A novel mouse model of hepatocyte-specific apoptosis-induced myeloid cell-dominant sterile liver injury and repair response.

Apoptosis, inflammation, and wound healing are critical pathophysiological events associated with various liver diseases. Currently, there is a lack of in vivo approaches to study hepatocyte apoptosis-induced liver injury and repair. To address this critical knowledge gap, we developed a unique genetically modified mouse model, namely, 3-Transgene (Tg) with inducible Hepatocyte-Specific Apoptosis Phenotype (3xTg-iHAP) in this study. The 3xTg-iHAP mice possess three transgenes including Alb-Cre, Rosa26-rtTA, and tetO-Fasl on a B6 background. These mice are phenotypically normal, viable, and fertile. After subcutaneous administration of a single dose of doxycycline (5 mg/kg, Dox) to 3xTg-iHAP mice, we observed a complete histological spectrum of sterile liver wound-healing responses: asymptomatic hepatocyte apoptosis at 8 h, necrotic liver injury and sterile inflammation at 48 h, followed by hepatocyte mitosis and regeneration within 7 days. During the injury phase, the mice exhibited an increase in the biomarkers of alanine aminotransferase (ALT), chemokine (C-X-C motif) ligand 1 (CXCL1), and IL-6 in peripheral blood, as well as α-smooth muscle actin (α-SMA) protein in liver tissues. Conversely, the mice displayed a decrease in these markers in the recovery phase. Remarkably, this model shows that the sterile liver injury following elevated hepatocyte apoptosis is associated with an increase in myeloid cells in the liver. Within 7 days post-Dox administration, the liver of Dox-treated 3xTg-iHAP mice displays a normal histological structure, indicating the completion of wound healing. Together, we established a novel mouse model of injury and regeneration induced by hepatocyte apoptosis. This tool provides a robust in vivo platform for studying the pathophysiology of sterile liver inflammation, regeneration, and new therapeutic interventions for liver diseases.NEW & NOTEWORTHY Bu et al. present a triple-transgenic mouse model, namely, 3xTg-iHAP mice that are engineered to explore hepatocyte apoptosis-triggered sterile liver injury and regeneration. This model demonstrates a full spectrum of liver wound-healing responses from asymptomatic apoptosis to injury, myeloid cell-dominant sterile inflammation, and repair after induction of hepatocyte-specific apoptosis. The robust nature of this model makes it an invaluable in vivo tool for studying sterile liver inflammation, regeneration, and new therapeutic strategies.

The thermoelectric properties of CdBr, CdI, and Janus Cd2BrI monolayers with low lattice thermal conductivity.

The investigation and development of high thermoelectric value materials has become a research hotspot in recent years. In this work, based on the density functional theory on the Perdew-Burke-Ernzerhof (GGA-PBE) level, the thermoelectric properties of transition metal halides CdBr, Janus Cd2BrI, and CdI monolayers have been systematically investigated using Boltzmann transport theory. The calculation of the electronic band structure shows that these three materials have indirect band gap semiconductor properties. For carrier transport, the electron mobilities for CdBr, Janus Cd2BrI, and CdI monolayers are found to be 74, 16, 21 cm2 s-1 V-1 for p-type doping and 116, 102, 78 cm2 s-1 V-1 for n-type doping. Regarding their phonon transport, the CdBr, Cd2BrI, and CdI monolayers all have very low lattice thermal conductivity (4.78, 2.46, and 1.65 W m-1 K-1, respectively) that decreases with increasing temperature, which is favorable for obtaining large zT values. The electrical transport results show that the performance of p-type doping is better than that of n-type doping. At 300 K, the Seebeck coefficients of p-type doping for the CdBr, Cd2BrI, and CdI monolayers are 217.72, 246.43, and 226.24 µV K-1, respectively. In addition, we predict that the zT values of the CdBr, Cd2BrI, and CdI monolayers are 0.62, 1.64, and 0.87 for p-type doping at 300 K respectively. The zT values increase with the increase of temperature. In particular, the Janus Cd2BrI monolayer has a zT value of 3.03 at 600 K. These results suggest that all these materials can be good candidates for thermoelectric materials.

The coexistence of high piezoelectricity and superior optical absorption in Janus Bi2X2Y (X = Te, Se; Y = Te, Se, S) monolayers.

Bismuth chalcogenide and its derivatives have been attracting attention in various fields as semiconductors or topological insulators. Inspired by the high piezoelectric properties of Janus Bi2TeSeS monolayer and the excellent optical absorption properties of the Bi2X3 (X = Te, Se, S) monolayers, we theoretically predicted four new-type two-dimensional (2D) monolayers Janus Bi2X2Y (X = Te, Se; Y = Te, Se, S) using the first principles combined with density functional theory (DFT). The thermal, dynamic, and mechanical stabilities of Janus Bi2X2Y monolayers were confirmed based on ab initio molecular dynamics (AIMD) simulations, phonon dispersion, and elastic constants calculations. Their elastic properties, band structures, piezoelectric, and optical properties were systematically investigated. It was found that Janus Bi2X2Y monolayers have a typical Mexican hat-shaped valence band edge structure and, therefore, have a ring-shaped flat band edge, which results in their indirect band gaps. The results show that Janus Bi2X2Y monolayers are semiconductors with moderate band gaps (0.62-0.98 eV at the HSE + SOC level). After considering the electron-phonon renormalization (EPR), the band gaps are reduced by less than 5% at 0 K under the zero-point renormalization (ZPR) and further reduced by approximately 10% at 300 K. Besides, Janus Bi2X2Y monolayers also exhibit excellent optical absorption properties in the blue-UV light region, with the peak values at the order of 8 × 105 cm-1. Particularly, the Janus Bi2Te2S monolayer was found to exhibit a piezoelectric strain coefficient d11 of up to 20.30 pm V-1, which is higher than that of most of the 2D materials. Our results indicate that Janus Bi2X2Y monolayers could be promising candidates in solar cells, optical absorption, and optoelectronic devices; especially, a Janus Bi2Te2S monolayer can also be an excellent piezoelectric material with great prospects in the fields of mechanical and electrical energy conversion.

Electronic structure and magnetothermal properties of two-dimensional ScCl.

Two-dimensional ferromagnetic materials with intrinsic half-metallic properties have strong application advantages in nanoscale spintronics. Herein, density functional theory calculations show that monolayer ScCl is a ferromagnetic metallic material when undoped (n = 0), and the transition from metal to half-metal occurs with the continuous doping of holes. On the contrary, as the concentration of doped electrons increases, the system will exhibit metallic characteristics, which is particularly evident from a variation in spin polarizability. Furthermore, we have discussed how doped carriers affect the shape of the Fermi surface and the Fermi velocity of electrons. Most importantly, Monte Carlo simulations show that the ScCl monolayer is particularly regulated by carrier concentration (n) and magnetic field (h). Additionally, trends in energy and magnetic exchange coupling in different magnetic configurations (AFM phase and FM phase) with different doping concentrations are presented. When n < -0.16, the material is not only a half-metallic material that easily flips the magnetic axis, but also proves to be a candidate ferromagnetic material that works stably at room temperature in terms of dynamic stability. In addition, the origin of magnetocrystalline anisotropy is analyzed, and the contribution of different orbitals to spin-orbit coupling is presented. Moreover, we note that when magnetic field is small (h < 1 T), the change in size has a significant effect on ferromagnetic phase transition. However, when the system size is large (size >15 nm), TC is less sensitive to magnetic field. In addition, hole doping and size effect will greatly affect the hC of the system, but when the hole doping exceeds the critical value (n = -0.16), its influence on the hysteresis loop is no longer obvious. These interesting magnetic phenomena and easily adjustable physical properties show us that monolayer ScCl will be a promising functional material.

Equibiaxial strain regulates the electronic structure and mechanical, piezoelectric, and thermal transport properties of the 2H-phase monolayers CrX2 (X = S, Se, Te).

A superior piezoelectric coefficient and diminutive lattice thermal conductivity are advantageous for the application of a two-dimensional semiconductor in piezoelectric and thermoelectric devices, whereas an imperfect piezoelectric coefficient and large lattice thermal conductivity limit the practical application of the material. In this study, we investigate how the equibiaxial strain regulates the electronic structure, and mechanical, piezoelectric, and thermal transport properties. Tensile strain can deduce the bandgap of the monolayer CrX2 (X = S, Se, Te), whereas compressive strain has an opposite effect. Additionally, the transition from a semiconductor to a metal state and the transition between direct and indirect band gaps will occur at appropriate strain values, so the electronic structure can be effectively regulated. The reason is the different sensitivities of the energy corresponding to K and Γ on the valence band to the strain due to the changes in different orbital overlaps. The tensile strain can effectively improve the flexibility of monolayers CrX2, which provides a possibility for the application of flexible electronic devices. Furthermore, the tensile strain can improve the piezoelectric strain coefficient of monolayers CrX2. Using Slacks formulation, we calculate the lattice thermal conductivity, and the tensile biaxial strain can reduce the lattice thermal conductivity. Our research provides a strategy to enhance the piezoelectric and flexible electronic applications and decrease the lattice thermal conductivity, which can benefit the thermoelectric applications.

Intermolecular donor-acceptor stacking to suppress triplet exciton diffusion for long-persistent organic room-temperature phosphorescence.

Controlling triplet states is crucial to improve the efficiency and lifetime of organic room temperature phosphorescence (ORTP). Although the intrinsic factors from intramolecular radiative and non-radiative decay have been intensively investigated, the extrinsic factors that affect triplet exciton quenching are rarely reported. Diffusion to the defect sites inside the crystal or at the crystal surface may bring about quenching of triplet exciton. Here, the phosphorescence lifetime is found to have a negative correlation with the triplet exciton diffusion coefficient based on the density functional theory (DFT)/time-dependent density functional theory (TD-DFT) calculations on a series of ORTP materials. For systems with a weak charge transfer (CT) characteristic, close π-π stacking will lead to strong triplet coupling and fast triplet exciton diffusion in most cases, which is detrimental to the phosphorescence lifetime. Notably, for intramolcular donor-acceptor (D-A) type systems with a CT characteristic, intermolecular D-A stacking results in ultra-small triplet coupling, thus contributing to slow triplet diffusion and long phosphorescence lifetime. These findings shed some light on molecular design toward high-efficiency long persistent ORTP.

Janus 2H-MXTe (M = Zr, Hf; X = S, Se) monolayers with outstanding thermoelectric properties and low lattice thermal conductivities.

Two-dimensional (2D) materials have been one of the most popular objects in the research field of thermoelectric (TE) materials and have attracted substantial attention in recent years. Inspired by the synthesized 2H-MoSSe and numerous theoretical studies, we systematically investigated the electronic, thermal, and TE properties of Janus 2H-MXTe (M = Zr and Hf; X = S and Se) monolayers by using first-principles calculations. The phonon dispersion curves and AIMD simulations confirm the thermodynamic stabilities. Moreover, Janus 2H-MXTe were evaluated as indirect band-gap semiconductors with band gaps ranging from 0.56 to 0.90 eV using the HSE06 + SOC method. To evaluate the TE performance, firstly, we calculated the temperature-dependent carrier relaxation time with acoustic phonon scattering τac, impurity scattering τimp, and polarized scattering τpol. Secondly, the calculation of lattice thermal conductivity (κl) shows that these monolayers possess relatively poor κl with values of 3.4-5.4 W mK-1 at 300 K, which is caused by the low phonon lifetime and group velocity. After computing the electronic transport properties, we found that the n-type doped Janus 2H-MXTe monolayers exhibit a high Seebeck coefficient exceeding 200 µV K-1 at 300 K, resulting in a high TE power factor. Eventually, combining the electrical and thermal conductivities, the optimal dimensionless figure of merit (zT) at 300 K (900 K) can be obtained, which is 0.94 (3.63), 0.51 (2.57), 0.64 (2.72), and 0.50 (1.98) for n-type doping of ZrSeTe, HfSeTe, ZeSTe, and HfSTe monolayers. Particularly, the ZrSeTe monolayer shows the best TE performance with the maximal zT value. These results indicate the excellent application potential of Janus 2H-MXTe (M = Zr and Hf; X = S and Se) monolayers in TE materials.

Two-dimensional Janus pentagonal MSeTe (M = Ni, Pd, Pt): promising water-splitting photocatalysts and optoelectronic materials.

Inspired by the interesting and novel properties exhibited by Janus transition metal dichalcogenides (TMDs) and two-dimensional pentagonal structures, we here investigated the structural stability, mechanical, electronic, photocatalytic, and optical properties for a class of two-dimensional (2D) pentagonal Janus TMDs, namely penta-MSeTe (M = Ni, Pd, Pt) monolayers, by using density functional theory (DFT) combined with Hubbard's correction (U). Our results showed that these monolayers exhibit good structural stability, appropriate band structures for photocatalysts, high visible light absorption, and good photocatalytic applicability. The calculated electronic properties reveal that the penta-MSeTe are semiconductors with a bandgap range of 2.06-2.39 eV, and their band edge positions meet the requirements for water-splitting photocatalysts in various environments (pH = 0-13). We used stress engineering to seek higher solar-to-hydrogen (STH) efficiency in acidic (pH = 0), neutral (pH = 7) and alkaline (pH = 13) environments for penta-MSeTe from 0% to +8% biaxial and uniaxial strains. Our results showed that penta-PdSeTe stretched 8% along the y direction and demonstrates an STH efficiency of up to 29.71% when pH = 0, which breaks the theoretical limit of the conventional photocatalytic model. We also calculated the optical properties and found that they exhibit high absorption (13.11%) in the visible light range and possess a diverse range of hyperbolic regions. Hence, it is anticipated that penta-MSeTe materials hold great promise for applications in photocatalytic water splitting and optoelectronic devices.

Ferromagnetic vanadium disulfide VS2 monolayers with high Curie temperature and high spin polarization.

The structural, electronic, and magnetic properties of vanadium disulfide VS2 monolayers were investigated using first-principles calculations and Monte Carlo (MC) simulations. The results of molecular dynamics simulations and phonon dispersion showed that the VS2 monolayer has good dynamic and thermodynamic stabilities. Based on the results of the band structure, we also explore the effect of carrier concentrations on the spin gap, spin polarization and the direction of the easy magnetic axis. Our results demonstrated that doping an appropriate amount of holes can cause the reversal of the easy magnetic axis and maintain nearly 100% spin polarization, which greatly improves the application possibility of the VS2 monolayer as a spintronic device. The contribution of different orbits to the spin-orbit coupling (SOC) effect is given in magnetocrystalline anisotropy energy, which provides a theoretical basis for explaining the origin of magnetic crystal anisotropy. Based on the MC simulations, we also showed the influences of different parameters (carrier concentrations, magnetic field and crystal field) on the magnetothermal properties of the VS2 monolayer. It is found that the increase of hole doping concentrations can promote the increase of the Curie temperature, while the increase of electron doping concentrations will greatly weaken the Curie temperature. Furthermore, according to the influences of different parameters on the Curie temperature and spin polarization, we conclude that a suitably enhanced magnetic field and appropriate hole concentrations will not only make the system maintain high spin polarization, but also make the system exhibit ferromagnetic properties above room temperature.

Hexagonal warping effect in the Janus group-VIA binary monolayers with large Rashba spin splitting and piezoelectricity.

In this paper, the electronic band structure, Rashba effect, hexagonal warping, and piezoelectricity of Janus group-VIA binary monolayers STe2, SeTe2, and Se2Te are investigated based on density functional theory (DFT). Due to the inversion asymmetry and spin-orbit coupling (SOC), the STe2, SeTe2 and Se2Te monolayers exhibit large intrinsic Rashba spin splitting (RSS) at the Γ point with the Rashba parameters 0.19 eV Å, 0.39 eV Å, and 0.34 eV Å, respectively. Interestingly, based on the k·p model via symmetry analysis, the hexagonal warping effect and a nonzero spin projection component Sz arise at a larger constant energy surface due to nonlinear k3 terms. Then, the warping strength λ was obtained by fitting the calculated energy band data. Additionally, in-plane biaxial strain can significantly modulate the band structure and RSS. Furthermore, all these systems exhibit large in-plane and out-of-plane piezoelectricity due to inversion and mirror asymmetry. The calculated piezoelectric coefficients d11 and d31 are about 15-40 pm V-1 and 0.2-0.4 pm V-1, respectively, which are superior to those of most reported Janus monolayers. Because of the large RSS and piezoelectricity, the studied materials have great potential for spintronic and piezoelectric applications.

A pretreatment prediction model of grade 3 tumors classed by the IASLC grading system in lung adenocarcinoma.

PURPOSE: The new grading system for invasive nonmucinous lung adenocarcinoma (LUAD) in the 2021 World Health Organization Classification of Thoracic Tumors was based on a combination of histologically predominant subtypes and high-grade components. In this study, a model for the pretreatment prediction of grade 3 tumors was established according to new grading standards. METHODS: We retrospectively collected 399 cases of clinical stage I (cStage-I) LUAD surgically treated in Tianjin Chest Hospital from 2015 to 2018 as the training cohort. Besides, the validation cohort consists of 216 patients who were collected from 2019 to 2020. These patients were also diagnosed with clinical cStage-I LUAD and underwent surgical treatment at Tianjin Chest Hospital. Univariable and multivariable logistic regression analyses were used to select independent risk factors for grade 3 adenocarcinomas in the training cohort. The nomogram prediction model of grade 3 tumors was established by R software. RESULTS: In the training cohort, there were 155 grade 3 tumors (38.85%), the recurrence-free survival of which in the lobectomy subgroup was better than that in the sublobectomy subgroup (P = 0.034). After univariable and multivariable analysis, four predictors including consolidation-to-tumor ratio, CEA level, lobulation, and smoking history were incorporated into the model. A nomogram was established and internally validated by bootstrapping. The Hosmer-Lemeshow test result was χ2 = 7.052 (P = 0.531). The C-index and area under the receiver operating characteristic curve were 0.708 (95% CI: 0.6563-0.7586) for the training cohort and 0.713 (95% CI: 0.6426-0.7839) for the external validation cohort. CONCLUSIONS: The nomogram prediction model of grade 3 LUAD was well fitted and can be used to assist in surgical or adjuvant treatment decision-making.

High-Performance Organic Laser Semiconductor Enabling Efficient Light-Emitting Transistors and Low-Threshold Microcavity Lasers.

An organic light-emitting transistor (OLET) is a candidate device architecture for developing electrically pumped organic solid-state lasers, but it remains a critical challenge because of the lack of organic semiconductors that simultaneously possess a high solid-state emission efficiency (Φs), a high and balanced ambipolar mobility (µh,e), and a large stimulated emission cross-section. Here, we designed a molecule of 4,4'-bis(2-dibenzothiophenyl-vinyl)-biphenyl (DBTVB) and prepared its ultrathin single-crystal microplates with herringbone packing arrangements, which achieve balanced mobilities of µh = 3.55 ± 0.5 and µe = 2.37 ± 0.5 cm2 V-1 s-1, a high Φs of 85 ± 3%, and striking low-threshold laser characteristics. Theoretical and experimental investigations reveal that a strong electronic coupling and a small reorganization energy ensure efficient charge transport; meanwhile, the exciton-vibration effect and negligible π-π orbital overlap give rise to highly emissive H-aggregates and facilitate laser emission. Furthermore, OLET-based DBTVB crystals offer an internal quantum efficiency approaching 100% and a record-high electroluminescence external quantum efficiency of 4.03%.

Non-symmetric Half-Fused B←N Coordinated Diketopyrrolopyrrole Building Block for n-type Semiconducting Polymers.

The development of conjugated polymers with high semiconducting performance and high reliability is of great significance for flexible electronics. Herein, we developed a new type of electron-accepting building block; i.e., non-symmetric half-fused B←N coordinated diketopyrrolopyrrole (DPP) (HBNDPP), for amorphous conjugated polymers toward flexible electronics. The rigid B←N fusion part of HBNDPP endows the resulting polymers with decent electron transport, while its non-symmetric structure causes the polymer to exhibit multiple conformation isomers with flat torsional potential energies. Thus, it gets packed in an amorphous manner in solid state, ensuring good resistance to bending strain. Combined with hardness and softness, the flexible organic field-effect transistor devices exhibit n-type charge properties with decent mobility, good bending resistance, and good ambient stability. The preliminary study makes this building block a potential candidate for future design of conjugated materials for flexible electronic devices.

Feeding mode influences dynamic gut microbiota signatures and affects susceptibility to anti-CD3 mAb-induced intestinal injury in neonatal mice.

Feeding modes influence the gut microbiome, immune system, and intestinal barrier homeostasis in neonates; how feeding modes impact susceptibility to neonatal gastrointestinal (GI) diseases is still uncertain. Here, we investigated the impact of dam feeding (DF) and formula feeding (FF) on features of the gut microbiome and physiological inflammation during the first 2 days of postnatal development and on the susceptibility to intestinal injury related to the inflammatory state in neonatal mouse pups. 16S rRNA sequencing data revealed microbiome changes, lower α-diversity, and a distinct pattern of ß-diversity including expansion of f_Enterobacteriaceae and f_Enterococcaceae in the ileum of FF pups compared with DF pups by postnatal day (P)2. Together with gut dysbiosis, the FF cohort also had greater ileal mucosa physiological inflammatory activity compared with DF pups by P2 but maintained normal histological features. Interestingly, FF but not DF mouse pups developed necrotizing enterocolitis (NEC)-like intestinal injury within 24 h after anti-CD3 mAb treatment, suggesting that FF influences the susceptibility to intestinal injury in neonates. We further found that NEC-like incidence in anti-CD3 mAb-treated FF neonatal pups was attenuated by antibiotic treatment. Collectively, our data suggest that FF predisposes mouse pups to anti-CD3 mAb-induced intestinal injury due to abnormal f_Enterobacteriaceae and f_Enterococcaceae colonization. These findings advance our understanding of FF-associated microbial colonization and intestinal inflammation, which may help inform the development of new therapeutic approaches to GI diseases like NEC in infants.NEW & NOTEWORTHY This report shows that a feeding mode profoundly affects gut colonization in neonatal mice. Furthermore, our results demonstrate that formula feeding predisposes mouse pups to anti-CD3 mAb-induced necrotizing enterocolitis (NEC)-like intestinal injury upon inadequate microbial colonization. The study suggests the role of the combined presence of formula feeding-associated dysbiosis and mucosal inflammation in the pathogenesis of NEC and provides a new mouse model to study this disease.

Deep-subwavelength gap modes in all-dielectric metasurfaces for high-efficiency and large-angle wavefront bending.

All-dielectric, phase-gradient metasurfaces manipulate light via a judiciously designed planar distribution of high and low refractive indices. In the established design approaches, the high-index elements play a dominant role, while the electromagnetic field existing between these elements is routinely viewed as either an incidental by-product or detrimental crosstalk. Here we propose an alternative approach that concentrates on exploring the low-index materials for wavefront shaping. In our Si metasurface, the low-index air gap between adjacent Si fins is judiciously tuned, while the high-index Si fins only have a single size across the whole metasurface. These gap modes provide the full 2π phase coverage, as well as high and relatively uniform transmission, at the deep-subwavelength scale. These characteristics are ideal for mapping a steep phase gradient, consequently suitable for high-efficiency and large-angle wavefront bending. This light manipulation capability is exemplified with numerical simulation in PW-SW (freely propagating wave to surface wave) conversion, where the wavefront is deflected by an angle of 90°. In the gap-mode meta-converters, the average unit size can be only 1/60 of free-space wavelength, an order of magnitude smaller than that of conventional all-dielectric metasurfaces. Their conversion efficiency can reach 68%, the highest value reported for any all-dielectric gradient metasurface THz converter.

A first-principles study on the electronic, piezoelectric, and optical properties and strain-dependent carrier mobility of Janus TiXY (X ≠ Y, X/Y = Cl, Br, I) monolayers.

Janus transition metal dichalcogenide monolayers (TMDs) have attracted wide attention due to their unique physical and chemical properties since the successful synthesis of the MoSSe monolayer. However, the related studies of Janus monolayers of transition metal halides (TMHs) with similar structures have rarely been reported. In this article, we systematically investigate the electronic properties, piezoelectric properties, optical properties, and carrier mobility of new Janus TiXY (X ≠ Y, X/Y = Cl, Br, I) monolayers using first principles calculations for the first time. These Janus TiXY monolayers are thermally, dynamically, and mechanically stable, and their energy bands near the Fermi level (EF) are almost entirely contributed by the central Ti atom. Besides, the Janus TiXY monolayers exhibit excellent in-plane and out-of-plane piezoelectric effects, especially with an in-plane piezoelectric coefficient of ∼4.58 pm V-1 for the TiBrI monolayer and an out-of-plane piezoelectric coefficient of ∼1.63 pm V-1 for the TiClI monolayer, suggesting their promising applications in piezoelectric sensors and energy storage applications. The absorption spectra of Janus TiXY monolayers are mainly distributed in the visible and infrared regions, implying that they are fantastic candidates for photoelectric and photovoltaic applications. The obtained carrier mobilities revealed that TiXY monolayers are hole-type semiconductors. Under uniaxial compressive strain, the hole mobilities of these monolayers are gradually improved, indicating that TiXY monolayers have potential applications in the field of flexible electronic devices.

An ab initio study of two-dimensional anisotropic monolayers ScXY (X = S and Se; Y = Cl and Br) for photocatalytic water splitting applications with high carrier mobilities.

Recently, metal oxyhalides have been broadly studied due to their hierarchical structures and promising functionalities. Herein, a thorough study of newly modeled monolayers ScXY (X = S and Se; Y = Cl and Br), a class of derivates of ScOBr monolayers, was conducted using first-principles calculations. We theoretically confirm that these ScXY monolayers are mechanically, dynamically, and thermally stable. Young's modulus and Poisson's ratio calculated for all these ScXY monolayers obviously exhibit anisotropic properties. All these monolayers are indirect-gap semiconductors with bandgaps in the range of 2.35-3.18 eV, and their conduction band minimum (CBM) and valence band maximum (VBM) can straddle the reduction and oxidation potential of water very well, respectively. Particularly, ScSeCl and ScSeBr monolayers have the most propitious bandgaps and band alignments to be used as promising photocatalysts, and the predicted carrier mobility is much larger than that of many other two-dimensional materials. Moreover, the predicted anisotropic carrier mobilities and indirect bandgaps will diminish the recombination and facilitate the migration of photo-generated electron and hole pairs. Moreover, biaxial strain (-5% to 5%) effects on the band alignments and bandgaps are discussed. Our findings highlight that ScSeCl and ScSeBr monolayers are envisioned to act as promising photocatalytic and photoelectronic materials with anisotropic ultrahigh carrier mobilities.

Electronic and thermoelectric properties of semiconducting Bi2SSe2 and Bi2S2Se monolayers with high optical absorption.

Bismuth telluride (Bi2Te3) and its derivatives are often focused on as thermoelectric materials around room temperature. In this work, we theoretically predicted two new types of Bi2Te3-based two-dimensional materials Bi2SSe2 and Bi2S2Se using density functional theory (DFT) combined with Boltzmann transport theory. The thermal, dynamic, and mechanical stabilities of Bi2SSe2 and Bi2S2Se monolayers are confirmed using ab initio molecular dynamics (AIMD) simulations, phonon dispersion, and elastic constant calculations. The phonon transport properties, including lattice thermal conductivity, group velocity, Grüneisen parameter, converged scattering rate, and phonon lifetimes contributed by different branches, are systematically investigated. The electronic and thermoelectric properties, including carrier mobility (µ), Seebeck coefficient (S), electrical conductivity (σ), power factors, and figure of merit (zT) along the zigzag and armchair directions as a function of carrier concentration at different temperatures, are also investigated. It is found that the Bi2SSe2 and Bi2S2Se monolayers have moderate indirect band gaps (0.92 eV and 1.08 eV at the PBE level, respectively) and low lattice thermal conductivities (4.35 and 5.37 W m-1 K-1 at 300 K, respectively). The largest zT values of Bi2SSe2 and Bi2S2Se monolayers are 0.50 and 0.28 at 300 K and 1.39 and 0.93 at 700 K for p-doping types, respectively. The Bi2SSe2 and Bi2S2Se monolayers are predicted to show high optical absorption peaks at 8 × 105 cm-1 in the visible and near-UV light region, respectively. Our results indicate that both Bi2SSe2 and Bi2S2Se could be promising candidates in energy conversion, solar cells, and optoelectronic devices.

Iron overload impairs renal function and is associated with vascular calcification in rat aorta.

Vascular calcification (VC) has been associated with a risk of cardiovascular diseases. Iron may play a critical role in progressive VC. Therefore, we investigated the effects of iron overload on the aorta of rats. A rat model of iron overload was established by intraperitoneal injection of Iron-Dextran. The levels of iron, calcium, and ALP activity were detected. Von Kossa staining and Perl's staining were conducted. The expression of iron metabolism-related and calcification related factors were examined in the aortic tissue of rats. The results showed serum and aortic tissue iron were increased induced by iron overload and excessive iron induced hepatic and renal damage. In iron overload rats, the expression of divalent metal transporter 1 (DMT1) and hepcidin were higher, but ferroportin1 (FPN1) was lower. Von Kossa staining demonstrated calcium deposition in the aorta of iron overload rats. The calcium content and ALP activity in serum and aortic tissue were increased and iron level in aortic tissue highly correlated with calcium content and ALP activity. The expressions of the osteogenic markers were increased while a decrease of Alpha-smooth muscle actin (α-SMA) in the aortic tissue of iron overload rats. IL-24 was increased during the calcification process induced by iron. Overall, we demonstrated excessive iron accumulation in the aortic tissue and induced organs damage. The iron metabolism-related factors were significantly changed during iron overload. Moreover, we found that iron overload leads to calcium deposition in aorta, playing a key role in the pathological process of VC by mediating osteoblast differentiation factors.

C1QBP regulates apoptosis of renal cell carcinoma via modulating xanthine dehydrogenase (XDH) mediated ROS generation.

Background: Complement component 1 Q subcomponent binding protein (C1QBP) plays a vital role in the progression and metabolism of cancer. Studies have shown that xanthine dehydrogenase (XDH)-derived reactive oxygen species (ROS) accelerates tumor growth, and also induces mutations or produces cytotoxic effects concurrently. However, the role of C1QBP in metabolism, oxidative stress, and apoptosis of renal cell carcinoma (RCC) cells have not yet been explored. Methods: Metabolomics assay was applied to investigate the role of C1QBP in RCC metabolism. C1QBP knockdown and overexpression cells were established via lentiviral infection and subjected to apoptosis and ROS assay in vitro. RNA stability assay was applied to characterize the mechanism of C1QBP regulating XDH transcription. In vivo, orthotopic tumor xenografts assay was performed to investigate the role of C1QBP in RCC progression. Results: Metabolomics investigation revealed that C1QBP dramatically diminished the hypoxanthine content in RCC cells. C1QBP promoted the mRNA and protein expression of hypoxanthine catabolic enzyme XDH. Meanwhile, C1QBP may affect XDH transcription by regulating the mRNA level of XDH transcriptional stimulators IL-6, TNF-α, and IFN-γ. Moreover, the expression of C1QBP and XDH was lower in RCC tumors compared with the tumor-associated normal tissues, and their down-regulation was associated with higher Fuhrman grade. C1QBP significantly increased ROS level, apoptosis, and the expression of apoptotic proteins such as cleaved caspase-3 and bax/bcl2 via regulating XDH. Conclusion: C1QBP promotes the catabolism of hypoxanthine and elevates the apoptosis of RCC cells by modulating XDH-mediated ROS generation.