superstructures (fibrils and spherulites) can be thermally induced. Amyloid aggregation is accompanied by zinc release and the suppression of water-sustained insulin dynamics, as shown by particle-induced x-ray emission and x-ray absorption spectroscopy and by neutron spectroscopy, respectively. Our study shows that zinc binding stabilizes the native form of insulin by facilitating hydration of this hydrophobic protein and suggests that introducing new binding sites for zinc can improve insulin stability and tune its aggregation propensity.

Peptide-Membrane Interactions Monitored by Fluorescence Lifetime Imaging: A Study Case of Transportan 10.

The interest on detailed analysis of peptide-membrane interactions is of great interest in both fundamental and applied sciences as these may relate to both functional and pathogenic events. Such interactions are highly dynamic and spatially heterogeneous, making the investigation of the associated phenomena highly complex. The specific properties of membranes and peptide structural details, together with environmental conditions, may determine different events at the membrane interface, which will drive the fate of the peptide-membrane system. Here, we use an experimental approach based on the combination of spectroscopy and fluorescence microscopy methods to characterize the interactions of the multifunctional amphiphilic peptide transportan 10 with model membranes. Our approach, based on the use of suitable fluorescence reporters, exploits the advantages of phasor plot analysis of fluorescence lifetime imaging microscopy measurements to highlight the molecular details of occurring membrane alterations in terms of rigidity and hydration. Simultaneously, it allows following dynamic events in real time without sample manipulation distinguishing, with high spatial resolution, whether the peptide is adsorbed to or inserted in the membrane.

Electrospun α-Lactalbumin Nanofibers for Site-Specific and Fast-Onset Delivery of Nicotine in the Oral Cavity: An In Vitro, Ex Vivo, and Tissue Spatial Distribution Study.

Nicotine replacement therapy (NRT) formulations for oromucosal administration induce a delayed rise in nicotine blood levels as opposed to the immediate nicotine increase obtained from cigarette smoking, this being a shortcoming of the therapy. Here, we demonstrate that α-lactalbumin/polyethylene oxide (ALA/PEO) electrospun nanofibers constitute an efficient oromucosal delivery system for fast-onset nicotine delivery of high relevance for acute dosing NRT applications. In vitro, nicotine-loaded nanofibers showed fast disintegration in water, with a weight loss up to 40% within minutes, and a faster nicotine release (26.1 ± 4.6% after 1 min of incubation) of the loaded nicotine compared to two relevant marketed NRT formulations with a comparable nicotine dose (i.e., 7.9 ± 5.1 and 2.2 ± 0.3% nicotine was released from a lozenge and a sublingual tablet, respectively). Model-fitting of the release data indicated that the release mechanism of nicotine from the hydrophilic nanofibers was possibly governed by more than one type of release phenomena. Remarkably, ex vivo studies using porcine buccal mucosa demonstrated a more efficient permeation of the nicotine released from the nanofibers [flux of 1.06 ± 0.22 nmol/(cm2·min)] compared to when dosing even a ten-fold concentrated nicotine solution [flux of 0.17 ± 0.14 nmol/(cm2·min)]. Moreover, matrix-assisted laser desorption ionization mass spectrometry imaging (MALDI MS) imaging of ex vivo porcine buccal mucosa exposed to nicotine-loaded nanofibers clearly revealed higher amounts of nicotine throughout the epithelium, as well as in the lamina propria and submucosa of the tissue. Our findings suggest that nicotine-loaded ALA/PEO nanofibers have potential as a mucosal, fast-releasing, and biocompatible delivery system for nicotine, which can overcome the limitations of the currently marketed NRTs.

Amphiphilic-DNA Platform for the Design of Crystalline Frameworks with Programmable Structure and Functionality.

The reliable preparation of functional, ordered, nanostructured frameworks would be a game changer for many emerging technologies, from energy storage to nanomedicine. Underpinned by the excellent molecular recognition of nucleic acids, along with their facile synthesis and breadth of available functionalizations, DNA nanotechnology is widely acknowledged as a prime route for the rational design of nanostructured materials. Yet, the preparation of crystalline DNA frameworks with programmable structure and functionality remains a challenge. Here we demonstrate the potential of simple amphiphilic DNA motifs, dubbed "C-stars", as a versatile platform for the design of programmable DNA crystals. In contrast to all-DNA materials, in which structure depends on the precise molecular details of individual building blocks, the self-assembly of C-stars is controlled uniquely by their topology and symmetry. Exploiting this robust self-assembly principle, we design a range of topologically identical, but structurally and chemically distinct C-stars that following a one-pot reaction self-assemble into highly porous, functional, crystalline frameworks. Simple design variations allow us to fine-tune the lattice parameter and thus control the partitioning of macromolecules within the frameworks, embed responsive motifs that can induce isothermal disassembly, and include chemical moieties to capture target proteins specifically and reversibly.

Interaction with prefibrillar species and amyloid-like fibrils changes the stiffness of lipid bilayers.

Evaluating the toxicity of self-assembled protein states is a key step towards developing effective strategies against amyloidogenic pathologies such as Alzheimer's and Parkinson's diseases. Such analysis is directly connected to quantitatively probing the stability of the cellular membrane upon interaction with different protein states. Using a combination of spectroscopic techniques, morphological observations, and spectral analysis of membrane fluctuations, we identify different destabilisation routes for giant unilamellar vesicles interacting with native-like states, prefibrillar species and amyloid-like fibrils of α-lactalbumin. These effects range from substantially lowering the bending rigidity of the membranes to irreversible structural changes and complete disruption of the lipid bilayers. Our findings clearly indicate how the wide heterogeneity in structures occurring during protein aggregation can result in different destabilisation pathways, acting on different length scales and not limited to enhanced membrane permeability.

Protein/lipid coaggregates are formed during α-synuclein-induced disruption of lipid bilayers.

Amyloid formation is associated with neurodegenerative diseases such as Parkinson's disease (PD). Significant α-synuclein (αSN) deposition in lipid-rich Lewy bodies is a hallmark of PD. Nonetheless, an unraveling of the connection between neurodegeneration and amyloid fibrils, including the molecular mechanisms behind potential amyloid-mediated toxic effects, is still missing. Interaction between amyloid aggregates and the lipid cell membrane is expected to play a key role in the disease progress. Here, we present experimental data based on hybrid analysis of two-photon-microscopy, solution small-angle X-ray scattering and circular dichroism data. Data show in real time changes in liposome morphology and stability upon protein addition and reveal that membrane disruption mediated by amyloidogenic αSN is associated with dehydration of anionic lipid membranes and stimulation of protein secondary structure. As a result of membrane fragmentation, soluble αSN:-lipid coaggregates are formed, hence, suggesting a novel molecular mechanism behind PD amyloid cytotoxicity.

Exploring the effect of protein secondary structure on the solid state and physical stability of protein-based amorphous solid dispersions.

Amorphous solid dispersions (ASDs) using proteins as carriers have emerged as a promising strategy for stabilizing amorphous drug molecules. Proteins possess diverse three-dimensional structures that significantly influence their own properties and may also impact the properties of ASDs. We prepared ß-lactoglobulin (BLG) with different contents of ß-sheet and α-helical secondary structures by initially dissolving BLG in different mixed solvents, containing different ratios of water, methanol/ethanol, and acetic acid, followed by spray drying of the solutions. Our findings revealed that an increase in α-helical content resulted in a decrease in the glass transition temperature (Tg) of the protein. Subsequently, we utilized the corresponding mixed solvents to dissolve both BLG and the model drug celecoxib (CEL), allowing the preparation of ASDs containing either ß-sheet-rich or α-helix/random coil-rich BLG. Using spray drying, we successfully developed BLG-based ASDs with drug loadings ranging from 10 wt% to 90 wt%. At drug loadings below 40 wt%, samples prepared using both methods exhibited single-phase ASDs. However, heterogeneous systems formed when the drug loading exceeded 40 wt%. At higher drug loadings, physical stability assessments demonstrated that the α-helix/random coil-rich BLG structure exerted a more pronounced stabilizing effect on the drug-rich phase compared to the ß-sheet-rich BLG. Overall, our results highlight the importance of considering protein secondary structure in the design of ASDs.

Investigating the influence of protein secondary structure on the dissolution behavior of ß-lactoglobulin-based amorphous solid dispersions.

Proteins acting as carriers in amorphous solid dispersions (ASDs) demonstrate a notable sensitivity to the spray drying process, potentially leading to changes in their conformation. The main aim of this study was to investigate the dissolution performance of ASDs based on proteins with different content of secondary structures, specifically ß-sheet and α-helix structures. We prepared ß-sheet-rich and α-helix-rich ß-lactoglobulin (BLG), along with corresponding ASDs containing 10 wt% and 30 wt% drug loadings, through spray drying using celecoxib as the model drug. Circular dichroism and Fourier Transform Infrared Spectroscopy results revealed that even though changes in secondary structure were obtained in the spray-dried powders, the BLGs exhibited reversibility upon re-dissolving in phosphate buffer with varying pH levels. Both ß-sheet-rich BLG and α-helix-rich BLG exhibited enhanced dissolution rates and higher solubility in the media with pH values far from the isoelectric point (pI) of BLG (pH 2, 7, 8, and 9) compared to the pH closer to the pI (pH 3, 4, 5, and 6). Notably, the release rate and solubility of the drug and BLG from both types of BLG-based ASDs at 10 wt% drug loading were largely dependent on the solubility of pure SD-BLGs. α-helix-rich BLG-ASDs consistently exhibited equivalent or superior performance to ß-sheet-rich BLG-ASDs in terms of drug release rate and solubility, regardless of drug loading. Moreover, both types of BLG-based ASDs at 10 wt% drug loading exhibited faster release rates and higher solubility, for both the drug and BLG, compared to the ASDs at 30 wt% drug loading in pHs 2, 7, and 9 media.

Analysis of stabilization mechanisms in ß-lactoglobulin-based amorphous solid dispersions by experimental and computational approaches.

Our previous work shows that ß-lactoglobulin-stabilized amorphous solid dispersion (ASD) loaded with 70 % indomethacin remains stable for more than 12 months. The stability is probably due to hydrogen bond networks spread throughout the ASD, facilitated by the indomethacin which has both hydrogen donors and acceptors. To investigate the stabilization mechanisms further, here we tested five other drug molecules, including two without any hydrogen bond donors. A combination of experimental techniques (differential scanning calorimetry, X-ray power diffraction) and molecular dynamics simulations was used to find the maximum drug loadings for ASDs with furosemide, griseofulvin, ibuprofen, ketoconazole and rifaximin. This approach revealed the underlying stabilization factors and the capacity of computer simulations to predict ASD stability. We searched the ASD models for crystalline patterns, and analyzed diffusivity of the drug molecules and hydrogen bond formation. ASDs loaded with rifaximin and ketoconazole remained stable for at least 12 months, even at 90 % drug loading, whereas stable drug loadings for furosemide, griseofulvin and ibuprofen were at a maximum of 70, 50 and 40 %, respectively. Steric confinement and hydrogen bonding to the proteins were the most important stabilization mechanisms at low drug loadings (≤ 40 %). Inter-drug hydrogen bond networks (including those with induced donors), ionic interactions, and a high Tg of the drug molecule were additional factors stabilizing the ASDs at drug loading greater than 40 %.

Electrostatics controls the formation of amyloid superstructures in protein aggregation.

The possibility for proteins to aggregate in different superstructures, i.e. large-scale polymorphism, has been widely observed, but an understanding of the physicochemical mechanisms behind it is still out of reach. Here we present a theoretical model for the description of a generic aggregate formed from an ensemble of charged proteins. The model predicts the formation of multifractal structures with the geometry of the growth determined by the electrostatic interactions between single proteins. The model predictions are successfully verified in comparison with experimental curves for aggregate growth allowing us to reveal the mechanism of formation of such complex structures. The model is general and is able to predict aggregate morphologies occurring both in vivo and in vitro. Our findings provide a framework where the physical interactions between single proteins, the aggregate morphology, and the growth kinetics are connected into a single model in agreement with the experimental data.

Reproducible Formation of Insulin Superstructures: Amyloid-Like Fibrils, Spherulites, and Particulates.

Inducing protein aggregation in vitro under various formulation and stress conditions may lead to an increased understanding of the different association routes a protein can undergo. However, a range of factors can affect the aggregation process, often leading to heterogenous samples and experimental irreproducibility between labs. Here, we present detailed methods to reproducibly form homogenous samples of superstructures: amyloid-like fibrils, spherulites, and particulates from human insulin. We discuss pitfalls and good practice in the lab, with the aim of creating awareness on the potential sources of artefacts for protein stability and aggregation studies.

Carrier peptide interactions with liposome membranes induce reversible clustering by surface adsorption and shape deformation.

The cell-penetrating peptide penetratin and its analogues shuffle and penetramax have been used as carrier peptides for oral delivery of therapeutic peptides such as insulin. Their mechanism of action for this purpose is not fully understood but is believed to depend on the interactions of the peptide with the cell membrane. In the present study, peptide-liposome interactions were investigated using advanced biophysical techniques including small-angle neutron scattering and fluorescence lifetime imaging microscopy. Liposomes were used as a model system for the cell membrane. All the investigated carrier peptides induced liposome clustering at a specific peptide/lipid ratio. However, distinctively different types of membrane interactions were observed, as the liposome clustering was irreversible for penetratin, but fully or partly reversible for shuffle and penetramax, respectively. All three peptides were found to adsorb to the surface of the lipid bilayers, while only shuffle and penetramax led to shape deformation of the liposomes. Importantly, the peptide interactions did not disrupt the liposomes under any of the investigated conditions, which is advantageous for their application in drug delivery. This detailed insight on peptide-membrane interactions is important for understanding the mechanism of peptide-based excipients and the influence of peptide sequence modifications.

Identifying Biological and Biophysical Features of Different Maturation States of α-Synuclein Amyloid Fibrils.

Protein aggregates, hereunder amyloid fibrils, can undergo a maturation process, whereby early formed aggregates undergo a structural and physicochemical transition leading to more mature species. In the case of amyloid-related diseases, such maturation confers distinctive biological properties of the aggregates, which may account for a range of diverse pathological subtypes. Here, we present a protocol for the preparation of α-synuclein amyloid fibrils differing in the level of their maturation. We utilize widely accessible biophysical techniques to characterize the structure and morphology and a simple thermal treatment procedure to test their thermodynamic stability. Their biological properties are probed by means of binding to native plasma membrane sheets originating from mammalian cell lines.

Application of Low-Frequency Raman Spectroscopy to Probe Dynamics of Lipid Mesophase Transformations upon Hydration.

Low-frequency Raman (LFR) spectroscopy is presented as a viable tool for studying the hydration characteristics of lyotropic liquid crystal systems herein. Monoolein was used as a model compound, and its structural changes were probed both in situ and ex situ which enabled a comparison between different hydration states. A custom-built instrumental configuration allowed the advantages of LFR spectroscopy to be utilized for dynamic hydration analysis. On the other hand, static measurements of equilibrated systems (i.e., with varied aqueous content) showcased the structural sensitivity of LFR spectroscopy. The subtle differences not intuitively observed between similar self-assembled architectures were distinguished by chemometric analysis that directly correlated with the results from small-angle X-ray scattering (SAXS), which is the current "gold standard" method for determining the structure of such materials.

In vitro and in vivo immunogenicity assessment of protein aggregate characteristics.

The immunogenicity risk of therapeutic protein aggregates has been extensively investigated over the past decades. While it is established that not all aggregates are equally immunogenic, the specific aggregate characteristics, which are most likely to induce an immune response, remain ambiguous. The aim of this study was to perform comprehensive in vitro and in vivo immunogenicity assessment of human insulin aggregates varying in size, structure and chemical modifications, while keeping other morphological characteristics constant. We found that flexible aggregates with highly altered secondary structure were most immunogenic in all setups, while compact aggregates with native-like structure were found to be immunogenic primarily in vivo. Moreover, sub-visible (1-100 µm) aggregates were found to be more immunogenic than sub-micron (0.1-1 µm) aggregates, while chemical modifications (deamidation, ethylation and covalent dimers) were not found to have any measurable impact on immunogenicity. The findings highlight the importance of utilizing aggregates varying in few characteristics for assessment of immunogenicity risk of specific morphological features and may provide a workflow for reliable particle analysis in biotherapeutics.

Sustainable soy protein microsponges for efficient removal of lead (II) from aqueous environments.

Protein-based materials recently emerged as good candidates for water cleaning applications, due to the large availability of the constituent material, their biocompatibility and the ease of preparation. In this work, new adsorbent biomaterials were created from Soy Protein Isolate (SPI) in aqueous solution using a simple environmentally friendly procedure. Protein microsponge-like structures were produced and characterized by means of spectroscopy and fluorescence microscopy methods. The efficiency of these structures in removing Pb2+ ions from aqueous solutions was evaluated by investigating the adsorption mechanisms. The molecular structure and, consequently, the physico-chemical properties of these aggregates can be readily tuned by selecting the pH of the solution during production. In particular, the presence of ß-structures typical of amyloids as well as an environment characterized by a lower dielectric constant seem to enhance metal binding affinity revealing that hydrophobicity and water accessibility of the material are key features affecting the adsorption efficiency. Presented results provide new knowledge on how raw plant proteins can be valorised for the production of new biomaterials. This may offer extraordinary opportunities towards the design and production of new tailorable biosorbents which can also be exploited for several cycles of purification with minimal reduction in performance. SYNOPSIS: Innovative, sustainable plant-protein biomaterials with tunable properties are presented as green solution for water purification from lead(II) and the structure-function relationship is discussed.