Hierarchical Metal-Organic Framework Hybrids: Perturbation-Assisted Nanofusion Synthesis.

Metal-organic frameworks (MOFs) represent a new family of microporous materials; however, microporous-mesoporous hierarchical MOF materials have been less investigated because of the lack of simple, reliable methods to introduce mesopores to the crystalline microporous particles. State-of-the-art MOF hierarchical materials have been prepared by ligand extension methods or by using a template, resulting in intrinsic mesopores of longer ligands or replicated pores from template agents, respectively. However, mesoporous MOF materials obtained through ligand extension often collapse in the absence of guest molecules, which dramatically reduces the size of the pore aperture. Although the template-directed strategy allows for the preparation of hierarchical materials with larger mesopores, the latter requires a template removal step, which may result in the collapse of the implemented mesopores. Recently, a general template-free synthesis of hierarchical microporous crystalline frameworks, such as MOFs and Prussian blue analogues (PBAs), has been reported. This new method is based on the kinetically controlled precipitation (perturbation), with simultaneous condensation and redissolution of polymorphic nanocrystallites in the mother liquor. This method further eliminates the use of extended organic ligands and the micropores do not collapse upon removal of trapped guest solvent molecules, thus yielding hierarchical MOF materials with intriguing porosity in the gram scale. The hierarchical MOF materials prepared in this way exhibited exceptional properties when tested for the adsorption of large organic dyes over their corresponding microporous frameworks, due to the enhanced pore accessibility and electrolyte diffusion within the mesopores. As for PBAs, the pore size distribution of these materials can be tailored by changing the metals substituting Fe cations in the PB lattice. For these, the textural mesopores increased from approximately 10 nm for Cu analogue (mesoCuHCF), to 16 nm in Co substituted compound (mesoCoHCF), and to as large as 30 nm for the Ni derivative (mesoNiHCF). While bulk PB and analogues have a higher capacitance than hierarchical analogues for Na-batteries, the increased accessibility to the microporous channels of PBAs allow for faster intercalated ion exchange and diffusion than in bulk PBA crystals. Thus, hierarchical PBAs are promising candidates for electrodes in future electrochemical energy storage devices with faster charge-discharge rates than batteries, namely pseudocapacitors. Finally, this new synthetic method opens the possibility to prepare hierarchical materials having bimodal distribution of mesopores, and to tailor the structural properties of MOFs for different applications, including contrasting agents for MRI, and drug delivery.

Hierarchical Silica Composites for Enhanced Water Adsorption at Low Humidity.

To combat water scarcity in remote areas around the world, adsorption-based atmospheric water harvesting (AWH) has been proposed as a technology that can be used alongside existing water production capabilities. However, commonly used adsorbents either have low water adsorption loadings or are difficult to regenerate. In this work, we developed two novel hierarchical silica-salt composites that both exhibit high water adsorption loadings under dry and humid conditions. The total water vapor loading, kinetics, and heats of water adsorption for both silica-salt composites were investigated. As hierarchical silicas have tunable pores and large pore volumes, these materials serve as effective host matrixes for the hygroscopic salt LiCl. Our results suggest that hierarchical pores play a significant role in water adsorption: micropores and some smaller mesopores act as "storage" sites for hygroscopic salt, whereas larger mesopores and macropores increase the accessibility of water vapor into the silica. Using this mix of pores, we achieved greater than 0.4 g H2O/g composite at 10% RH and 27 °C. Additionally, we found that the salt-impregnated silica and bare silica had the same heat of adsorption: 80-90 kJ/mol. The results suggest that the H-bond interactions are similar for both systems and that the primary mechanism at play here is water cluster adsorption/desorption. Despite the similar energies, the LiCl-containing materials exhibited considerably slower kinetics than bare silica materials. Of equal importance to the adsorption capacity and kinetics of these composites is their mechanical stability. To assess their mechanical stability, high-energy ball milling of silica was conducted to create more uniform particle sizes. However, reduced particle sizes came at a cost─the BET surface areas and pore volumes were drastically decreased after more than 1 h of ball milling. Findings from this study suggest that short-term ball milling may be a viable large-scale option to reduce particle size in silica materials without sacrificing significant performance.

Free energy relationships in the electrical double layer over single-layer graphene.

Fluid/solid interfaces containing single-layer graphene are important in the areas of chemistry, physics, biology, and materials science, yet this environment is difficult to access with experimental methods, especially under flow conditions and in a label-free manner. Herein, we demonstrate the use of second harmonic generation to quantify the interfacial free energy at the fused silica/single-layer graphene/water interface at pH 7 and under conditions of flowing aqueous electrolyte solutions ranging in NaCl concentrations from 10(-4) to 10(-1) M. Our analysis reveals that single-layer graphene reduces the interfacial free energy density of the fused silica/water interface by a factor of up to 7, which is substantial given that many interfacial processes, including those that are electrochemical in nature, are exponentially sensitive to interfacial free energy density.

Template-free synthesis of hierarchical porous metal-organic frameworks.

A template-free synthesis of a hierarchical microporous-mesoporous metal-organic framework (MOF) of zinc(II) 2,5-dihydroxy-1,4-benzenedicarboxylate (Zn-MOF-74) is reported. The surface morphology and porosity of the bimodal materials can be modified by etching the pore walls with various synthesis solvents for different reaction times. This template-free strategy enables the preparation of stable frameworks with mesopores exceeding 15 nm, which was previously unattained in the synthesis of MOFs by the ligand-extension method.

Synthesis of porous, nitrogen-doped adsorption/diffusion carbonaceous membranes for efficient CO2 separation.

A porous, nitrogen-doped carbonaceous free-standing membrane (TFMT-550) is prepared by a facile template-free method using letrozole as an intermediate to a triazole-functionalized-triazine framework, followed by carbonization. Such adsorption/diffusion membranes exhibit good separation performance of CO2 over N2 and surpassing the most recent Robeson upper bound. An exceptional ideal CO2 /N2 permselectivity of 47.5 was achieved with a good CO2 permeability of 2.40 × 10(-13) mol m m(-2) s(-1) Pa(-1) . The latter results arise from the presence of micropores, narrow distribution of small mesopores and from the strong dipole-quadrupole interactions between the large quadrupole moment of CO2 molecules and the polar sites associated with N groups (e.g., triazine units) within the framework.

Electrical and thermal conductivity of low temperature CVD graphene: the effect of disorder.

In this paper we present a study of graphene produced by chemical vapor deposition (CVD) under different conditions with the main emphasis on correlating the thermal and electrical properties with the degree of disorder. Graphene grown by CVD on Cu and Ni catalysts demonstrates the increasing extent of disorder at low deposition temperatures as revealed by the Raman peak ratio, IG/ID. We relate this ratio to the characteristic domain size, La, and investigate the electrical and thermal conductivity of graphene as a function of La. The electrical resistivity, ρ, measured on graphene samples transferred onto SiO2/Si substrates shows linear correlation with La(-1). The thermal conductivity, K, measured on the same graphene samples suspended on silicon pillars, on the other hand, appears to have a much weaker dependence on La, close to K∼La1/3. It results in an apparent ρ∼K3 correlation between them. Despite the progressively increasing structural disorder in graphene grown at lower temperatures, it shows remarkably high thermal conductivity (10(2)-10(3) W K(-1) m(-1)) and low electrical (10(3)-3×10(5) Ω) resistivities suitable for various applications.

Phosphorylated mesoporous carbon as a solid acid catalyst.

Mesoporous carbon catalyst supports are attractive due to their wide chemical stability while potentially increasing mass-transport through and providing a path for larger molecules to access catalytic sites. Herein we report the synthesis of a phosphorylated mesoporous carbon solid-acid catalyst characterized by NH(3)-TPD and isopropanol dehydration.

Boron and nitrogen-rich carbons from ionic liquid precursors with tailorable surface properties.

A novel strategy for tailoring the adsorption and structural properties of ionic liquid derived carbons has been developed. By changing the carbonization temperature and ratios of ionic liquids (ILs) containing a cross-linkable anion, such as 1-butyl-3-methylimidazolium tricyanomethanide [BMIm][C(CN)(3)] and 1-ethyl-3-methylimidazolium tetracyanoborate [EMIm][B(CN)(4)], boron and nitrogen-rich carbons with slit-like pores and specific surface areas exceeding 500 m(2) g(-1) have been prepared. Furthermore, the nitrogen-rich carbons exhibit high adsorption capacity for CO(2) adsorption and selectivity for CO(2)/N(2) separation.

Ordered mesoporous alumina-supported metal oxides.

The one-pot synthesis of alumina-supported metal oxides via self-assembly of a metal precursor and aluminum isopropoxide in the presence of triblock copolymer (as a structure directing agent) is described in detail for nickel oxide. The resulting mesoporous mixed metal oxides possess p6 mm hexagonal symmetry, well-developed mesoporosity, relatively high BET surface area, large pore widths, and crystalline pore walls. In comparison to pure alumina, nickel aluminum oxide samples exhibited larger mesopores and improved thermal stability. Also, long-range ordering of the aforementioned samples was observed for nickel molar percentages as high as 20%. The generality of the recipe used for the synthesis of mesoporous nickel aluminum oxide was demonstrated by preparation of other alumina-supported metal oxides such as MgO, CaO, TiO 2, and Cr 2O 3. This method represents an important step toward the facile and reproducible synthesis of ordered mesoporous alumina-supported materials for various applications where large and accessible pores with high loading of catalytically active metal oxides are needed.

New Class of Type III Porous Liquids: A Promising Platform for Rational Adjustment of Gas Sorption Behavior.

Porous materials have already manifested their unique properties in a number of fields. Generally, all porous materials are in a solid state other than liquid, in which molecules are closely packed without porosity. "Porous" and "liquid" seem like antonyms. Herein, we report a new class of Type 3 porous liquids based on rational coupling of microporous framework nanoparticles as porous hosts with a bulky ionic liquid as the fluid media. Positron annihilation lifetime spectroscopy (PALS) and CO2 adsorption measurements confirm the successful engineering of permanent porosity into these liquids. Compared to common porous solid materials, as-synthesized porous liquids exhibited pronounced hysteresis loops in the CO2 sorption isotherms even at ambient conditions (298 K, 1 bar). The unique features of these novel porous liquids could bring new opportunities in many fields including gas separation and storage, air separation and regeneration, gas transport, and permanent gas storage at ambient conditions.

Solid-state synthesis of ordered mesoporous carbon catalysts via a mechanochemical assembly through coordination cross-linking.

Ordered mesoporous carbons (OMCs) have demonstrated great potential in catalysis, and as supercapacitors and adsorbents. Since the introduction of the organic-organic self-assembly approach in 2004/2005 until now, the direct synthesis of OMCs is still limited to the wet processing of phenol-formaldehyde polycondensation, which involves soluble toxic precursors, and acid or alkali catalysts, and requires multiple synthesis steps, thus restricting the widespread application of OMCs. Herein, we report a simple, general, scalable and sustainable solid-state synthesis of OMCs and nickel OMCs with uniform and tunable mesopores (∼4-10 nm), large pore volumes (up to 0.96 cm3 g-1) and high-surface areas exceeding 1,000 m2 g-1, based on a mechanochemical assembly between polyphenol-metal complexes and triblock co-polymers. Nickel nanoparticles (∼5.40 nm) confined in the cylindrical nanochannels show great thermal stability at 600 °C. Moreover, the nickel OMCs offer exceptional activity in the hydrogenation of bulky molecules (∼2 nm).

Short-time synthesis of SBA-15 using various silica sources.

A short-time synthesis of SBA-15 is reported by using two different silica sources, sodium metasilicate (Na2SiO3(9)H2O) and tetraethyl orthosilicate (TEOS). The SBA-15 samples obtained from both silica sources were highly ordered as evidenced by SAXS spectra showing five reflection peaks characteristic for p6mm symmetry group. While the surface areas of these samples were similar, the pore volume of the sample prepared from TEOS was slightly larger than that from sodium metasilicate. However, the latter exhibited higher microporosity and thicker pore walls. It was shown that a significant reduction of time of the self-assembly step from 24 to 2 h had no detrimental influence on the quality of SBA-15 materials.

Acid-functionalized mesoporous carbon: an efficient support for ruthenium-catalyzed γ-valerolactone production.

The hydrogenation of levulinic acid has been studied using Ru supported on ordered mesoporous carbons (OMCs) prepared by soft-templating. P- and S-containing acid groups were introduced by postsynthetic functionalization before the addition of 1 % Ru by incipient wetness impregnation. These functionalities and the reaction conditions mediate the activity and selectivity of the levulinic acid hydrogenation. The presence of S-containing groups (Ru/OMC-S and Ru/OMC-P/S) deactivates the Ru catalysts strongly, whereas the presence of P-containing groups (Ru/OMC-P) enhances the activity compared to that of pristine Ru/OMC. Under mild conditions (70 °C and 7 bar H2 ) the catalyst shows high selectivity to γ-valerolactone (GVL; >95 %) and high stability on recycling. However, under more severe conditions (200 °C and p H 2=40 bar) Ru/OMC-P is particularly able to promote GVL ring-opening and the consecutive hydrogenation to pentanoic acid.

Interfacial ionic 'liquids': connecting static and dynamic structures.

It is well known that room temperature ionic liquids (RTILs) often adopt a charge-separated layered structure, i.e. with alternating cation- and anion-rich layers, at electrified interfaces. However, the dynamic response of the layered structure to temporal variations in applied potential is not well understood. We used in situ, real-time x-ray reflectivity to study the potential-dependent electric double layer (EDL) structure of an imidazolium-based RTIL on charged epitaxial graphene during potential cycling as a function of temperature. The results suggest that the graphene-RTIL interfacial structure is bistable in which the EDL structure at any intermediate potential can be described by the combination of two extreme-potential structures whose proportions vary depending on the polarity and magnitude of the applied potential. This picture is supported by the EDL structures obtained by fully atomistic molecular dynamics simulations at various static potentials. The potential-driven transition between the two structures is characterized by an increasing width but with an approximately fixed hysteresis magnitude as a function of temperature. The results are consistent with the coexistence of distinct anion- and cation-adsorbed structures separated by an energy barrier (∼0.15 eV).

Aqueous proton transfer across single-layer graphene.

Proton transfer across single-layer graphene proceeds with large computed energy barriers and is therefore thought to be unfavourable at room temperature unless nanoscale holes or dopants are introduced, or a potential bias is applied. Here we subject single-layer graphene supported on fused silica to cycles of high and low pH, and show that protons transfer reversibly from the aqueous phase through the graphene to the other side where they undergo acid-base chemistry with the silica hydroxyl groups. After ruling out diffusion through macroscopic pinholes, the protons are found to transfer through rare, naturally occurring atomic defects. Computer simulations reveal low energy barriers of 0.61-0.75 eV for aqueous proton transfer across hydroxyl-terminated atomic defects that participate in a Grotthuss-type relay, while pyrylium-like ether terminations shut down proton exchange. Unfavourable energy barriers to helium and hydrogen transfer indicate the process is selective for aqueous protons.

Interaction of magnesium ions with pristine single-layer and defected graphene/water interfaces studied by second harmonic generation.

This work reports thermodynamic and electrostatic parameters for fused silica/water interfaces containing cm(2)-sized graphene ranging from a single layer of pristine graphene to defected graphene. Second harmonic generation (SHG) measurements carried out at pH 7 indicate that the surface charge density of the fused silica/water interface containing the defected graphene (-0.009(3) to -0.010(3) C/m(2)) is between that of defect-free single layer graphene (-0.0049(8) C/m(2)) and bare fused silica (-0.013(6) C/m(2)). The interfacial free energy of the fused silica/water interface calculated from the Lippmann equation is reduced by a factor of 7 in the presence of single-layer pristine graphene, while defected graphene reduces it only by a factor of at most 2. Subsequent SHG adsorption isotherm studies probing the Mg(2+) adsorption at the fused silica/water interface result in fully reversible metal ion interactions and observed binding constants, Kads, of 4(1) - 5(1) × 10(3) M(-1) for pristine graphene and 3(1) - 4(1) × 10(3) M(-1) for defected graphene, corresponding to adsorption free energies, ΔGads, referenced to the 55.5 molarity of water, of -30(1) to -31.1(7) kJ/mol for both interfaces, comparable to Mg(2+) adsorption at the bare fused silica/water interface. Maximum Mg(2+) ion densities are obtained from Gouy-Chapman model fits to the Langmuir adsorption isotherms and found to range from 1.1(5) - 1.5(4) × 10(12) ions adsorbed per cm(2) for pristine graphene and 2(1) - 3.1(5) × 10(12) ions adsorbed per cm(2) for defected graphene, slightly smaller than those of for Mg(2+) adsorption at the bare fused silica/water interface ((2-4) × 10(12) ions adsorbed per cm(2)), assuming the magnesium ions are bound as divalent species. We conclude that the presence of defects in the graphene sheet, which we estimate here to be around 1.3 × 10(11) cm(2), imparts only subtle changes in the thermodynamic and electrostatic parameters quantified here.

Ionic liquid derived carbons as highly efficient oxygen reduction catalysts: first elucidation of pore size distribution dependent kinetics.

Metal-free N-doped carbons with controllable pore texture were derived from carbonization of ionic liquid and served as catalysts for oxygen reduction reaction (ORR) with an activity comparable to that of Pt/C. The investigation shows that both the ORR activity and kinetics are strongly correlated with the pore size distribution.

Directed synthesis of nanoporous carbons from task-specific ionic liquid precursors for the adsorption of CO2.

Postcombustion CO2 capture has become a key component of greenhouse-gas reduction as anthropogenic emissions continue to impact the environment. We report a one-step synthesis of porous carbon materials using a series of task-specific ionic liquids for the adsorption of CO2 . By varying the structure of the ionic liquid precursor, we were able to control pore architecture and surface functional groups of the carbon materials in this one-step synthesis process leading to adsorbents with high CO2 sorption capacities (up to 4.067 mmol g(-1) ) at 0 °C and 1 bar. Added nitrogen functional groups led to high CO2 /N2 adsorption-selectivity values ranging from 20 to 37 whereas simultaneously the interaction energy was enhanced relative to carbon materials with no added nitrogen.

Effect of cation on diffusion coefficient of ionic liquids at onion-like carbon electrodes.

While most supercapacitors are limited in their performance by the stability of the electrolyte, using neat ionic liquids (ILs) as the electrolyte can expand the voltage window and temperature range of operation. In this study, ILs with bis(trifluoromethylsulfonyl)imide (Tf2N) as the anion were investigated as the electrolyte in onion-like carbon-based electrochemical capacitors. To probe the influence of cations on the electrochemical performance of supercapacitors, three different cations were used: 1-ethyl-3-methylimidazolium, 1-hexyl-3-methylimidazolium and 1,6-bis(3-methylimidazolium-1-yl). A series of electrochemical characterization tests was performed using cyclic voltammetry (CV), galvanostatic cycling and electrochemical impedance spectroscopy (EIS). Diffusion coefficients were measured using EIS and correlated with quasielastic neutron scattering and molecular dynamics simulation. These three techniques were used in parallel to confirm a consistent trend between the three ILs. It was found that the IL with the smaller sized cation had a larger diffusion coefficient, leading to a higher capacitance at faster charge-discharge rates. Furthermore, the IL electrolyte performance was correlated with increasing temperature, which limited the voltage stability window and led to the formation of a solid electrolyte interphase on the carbon electrode surface, evident in both the CV and EIS experiments.