Transcriptomic Analysis of Mineralized Adipose-Derived Stem Cell Tissues for Calcific Valve Disease Modelling.

Calcific aortic valve disease (CAVD) is characterized by the fibrosis and mineralization of the aortic valve, which leads to aortic stenosis and heart failure. At the cellular level, this is due to the osteoblastic-like differentiation of valve interstitial cells (VICs), resulting in the calcification of the tissue. Unfortunately, human VICs are not readily available to study CAVD pathogenesis and the implicated mechanisms in vitro; however, adipose-derived stromal/stem cells (ASCs), carrying the patient's specific genomic features, have emerged as a promising cell source to model cardiovascular diseases due to their multipotent nature, availability, and patient-specific characteristics. In this study, we describe a comprehensive transcriptomic analysis of tissue-engineered, scaffold-free, ASC-embedded mineralized tissue sheets using bulk RNA sequencing. Bioinformatic and gene set enrichment analyses revealed the up-regulation of genes associated with the organization of the extracellular matrix (ECM), suggesting that the ECM could play a vital role in the enhanced mineralization observed in these tissue-engineered ASC-embedded sheets. Upon comparison with publicly available gene expression datasets from CAVD patients, striking similarities emerged regarding cardiovascular diseases and ECM functions, suggesting a potential link between ECM gene expression and CAVDs pathogenesis. A matrisome-related sub-analysis revealed the ECM microenvironment promotes the transcriptional activation of the master gene runt-related transcription factor 2 (RUNX2), which is essential in CAVD development. Tissue-engineered ASC-embedded sheets with enhanced mineralization could be a valuable tool for research and a promising avenue for the identification of more effective aortic valve replacement therapies.

A Nanoparticle Ink Allowing the High Precision Visualization of Tissue Engineered Scaffolds by MRI.

Hydrogels are widely used as cell scaffolds in several biomedical applications. Once implanted in vivo, cell scaffolds must often be visualized, and monitored overtime. However, cell scaffolds appear poorly contrasted in most biomedical imaging modalities such as magnetic resonance imaging (MRI). MRI is the imaging technique of choice for high-resolution visualization of low-density, water-rich tissues. Attempts to enhance hydrogel contrast in MRI are performed with "negative" contrast agents that produce several image artifacts impeding the delineation of the implant's contours. In this study, a magnetic ink based on ultra-small iron oxide nanoparticles (USPIONs; <5 nm diameter cores) is developed and integrated into biocompatible alginate hydrogel used in cell scaffolding applications. Relaxometric properties of the magnetic hydrogel are measured, as well as biocompatibility and MR-visibility (T1 -weighted mode; in vitro and in vivo). A 2-week MR follow-up study is performed in the mouse model, demonstrating no image artifacts, and the retention of "positive" contrast overtime, which allows very precise delineation of tissue grafts with MRI. Finally, a 3D-contouring procedure developed to facilitate graft delineation and geometrical conformity assessment is applied on an inverted template alginate pore network. This proof-of-concept establishes the possibility to reveal precisely engineered hydrogel structures using this USPIONs ink high-visibility approach.

Informing a Canadian Skin Science Trainee Program Based on the State of Trainee Programs Offered by International Academic Societies.

BACKGROUND: For dermatology to effectively address the ever-growing medical needs, longstanding communication barriers across investigators working in different research pillars and practicing clinicians must be improved. To address this problem, trainee-specific programs are now evolving to align their educational landscape across basic science, translational and clinical research programs. OBJECTIVES: To establish a Skin Investigation Network of Canada (SkIN Canada) training roadmap for the career and skill development of future clinicians, clinican scientists and basic scientists in Canada. This Working Group aims to strengthen and harmonize collaborations and capacity across the skin research community. METHODS: The Working Group conducted a search of established international academic societies which offered trainee programs with mandates similar to SkIN Canada. Societies' program items and meetings were evaluated by use of an interview survey and/or the collection of publicly available data. Program logistics, objectives and feedback were assessed for commonalities and factors reported or determined to improve trainee experience. RESULTS: Through the various factors explored, the Working Group discovered the need for increasing program accessibility, creating opportunities for soft skill development, emphasizing the importance of current challenges, collecting and responding to feedback, and improving knowledge sharing to bridge pillars of skin research. CONCLUSIONS: Although improvements have been made to trainee education in recent years, a plurality of approaches exist and many of the underlying roadblocks remain unresolved. To establish fundamental clinician-basic scientist collaboration and training efforts, this Working Group highlights important factors to include and consider in building a trainee program and emphasizes the importance of trainee education.

Top Ten Research Priorities for Psoriasis, Atopic Dermatitis and Hidradenitis Suppurativa: The SkIN Canada Priority Setting Initiative.

BACKGROUND: The Skin Investigation Network of Canada (SkIN Canada) is a new national skin research network. To shape the research landscape and ensure its value to patient care, research priorities that are important to patients, caregivers, and health care providers must be identified. OBJECTIVES: To identify the Top Ten research priorities for 9 key skin conditions. METHODS: We first surveyed health care providers and researchers to select the top skin conditions for future research within the categories of inflammatory skin disease, skin cancers (other than melanoma), and wound healing. For those selected skin conditions, we conducted scoping reviews to identify previous priority setting exercises. We combined the results of those scoping reviews with a survey of patients, health care providers, and researchers to generate lists of knowledge gaps for each condition. We then surveyed patients and health care providers to create preliminary rankings to prioritize those knowledge gaps. Finally, we conducted workshops of patients and health care providers to create the final Top Ten lists of research priorities for each condition. RESULTS: Overall, 538 patients, health care providers, and researchers participated in at least one survey or workshop. Psoriasis, atopic dermatitis and hidradenitis suppurativa (inflammatory skin disease); chronic wounds, burns and scars (wound healing); and basal cell, squamous cell and Merkel cell carcinoma (skin cancer) were selected as priority skin conditions. Top Ten lists of knowledge gaps for inflammatory skin conditions encompassed a range of issues relevant to patient care, including questions on pathogenesis, prevention, non-pharmacologic and pharmacologic management. CONCLUSIONS: Research priorities derived from patients and health care providers should be used to guide multidisciplinary research networks, funders, and policymakers in Canada and internationally.

Production of Tissue-Engineered Skin Substitutes for Clinical Applications: Elimination of Serum.

Tissue-engineered skin substitutes (TESs) are used as a treatment for severe burn injuries. Their production requires culturing both keratinocytes and fibroblasts. The methods to grow these cells have evolved over the years, but bovine serum is still commonly used in the culture medium. Because of the drawbacks associated with the use of serum, it would be advantageous to use serum-free media for the production of TESs. In a previous study, we developed a serum-free medium (Surge SFM) for the culture of keratinocytes. Herein, we tested the use of this medium, together with a commercially available serum-free medium for fibroblasts (Prime XV), to produce serum-free TESs. Our results show that serum-free TESs are macroscopically and histologically similar to skin substitutes produced with conventional serum-containing media. TESs produced with either culture media expressed keratin 14, Ki-67, transglutaminase 1, filaggrin, type I and IV collagen, and fibronectin comparably. Mechanical properties, such as contraction and tensile strength, were comparable between TESs cultured with and without serum. Serum-free TESs were also successfully grafted onto athymic mice for a six-month period. In conclusion, Surge SFM and Prime XV serum-free media could be used to produce high quality clinical-grade skin substitutes.

A Newly Developed Chemically Defined Serum-Free Medium Suitable for Human Primary Keratinocyte Culture and Tissue Engineering Applications.

In our experience, keratinocytes cultured in feeder-free conditions and in commercially available defined and serum-free media cannot be as efficiently massively expanded as their counterparts grown in conventional bovine serum-containing medium, nor can they properly form a stratified epidermis in a skin substitute model. We thus tested a new chemically defined serum-free medium, which we developed for massive human primary keratinocyte expansion and skin substitute production. Our medium, named Surge Serum-Free Medium (Surge SFM), was developed to be used alongside a feeder layer. It supports the growth of keratinocytes freshly isolated from a skin biopsy and cryopreserved primary keratinocytes in cultured monolayers over multiple passages. We also show that keratin-19-positive epithelial stem cells are retained through serial passaging in Surge SFM cultures. Transcriptomic analyses suggest that gene expression is similar between keratinocytes cultured with either Surge SFM or the conventional serum-containing medium. Additionally, Surge SFM can be used to produce bilayered self-assembled skin substitutes histologically similar to those produced using serum-containing medium. Furthermore, these substitutes were grafted onto athymic mice and persisted for up to six months. In conclusion, our new chemically defined serum-free keratinocyte culture medium shows great promise for basic research and clinical applications.

Evaluation of a Serum-Free Medium for Human Epithelial and Stromal Cell Culture.

Over the past decade, growing demand from many domains (research, cosmetics, pharmaceutical industries, etc.) has given rise to significant expansion of the number of in vitro cell cultures. Despite the widespread use of fetal bovine serum, many issues remain. Among them, the whole constitution of most serums remains unknown and is subject to significant variations. Furthermore, the presence of potential contamination and xenogeny elements is challenging for clinical applications, while limited production is an obstacle to the growing demand. To circumvent these issues, a Serum-Free Medium (SFM) has been developed to culture dermal and vesical fibroblasts and their corresponding epithelial cells, namely, keratinocytes and urothelial cells. To assess the impact of SFM on these cells, proliferation, clonogenic and metabolic assays have been compared over three passages to conditions associated with the use of a classic Fetal Bovine Serum-Containing Medium (FBSCM). The results showed that the SFM enabled fibroblast and epithelial cell proliferation while maintaining a morphology, cell size and metabolism similar to those of FBSCM. SFM has repeatedly been found to be better suited for epithelial cell proliferation and clonogenicity. Fibroblasts and epithelial cells also showed more significant mitochondrial metabolism in the SFM compared to the FBSCM condition. However, the SFM may need further optimization to improve fibroblast proliferation.

Preclinical Evaluation of BMP-9-Treated Human Bone-like Substitutes for Alveolar Ridge Preservation following Tooth Extraction.

The success of dental implant treatment after tooth extraction is generally maximized by preserving the alveolar ridge using cell-free biomaterials. However, these treatments can be associated with inflammatory reactions, leading to additional bone volume loss hampering dental implant positioning. Our group developed a self-assembled bone-like substitute constituted of osteogenically induced human adipose-derived stromal/stem cells (hASCs). We hypothesized that a bone morphogenetic protein (BMP) supplementation could improve the in vitro osteogenic potential of the bone-like substitute, which would subsequently translate into enhanced alveolar bone healing after tooth extraction. ASCs displayed a better osteogenic response to BMP-9 than to BMP-2 in monolayer cell culture, as shown by higher transcript levels of the osteogenic markers RUNX2, osterix (OSX/SP7), and alkaline phosphatase after three and six days of treatment. Interestingly, BMP-9 treatment significantly increased OSX transcripts and alkaline phosphatase activity, as well as pro-angiogenic angiopoietin-1 gene expression, in engineered bone-like substitutes after 21 days of culture. Alveolar bone healing was investigated after molar extraction in nude rats. Microcomputed tomography and histological evaluations revealed similar, or even superior, global alveolar bone preservation when defects were filled with BMP-9-treated bone-like substitutes for ten weeks compared to a clinical-grade biomaterial, with adequate gingival re-epithelialization in the absence of resorption.

Biofabrication of Sodium Alginate Hydrogel Scaffolds for Heart Valve Tissue Engineering.

Every year, thousands of aortic valve replacements must take place due to valve diseases. Tissue-engineered heart valves represent promising valve substitutes with remodeling, regeneration, and growth capabilities. However, the accurate reproduction of the complex three-dimensional (3D) anatomy of the aortic valve remains a challenge for current biofabrication methods. We present a novel technique for rapid fabrication of native-like tricuspid aortic valve scaffolds made of an alginate-based hydrogel. Using this technique, a sodium alginate hydrogel formulation is injected into a mold produced using a custom-made sugar glass 3D printer. The mold is then dissolved using a custom-made dissolving module, revealing the aortic valve scaffold. To assess the reproducibility of the technique, three scaffolds were thoroughly compared. CT (computed tomography) scans showed that the scaffolds respect the complex native geometry with minimal variations. The scaffolds were then tested in a cardiac bioreactor specially designed to reproduce physiological flow and pressure (aortic and ventricular) conditions. The flow and pressure profiles were similar to the physiological ones for the three valve scaffolds, with small variabilities. These early results establish the functional repeatability of this new biofabrication method and suggest its application for rapid fabrication of ready-to-use cell-seeded sodium alginate scaffolds for heart valve tissue engineering.

Workshop to address gaps in regulation of minimally manipulated autologous cell therapies for homologous use in Canada.

In Canada, minimally manipulated autologous cell therapies for homologous use (MMAC-H) are either regulated under the practice of medicine, or as drugs or devices under the Food and Drugs Act, Food and Drug Regulations (F&DR) or Medical Device Regulations (MDR). Cells, Tissues and Organs (CTO) Regulations in Canada are restricted to minimally manipulated allogeneic products for homologous use. This leaves an important gap in the interpretation of existing regulations. The purposes of this workshop co-organized by the Stem Cell Network and the Centre for Commercialization of Regenerative Medicine (CCRM) were to discuss the current state of regulation of MMAC-H therapies in Canada and compare it with other regulatory jurisdictions, with the intent of providing specific policy recommendations to Health Canada. Participants came to a consensus on the need for well-defined common terminology between regulators and stakeholders, a common source of confusion and misinformation. A need for a harmonized national approach to oversight of facilities providing MMAC-H therapies based on existing standards, such as Canadian Standards Association (CSA), was also voiced. Facilities providing MMAC-H therapies should also participate in collection of long-term data to ensure patient safety and efficacy of therapies. Harmonization across provinces of the procedures and practices involving administration of MMAC-H would be preferred. Participants felt that devices used to process MMAC-H are adequately regulated under existing MDR. Overly prescriptive regulation will stifle innovation, whereas insufficient regulation might allow unsafe or ineffective therapies to be offered. Until a clear, balanced and explicit approach is articulated, regulatory uncertainty remains a barrier.

Melatonin pretreatment of human adipose tissue-derived mesenchymal stromal cells enhances their prosurvival and protective effects on human kidney cells.

The efficacy of cell therapy for many diseases can be limited by the poor survival of implanted cells in an environment of tissue injury. Melatonin has been reported to have antioxidative and antiapoptotic effects. Adipose tissue-derived mesenchymal stromal cells (ASCs), cells easily obtained in high amounts and with minimal discomfort, have shown great promise in cell therapy applications, such as in acute kidney injury. We hypothesized that melatonin pretreatment of human ASCs (hASCs) would improve their renoprotective and prosurvival effects. We therefore investigated the action of melatonin on hASCs, as well as the effect of the resulting hASCs-conditioned media (CM) on human kidney cells exposed to oxidative and apoptotic injury-provoking doses of cisplatin. Our results demonstrated that pretreatment of hASCs with melatonin, 100 µM for 3 h, significantly increased their proliferation and their expression of prosurvival P-Erk1/2 and P-Akt, and of antioxidative enzymes catalase and heme oxygenase (HO)-1. In addition, the CM from hASCs pretreated with melatonin provoked a significantly higher proliferation and migration of HK-2 human kidney epithelial cells. Furthermore, this CM exerted significantly higher prosurvival and antiapoptotic actions on HK-2 cells exposed to cisplatin in vitro. Western blot analysis showed higher expression of P-Erk1/2, Bcl-2, SOD-1, and HO-1 in the HK-2 cells exposed to cisplatin in the presence of CM from melatonin-pretreated hASCs. In sum, our study revealed that in vitro pretreatment of hASCs with melatonin may significantly enhance their survival and their therapeutic effectiveness on injured tissue.

Using human umbilical cord cells for tissue engineering: a comparison with skin cells.

The epithelial cells and Wharton׳s jelly cells (WJC) from the human umbilical cord have yet to be extensively studied in respect to their capacity to generate tissue-engineered substitutes for clinical applications. Our reconstruction strategy, based on the self-assembly approach of tissue engineering, allows the production of various types of living human tissues such as skin and cornea from a wide range of cell types originating from post-natal tissue sources. Here we placed epithelial cells and WJC from the umbilical cord in the context of a reconstructed skin substitute in combination with skin keratinocytes and fibroblasts. We compared the ability of the epithelial cells from both sources to generate a stratified, differentiated skin-like epithelium upon exposure to air when cultured on the two stromal cell types. Conversely, the ability of the WJC to behave as dermal fibroblasts, producing extracellular matrix and supporting the formation of a differentiated epithelium for both types of epithelial cells, was also investigated. Of the four types of constructs produced, the combination of WJC and keratinocytes was the most similar to skin engineered from dermal fibroblasts and keratinocytes. When cultured on dermal fibroblasts, the cord epithelial cells were able to differentiate in vitro into a stratified multilayered epithelium expressing molecules characteristic of keratinocyte differentiation after exposure to air, and maintaining the expression of keratins K18 and K19, typical of the umbilical cord epithelium. WJC were able to support the growth and differentiation of keratinocytes, especially at the early stages of air-liquid culture. In contrast, cord epithelial cells cultured on WJC did not form a differentiated epidermis when exposed to air. These results support the premise that the tissue from which cells originate can largely affect the properties and homoeostasis of reconstructed substitutes featuring both epithelial and stromal compartments.

Improving Cutaneous Wound Healing in Diabetic Mice Using Naturally Derived Tissue-Engineered Biological Dressings Produced under Serum-Free Conditions.

Long-term diabetes often leads to chronic wounds refractory to treatment. Cell-based therapies are actively investigated to enhance cutaneous healing. Various cell types are available to produce biological dressings, such as adipose-derived stem/stromal cells (ASCs), an attractive cell source considering their abundancy, accessibility, and therapeutic secretome. In this study, we produced human ASC-based dressings under a serum-free culture system using the self-assembly approach of tissue engineering. The dressings were applied every 4 days to full-thickness 8-mm splinted skin wounds created on the back of polygenic diabetic NONcNZO10/LtJ mice and streptozotocin-induced diabetic K14-H2B-GFP mice. Global wound closure kinetics evaluated macroscopically showed accelerated wound closure in both murine models, especially for NONcNZO10/LtJ; the treated group reaching 98.7% ± 2.3% global closure compared to 76.4% ± 11.8% for the untreated group on day 20 (p=0.0002). Histological analyses revealed that treated wounds exhibited healed skin of better quality with a well-differentiated epidermis and a more organized, homogeneous, and 1.6-fold thicker granulation tissue. Neovascularization, assessed by CD31 labeling, was 2.5-fold higher for the NONcNZO10/LtJ treated wounds. We thus describe the beneficial impact on wound healing of biologically active ASC-based dressings produced under an entirely serum-free production system facilitating clinical translation.

Harvesting the potential of the human umbilical cord: isolation and characterisation of four cell types for tissue engineering applications.

The human umbilical cord (UC) has attracted interest as a source of cells for many research applications. UC solid tissues contain four cell types: epithelial, stromal, smooth muscle and endothelial cells. We have developed a unique protocol for the sequential extraction of all four cell types from a single UC, allowing tissue reconstruction using multiple cell types from the same source. By combining perfusion, immersion and explant techniques, all four cell types have been successfully expanded in monolayer cultures. We have also characterised epithelial and Wharton's jelly cells (WJC) by immunolabelling of specific proteins. Epithelial cell yields averaged at 2.3 × 10(5) cells per centimetre UC, and the cells expressed an unusual combination of keratins typical of simple, mucous and stratified epithelia. Stromal cells in the Wharton's jelly expressed desmin, α-smooth muscle actin, elastin, keratins (K12, K16, K18 and K19), vimentin and collagens. Expression patterns in cultured cells resembled those found in situ except for basement membrane components and type III collagen. These stromal cells featured a sustained proliferation rate up to passage 12 after thawing. The mesenchymal stem cell (MSC) character of the WJC was confirmed by their expression of typical MSC surface markers and by adipogenic and osteogenic differentiation assays. To emphasise and demonstrate their potential for regenerative medicine, UC cell types were successfully used to produce human tissue-engineered constructs. Both bilayered stromal/epithelial and vascular substitutes were produced, establishing the versatility and importance of these cells for research and therapeutic applications.

Assessment of antibacterial properties and skin irritation potential of anodized aluminum impregnated with various quaternary ammonium.

The importance of the inert environment in the transmission of pathogens has been reassessed in recent years. To reduce cross-contamination, new biocidal materials used in high touch surfaces (e.g., stair railings, door handles) have been developed. However, their impact on skin remains poorly described. The present study aimed to evaluate the antibacterial properties and the risk of skin irritation of two materials based on hard-anodized aluminum (AA) impregnated with quaternary ammonium compound solutions (QAC#1 or QAC#2). The QAC#1 or QAC#2 solutions vary in composition, QAC#2 being free of dioctyl dimethyl ammonium chloride (Dio-DAC) and octyl decyl dimethyl ammonium chloride (ODDAC). Unlike AA used as a control, both AA-QAC#1 and AA-QAC#2 had excellent and rapid antibacterial efficacy, killing 99.9 % of Staphylococcus aureus and Escherichia coli bacteria, in 15 s and 1 min, respectively. The impregnation solutions (QAC#1 and QAC#2) did not show any skin sensitizing effect on transformed human keratinocytes. Nevertheless, these solutions as well as the materials (AA-QAC#1, AA-QAC#2), and the liquid extracts derived from them, induced a very rapid cytotoxicity on L929 murine fibroblasts (>70 % after 1 h of contact) as shown by LDH, MTS and neutral red assays. This cytotoxicity can be explained by the fast QACs release occurring when AA-QAC#1 and AA-QAC#2 were immersed in aqueous medium. To overcome the limitation of assays based on liquid condition, an in vitro skin irritation assay on reconstructed human epidermis (RHE) was developed. The effect of the materials upon their direct contact with the epidermis grown at the liquid-air interface was determined by evaluating tissue viability and quantifying interleukin-1 alpha (IL-1α) which is released in skin during injury or infection. AA-QAC#1 induced a significant decrease in RHE viability, close to OECD and ISO 10993-10 acceptability thresholds and enhanced the pro-inflammatory IL-1α secretion compared with AA-QAC#2. Finally, these results were corroborated by in vivo assays on mice using erythema and edema visual scores, histological observations, and epidermal thickness measurement. AA had no effect on the skin, while a stronger irritation was induced by AA-QAC#1 compared with AA-QAC#2. Hence, these materials were classified as moderate and slight irritants, respectively. In summary, this study revealed that AA-QAC#2 without Dio-DAC and ODDAC could be a great candidate for high touch surface applications, showing an extremely effective and rapid bactericidal activity, without inducing adverse effects for skin tissue.

Engineered human organ-specific urethra as a functional substitute.

Urologic patients may be affected by pathologies requiring surgical reconstruction to re-establish a normal function. The lack of autologous tissues to reconstruct the urethra led clinicians toward new solutions, such as tissue engineering. Tridimensional tissues were produced and characterized from a clinical perspective. The balance was optimized between increasing the mechanical resistance of urethral-engineered tissue and preserving the urothelium's barrier function, essential to avoid urine extravasation and subsequent inflammation and fibrosis. The substitutes produced using a mix of vesical (VF) and dermal fibroblasts (DF) in either 90%:10% or 80%:20% showed mechanical resistance values comparable to human native bladder tissue while maintaining functionality. The presence of mature urothelium markers such as uroplakins and tight junctions were documented. All substitutes showed similar histological features except for the noticeable decrease in polysaccharide globules for the substitutes made with a higher proportion of DF. The degree of maturation evaluated with electron microscopy was positively correlated with the increased concentration of VF in the stroma. Substitutes produced with VF and at least 10% of DF showed sufficient mechanical resistance to withstand surgeon manipulation and high functionality, which may improve long-term patients' quality of life, representing a great future alternative to current treatments.

Fibrillin-1 regulates white adipose tissue development, homeostasis, and function.

Fibrillin-1 is an extracellular glycoprotein present throughout the body. Mutations in fibrillin-1 cause a wide spectrum of type I fibrillinopathies, including Marfan syndrome characterized by clinical manifestations in adipose tissues, among others. This study addresses the hypothesis that fibrillin-1 regulates adipocyte development and plays a vital role in adipose tissue homeostasis. We employed two mouse models - Fbn1mgR/mgR (20-25% of normal fibrillin-1) and Fbn1C1041G/+ (missense mutation in fibrillin-1) to examine the role of fibrillin-1 in adipose tissue development and homeostasis. Fibrillin-1 was detected around mature adipocytes in both mouse and human white adipose tissues. As expected, Fbn1mgR/mgR mice displayed a significant reduction of fibrillin-1 in white adipose tissue, and no change was observed for Fbn1C1041G/+ mice, each compared to their respective littermates. Male Fbn1mgR/mgR mice had more white and brown adipose tissues, whereas female Fbn1mgR/mgR and both male and female Fbn1C1041G/+ showed no difference compared to their respective wild-type littermates. Consistent with this data, male Fbn1mgR/mgR mice displayed hyperinsulinemia and an insulin resistance phenotype with higher levels of cholesterol and high-density lipoproteins in the serum. Fibrillin-1 deficiency in male Fbn1mgR/mgR mice also promoted adipogenic gene expression and led to hypertrophic expansion of mature adipocytes. To further elucidate the fibrillin-1-dependent adipogenic mechanisms in cell culture, we used primary bone marrow derived mesenchymal stem/stromal cells (MSCs) from Fbn1mgR/mgR, Fbn1C1041G/+ and wild-type mice. Increased lipid content, adipogenic differentiation and pAKT levels were observed when MSCs from both male and female Fbn1mgR/mgR mice were differentiated. Furthermore, a recombinant fragment spanning the C-terminal half of fibrillin-1 significantly reduced adipocyte differentiation i) by binding to MSCs and inhibiting adipogenic commitment, and ii) by sequestering insulin, together suppressing the AKT signaling pathway. This fibrillin-1 fragment also rescued enhanced adipogenic differentiation of MSCs derived from Fbn1mgR/mgR mice. Overall, this study shows that altered adipose tissue homeostasis observed in fibrillin-1 deficient mice depends on the type of fibrillin-1 deficiency and the biological sex, and it shows that fibrillin-1 is a negative regulator of adipogenesis.

α-Linolenic acid and linoleic acid modulate the lipidome and the skin barrier of a tissue-engineered skin model.

Polyunsaturated fatty acids (PUFAs) play an important role in the establishment and the maintenance of the skin barrier function. However, the impact of their derived lipid mediators remains unclear. Skin substitutes were engineered according to the self-assembly method with a culture medium supplemented with 10 µM of both α-linolenic acid (ALA) and linoleic acid (LA). The supplementation with ALA and LA decreased testosterone absorption through a tissue-engineered reconstructed skin model, thus indicating an improved skin barrier function following supplementation. The exogenously provided fatty acids were incorporated into the phospholipid and triglyceride fractions of the skin substitutes. Indeed, the dual supplementation increased the levels of eicosapentaenoic acid (EPA) (15-fold), docosapentaenoic acid (DPA) (3-fold), and LA (1.5-fold) in the epidermal phospholipids while it increased the levels of ALA (>20-fold), DPA (3-fold) and LA (1.5-fold) in the epidermal triglycerides. The bioactive lipid mediator profile of the skin substitutes, including prostaglandins, hydroxy-fatty acids, N-acylethanolamines and monoacylglycerols, was next analyzed using liquid chromatography-tandem mass spectrometry. The lipid supplementation further modulated bioactive lipid mediator levels of the reconstructed skin substitutes, leading to a lipid mediator profile more representative of the one found in normal human skin. These findings show that an optimized supply of PUFAs via culture media is essential for the establishment of improved barrier function in vitro. STATEMENT OF SIGNIFICANCE: Supplementation of the culture medium with 10 µM of both α-linolenic acid (ALA) and linoleic acid (LA) improved the skin barrier function of a tissue-engineered skin model. The exogenously provided fatty acids were incorporated into the phospholipid and triglyceride fractions of the skin substitutes and further modulated bioactive lipid mediator levels, including prostaglandins, hydroxy-fatty acids, N-acylethanolamines and monoacylglycerols. These findings highlight the important role of ALA and LA in skin homeostasis and show that an optimized supply of polyunsaturated fatty acids via culture media is essential for the establishment of improved barrier function in vitro.

High-Intensity Laser Therapy (HILT) as an Emerging Treatment for Vulvodynia and Chronic Musculoskeletal Pain Disorders: A Systematic Review of Treatment Efficacy.

High-intensity laser therapy (HILT) has been gaining popularity in the treatment of chronic musculoskeletal pain, including vulvodynia. The objective of this study was to critically appraise and synthesize the available evidence on the efficacy of HILT for reducing pain and improving function in vulvodynia and other chronic primary musculoskeletal pain conditions. Electronic databases and the grey literature were searched. Effects on pain intensity, function, and adverse events were assessed. One study investigating HILT in the treatment of vulvodynia and 13 studies on the treatment of chronic musculoskeletal pain were selected. The study assessing vulvodynia showed favorable results for reducing pain. Regarding chronic musculoskeletal pain, 12 out of the 13 studies selected consistently showed that HILT was more effective than the placebo/active comparator for reducing pain and improving function. The available effect sizes for pain showed large to huge effects. Similar effects were observed for function except for two studies showing moderate effects. The GRADE score was moderate. Conclusions: There are insufficient data to support the use of HILT in vulvodynia, but the promising results encourage further research. HILT appears to be effective in musculoskeletal pain conditions. More high-quality studies are needed to identify effective laser protocols.

Engineering naturally-derived human connective tissues for clinical applications using a serum-free production system.

The increasing need for tissue substitutes in reconstructive surgery spurs the development of engineering methods suited for clinical applications. Cell culture and tissue production traditionally require the use of fetal bovine serum (FBS) which is associated with various complications especially from a translational perspective. Using the self-assembly approach of tissue engineering, we hypothesized that all important parameters of tissue reconstruction can be maintained in a production system devoid of FBS from cell extraction to tissue reconstruction. We studied two commercially available serum-free medium (SFM) and xenogen-free serum-free medium (XSFM) for their impact on tissue reconstruction using human adipose-derived stem/stromal cells (ASCs) in comparison to serum-containing medium. Both media allowed higher ASC proliferation rates in primary cultures over five passages compared with 10% FBS supplemented medium while maintaining high expression of mesenchymal cell markers. For both media, we evaluated extracellular matrix production and deposition necessary to engineer manipulatable tissues using the self-assembly approach. Tissues produced in SFM exhibited a significantly increased thickness (up to 6.8-fold) compared with XSFM and FBS-containing medium. A detailed characterization of tissues produced under SFM conditions showed a substantial 50% reduction of production time without compromising key tissue features such as thickness, mechanical resistance and pro-angiogenic secretory capacities (plasminogen activator inhibitor 1, hepatocyte growth factor, vascular endothelial growth factor, angiopoietin-1) when compared to tissues produced in the control FBS-containing medium. Furthermore, we compared ASCs to the frequently used human dermal fibroblasts (DFs) in the SFM culture system. ASC-derived tissues displayed a 2.4-fold increased thickness compared to their DFs counterparts. In summary, we developed all-natural human substitutes using a production system compatible with clinical requirements. Under culture conditions devoid of bovine serum, the resulting engineered tissues displayed similar and even superior structural and functional properties over the classic FBS-containing culture conditions with a considerable 50% shortening of production time.