RESUMO
SignificanceThere is a common consensus that lode gold deposits mostly precipitated from metamorphic fluids via fluid boiling and/or fluid-rock interaction, but whether magmatic hydrothermal fluids and the mixing of such fluids with an external component have played a vital role in the formation of lode gold deposits remains elusive. We use garnet secondary ion mass spectrometry oxygen isotope analysis to demonstrate that the world-class Dongping lode gold deposit has been formed by multiple pulses of magmatic hydrothermal fluids and their mixing with large volumes of meteoric water. This study opens an opportunity to tightly constrain the origin of lode gold deposits worldwide and other hydrothermal systems that may have generated giant ore deposits in the Earth's crust.
RESUMO
The inert C(sp3)-H bond and easy overoxidation of toluene make the selective oxidation of toluene to benzaldehyde a great challenge. Herein, we present that a photocatalyst, constructed with a small amount (1 mol %) of amorphous BiOCl nanosheets assembled on TiO2 (denoted as 0.01BOC/TiO2), shows excellent performance in toluene oxidation to benzaldehyde, with 85% selectivity at 10% conversion, and the benzaldehyde formation rate is up to 1.7 mmol g-1 h-1, which is 5.6 and 3.7 times that of bare TiO2 and BOC, respectively. In addition to the charge separation function of the BOC/TiO2 heterojunction, we found that the amorphous structure of BOC endows its abundant surface oxygen vacancies (Ov), which can further promote the charge separation. Most importantly, the surface Ov of amorphous BOC can efficiently adsorb and activate O2, and amorphous BOC makes the product, benzaldehyde, easily desorb from the catalyst surface, which alleviates the further oxidation of benzaldehyde, and results in the high selectivity. This work highlights the importance of the microstructure based on heterojunctions, which is conducive to the rational design of photocatalysts with high performance in organic synthesis.
RESUMO
The robust and scalable oxygen evolution electrocatalysts that can deliver high current densities at low applied potential is a great challenge for the large-scale industrial application in hydrogen production. Here, the preparation of a grain-boundary-rich Ni-Fe (oxy)hydroxide catalyst on Ni foam is reported using a scalable coating approach followed by a chemical precipitating treatment. This facile method effectively assembles the hierarchical Ni-Fe (oxy)hydroxide nanosheet in the ultrasmall crystalline domains (<4 nm) with rich grain boundaries. The hierarchical nanosheet structure with the grain boundaries provides more accessible catalytic sites, facile charge, and mass transfer. Benefiting from the abundant grain boundaries in the hierarchical nanosheets, the as-prepared Ni-Fe (oxy)hydroxide electrodes deliver current densities of 500 and 1000 mA cm-2 at overpotentials of only 278 and 296 mV for the oxygen evolution reaction. The prepared electrode also exhibits long-term durability at a high current density in alkaline conditions.
RESUMO
Identifying electrocatalysts with functions of easy dissociation of water, rapid transformation of hydroxyl and facile hydrogen-hydrogen bond formation are indispensable while challenge for realizing efficient alkaline hydrogen evolution reaction (HER). Herein, we presented the design of Ni3 Sn2 -NiSnOx nanocomposites towards addressing this challenge. We showed that Ni3 Sn2 possessed ideal hydrogen adsorption and low hydroxyl adsorption abilities and NiSnOx facilitated water dissociation and hydroxyl transfer process, respectively. Consequently, the fine-tuned interplay of the two functional parts realized the mutual coordination among the multiple functions and led to significantly boosted HER kinetics. Current densities of 10 and 1000â mA cm-2 were obtained at overpotentials of 14 and 165â mV on the optimized catalyst. This work highlights the significance of considering intrinsic interactions between active sites and all pertinent intermediates on obtaining promising electrocatalysts.
RESUMO
Photoelectrocatalytic (PEC) degradation of organic pollutants into CO2 and H2O is a promising strategy for addressing ever-growing environmental problems. Titanium dioxide (TiO2) has been widely studied because of its good performance and environmental benignancy; however, the PEC activity of TiO2 catalyst is substantially limited due to its fast electron-hole recombination. Herein, we report a TiO2 nanocone-based photoelectrocatalyst with superior degradation performance and outstanding durability. The unique conical catalyst can boost the PEC degradation of 4-chlorophenol (4-CP) with 99% degradation efficiency and higher than 55% mineralization efficiency at a concentration of 20 ppm. The normalized apparent rate constant of a nanocone catalyst is 5.05 h-1 g-1 m2, which is 3 times that of a nanorod catalyst and 6 times that of an aggregated particle catalyst, respectively. Further characterizations reveal that the conical morphology of TiO2 can make photogenerated charges separate and transfer more efficiently, resulting in outstanding PEC activity. Moreover, computational fluid dynamics simulations indicate that a three-dimensional conical structure is beneficial for mass transfer. This work highlights that tuning the morphology of a photoelectrocatalyst at the nanometer scale not only promotes the charge transfer but also facilitates the mass transportation, which jointly enhance the PEC performance in the degradation of persistent pollutants.
RESUMO
KEY MESSAGE: MdBZR1 directly binds to the promoter of MdABI5 and suppresses its expression to mediate ABA response. The plant hormones brassinosteroids (BRs) and abscisic acid (ABA) antagonistically regulate various aspects of plant growth and development. However, the association between BR and ABA signaling is less clear. Here, we identified MdBZR1 in apple (Malus domestica) and demonstrated that it was activated by BRs and could respond to ABA treatment. Overexpression of MdBZR1 in apple calli and Arabidopsis reduced ABA-hypersensitive phenotypes, suggesting that MdBZR1 negatively regulates ABA signaling. Subsequently, we found that MdBZR1 directly bound to the promoter region of MdABI5 and suppressed its expression. MdABI5 was significantly induced by ABA treatment. And overexpression of MdABI5 in apple calli increased sensitivity to ABA. Ectopic expression of MdABI5 in Arabidopsis inhibited seed germination and seedling growth. In addition, overexpression of MdBZR1 partially attenuated MdABI5-mediated ABA sensitivity. Taken together, our data indicate that MdBZR1 directly binds to the promoter of MdABI5 and suppresses its expression to antagonistically mediate ABA response. Our work contributes to the functional studies of BZR1 and further broadens the insight into the between BR and ABA signaling.
Assuntos
Ácido Abscísico/metabolismo , Malus/genética , Proteínas de Plantas/genética , Ácido Abscísico/farmacologia , Arabidopsis/efeitos dos fármacos , Arabidopsis/genética , Regulação da Expressão Gênica de Plantas , Malus/efeitos dos fármacos , Malus/metabolismo , Reguladores de Crescimento de Plantas/metabolismo , Proteínas de Plantas/metabolismo , Plantas Geneticamente Modificadas , Regiões Promotoras Genéticas , Estresse Salino/genéticaRESUMO
An exceptional point occurring in a tailor-made lossy optical system has been recently found to alter optical properties in counter-intuitive ways. In the context of tunable plasmonic devices, exceptional points can be useful as a driving mechanism to enhance tunability. Here, we experimentally demonstrate how a plasmonic exceptional point can be incorporated in metasurface Q-plates to have the generated vortex beam tuned through a change of structural parameter. We have observed an orbital rotation in the far-field by 45 degrees in crossing the exceptional point. We expect a new generation of tunable plasmonic devices in polarization control, beam structuring and holograms, which can take advantage of the huge sensitivity from exceptional points.
RESUMO
BACKGROUND: The utilization rate of urea-N in fertilizer plays a very important role in agricultural production and environmental protection. Humic acid urea (HAU) and polyaspartic acid urea (PAU) are two similar synergistic nitrogen fertilizers. METHODS: Fourier-transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD) and carbon-13-nuclear magnetic resonance (13 C-NMR) were used to determine the loading of urea-N into humic acid (HA) and polyaspartic acid (PA). Thermal stability and physical adsorption properties of HAU and PAU were assessed by thermogravimetric analysis (TGA) and Brunauer-Emmett-Teller (BET) surface measurement. The soil incubation experiment was conducted to investigate the effects of HAU and PAU on nitrogen transformation and gaseous nitrogen loss compared with commercial urea. RESULTS: Nitrogen transformation from HAU and PAU was slowed down compared with urea. After 90 days of incubation, HAU and PAU reduced the cumulative ammonia (NH3 ) volatilization (by 9.70% and 6.30%, respectively) and nitrous oxide (N2 O) emission (by 40.48% and 43.00%, respectively) from soil compared with the urea-alone treatment. CONCLUSION: HAU and PAU could improve the nitrogen use efficiency. © 2020 Society of Chemical Industry.
Assuntos
Fertilizantes/análise , Substâncias Húmicas/análise , Nitrogênio/química , Peptídeos/química , Ureia/química , Adsorção , Amônia/química , Cinética , Solo/química , VolatilizaçãoRESUMO
Surface plasmon resonance (SPR) has found wide applications in sensing down to molecular level due to its extreme sensitivity to change of dielectric properties. An unavoidable effect in SPR is surface deformation (thermal bump) due to local heating by incident laser light used in SPR. In addition, changes in the reflection phase from the metal film used in SPR could also contribute to the SPR signal, and thus proper handling of the SPR signal is very important in order to broaden the potential applications of SPR. Here we report a simple Fabry Perot (FP) interference technique for measuring, simultaneously, the thermal bump height as well as the reflection phase shift of gold film used in SPR. We find that the shift of the FP signal is dominated by the effect of the thermal bump while it is small for the effect of the reflection phase shift due to change of dielectric property of the metal. To support our experimental results, we have also performed model simulation for the SPR system and obtain good agreement with the experiment. As both amplitude and phase can be measured, our method could lead to better characterization of SPR and can also be applied to the study of active metasurfaces under external excitation.
RESUMO
There is no known simple rule that assures the existence of interface states in photonic crystals (PCs). We show here that one can control the existence or absence of interface states in 1D PCs through engineering the bulk geometrical phase such that interface states can be guaranteed in some or all photonic bandgaps. We verify experimentally the interface state design paradigm in 1D multilayered PCs fabricated by electron beam vapor deposition. We obtain the geometrical phases by measuring the reflection phases at the bandgaps of the PCs and achieve good agreement with the theory. Our approach could provide a platform for generating a PC interface state for various applications.
RESUMO
We report measurement of the reflection phase of a dielectric (glass)/titanium (Ti) surface in the visible wavelength using a thick-gap Fabry-Perot (FP) interferometry technique. Using a two-beam interference model for the reflection peaks and troughs of the FP etalon, we obtain the air-gap spacing of the etalon and, more importantly, the reflection phase of the etalon substrate. We find systematic dependence of the as-measured reflection phase on the air-gap spacing due to the numerical aperture effect of the measuring objective. However, the relative reflection phase of Ti with respect to glass is independent of the air-gap spacing. As a demonstration of our approach in the optical characterization of small metamaterial samples, we also measure the reflection phase of a micron-sized 2D Au sawtooth nanoarray. The experiment is in good agreement with the model simulation.
RESUMO
In order to diagnose transformer fault efficiently and accurately, a dynamic integrated fault diagnosis method based on Bayesian network is proposed in this paper. First, an integrated fault diagnosis model is established based on the causal relationship among abnormal working conditions, failure modes, and failure symptoms of transformers, aimed at obtaining the most possible failure mode. And then considering the evidence input into the diagnosis model is gradually acquired and the fault diagnosis process in reality is multistep, a dynamic fault diagnosis mechanism is proposed based on the integrated fault diagnosis model. Different from the existing one-step diagnosis mechanism, it includes a multistep evidence-selection process, which gives the most effective diagnostic test to be performed in next step. Therefore, it can reduce unnecessary diagnostic tests and improve the accuracy and efficiency of diagnosis. Finally, the dynamic integrated fault diagnosis method is applied to actual cases, and the validity of this method is verified.
RESUMO
We report on the fabrication of large-area microspirals in SU8 photoresist using a 6+1 beam holographic lithography (HL) technique involving the interference of six linearly polarized side beams and one circularly polarized central beam. In contrast to common photoresist-substrate (glass) configuration, the spirals are fabricated on a substrate with a precured thin SU8 photoresist. This SU8-SU8-glass configuration strengthens the attachment of the spirals to the substrate, and hence enhances the quality of the fabricated spirals. The fabricated SU8 microspirals exhibit large optical activities with a polarization rotation close to 10 deg and a circular dichroism of about 0.5 in the visible range. Our precured substrate method could lift the limitations of the HL method in fabricating large and uniform microstructures or nanostructures.
RESUMO
Modern Mars is bipolar, cold, and oxidizing, while early Mars was characterized by icy highlands, episodic warmth and reducing atmosphere. The timing and association of the climate and redox transitions remain inadequately understood. Here we examine the spatiotemporal distribution of the low surface iron abundance in the ancient Martian terrains, revealing that iron abundance decreases with elevation in the older Noachian terrains but with latitude in the younger Noachian terrains. These observations suggest: (a) low-temperature conditions contribute to surface iron depletion, likely facilitated by anoxic leaching through freeze-thaw cycles under a reducing atmosphere, and (b) temperature distribution mode shifted from elevation-dominant to latitude-dominant during the Noachian period. Additionally, we find iron leaching intensity decreases from the Early to Late Noachian epoch, suggesting a gradual atmospheric oxidation coupled with temperature mode transition during the Noachian period. We think atmospheric oxidation led to Mars becoming cold and bipolar in its early history.
RESUMO
Air filtration has become a desirable route for collecting airborne microbes. However, the potential biotoxicity and sterilization of current air filtration membranes often lead to undesired inactivation of captured microbes, which greatly limits microbial non-traumatic transfer and recovery. Herein, we report a gel-confined phase separation strategy to rationally fabricate a fully bio-based filtration membrane (SGFM) using soluble soybean polysaccharide and gelatin. The versatile SGFM features fascinating honeycomb micro-nano architecture and hierarchical interconnected porous structures for microbial capture, and achieves a lower pressure drop, higher interception efficiency (99.3%), and superior microbial survivability than commercial gelatin filtration membranes. Particularly, the water-dissolvable SGFM can greatly simplify the elution and extraction process after bioaerosol sampling, thereby bringing about maximum sample transfer and vigorous recovery of collected microbes. Meanwhile, green capture coupled with ATP bioluminescence endows the SGFM with rapid and quantitative detection capability for airborne microbes. This work may pave the way for designing green protocols for the detection of bioaerosols.
Assuntos
Microbiologia do Ar , Filtração , Membranas Artificiais , Gelatina/química , Glycine max/química , Glycine max/microbiologia , Tamanho da Partícula , Géis/química , Química Verde , Propriedades de Superfície , PorosidadeRESUMO
The rocking-chair lithium-ion capacitors (RLICs), composed of a battery-type cathode and capacitive-type anode, alleviates the issue of increased internal resistance caused by electrolyte consumption during the cycling process of the lithium-ion capacitors (LICs). However, the poor conductivity of cathode materials and the mismatch between the cathode and anode are the key issues that hinder its commercial application. In this work, a modification simplification strategy is proposed to tailor the conductivity of the cathode and matching characteristic with the anode. The in situ grown lithium manganate (LMO) is featured with a three-dimensional conductive network constructed by reduced graphene oxide (rGO). The optimized LMO/rGO composite cathode demonstrates an excellent rate performance, lithium-ion diffusion rate, and cycling performance. After assembling an RLICs with activated carbon (AC), the RLICs exhibits an energy density of as high as 239.11 Wh/kg at a power density of 400 W/kg. Even at a power density of 200 kW/kg, its energy density can maintain at 39.9 Wh/kg. These excellent electrochemical performances are mainly attributed to the compounding of LMO with rGO, which not only improves the conductivity of the cathode but also realizes a better matching with the capacitive-type anode. This modification strategy provides a reference for the further development of energy storage devices suitable for actual production conditions and application scenarios.
RESUMO
Cuticular waxes play important roles in plant development and the interaction between plants and their environment. Researches on wax biosynthetic pathways have been reported in several plant species. Also, wax formation is closely related to environmental condition. However, the regulatory mechanism between wax and environmental factors, especially essential mineral elements, is less studied. Here we found that nitrogen (N) played a negative role in the regulation of wax synthesis in apple. We therefore analysed wax content, composition and crystals in BTB-TAZ domain protein 2 (MdBT2) overexpressing and antisense transgenic apple seedlings and found that MdBT2 could downregulate wax biosynthesis. Furthermore, R2R3-MYB transcription factor 16-like protein (MdMYB106) interacted with MdBT2, and MdBT2 mediated its ubiquitination and degradation through the 26S proteasome pathway. Finally, HXXXD-type acyl-transferase ECERIFERUM 2-like1 (MdCER2L1) was confirmed as a downstream target gene of MdMYB106. Our findings reveal an N-mediated apple wax biosynthesis pathway and lay a foundation for further study of the environmental factors associated with wax regulatory networks in apple.
Assuntos
Arabidopsis , Malus , Arabidopsis/genética , Malus/genética , Fatores de Transcrição/genética , Fatores de Transcrição/metabolismo , Aciltransferases/metabolismo , Ceras/metabolismo , Regulação da Expressão Gênica de PlantasRESUMO
Regression analysis is applied to quantitatively analyze the impact of different ambient temperature characteristics on the transformer life at different locations of Chinese mainland. 200 typical locations in Chinese mainland are selected for the study. They are specially divided into six regions so that the subsequent analysis can be done in a regional context. For each region, the local historical ambient temperature and load data are provided as inputs variables of the life consumption model in IEEE Std. C57.91-1995 to estimate the transformer life at every location. Five ambient temperature indicators related to the transformer life are involved into the partial least squares regression to describe their impact on the transformer life. According to a contribution measurement criterion of partial least squares regression, three indicators are conclusively found to be the most important factors influencing the transformer life, and an explicit expression is provided to describe the relationship between the indicators and the transformer life for every region. The analysis result is applicable to the area where the temperature characteristics are similar to Chinese mainland, and the expressions obtained can be applied to the other locations that are not included in this paper if these three indicators are known.
Assuntos
Clima , Fontes de Energia Elétrica/estatística & dados numéricos , Magnetismo/instrumentação , Magnetismo/estatística & dados numéricos , Transdutores/estatística & dados numéricos , China , Eletricidade , Desenho de Equipamento , Análise de Falha de Equipamento , TemperaturaRESUMO
Introduction: High salinity significantly hampers global agricultural productivity. Plants typically undergo lower nitrogen utilization efficiency (NUE) under salt stress. As an active byproduct from brassinolide biosynthesis, 24-epibrassinolide (EBR) is involved in regulating the stress-treated plant N absorption and assimilation. However, the exogenous EBR application effects' on N absorption and assimilation in apple exposed to the salt-stressed condition remains unclear. Methods: We sprayed exogenous EBR (0.2 mg L-1) on apple dwarf rootstock (M9T337) seedlings (growing hydroponically) under salt (NaCl) stress in a growth chamber. We analyzed the seedling development, photosynthesis and its-mediated C fixation, N ( NO 3 - ) absorption and assimilation in reponse to exogenous EBR application under salt stress. Results: The findings demonstrated that NaCl stress greatly hampered seedlings' root growth and that exogenous EBR application obviously alleviated this growth suppression. Exogenous EBR-treated plants under NaCl stress displayed the more ideal root morphology and root activity, stronger salt stress tolerance and photosynthetic capacity as well as higher C- and N-assimilation enzyme activities, NO 3 - ion flow rate and nitrate transporter gene expression level than did untreated plants. Furthermore, the results of isotope labeling noted that exogenous EBR application also enhanced 13C-photoassimilate transport from leaves to roots and 15 NO 3 - transport from roots to leaves under NaCl stress. Conclusion: Our findings imply that exogenous EBR application, through strengthening photosynthesis, C- and N-assimilation enzyme activities, nitrate absorption and transport as well as synchronized optimizing the distribution of seedlings' C and N, has a fundamental role in improving NUE in apple rootstock seedlings under salt stress.
RESUMO
Both fulvic acid (FA) and nitrogen (N) play important roles in agricultural production in China. Plants typically show a higher nitrogen utilization efficiency (NUE) under FA application. However, the role of FA application in apple growth and NUE remains unclear. A hydroponic culture experiment was performed, and M9T337 seedlings (a dwarf apple rootstock) were used as the experimental subjects. The biomass, photosynthesis, accumulation, and distribution of photosynthates, N absorption and assimilation, and relative gene expression in the seedlings were examined after treatment with five different concentrations of FA (0, 60, 120, 180, and 240 mg·L-1, represented by CK, FA1, FA2, FA3, FA4, respectively). The results showed that the seedling dry weight and 15NUE were enhanced by FA, and both were highest under the FA2 (the concentration of fulvic acid is 120 mg·L-1) treatment. Further analysis revealed that under the FA2 treatment, the root morphology was optimized, and the root activity was relatively high. Compared with CK (control, the concentration of fulvic acid is 0 mg·L-1), the FA2 treatment strengthened photosynthesis, elevated the key enzyme activities related to C metabolism, upregulated the gene expression of sugar transport proteins, and increased the root sorbitol and sucrose contents, which suggested that the FA2 treatment optimally affected the root growth and N absorption because it enhanced photosynthate synthesis and the leaf-to-root translocation of photoassimilates. The seedlings in the FA2 treatment group also showed a significantly higher NO3- influx rate and NRT (nitrate transporter) gene expression in the roots. Moreover, relatively high N metabolism-related enzyme activities in the leaves and roots were also observed under the FA2 treatment. The isotope labeling results showed that the optimal FA2 supply not only promoted seedling 15N absorption but also optimized the distribution of C and N in the seedlings. These results suggested that an optimal FA supply (120 mg·L-1) enhanced seedling NUE by strengthening photoassimilate synthesis and transport from leaves to roots, regulating N absorption, assimilation, and distribution.