RESUMO
A response surface methodology based on Box-Behnken design was deployed to optimize gluten-free bread formulation based on rice flour. Roselle seed powder (15, 25 and 35%), egg white powder (10, 20 and 30%) and xanthan gum (0.5, 0.75 and 1%) were selected as independent variables. The purpose of the optimization was to achieve maximum porosity and sensory properties as well as minimum hardness of bread samples. The results showed that the Roselle seed and egg white powders had a significant effect (p ≤ 0.05) on hardness, porosity and sensory characteristics of bread. However, xanthan gum did not show a significant effect (p > 0.05) on sensory properties. The design revealed the optimum formulation for gluten-free rice bread with low crumb firmness and improved porosity and sensory values by using 0.73, 30 and 25% of xanthan gum, Roselle seed and egg white powders, respectively. In addition, the optimized gluten-free bread showed higher nutritional properties in terms of total protein, ash, oil and fiber contents as well as lower staling rate compared to the control.
RESUMO
In the present study, supercritical carbon dioxide (SC-CO(2)) extraction of seed oil from winter melon (Benincasa hispida) was investigated. The effects of process variables namely pressure (150-300 bar), temperature (40-50 °C) and dynamic extraction time (60-120 min) on crude extraction yield (CEY) were studied through response surface methodology (RSM). The SC-CO(2) extraction process was modified using ethanol (99.9%) as co-solvent. Perturbation plot revealed the significant effect of all process variables on the CEY. A central composite design (CCD) was used to optimize the process conditions to achieve maximum CEY. The optimum conditions were 244 bar pressure, 46 °C temperature and 97 min dynamic extraction time. Under these optimal conditions, the CEY was predicted to be 176.30 mg-extract/g-dried sample. The validation experiment results agreed with the predicted value. The antioxidant activity and fatty acid composition of crude oil obtained under optimized conditions were determined and compared with published results using Soxhlet extraction (SE) and ultrasound assisted extraction (UAE). It was found that the antioxidant activity of the extract obtained by SC-CO(2) extraction was strongly higher than those obtained by SE and UAE. Identification of fatty acid composition using gas chromatography (GC) showed that all the extracts were rich in unsaturated fatty acids with the most being linoleic acid. In contrast, the amount of saturated fatty acids extracted by SE was higher than that extracted under optimized SC-CO(2) extraction conditions.
Assuntos
Cucurbitaceae/química , Ácidos Graxos/isolamento & purificação , Sequestradores de Radicais Livres/isolamento & purificação , Óleos de Plantas/isolamento & purificação , Sementes/química , Benzotiazóis/química , Compostos de Bifenilo/química , Dióxido de Carbono/química , Cromatografia com Fluido Supercrítico , Etanol/química , Ácidos Graxos/química , Sequestradores de Radicais Livres/química , Radicais Livres/química , Cinética , Picratos/química , Óleos de Plantas/química , Pressão , Solubilidade , Solventes/química , Ácidos Sulfônicos/químicaRESUMO
This study aims to fabricate and characterize the zein nanoribbons loaded with different concentrations (2.5, 3, 3.5, 4, and 4.5°wt%) of the anthocyanins extracted from red cabbage through the electrospinning technique. It was demonstrated that an increase in anthocyanin concentration caused an increase in viscosity and electrical conductivity without any significant change in the surface tension of the electrospinning solution. It was shown by scanning electron microscopy that an increase in anthocyanins concentration reduced the porosity of the bead-free ribbons compared with blank zein. The Fourier transform infrared spectroscopy analysis, X-ray diffraction patterns, and differential scanning calorimetry results reflected the presence of significant molecular interactions between zein and anthocyanins. Zein-anthocyanins showed high encapsulation efficiency of close to 100%. As a result, it can conclude that electrospinning is a promising method to encapsulate functional ingredients like anthocyanins.
Assuntos
Brassica , Nanofibras , Zeína , Antocianinas , Zeína/química , Nanofibras/química , Brassica/química , Microscopia Eletrônica de Varredura , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
In the present study, ultrasound-assisted extraction of crude oil from winter melon seeds was investigated through response surface methodology (RSM). Process variables were power level (25-75%), temperature (45-55 °C) and sonication time (20-40 min). It was found that all process variables have significant (p < 0.05) effects on the response variable. A central composite design (CCD) was used to determine the optimum process conditions. Optimal conditions were identified as 65% power level, 52 °C temperature and 36 min sonication time for maximum crude yield (108.62 mg-extract/g-dried matter). The antioxidant activity, total phenolic content and fatty acid composition of extract obtained under optimized conditions were determined and compared with those of oil obtained by the Soxhlet method. It was found that crude extract yield (CEY) of ultrasound-assisted extraction was lower than that of the Soxhlet method, whereas antioxidant activity and total phenolic content of the extract obtained by ultrasound-assisted extraction were clearly higher than those of the Soxhlet extract. Furthermore, both extracts were rich in unsaturated fatty acids. The major fatty acids of the both extracts were linoleic acid and oleic acid.
Assuntos
Antioxidantes/química , Cucurbitaceae/química , Ácidos Graxos/química , Fenóis/química , Extratos Vegetais/química , Óleos de Plantas/química , Sementes/química , Antioxidantes/farmacologia , Óleos de Plantas/farmacologia , Sonicação , TemperaturaRESUMO
In the current study, debittering of white mahlab (Prunus mahaleb L.) juice using polystyrene resins was investigated and optimized using the Box-Behnken response surface methodology. The effects of independent variables including resin type (cation exchange resin, anion exchange resin, and 50:50 cation/anion exchange resin), resin dosage (0.05, 0.075, and 0.1 g/mL) and agitation speed (50, 150, and 250 rpm) on total phenolic content, total flavonoid content, total anthocyanin content (TAC), antioxidant activity, and bitterness of white mahlab juice were studied. Effects of resin type and dosage were found to be significant (p < 0.05) for all responses. A dosage of 0.05 g/mL of the anion exchange resin and an agitation speed of 250 rpm were selected as the optimum conditions based on minimum bitterness (2.42) and maximum TAC (0.018 g/mol). We could conclude that the anionic resin can greatly reduce the intensity of bitterness and maintain the composition and characteristics of the P. mahaleb juice.
RESUMO
The effects of ultrasound-assisted extraction (UAE) variables-namely extraction temperature (40-60 °C), ultrasonic power (50-150 W), and sonication time (40-60 min)-on the extractive value (EV) of bioactive phenolics from Malva sylvestris leaves were investigated and optimized using Response surface methodology. The effects of extraction solvents (ethanol, ethyl acetate, and n-hexane) on EV, free radical scavenging activity (FRSA), total phenolic content (TPC), and major bioactive phenolics were studied using agitated bed extraction (ABE), and the results were compared with the UAE findings. Under the optimal UAE conditions (48 °C, 110.00 W, and 48.77 min) the experimental EV was 279.89 ± 0.21 mg/g with 71.12 ± 0.15% DPPHsc, 73.35 ± 0.11% ABTSsc, and a TPC of 152.25 ± 0.14 mg GAE/g. Ethanolic ABE results in higher EV (320.16 ± 0.25 mg g-1) compared to UAE, while the FRSA and TPC values were reduced. HPLC analysis revealed that the concentration of bioactive phenolics increased significantly (p < 0.05) under the optimal UAE conditions.
RESUMO
In this study, ultrasound-assisted extraction of green pea pod polysaccharide (GPPP) was investigated and optimized using a central composite response surface design coupled with a numerical optimization technique. The effects of ultrasonic power (50-150 W), sonication time (20-80 min), ratio of water to raw material (20:1-40:1 mL/g) and extraction temperature (40-80 °C) on polysaccharide extraction yield were studied. The maximum extraction yield was obtained with a sonication power of 135.34 W, extraction time of 48.61 min, ratio of water to raw material of 33.6:1 mL/g and extraction temperature of 68.25 °C. Under these conditions, the experimental yield was 7.37% ± 0.13%, which was in close agreement with the predicted value (7.20%). The GPPP has been analyzed in order to identify a variety of chemical properties. The FT-IR spectrum demonstrated obvious characteristic peaks of polysaccharides. Furthermore, antioxidant activity of GPPP was evaluated by various antioxidant assays in vitro. The results revealed that GPPP possessed considerable DPPH free radical scavenging activity (91.03%), reducing power (0.63) and ferric reducing antioxidant power (0.34 mmol/L) at a total amount of 0.9 mg/mL. These findings indicated that GPPP extracted using an ultrasound-assisted extraction technique has potential as a novel source of natural antioxidant agent for future applications.