Orientation Sensitive SEIRA Sensors Based on Single-Walled Carbon Nanotube Near Fields.

Molecular vibrations that bear information about intrinsic properties of chemical compounds are challenging to detect at submonolayer densities. Surface-enhanced infrared absorption (SEIRA) spectroscopy has been proven to be a viable approach to enhance and detect weak vibration signals. Here, we report a SEIRA sensor based on mid-infrared surface plasmon resonances supported by single-walled carbon nanotubes (SWCNTs). Due to the 1D nature of SWCNTs, their plasmon modes are highly polarized with the electromagnetic fields spatially confined to nanometer scales. Leveraging these characteristics of SWCNTs, we observe a polarization selective coupling between their surface plasmons and vibrational modes of chemical bonds introduced onto their surfaces. A maximum modulation of ∼15% to the plasmon resonance peak is obtained for a submonolayer chemical group coverage. These findings suggest that SWCNTs may potentially serve as a highly sensitive SEIRA platform for revealing intricate information about molecular compositions and bond orientations.

Radiative pumping in a strongly coupled microcavity filled with a neat molecular film showing excimer emission.

Strong light-matter interactions have attracted much attention as a means to control the physical/chemical properties of organic semiconducting materials with light-matter hybrids called polaritons. To unveil the processes under strong coupling, studies on the dynamics of polaritons are of particular importance. While highly condensed molecular materials with large dipole density are ideal to achieve strong coupling, the emission properties of such films often become a mixture of monomeric and excimeric components, making the role of excimers unclear. Here, we use amorphous neat films of a new bis(phenylethynyl anthracene) derivative showing only excimer emission and investigate the excited-state dynamics of a series of strongly coupled microcavities, with each cavity being characterised by a different exciton-photon detuning. A time-resolved photoluminescence study shows that the excimer radiatively pumps the lower polariton in the relaxation process and the decay profile reflects the density of states. The delayed emission derived from triplet-triplet annihilation is not sensitive to the cavity environment, possibly due to the rapid excimer formation. Our results highlight the importance of controlling intermolecular interactions towards rational design of organic exciton-polariton devices, whose performance depends on efficient polariton relaxation pathways.

Strong coupling in mechanically flexible free-standing organic membranes.

Strong coupling of a confined optical field to the excitonic or vibronic transitions of a molecular material results in the formation of new hybrid states called polaritons. Such effects have been extensively studied in Fabry-Pèrot microcavity structures where an organic material is placed between two highly reflective mirrors. Recently, theoretical and experimental evidence has suggested that strong coupling can be used to modify chemical reactivity as well as molecular photophysical functionalities. However, the geometry of conventional microcavity structures limits the ability of molecules "encapsulated" in a cavity to interact with their local environment. Here, we fabricate mirrorless organic membranes that utilize the refractive index contrast between the organic active material and its surrounding medium to confine an optical field with Q-factor values up to 33. Using angle-resolved white light reflectivity measurements, we confirm that our structures operate in the strong coupling regime, with Rabi-splitting energies between 60 and 80 meV in the different structures studied. The experimental results are matched by transfer matrix and coupled oscillator models that simulate the various polariton states of the free standing membranes. Our work demonstrates that mechanically flexible and easy-to-fabricate free standing membranes can support strong light-matter coupling, making such simple and versatile structures highly promising for a range of polariton applications.

Observation of photon-mode decoupling in a strongly coupled multimode microcavity.

We have fabricated organic semiconductor microcavities having an extended optical path-length (up to 2 µm) that contain J-aggregates of a cyanine dye. These structures are studied using optical-reflectivity and are found to be characterized by a series of polaritonic modes. By changing the effective oscillator strength of the dye within the cavity, we evidence a transition from "normal" strong coupling in which the photon modes are coupled to one another via the excitonic transition of the molecular dye to a state in which photon-modes become decoupled. We use an eight-level modified Hamiltonian to describe the optical properties of the system and compare the distribution of the confined optical field in coupled and decoupled structures.

Untargeted effects in organic exciton-polariton transient spectroscopy: A cautionary tale.

Strong light-matter coupling to form exciton- and vibropolaritons is increasingly touted as a powerful tool to alter the fundamental properties of organic materials. It is proposed that these states and their facile tunability can be used to rewrite molecular potential energy landscapes and redirect photophysical pathways, with applications from catalysis to electronic devices. Crucial to their photophysical properties is the exchange of energy between coherent, bright polaritons and incoherent dark states. One of the most potent tools to explore this interplay is transient absorption/reflectance spectroscopy. Previous studies have revealed unexpectedly long lifetimes of the coherent polariton states, for which there is no theoretical explanation. Applying these transient methods to a series of strong-coupled organic microcavities, we recover similar long-lived spectral effects. Based on transfer-matrix modeling of the transient experiment, we find that virtually the entire photoresponse results from photoexcitation effects other than the generation of polariton states. Our results suggest that the complex optical properties of polaritonic systems make them especially prone to misleading optical signatures and that more challenging high-time-resolution measurements on high-quality microcavities are necessary to uniquely distinguish the coherent polariton dynamics.

Ultralong-Range Polariton-Assisted Energy Transfer in Organic Microcavities.

Non-radiative energy transfer between spatially-separated molecules in a microcavity can occur when an excitonic state on both molecules are strongly-coupled to the same optical mode, forming so-called "hybrid" polaritons. Such energy transfer has previously been explored when thin-films of different molecules are relatively closely spaced (≈100 nm). In this manuscript, we explore strong-coupled microcavities in which thin-films of two J-aggregated molecular dyes were separated by a spacer layer having a thickness of up to 2 µm. Here, strong light-matter coupling and hybridisation between the excitonic transition is identified using white-light reflectivity and photoluminescence emission. We use steady-state spectroscopy to demonstrate polariton-mediated energy transfer between such coupled states over "mesoscopic distances", with this process being enhanced compared to non-cavity control structures.

Tuning the Coherent Propagation of Organic Exciton-Polaritons through Dark State Delocalization.

While there have been numerous reports of long-range polariton transport at room-temperature in organic cavities, the spatiotemporal evolution of the propagation is scarcely reported, particularly in the initial coherent sub-ps regime, where photon and exciton wavefunctions are inextricably mixed. Hence the detailed process of coherent organic exciton-polariton transport and, in particular, the role of dark states has remained poorly understood. Here, femtosecond transient absorption microscopy is used to directly image coherent polariton motion in microcavities of varying quality factor. The transport is found to be well-described by a model of band-like propagation of an initially Gaussian distribution of exciton-polaritons in real space. The velocity of the polaritons reaches values of ≈ 0.65 × 106 m s-1 , substantially lower than expected from the polariton dispersion. Further, it is found that the velocity is proportional to the quality factor of the microcavity. This unexpected link between the quality-factor and polariton velocity is suggested to be a result of varying admixing between delocalized dark and polariton states.

Flexible, Free-Standing Polymer Membranes Sensitized by CsPbX3 Nanocrystals as Gain Media for Low Threshold, Multicolor Light Amplification.

Lead halide perovskite nanocrystals (NCs) are highly suitable active media for solution-processed lasers in the visible spectrum, owing to the wide tunability of their emission from blue to red via facile ion-exchange reactions. Their outstanding optical gain properties and the suppressed nonradiative recombination losses stem from their defect-tolerant nature. In this work, we demonstrate flexible waveguides combining the transparent, bioplastic, polymer cellulose acetate with green CsPbBr3 or red-emitting CsPb(Br,I)3 NCs in simple solution-processed architectures based on polymer-NC multilayers deposited on polymer micro-slabs. Experiments and simulations indicate that the employment of the thin, free-standing membranes results in confined electrical fields, enhanced by 2 orders of magnitude compared to identical multilayer stacks deposited on conventional, rigid quartz substrates. As a result, the polymer structures exhibit improved amplified emission characteristics under nanosecond excitation, with amplified spontaneous emission (ASE) thresholds down to ∼95 µJ cm-2 and ∼70 µJ cm-2 and high net modal gain up to ∼450 and ∼630 cm-1 in the green and red parts of the spectrum, respectively. The optimized gain properties are accompanied by a notable improvement of the ASE operational stability due to the low thermal resistance of the substrate-less membranes and the intimate thermal contact between the polymer and the NCs. Their application potential is further highlighted by the membrane's ability to sustain dual-color ASE in the green and red parts of the spectrum through excitation by a single UV source, activate underwater stimulated emission, and operate as efficient white light downconverters of commercial blue LEDs, producing high-quality white light emission, 115% of the NTSC color gamut.

Polariton condensation in an organic microcavity utilising a hybrid metal-DBR mirror.

We have developed a simplified approach to fabricate high-reflectivity mirrors suitable for applications in a strongly-coupled organic-semiconductor microcavity. Such mirrors are based on a small number of quarter-wave dielectric pairs deposited on top of a thick silver film that combine high reflectivity and broad reflectivity bandwidth. Using this approach, we construct a microcavity containing the molecular dye BODIPY-Br in which the bottom cavity mirror is composed of a silver layer coated by a SiO2 and a Nb2O5 film, and show that this cavity undergoes polariton condensation at a similar threshold to that of a control cavity whose bottom mirror consists of ten quarter-wave dielectric pairs. We observe, however, that the roughness of the hybrid mirror-caused by limited adhesion between the silver and the dielectric pair-apparently prevents complete collapse of the population to the ground polariton state above the condensation threshold.

Potassium iodide reduces the stability of triple-cation perovskite solar cells.

The addition of alkali metal halides to hybrid perovskite materials can significantly impact their crystallisation and hence their performance when used in solar cell devices. Previous work on the use of potassium iodide (KI) in active layers to passivate defects in triple-cation mixed-halide perovskites has been shown to enhance their luminescence efficiency and reduce current-voltage hysteresis. However, the operational stability of KI passivated perovskite solar cells under ambient conditions remains largely unexplored. By investigating perovskite solar cell performance with SnO2 or TiO2 electron transport layers (ETL), we propose that defect passivation using KI is highly sensitive to the composition of the perovskite-ETL interface. We reconfirm findings from previous reports that KI preferentially interacts with bromide ions in mixed-halide perovskites, and - at concentrations >5 mol% in the precursor solution - modifies the primary absorber composition as well as leading to the phase segregation of an undesirable secondary non-perovskite phase (KBr) at high KI concentration. Importantly, by studying both material and device stability under continuous illumination and bias under ambient/high-humidity conditions, we show that this secondary phase becomes a favourable degradation product, and that devices incorporating KI have reduced stability.