RESUMO
Organic electrosynthesis has a long history. However, this chemistry is still new. Recently, we have seen its second renaissance with organic electrosynthesis being considered a typical green chemistry process. Therefore, a number of novel electrosynthetic methodologies have recently been developed. However, there are still many problems to be solved from a green and sustainable viewpoint. After an explanation of the historical survey of organic electrosynthesis, this paper focuses on recent remarkable developments in new electrosynthetic methodologies, such as novel electrodes, recyclable nonvolatile electrolytic solvents and recyclable supporting electrolytes, as well as new types of electrolytic flow cells. Furthermore, novel types of organic electrosynthetic reactions will be mentioned.
RESUMO
The cathodic reduction of bromodifluoromethyl phenyl sulfide (1) using o-phthalonitrile as a mediator generated the (phenylthio)difluoromethyl radical, which reacted with α-methylstyrene and 1,1-diphenylethylene to provide the corresponding adducts in moderate and high yields, respectively. In contrast, chemical reduction of 1 with SmI2 resulted in much lower product yields. The detailed reaction mechanism was clarified based on the cathodic reduction of 1 in the presence of deuterated acetonitrile, CD3CN.
RESUMO
Organofluorine compounds are key materials applied in daily life because of their versatile utility as functional materials, pharmaceuticals, and agrochemicals. Development of the selective fluorination of organic molecules under safe conditions is therefore one of the most important subjects in modern synthetic organofluorine chemistry. Thus, various electrophilic fluorination reagents such as XeF2, (PhSO2)2NF (NFSI), Et2NSF3 (DAST), (MeOCH2CH2)2NSF3 (Deoxofluor), 1-chloromethyl-4-fluoro-1,4-diazoniabicyclo-[2.2.2]octane bis(tetrafluoroborate) (Selectfluor), N-fluoropyridinium salts, and 4-tert-butyl-2,6-dimethylphenylsulfur trifluoride (Fluolead) have been developed for chemical fluorination to date and the development of new fluorinating reagents is still ongoing. Electrochemical synthesis has recently attracted much attention from the perspective of green sustainable chemistry because no hazardous reagents are required and scale-up is generally easy. Although electrochemical perfluorination of organic compounds using a nickel anode in anhydrous HF has been well-established to manufacture perfluoro-functional materials, electrochemical partial fluorination (selective electrochemical fluorination) has been underdeveloped due to the low nucleophilicity of fluoride ions and anode passivation, which interferes with electrolysis. Selective electrochemical fluorination can be commonly achieved in aprotic solvents containing fluoride ions to provide mostly mono- and difluorinated products. Electrolysis is conducted at constant potentials slightly higher than the first oxidation potential of a substrate. Constant current electrolysis is also effective for selective fluorination in many cases. Choice of the combination of a supporting fluoride salt and an electrolytic solvent is most important to accomplish efficient selective fluorination. In this Account, we focus on our recent work on the electrochemical mono- and difluorination of various organic compounds and their synthetic application. We first briefly explain our research background of electrochemical fluorination. Main factors such as the effects of fluoride salts as supporting electrolytes, electrolytic solvents, and anode materials on the selectivity and efficiency of fluorination are discussed. Next, effects of PEG oligomer additives enhancing the nucleophilicity of fluoride ions and organic solvent-free systems using poly(HF) salt ionic liquids as well as recyclable mediatory systems for electrochemical fluorination are described. The desulfurizative monofluorination of xanthate and gem-difluorination of benzothioate and dithioacetals are briefly mentioned. Regioselective anodic fluorination of various heterocyclic compounds having a phenylthio group as electroauxiliary and heterocycles containing sulfur and other heteroatoms are also described. In addition, a boryl group is shown to be a good leaving group for anodic fluorination. Moreover, electrochemically α,α-difluorinated phenylsulfides and phenylselenides are illustrated to be useful for photochemical C-H difluoromethylation of aromatic and heteroaromatic compounds. Finally, this Account also highlights highly diastereoselective fluorination of aliphatic heterocyclic and open-chain compounds, as well as new electrolytic fluorination methods using inorganic fluoride salts such as KF and CsF.
RESUMO
Guest editor Toshio Fuchigami discusses the history and current status of organic electrochemistry in his editorial.
RESUMO
Fundamental properties of alkali metal fluorides (MF, M = Cs, K) dissolved in 1,1,1,3,3,3-hexafluoroisopropanol (HFIP) or in 3,3,3-trifluoroethanol (TFE) are investigated, including solubility, conductivity, and viscosity. Solid-state structures of single crystals obtained from CsF/HFIP and CsF/TFE are described for the first time, giving insights into the multiple interactions between fluorinated alcohols and CsF. Applications in electrochemical fluorination reactions are successfully demonstrated.
RESUMO
We herein report that the regioselective anodic fluorination of S-alkyl benzothioate and its derivatives in various aprotic solvents using Et3N·nHF (n = 3-5) and Et4NF·nHF (n = 3-5) as supporting electrolyte and a fluorine source successfully provided the corresponding α-fluorinated products in moderate yields. Dichloromethane containing Et4NF·4HF was found to be the most suitable combination as electrolytic solvent and supporting salt as well as fluorine source for the anodic fluorination. The electrochemical fluorination of cyclic benzothioates such as benzothiophenone was also achieved.
RESUMO
Anodic fluorination of dithioacetals bearing electron-withdrawing ester, acetyl, amide, and nitrile groups at their α-positions was comparatively studied using various supporting poly(HF) salts like Et3N·nHF (n = 3-5) and Et4NF·nHF (n = 3-5). In the former two cases, the corresponding α-fluorination products or fluorodesulfurization products were obtained selectively depending on supporting poly(HF) salts used. In sharp contrast, in the latter two cases, fluorination product selectivity was strongly affected by the electron-withdrawing ability of α-substituents: A dithioacetal bearing a relatively weak electron-withdrawing amide group provided a fluorodesulfurization product selectively while a dithioacetal having a strongly electron-withdrawing nitrile group gave the α-fluorination product predominantly regardless of the poly(HF) salts used.
RESUMO
This article summarizes recent progress in the post-functionalization of conjugated polymers by electrochemical methods. These electrochemical polymer reactions typically proceed via electrochemical doping of a conjugated polymer film, followed by chemical transformation. Examples include the quantitative oxidative fluorination of polyfluorenes and oxidative halogenation of polythiophenes, as well as the reductive hydrogenation of polyfluorenones. The degree of functionalization, otherwise known as the reaction ratio, can be controlled by varying the charge passed through the polymer, allowing the optoelectronic properties of the conjugated polymers to be tailored. Wireless bipolar electrodes with an in-plane potential distribution are also useful with regard to the electrochemical doping and reaction of conjugated polymers and allow the synthesis of films exhibiting composition gradients. Such bipolar electrochemistry can induce multiple reaction sites during electrochemical polymer reactions.
Assuntos
Técnicas Eletroquímicas , Polímeros/química , EletrodosRESUMO
A novel patterning method for conducting polymer films was successfully demonstrated using the concept of bipolar electrochemistry. The local application of an anodic potential to poly(3-methylthiophene) (PMT) and poly(3,4-ethylenedioxythiophene) (PEDOT) on a bipolar electrode (BPE) realized local electrochemical doping and reaction depending on the supporting salt used. The potential applied on the BPE was measured and corresponded well to the patterns. The array-type driving electrode system was able to draw complex patterns in a site-controlled manner.
Assuntos
Compostos Bicíclicos Heterocíclicos com Pontes/química , Polímeros/química , Tiofenos/química , Condutividade Elétrica , Técnicas Eletroquímicas , EletrodosRESUMO
The direct and selective phenol coupling reaction that provides biphenols still represents a challenge in organic synthesis. The recently developed electrosynthesis on boron-doped diamond anodes with fluorinated additives was developed further to allow the application to less-expensive electrodes and fluorinated media. This advanced protocol allows the highly selective anodic phenol coupling reaction on graphite with a broad scope.
RESUMO
In this paper, we report a novel electrochemical doping method for conducting polymer films based on bipolar electrochemistry. The electrochemical doping of conducting polymers such as poly(3-methylthiophene) (PMT), poly(3,4-ethylenedioxythiophene) (PEDOT), and poly(aniline) (PANI) on a bipolar electrode having a potential gradient on its surface successfully created gradually doped materials. In the case of PEDOT film, the color change at the anodic side was also observed to be gradually transparent. PANI film treated by the bipolar doping gave a multicolored gradation across the film. The results of UV-vis and energy dispersive X-ray analyses for the doped films supported the distribution of dopants in the polymer films reflecting the potential gradient on the bipolar electrode. Furthermore, the reversibility of the bipolar doping of the PMT film was demonstrated by a spectroelectrochemical investigation.
Assuntos
Condutividade Elétrica , Técnicas Eletroquímicas/métodos , Polímeros/química , Fenômenos Ópticos , Análise EspectralRESUMO
Product selectivity control based on a liquid-liquid parallel laminar flow has been successfully demonstrated by using a microreactor. Our electrochemical microreactor system enables regioselective cross-coupling reaction of aldehyde with allylic chloride via chemoselective cathodic reduction of substrate by the combined use of suitable flow mode and corresponding cathode material. The formation of liquid-liquid parallel laminar flow in the microreactor was supported by the estimation of benzaldehyde diffusion coefficient and computational fluid dynamics simulation. The diffusion coefficient for benzaldehyde in Bu(4)NClO(4)-HMPA medium was determined to be 1.32 × 10(-7) cm(2) s(-1) by electrochemical measurements, and the flow simulation using this value revealed the formation of clear concentration gradient of benzaldehyde in the microreactor channel over a specific channel length. In addition, the necessity of the liquid-liquid parallel laminar flow was confirmed by flow mode experiments.
Assuntos
Técnicas Analíticas Microfluídicas/métodos , Álcoois/síntese química , Álcoois/química , Aldeídos/química , Compostos Alílicos/química , Benzaldeídos/química , Difusão , Eletroquímica , Técnicas de Diagnóstico Molecular , Estrutura MolecularRESUMO
The electrochemical reduction of a fluorene-based conjugated polymer, poly(9-fluorenone-alt-9,9-dioctylfluorene), was investigated for the first time. The carbonyl group in the fluorenone unit was selectively and quantitatively converted to the methylene group, as determined by (1)H NMR, IR, and energy-dispersive X-ray (EDX) analysis. The optical and electrochemical properties of the polymers were studied by UV-vis, photoluminescence (PL), and cyclic voltammetry (CV) measurements and were found to be tunable by varying the reduction level.
RESUMO
Electrochemical oxidation of water-insoluble amines (n-octylamine and n-decylamine) was successfully accomplished in aqueous electrolytes using acoustic emulsification. Acoustically prepared emulsions of fumaric acid diethyl ester in aqueous electrolytes can be also electro-reduced very smoothly. Ultrasonication to the water-insoluble organic substrate/aqueous electrolyte mixtures allowed a formation of very stable emulsions having the characteristic of giving narrow monomer droplet size distributions in the submicrometer range in aqueous electrolytes without added surfactants, and the smooth electrochemical reaction in the emulsions took place via direct electron transfer between the electrode and the water-insoluble organic droplets. In this kind of electron-transfer system, supporting electrolyte should be dissolved not only in the aqueous phase but also in the organic droplets and should contribute to the formation of an electric bilayer inside the droplets.
RESUMO
We successfully carried out Prins-type polymerization for the first time to prepare 4-fluorinated tetrahydropyran-containing polymers in a highly stereoselective manner.
RESUMO
We found that ultrasonication is highly effective for increase of the yields, current efficiency, and selectivity in anodic fluorination in Et(3)N.3HF ionic liquid.