Partial breaking of the Coulombic ordering of ionic liquids confined in carbon nanopores.

Ionic liquids are composed of equal quantities of positive and negative ions. In the bulk, electrical neutrality occurs in these liquids due to Coulombic ordering, in which ion shells of alternating charge form around a central ion. Their structure under confinement is far less well understood. This hinders the widespread application of ionic liquids in technological applications. Here we use scattering experiments to resolve the structure of a widely used ionic liquid (EMI-TFSI) when it is confined inside nanoporous carbons. We show that Coulombic ordering reduces when the pores can accommodate only a single layer of ions. Instead, equally charged ion pairs are formed due to the induction of an electric potential of opposite sign in the carbon pore walls. This non-Coulombic ordering is further enhanced in the presence of an applied external electric potential. This finding opens the door for the design of better materials for electrochemical applications.

Water Adsorption Property of Hierarchically Nanoporous Detonation Nanodiamonds.

The detonation nanodiamonds form the aggregate having interparticle voids, giving a marked hygroscopic property. As the relationship between pore structure and water adsorption of aggregated nanodiamonds is not well understood yet, adsorption isotherms of N2 at 77 K and of water vapor at 298 K of the well-characterized aggregated nanodiamonds were measured. HR-TEM and X-ray diffraction showed that the nanodiamonds were highly crystalline and their average crystallite size was 4.5 nm. The presence of the graphitic layers on the nanodiamond particle surface was confirmed by the EELS examination. The pore size distribution analysis showed that nanodiamonds had a few ultramicropores with predominant mesopores of 4.5 nm in average size. The water vapor adsorption isotherm of IUPAC Type V indicates the hydrophobicity of the nanodiamond aggregates, with the presence of hydrophilic sites. Then the hygroscopic nature of nanodiamonds should be associated with the surface functionalities of the graphitic shell and the ultramicropores on the mesopore walls.

Nanoporosity Change on Elastic Relaxation of Partially Folded Graphene Monoliths.

Fabrication of nanographene shows a promising route for production of designed porous carbons, which is indispensable for highly efficient molecular separation and energy storage applications. This process requires a better understanding of the mechanical properties of nanographene in their aggregated structure. We studied the structural and mechanical properties of nanographene monoliths compressed at 43 MPa over different times from 3 to 25 h. While in monoliths compressed over shorter time adsorption isotherms of Ar at 87 K or N2 at 77 K exhibited a prominent hysteresis due to presence of predominant mesopores, compression for long time induces a low pressure hysteresis. On the other hand, compression for 25 h increases the microporosity evaluated by Ar adsorption, not by N2 adsorption, indicating that 25 h compression rearranges the nanographene stacking structure to produce ultramicropores that can be accessible only for Ar. TEM, X-ray diffraction, and Raman spectroscopic studies indicated that the compression for 25 h unfolds double-bent-like structures, relaxing the unstable nanographene stacked structure formed on the initial compression without nanographene sheets collapse. This behavior stems from the highly elastic nature of the nanographenes.

Essential Role of Viscosity of SWCNT Inks in Homogeneous Conducting Film Formation.

Newly developed inorganic single-wall carbon nanotube (SWCNT) inks of the Zn/Al complex and colloidal silica give a quite homogeneous SWCNT film on the polyethylene terephthalate (PET) substrate by the bar-coating method, whereas the surfactant-based SWCNT inks of sodium dodecyl sulfonate (SDS) and sodium dodecyl benzene sulfonate (SDBS) cannot give a homogeneous film. The key properties of SWCNT inks were studied for the production of homogeneous SWCNT films. The contact angle and surface tension of the inorganic dispersant-based SWCNT inks were 70° and 72 mN m(-1), respectively, being close to those of water (71.5° and 71 mN m(-1)). The viscosity was significantly higher than that of water (0.90 mPa·s), consequently, providing sufficient wettability, spreadability, and slow drying of the ink on the substrate, leading to homogeneous film formation. On the other hand, the surfactant dispersant-aided SWCNT inks have the contact angle and surface tension twice lower than the inorganic dispersant-based SWCNT inks, guaranteeing better wettability and spreadability than the inorganic dispersant-based inks. However, the small viscosity close to that of water induces a heterogeneous flow of SWCNT ink on rapid drying, leading to inhomogeneous film formation.

Staggered structural dynamic-mediated selective adsorption of H2O/D2O on flexible graphene oxide nanosheets.

Graphene oxide (GO) is the one of the most promising family of materials as atomically thin membranes for water-related molecular separation technologies due to its amphipathic nature and layered structure. Here, we show important aspects of GO on water adsorption from molecular dynamics (MD) simulations, in-situ X-ray diffraction (XRD) measurements, and ex-situ nuclear magnetic resonance (NMR) measurements. Although the MD simulations for GO and the reduced GO models revealed that the flexibility of the interlayer spacing could be attributed to the oxygen-functional groups of GO, the ultra-large GO model cannot well explain the observed swelling of GO from XRD experiments. Our MD simulations propose a realistic GO interlayer structure constructed by staggered stacking of flexible GO sheets, which can explain very well the swelling nature upon water adsorption. The transmission electron microscopic (TEM) observation also supports the non-regular staggered stacking structure of GO. Furthermore, we demonstrate the existence of the two distinct types of adsorbed water molecules in the staggered stacking: water bonded with hydrophilic functional groups and "free" mobile water. Finally, we show that the staggered stacking of GO plays a crucial role in H/D isotopic recognition in water adsorption, as well as the high mobility of water molecules.

Role of the organic linker in the early stages of the templated synthesis of PMOs.

Classical MD simulations for surfactant-bromide-water solutions containing several organosilicate precursors show that the presence or absence of molecular-scale periodicity in the pore walls of PMOs is dictated by the strength of the surfactant micelle-organosilica interaction and by the relative flexibility and orientation of the organic linker.

Negative thermal expansion of water in hydrophobic nanospaces.

The density and intermolecular structure of water in carbon micropores (w = 1.36 nm) are investigated by small-angle X-ray scattering (SAXS) and X-ray diffraction (XRD) measurements between 20 K and 298 K. The SAXS results suggest that the density of the water in the micropores increased with increasing temperature over a wide temperature range (20-277 K). The density changed by 10%, which is comparable to the density change of 7% between bulk ice (I(c)) at 20 K and water at 277 K. The results of XRD at low temperatures (less than 200 K) show that the water forms the cubic ice (I(c)) structure, although its peak shape and radial distribution functions changed continuously to those of a liquid-like structure with increasing temperature. The SAXS and XRD results both showed that the water in the hydrophobic nanospaces had no phase transition point. The continuous structural change from ice I(c) to liquid with increasing temperature suggests that water shows negative thermal expansion over a wide temperature range in hydrophobic nanospaces. The combination of XRD and SAXS measurements makes it possible to describe confined systems in nanospaces with intermolecular structure and density of adsorbed molecular assemblies.

Zero-Overpotential Redox Reactions of Quinone-Based Molecules Confined in Carbon Micropores.

Quinone-based aromatic compounds have been studied as electrode materials for various energy-storage devices. However, the relatively large activation barrier of the charge-transfer process of these redox-active molecules causes sluggish reactions and a decrease in energy efficiency. To lower the activation barrier, aromatic compounds must be strongly adsorbed on the electrode surface, preferably via π-π stacking interactions. Molecules in slit-shaped micropores strongly adsorb on the graphitic walls, thus experiencing unique micropore-confinement properties. In this study, the micropore-confinement effect is extended to the adsorption of quinone-based redox-active molecules in 0.8 nm slit-shaped micropores of activated carbon, which produces a drastic reduction in the activation barrier of the charge-transfer process and creates a zero-overpotential redox reaction. The property originates from the short distance (approximately 0.3 nm) between the quinone molecules and the graphitic wall due to the strong adsorption of the aromatic compound. Our results provide the first demonstration that the micropore-confinement effect can reduce and nearly eliminate the activation barrier of an electrochemical reaction. We also demonstrate the applicability of this approach via the charge/discharge performance of a two-electrode cell. Cells comprising the aromatic compound/activated carbon material as positive and negative electrodes exhibit a greater retention capacity than those without activated carbon. The technique described herein can guide the development of high-performance, rapid charging/discharging electrodes for energy-storage devices such as batteries, supercapacitors, and hybrid devices using organic materials.

Adsorption separation of heavier isotope gases in subnanometer carbon pores.

Isotopes of heavier gases including carbon (13C/14C), nitrogen (13N), and oxygen (18O) are highly important because they can be substituted for naturally occurring atoms without significantly perturbing the biochemical properties of the radiolabelled parent molecules. These labelled molecules are employed in clinical radiopharmaceuticals, in studies of brain disease and as imaging probes for advanced medical imaging techniques such as positron-emission tomography (PET). Established distillation-based isotope gas separation methods have a separation factor (S) below 1.05 and incur very high operating costs due to high energy consumption and long processing times, highlighting the need for new separation technologies. Here, we show a rapid and highly selective adsorption-based separation of 18O2 from 16O2 with S above 60 using nanoporous adsorbents operating near the boiling point of methane (112 K), which is accessible through cryogenic liquefied-natural-gas technology. A collective-nuclear-quantum effect difference between the ordered 18O2 and 16O2 molecular assemblies confined in subnanometer pores can explain the observed equilibrium separation and is applicable to other isotopic gases.

Structural mechanism of reactivation with steam of pitch-based activated carbon fibers.

Customized micro- and mesoporous carbons are in high demand for ecofriendly technologies. Reactivation of the well-characterized pitch-based activated carbon fiber (ACF) can provide a clear understanding of the structural mechanism of steam activation, which would be helpful for designing better micro- and mesoporous carbons. ACFs were reactivated with steam at 973-1173 K. X-ray diffraction and Raman spectroscopy indicated that the stacking number of graphene-like layers of the pore wall decreased with an increase in the reactivation temperature. The average fiber diameter of the ACFs, which was measured via scanning electron microscopy, decreased with the increase in the reactivation temperature. The relationship between the decrease in the fiber diameter and the burn-off suggested that reactivation above 1023 K produced micropores inside the fiber. A deconvolution analysis of the pore-size distribution revealed the variation of the distribution. The peak difference was approximately 0.3 nm, depending on the reactivation temperature. These results indicate that reactivation with steam proceeds via the preferential one-by-one gasification of less-crystalline graphene-like units.

Flux Growth and Magnetic Properties of Helimagnetic Hexagonal Ferrite Ba(Fe1-x Sc x )12O19 Single Crystals.

Fabricating large, high-crystalline-quality single-crystal samples of hexagonal ferrite Ba(Fe1-x Sc x )12O19 is the first important step to elucidating its helimagnetic structure and developing it for further applications. In this study, single crystals of Ba(Fe1-x Sc x )12O19 of various Sc concentrations x were successfully grown by the spontaneous crystallization method using Na2O-Fe2O3 flux. We determined the optimal starting composition of reagents for Ba(Fe1-x Sc x )12O19 growth as a function of x. In situ monitoring of the crystal nucleus generation accelerated the success of crystal growth. The obtained crystals comprised black and lamellate structures with a size of 13 mm × 8 mm × 2 mm and a surface of {001} orientation. X-ray diffraction and elemental analysis revealed that the obtained crystals were composed of single-phase Ba(Fe1-x Sc x )12O19 of high crystalline quality. The lattice constants a and c increased linearly with increasing x, thereby following Vegard's law. The temperature dependence of magnetization and the magnetization curves at 77 K of the x = 0.128 crystal exhibited behavior characteristics of helimagnetism. Neutron diffraction measurements of the x = 0.128 crystal exhibited magnetic satellite reflection peaks below 211 K, providing evidence that Ba(Fe1-x Sc x )12O19 behaves as a helimagnetic material.

Unusual hygroscopic nature of nanodiamonds in comparison with well-known porous materials.

Nanodiamond aggregates have interparticle pores of 4.5 nm on average, exhibiting porous nature involved in their water storage. This work studies the hygroscopic nature of porous nanodiamond aggregates by water absorption based on liquid water droplets. Nanodiamond aggregates show hydrophobicity from the water vapor adsorption. Surprisingly, porous nanodiamond aggregates quickly absorb water droplets at the bulk scale. The volume of absorbed liquid water is comparable to that of the water-absorbing clay Montmorillonite and higher than those of zeolites ZSM-5 and molecular sieve 5A. This hygroscopic nature of nanodiamonds is ascribed to the micro- and mesoporous structure of their aggregates and the special core-shell structure of each nanodiamond particle (wrapped by graphene-like carbon). The absorption rate of liquid water in the porous nanodiamonds is influenced by the surface wettability, while the hygroscopic capacity depends mainly on the hierarchical porosity.

Adsorption-desorption mediated separation of low concentrated D2O from water with hydrophobic activated carbon fiber.

The adsorption and desorption of D2O on hydrophobic activated carbon fiber (ACF) occurs at a smaller pressure than the adsorption and desorption of H2O. The behavior of the critical desorption pressure difference between D2O and H2O in the pressure range of 1.25-1.80kPa is applied to separate low concentrated D2O from water using the hydrophobic ACF, because the desorption branches of D2O and H2O drop almost vertically. The deuterium concentration of all desorbed water in the above pressure range is lower than that of water without adsorption-treatment on ACF. The single adsorption-desorption procedure on ACF at 1.66kPa corresponding to the maximum difference of adsorption amount between D2O and H2O reduced the deuterium concentration of desorbed water to 130.6ppm from 143.0ppm. Thus, the adsorption-desorption procedure of water on ACF is a promising separation and concentration method of low concentrated D2O from water.

Conducting linear chains of sulphur inside carbon nanotubes.

Despite extensive research for more than 200 years, the experimental isolation of monatomic sulphur chains, which are believed to exhibit a conducting character, has eluded scientists. Here we report the synthesis of a previously unobserved composite material of elemental sulphur, consisting of monatomic chains stabilized in the constraining volume of a carbon nanotube. This one-dimensional phase is confirmed by high-resolution transmission electron microscopy and synchrotron X-ray diffraction. Interestingly, these one-dimensional sulphur chains exhibit long domain sizes of up to 160 nm and high thermal stability (~800 K). Synchrotron X-ray diffraction shows a sharp structural transition of the one-dimensional sulphur occurring at ~450-650 K. Our observations, and corresponding electronic structure and quantum transport calculations, indicate the conducting character of the one-dimensional sulphur chains under ambient pressure. This is in stark contrast to bulk sulphur that needs ultrahigh pressures exceeding ~90 GPa to become metallic.