A General Concept for the Electronic and Steric Modification of 1-Metallacyclobuta-2,3-dienes: A Case Study of Group 4 Metallocene Complexes.

The synthesis of group 4 metal 1-metallacyclobuta-2,3-dienes as organometallic analogues of elusive 1,2-cyclobutadiene has so far been limited to SiMe3 substituted examples. We present the synthesis of two Ph substituted dilithiated ligand precursors for the preparation of four new 1-metallacyclobuta-2,3-dienes [rac-(ebthi)M] (M=Ti, Zr; ebthi=1,2-ethylene-1,10-bis(η5-tetrahydroindenyl)). The organolithium compounds [Li2(RC3Ph)] (1 b: R=Ph, 1 c: R=SiMe3) as well as the metallacycles of the general formula [rac-(ebthi)M(R1C3R2)] (2 b: M=Ti, R1=R2=Ph, 2 c: M=Ti, R1=Ph, R2=SiMe3; 3 b: M=Zr, R1=R2=Ph; 3 c: M=Zr, R1=Ph, R2=SiMe3) were fully characterised. Single crystal X-ray diffraction and quantum chemical bond analysis of the Ti and Zr complexes reveal ligand influence on the biradicaloid character of the titanocene complexes. X-band EPR spectroscopy of structurally similar Ti complexes [rac-(ebthi)Ti(Me3SiC3SiMe3)] (2 a), 2 b, and 2 c was carried out to evaluate the accessibility of an EPR active triplet state. Cyclic voltammetry shows that introduction of Ph groups renders the complexes easier to reduce. 13C CPMAS NMR analysis provides insights into the cause of the low field shift of the resonances of metal-bonded carbon atoms and provides evidence of the absence of the ß-C-Ti interaction.

TEMPO-Modified Polymethacrylates as Mediators in Electrosynthesis: Influence of the Molecular Weight on Redox Properties and Electrocatalytic Activity.

Homogeneous catalysts ("mediators") are frequently employed in organic electrosynthesis to control selectivity. Despite their advantages, they can have a negative influence on the overall energy and mass balance if used only once or recycled inefficiently. Polymediators are soluble redox-active polymers applicable as electrocatalysts, enabling recovery by dialysis or membrane filtration. Using anodic alcohol oxidation as an example, we have demonstrated that TEMPO-modified polymethacrylates (TPMA) can act as efficient and recyclable catalysts. In the present work, the influence of the molecular size on the redox properties and the catalytic activity was carefully elaborated using a series of TPMAs with well-defined molecular weight distributions. Cyclic voltammetry studies show that the polymer chain length has a pronounced impact on the key-properties. Together with preparative-scale electrolysis experiments, an optimum size range was identified for polymediator-guided sustainable reaction control.

Electrochemistry and Reactivity of Chelation-stabilized Hypervalent Bromine(III) Compounds.

Hypervalent bromine(III) reagents possess a higher electrophilicity and a stronger oxidizing power compared to their iodine(III) counterparts. Despite the superior reactivity, bromine(III) reagents have a reputation of hard-to-control and difficult-to-synthesize compounds. This is partly due to their low stability, and partly because their synthesis typically relies on the use of the toxic and highly reactive BrF3 as a precursor. Recently, we proposed chelation-stabilized hypervalent bromine(III) compounds as a possible solution to both problems. First, they can be conveniently prepared by electro-oxidation of the corresponding bromoarenes. Second, the chelation endows bromine(III) species with increased stability while retaining sufficient reactivity, comparable to that of iodine(III) counterparts. Finally, their intrinsic reactivity can be unlocked in the presence of acids. Herein, an in-depth mechanistic study of both the electrochemical generation and the reactivity of the bromine(III) compounds is disclosed, with implications for known applications and future developments in the field.

Molecular Catalysts for the Reductive Homocoupling of CO2 towards C2+ Compounds.

The conversion of CO2 into multicarbon (C2+ ) compounds by reductive homocoupling offers the possibility to transform renewable energy into chemical energy carriers and thereby create "carbon-neutral" fuels or other valuable products. Most available studies have employed heterogeneous metallic catalysts, but the use of molecular catalysts is still underexplored. However, several studies have already demonstrated the great potential of the molecular approach, namely, the possibility to gain a deep mechanistic understanding and a more precise control of the product selectivity. This Minireview summarizes recent progress in both the thermo- and electrochemical reductive homocoupling of CO2 toward C2+ products mediated by molecular catalysts. In addition, reductive CO homocoupling is discussed as a model for the further conversion of intermediates obtained from CO2 reduction, which may serve as a source of inspiration for developing novel molecular catalysts in the future.

Electrochemical Generation of Hypervalent Bromine(III) Compounds.

In sharp contrast to hypervalent iodine(III) compounds, the isoelectronic bromine(III) counterparts have been little studied to date. This knowledge gap is mainly attributed to the difficult-to-control reactivity of λ3 -bromanes as well as to their challenging preparation from the highly toxic and corrosive BrF3 precursor. In this context, we present a straightforward and scalable approach to chelation-stabilized λ3 -bromanes by anodic oxidation of parent aryl bromides possessing two coordinating hexafluoro-2-hydroxypropanyl substituents. A series of para-substituted λ3 -bromanes with remarkably high redox potentials spanning a range from 1.86 V to 2.60 V vs. Ag/AgNO3 was synthesized by the electrochemical method. We demonstrate that the intrinsic reactivity of the bench-stable bromine(III) species can be unlocked by addition of a Lewis or a Brønsted acid. The synthetic utility of the λ3 -bromane activation is exemplified by oxidative C-C, C-N, and C-O bond forming reactions.

Electrochemically Catalyzed Newman-Kwart Rearrangement: Mechanism, Structure-Reactivity Relationship, and Parallels to Photoredox Catalysis.

The facilitation of redox-neutral reactions by electrochemical injection of holes and electrons, also known as "electrochemical catalysis", is a little explored approach that has the potential to expand the scope of electrosynthesis immensely. To systematically improve existing protocols and to pave the way toward new developments, a better understanding of the underlying principles is crucial. In this context, we have studied the Newman-Kwart rearrangement of O-arylthiocarbamates to the corresponding S-aryl derivatives, the key step in the synthesis of thiophenols from the corresponding phenols. This transformation is a particularly useful example because the conventional method requires temperatures up to 300 °C, whereas electrochemical catalysis facilitates the reaction at room temperature. A combined experimental-quantum chemical approach revealed several reaction channels and rendered an explanation for the relationship between the structure and reactivity. Furthermore, it is shown how rapid cyclic voltammetry measurements can serve as a tool to predict the feasibility for specific substrates. The study also revealed distinct parallels to photoredox-catalyzed reactions, in which back-electron transfer and chain propagation are competing pathways.

Homogeneously Catalyzed Electroreduction of Carbon Dioxide-Methods, Mechanisms, and Catalysts.

The utilization of CO2 via electrochemical reduction constitutes a promising approach toward production of value-added chemicals or fuels using intermittent renewable energy sources. For this purpose, molecular electrocatalysts are frequently studied and the recent progress both in tuning of the catalytic properties and in mechanistic understanding is truly remarkable. While in earlier years research efforts were focused on complexes with rare metal centers such as Re, Ru, and Pd, the focus has recently shifted toward earth-abundant transition metals such as Mn, Fe, Co, and Ni. By application of appropriate ligands, these metals have been rendered more than competitive for CO2 reduction compared to the heavier homologues. In addition, the important roles of the second and outer coordination spheres in the catalytic processes have become apparent, and metal-ligand cooperativity has recently become a well-established tool for further tuning of the catalytic behavior. Surprising advances have also been made with very simple organocatalysts, although the mechanisms behind their reactivity are not yet entirely understood. Herein, the developments of the last three decades in electrocatalytic CO2 reduction with homogeneous catalysts are reviewed. A discussion of the underlying mechanistic principles is included along with a treatment of the experimental and computational techniques for mechanistic studies and catalyst benchmarking. Important catalyst families are discussed in detail with regard to mechanistic aspects, and recent advances in the field are highlighted.

Integrating Catalytic Processes and Modern Electrolyte Concepts into Electrosynthesis.

Electrosynthesis is frequently presented as an intrinsically sustainable, safe and efficient method. While this is indeed often the case, this assessment cannot be easily generalized, as a number of challenges need to be addressed on the way to more efficient and truly sustainable processes. These challenges comprise the necessity for employing large amounts of supporting electrolyte additives along with the concomitant separation and waste issues. A further problem is the kinetic inhibition of the heterogeneous electron exchange, which in many instances leads to a decreased selectivity and an increased energy consumption ( 'overpotential' ). Another challenge is the apparent restriction of electrosynthesis to redox reactions, which seems to exclude important redox-neutral processes such as rearrangements, cycloadditions and substitutions from the scope of applications. Herein, catalytic approaches and electrolyte concepts are presented, which can help to overcome the abovementioned issues. For illustration of the principles, examples from our recent research activities are used.

On the Use of Polyelectrolytes and Polymediators in Organic Electrosynthesis.

Although organic electrosynthesis is generally considered to be a green method, the necessity for excess amounts of supporting electrolyte constitutes a severe drawback. Furthermore, the employment of redox mediators results in an additional separation problem. In this context, we have explored the applicability of soluble polyelectrolytes and polymediators with the TEMPO-mediated transformation of alcohols into carbonyl compounds as a test reaction. Catalyst benchmarking based on cyclic voltammetry studies indicated that the redox-active polymer can compete with molecularly defined TEMPO species. Alcohol oxidation was also highly efficient on a preparative scale, and our polymer-based approach allowed for the separation of both mediator and supporting electrolyte in a single membrane filtration step. Moreover, we have shown that both components can be reused multiple times.

Synthesis of Benzoxazoles Using Electrochemically Generated Hypervalent Iodine.

The indirect ("ex-cell") electrochemical synthesis of benzoxazoles from imines using a redox mediator based on the iodine(I)/iodine(III) redox couple is reported. Tethering the redox-active iodophenyl subunit to a tetra-alkylammonium moiety allowed for anodic oxidation to be performed without supporting electrolyte. The mediator salt can be easily recovered and reused. Our "ex-cell" approach toward the electrosynthesis of benzoxazoles is compatible with a range of redox-sensitive functional groups. An unprecedented concerted reductive elimination mechanism for benzoxazole formation is proposed on the basis of control experiments and DFT calculations.

Redox catalysis in organic electrosynthesis: basic principles and recent developments.

Electroorganic synthesis has become an established, useful, and environmentally benign alternative to classic organic synthesis for the oxidation or the reduction of organic compounds. In this context, the use of redox mediators to achieve indirect processes is attaining increased significance, since it offers many advantages compared to a direct electrolysis. Kinetic inhibitions that are associated with the electron transfer at the electrode/electrolyte interface, for example, can be eliminated and higher or totally different selectivity can be achieved. In many cases, a mediated electron transfer can occur against a potential gradient, meaning that lower potentials are needed, reducing the probability of undesired side-reactions. In addition, the use of electron transfer mediators can help to avoid electrode passivation resulting from polymer film formation on the electrode surface. Although the principle of indirect electrolysis was established many years ago, new, exciting and useful developments continue to be made. In recent years, several new types of redox mediators have been designed and examined, a process that can be accomplished more efficiently and purposefully using modern computational tools. New protocols including, the development of double mediatory systems in biphasic media, enantioselective mediation and heterogeneous electrocatalysis using immobilized mediators have been established. Furthermore, the understanding of mediated electron transfer reaction mechanisms has advanced. This review describes progress in the field of electroorganic synthesis and summarizes recent advances.

Optimizing electron transfer mediators based on arylimidazoles by ring fusion: synthesis, electrochemistry, and computational analysis of 2-aryl-1-methylphenanthro[9,10-d]imidazoles.

A significant improvement of the properties of redox catalysts based on the triarylimidazole framework can be achieved with a simple structural modification. By linking the ortho-carbons of the aromatics positioned at C-4 and C-5, a fused framework is generated, removing the distortion from planarity and enhancing the influence of the substituents on the redox properties. This modification leads not only to a much broader range of available redox potentials for the resulting phenanthro[9,10-d]imidazoles but also to improved stability of the corresponding radical cation. These concepts were verified with eight new phenanthro[9,10-d]imidazole derivatives, using cyclic voltammetry and DFT calculations. For this purpose, an optimized and general synthetic route to the desired compounds was developed. An excellent linear correlation of the calculated effective ionization potentials with the experimental oxidation potentials was obtained, allowing for an accurate prediction of oxidation potentials of derivatives yet to be synthesized. Moreover, high catalytic activity was found for electro-oxidative C-H activation reactions.

Recent advances in the electrochemical construction of heterocycles.

Due to the fact that the major portion of pharmaceuticals and agrochemicals contains heterocyclic units and since the overall number of commercially used heterocyclic compounds is steadily growing, heterocyclic chemistry remains in the focus of the synthetic community. Enormous efforts have been made in the last decades in order to render the production of such compounds more selective and efficient. However, most of the conventional methods for the construction of heterocyclic cores still involve the use of strong acids or bases, the operation at elevated temperatures and/or the use of expensive catalysts and reagents. In this regard, electrosynthesis can provide a milder and more environmentally benign alternative. In fact, numerous examples for the electrochemical construction of heterocycles have been reported in recent years. These cases demonstrate that ring formation can be achieved efficiently under ambient conditions without the use of additional reagents. In order to account for the recent developments in this field, a selection of representative reactions is presented and discussed in this review.

Heterogenized Molecular Electrocatalyst Based on a Hydroxo-Bridged Binuclear Copper(II) Phenanthroline Compound for Selective Reduction of CO2 to Ethylene.

Molecular copper catalysts have emerged as promising candidates for the electrochemical reduction of CO2 . Notable features of such systems include the ability of Cu to generate C2+  products and the well-defined active sites that allow for targeted structural tuning. However, the frequently observed in situ formation of Cu nanoclusters has undermined the advantages of the molecular frameworks. It is therefore desirable to develop Cu-based catalysts that retain their molecular structures during electrolysis. In this context, a heterogenized binuclear hydroxo-bridged phenanthroline Cu(II) compound with a short Cu···Cu distance is reported as a simple yet efficient catalyst for electrogeneration of ethylene and other C2 products. In an aqueous electrolyte, the catalyst demonstrates remarkable performance, with excellent Faradaic efficiency for C2 products (62%) and minimal H2 evolution (8%). Furthermore, it exhibits high stability, manifested by no observable degradation during 15 h of continuous electrolysis. The preservation of the atomic distribution of the active sites throughout electrolysis is substantiated through comprehensive characterizations, including X-ray photoelectron and absorption spectroscopy, scanning and transmission electron microscopy, UV-vis spectroscopy, as well as control experiments. These findings establish a solid foundation for further investigations into targeted structural tuning, opening new avenues for enhancing the catalytic performance of Cu-based molecular electrocatalysts.

Quantitative prediction of excited-state decay rates for radical anion photocatalysts.

We present a computational approach for predicting key properties of organic radical anions, including excited-state lifetimes and redox potentials. The approach shows good agreement with experimental data and has potential for in silico screening to facilitate the rational design of photocatalysts.