Empirical analysis of cost-effective and equitable solid waste management systems: Environmental and economic perspectives.

The solid waste management (SWM) system is in a transitional phase in developing economies, and local municipalities and waste management companies are stepping toward integrating a waste treatment approach in the scheme of waste handling. However, there is an urgent need to explore cost-effective techniques, models, and potential revenue streams to sustain the state-run waste sector self-sufficiently. The proposed SWM model aims to support the local waste sector in Islamabad, the capital city of Pakistan, with 100% service area coverage to attain environmental and economic sustainability by defining dedicated waste collection streams to ensure quality material recovery under a cost-effective approach and modality. The innovative approach is applied to allocate the tonnage to various streams as per the city's current land use plan. The estimated/cost of the cleanliness services will be USD13.1 million per annum with an estimated per ton cost of USD 23. The establishment of the proposed material recovery facility (MRF) will process about 500 t/d of waste to produce 45 t/d compost and recover 130 t/d of recyclables. The environmentally friendly model saves 2.4 million tons of CO2‒eq/month from composting and recycling. The average economic potential from MRF and debris-crushing plants, including environmental benefit value, is calculated as USD 3.97 million annually. Recovery of services fee (70%) for various collection streams based on city land use and socio-economic conditions will generate revenue of USD 7.33 million annually. The total revenue will be USD 11.31 million (86% of total annual expenditures) to track the sector's self-sufficiency. To successfully reach the Sustainable Development Goals (SDGs) and Nationally Determined Contributions (NDCs), engaging the private sector from environmentally advanced economies to collaborate in the waste sector to enhance local technical capabilities is recommended.

Phytochemical characterization and anti-arthritic potential of Croton bonplandianus leaves extract: In-vivo and in-silico approach.

Croton bonplandianus, a natural source traditionally used for treating various illnesses, including rheumatoid arthritis, was evaluated in this study. The effects of ethanolic extracts (CBEE) and aqueous fractions (CBAF) of C. bonplandianus leaves on arthritis-induced inflammation were studied using an albino rat model of inflammation induced by Freund's complete adjuvant. Eight test groups (n = 5 per group) and one vehicle control were used to evaluate the antiarthritic effects of different doses of CBEE and CBAF (125 mg.kg-1, 250 mg.kg-1, and 500 mg.kg-1) on days 5, 10, 15, and 20 compared to arthritic and vehicle controls. Arthritis severity was assessed using macroscopic arthritis grading, histological analysis, body weights, and paw thickness. CBEE and CBAF were found to reduce the prevalence of arthritis, increase body weight, and decrease paw inflammation compared to the vehicle control group by the 23rd day. In addition, they showed no effect on biochemical parameters, but a significant difference (p < 0.05) in hematological parameters compared to the arthritic control group. The study identified Hentriacontane compound as a potential contributor to the anti-inflammatory effect of C. bonplandianus, as it showed the lowest dock score for IL-1ß and IL-6. Palmitoylethanol amide was identified as a potential contributor to the anti-inflammatory effect of TNF-α. Gene expression of IL-6, IL-1ß, and TNF-α was down-regulated significantly (p < 0.05) in a dose-dependent manner in all treatment groups compared to the arthritic control group. In conclusion, this study validated the anti-arthritic and anti-inflammatory properties of CBEE and CBAF in a time and dose-dependent manner.

Piperine phytosomes for bioavailability enhancement of domperidone.

The markedly low oral bioavailability of domperidone (anti-emetic drug) is associated with rapid first-pass metabolism in the intestine and liver. To counteract such affects, there is a need to devise a strategy to enhance absorption and subsequently bioavailability. Thus, the current study was aimed at synthesizing phytosomes consisting of phosphatidylcholine and piperine (a P-glycoprotein inhibitor). Phytosomes were prepared by salting-out method. The developed phytosomes were extensively characterized for size, zeta potential, polydispersity index, entrapment efficiency (EE %), infra-red spectroscopy, X-ray diffraction, in vitro drug release, ex vivo permeation, in vivo pharmacokinetic and toxicity. The engineered formulations of phytosomes with piperine exhibited a significant improvement in oral bioavailability of domperidone (79.5%) in comparison with the pure drug suspension under the same conditions. Pharmacokinetic parameters such as maximal plasma concentration (Cmax) and the plasma concentration (estimated from area under the curve; AUC) of domperidone have been greatly increased relative to drug alone. The improved drug absorption was attributed to inhibition of P-glycoprotein transporter. The findings of current research work suggest that the optimized phytosomes based drug delivery containing phytochemicals as bioenhancers have the potential to improve bioavailability of poorly bioavailable drugs that are substrate to P-glycoprotein.

MUCO-DIS: a New AFM-Based Nanoscale Dissolution Technique.

Mucoadhesion-based drug delivery systems have recently gained interest because of their bio-adhesion capability, which results in enhanced residence time leading to prolonged duration of action with the mucosal surface, potentially improving compliance and convenience. Mucoadhesion testing of these formulations is widely reported; however, this is technically challenging due to the absence of any standard methods and difficulty in conducting mucoadhesion, formulation-mucosal surface interaction, mucosal surface topography and drug release in a single experiment. As these measurements are currently conducted separately, on replicate formulations, results can often be subjective and difficult to correlate. Hence, the aim of the present study was to develop a new AFM-based single-entity ex vivo muco-dissolution (MUCO-DIS) technique to simultaneously evaluate mucoadhesion force, 3D surface topography, polymer dissolution and drug release characteristics. To demonstrate the potential of the current technique, the interactions between model pectin microparticles containing metformin HCl and a range of gastrointestinal mucosal surfaces (gastric, small intestine, large intestine and buccal) were studied. This novel system has not only successfully determined the mucoadhesion force, polymer dissolution and drug release information but has also highlighted the difference in microparticle performance with different mucosal targets. The current work has highlighted the potential of this newly developed MUCO-DIS system and we believe this will be a valuable tool for characterising these popular pharmaceutical formulations. This technique could also provide an opportunity to other scientific fields to evaluate materials, substrate behaviour and their interactions in their hydrated state at nanoscale with real-time chemical and surface mapping.

Formulation and characterization of lornoxicam-loaded cellulosic-microsponge gel for possible applications in arthritis.

Rheumatoid arthritis (RA) is an autoimmune disease associated with severe joint pain. Herein, we report lornoxicam loaded cellulosic microsponge gel formulation with sustained anti-inflammatory effects that are required to manage arthritic pain. The microsponges were formulated using quasi emulsion-solvent diffusion method employing four different surfactant systems, namely polyvinyl alcohol (PVA), Tween80, Gelucire 48/16 and Gelucire 50/13. All the lornoxicam loaded microsponge formulations were extensively characterized with a variety of analytical tools. The optimized microsponge formulation was then converted into gel formulation. The lornoxicam loaded microsponge gel formulation had adequate viscosity and sufficient pharmaceutical properties as confirmed by the texture analysis and the drug release followed Super case II transport. It is noteworthy that we described the preparation of a new cellulosic polymers based microsponge system for delivery of lornoxicam to provide quick as well as lasting (sustained) anti-inflammatory effects in rats using carrageenan induced rat paw edema model. We were able to demonstrate a 72% reduction in inflammation within 4 h using the optimize transdermal gel formulation utilizing Transcutol P as permeation enhancer and with the aid of skin micro-piercing by microneedles, hence, demonstrating the potential of this microsponge gel formulation in arthritis management.

Correction: Alhasso et al. Development of a Nanoemulgel for the Topical Application of Mupirocin. Pharmaceutics 2023, 15, 2387.

Simon P [...].

Pharmacist-led interventions in optimising the use of oral anticoagulants in patients with atrial fibrillation in general practice in England: a retrospective observational study.

BACKGROUND: Oral anticoagulation (OAC) is the mainstay of treatment for the prevention of strokes in patients with atrial fibrillation (AF). Direct oral anticoagulants (DOACs) account for increasing OAC in patients with AF. However, prescribing DOACs for patients with established AF poses various challenges and general practice pharmacists may have an important role in supporting their management. AIM: To investigate the effectiveness of pharmacist-led interventions in general practice in optimising the use of OAC therapies in AF. DESIGN & SETTING: A retrospective observational study in general practices in Bradford. METHOD: The data were collected retrospectively from 1 November 2018-31 December 2019 using electronic health record data. The data were analysed: 1) to identify patients with AF not on OAC; 2) to describe inappropriate DOAC prescriptions; and 3) to calculate HAS-BLED scores. RESULTS: Overall, 76.3% (n = 470) of patients with AF received OAC therapy, and of these, 63.4% received DOACs. Pharmacist-led interventions increased DOAC prescribing by 6.0% (P = 0.03). Inappropriate DOAC use was identified in 24.5% of patients with AF, with underdosed and overdosed identified in 9.7% and 14.8%, respectively. Post-intervention, inappropriate prescribing was reduced to 1.7%. The mean HAS-BLED score decreased from 3.00 to 2.22 (P<0.01). Successful transition from vitamin K antagonist (VKA) therapy to DOACs was achieved in 25.7% of patients. CONCLUSION: Pharmacist-led interventions have successfully improved the use of OAC therapies in patients with AF, and effectively managed the bleeding risks and transition from VKA to DOAC therapy, in line with guidelines.

Modelling the Nexus of municipal solid waste sector for climate resilience and adaptation to nature-based solutions: A case study of Pakistan.

Municipal solid waste management is a major concern in developing economies, requiring collective international efforts to achieve carbon neutrality by diverting waste from disposal facilities. This study aims to highlight the importance of the waste sector as it has the potential to significantly contribute to climate change and its toxicity impact on the local ecosystem. Out of the total municipal solid waste generated, only 78 % is collected, either open dumped or thrown in sanitary landfills. The waste sector's ecological impact value is calculated for the Earth's regions, and it is very high at >50 % in Africa, Asia, Latin America and the Caribbean. This sectoral impact value is mainly responsible for greenhouse gas emissions and degradation of the local ecosystem health. Current business‒as‒usual practices attribute 3.42 % of global emissions to the waste sector. Various scenarios are developed based on waste diversion and related emissions modelling, and it is found that scenarios 3 and 4 will support the policymakers of the regions in attaining zero carbon footprints in the waste sector. Our findings conclude that cost-effective nature-based solutions will help low‒income countries reduce emissions from disposal sites and significantly improve the local ecosystem's health. Developed economies have established robust waste‒handling policies and implementation frameworks, and there is a need for collaboration and knowledge sharing with developing economies at the regional level to sustain the sector globally.

Development of Nanoemulsions for Topical Application of Mupirocin.

Mupirocin (MUP) is a topical antibacterial agent used to treat superficial skin infections but has limited application due to in vivo inactivation and plasma protein binding. A nanoemulsion formulation has the potential to enhance the delivery of mupirocin into the skin. MUP-loaded nanoemulsions were prepared using eucalyptus oil (EO) or eucalyptol (EU), Tween® 80 (T80) and Span® 80 (S80) as oil phase (O), surfactant (S) and cosurfactant (CoS). The nanoemulsions were characterised and their potential to enhance delivery was assessed using an in vitro skin model. Optimised nanoemulsion formulations were prepared based on EO (MUP-NE EO) and EU (MUP-NE EU) separately. MUP-NE EO had a smaller size with mean droplet diameter of 35.89 ± 0.68 nm and narrower particle size index (PDI) 0.10 ± 0.02 nm compared to MUP-NE EU. Both nanoemulsion formulations were stable at 25 °C for three months with the ability to enhance the transdermal permeation of MUP as compared to the control, Bactroban® cream. Inclusion of EU led to a two-fold increase in permeation of MUP compared to the control, while EO increased the percentage by 48% compared to the control. Additionally, more MUP was detected in the skin after 8 h following MUP-NE EU application, although MUP deposition from MUP-NE EO was higher after 24 h. It may be possible, through choice of essential oil to design nanoformulations for both acute and prophylactic management of topical infections.

Development of a Nanoemulgel for the Topical Application of Mupirocin.

Mupirocin (MUP) is an effective topical antibiotic with poor skin permeability; however, its skin permeability can be improved by a nanoemulsion formulation based on eucalyptus oil or eucalyptol. Despite this improvement, the nanoemulsion has limitations, such as low viscosity, low spreadability, and poor retention on the skin. To overcome these limitations, the aim of this study was to develop a nanoemulgel formulation that would enhance its rheological behaviour and physicochemical properties. The MUP nanoemulgel was prepared by incorporating a preprepared MUP nanoemulsion into Carbopol gel at a concentration of 0.75% in a 1:1 ratio. The nanoemulgel formulations were characterised and evaluated for their physicochemical and mechanical strength properties, rheological behaviour, and in vitro skin permeation and deposition, as well as antibacterial studies. Both nanoemulgels exhibited stability at temperatures of 4 and 25 °C for a period of 3 months. They had a smooth, homogenous, and consistent appearance and displayed non-Newtonian pseudoplastic behaviour, with differences in their viscosity and spreadability. However, both nanoemulgels exhibited lower skin permeability compared to the marketed control. The local accumulation efficiency of MUP from nanoemulgel after 8 h was significantly higher than that of the control, although there was no significant difference after 24 h. Micro-CT scan imaging allowed visualisation of these findings and interpretation of the deposited drug spots within the layers of treated skin. While there were no significant differences in the antibacterial activities between the nanoemulgels and the control, the nanoemulgels demonstrated superiority over the control due to their lower content of MUP. These findings support the potential use of the nanoemulgel for targeting skin lesions where high skin deposition and low permeability are required, such as in the case of topical antibacterial agents.

Personalised 3D-Printed Mucoadhesive Gastroretentive Hydrophilic Matrices for Managing Overactive Bladder (OAB).

Overactive bladder (OAB) is a symptomatic complex condition characterised by frequent urinary urgency, nocturia, and urinary incontinence with or without urgency. Gabapentin is an effective treatment for OAB, but its narrow absorption window is a concern, as it is preferentially absorbed from the upper small intestine, resulting in poor bioavailability. We aimed to develop an extended release, intragastric floating system to overcome this drawback. For this purpose, plasticiser-free filaments of PEO (polyethylene oxide) and the drug (gabapentin) were developed using hot melt extrusion. The filaments were extruded successfully with 98% drug loading, possessed good mechanical properties, and successfully produced printed tablets using fused deposition modelling (FDM). Tablets were printed with varying shell numbers and infill density to investigate their floating capacity. Among the seven matrix tablet formulations, F2 (2 shells, 0% infill) showed the highest floating time, i.e., more than 10 h. The drug release rates fell as the infill density and shell number increased. However, F2 was the best performing formulation in terms of floating and release and was chosen for in vivo (pharmacokinetic) studies. The pharmacokinetic findings exhibit improved gabapentin absorption compared to the control (oral solution). Overall, it can be concluded that 3D printing technology is an easy-to-use approach which demonstrated its benefits in developing medicines based on a mucoadhesive gastroretentive strategy, improving the absorption of gabapentin with potential for the improved management of OAB.

Topical Antiseptic Formulations for Skin and Soft Tissue Infections.

Skin and soft tissue infections (SSTIs) are usually acute conditions of inflammatory microbial occupation of the skin layers and underlying soft tissues. SSTIs are one of the most frequent types of infection, typically requiring medical intervention and contribute to morbidity and mortality in both primary care and hospitalised patients. Due to the dramatic rise of antibiotic resistance, antiseptic agents can be potential alternatives for the prevention and treatment of SSTIs. Notably, they are commonly recommended in many global practical guidelines for use in per- and post- operative procedures. A range of antiseptics, including chlorhexidine, triclosan, alcohol, and povidone-iodine, are used and are mainly formulated as traditional, simple dosage forms such as solutions and semi-solids. However, in recent years, there have been studies reporting the potential for nanotechnology in the delivery of antiseptics. In this review, we have collated the scientific literature that focuses on topical antiseptic formulations for prevention and treatment of SSTIs, and have divided findings into traditional and advanced formulations. We conclude that although nanotechnological formulations have demonstrated potential advantages for delivering drugs; nevertheless, there is still scope for traditional formulations and further development of optimised topical formulations to address the rise of antimicrobial resistance.

Electrically Tunable Lens (ETL)-Based Variable Focus Imaging System for Parametric Surface Texture Analysis of Materials.

Electrically tunable lenses (ETLs) are those with the ability to alter their optical power in response to an electric signal. This feature allows such systems to not only image the areas of interest but also obtain spatial depth perception (depth of field, DOF). The aim of the present study was to develop an ETL-based imaging system for quantitative surface analysis. Firstly, the system was calibrated to achieve high depth resolution, warranting the accurate measurement of the depth and to account for and correct any influences from external factors on the ETL. This was completed using the Tenengrad operator which effectively identified the plane of best focus as demonstrated by the linear relationship between the control current applied to the ETL and the height at which the optical system focuses. The system was then employed to measure amplitude, spatial, hybrid, and volume surface texture parameters of a model material (pharmaceutical dosage form) which were validated against the parameters obtained using a previously validated surface texture analysis technique, optical profilometry. There were no statistically significant differences between the surface texture parameters measured by the techniques, highlighting the potential application of ETL-based imaging systems as an easily adaptable and low-cost alternative surface texture analysis technique to conventional microscopy techniques.

Drug Delivery Approaches for Managing Overactive Bladder (OAB): A Systematic Review.

Overactive bladder syndrome (OAB) is characterised by urgency symptoms, with or without urgency incontinence, usually with frequency and nocturia and severely affects the quality of life. This systematic review evaluates the various drug delivery strategies used in practice to manage OAB. Advanced drug delivery strategies alongside traditional strategies were comprehensively analysed and comparatively evaluated. The present review was conducted according to the preferred reporting items for systematic reviews and meta-analyses guidelines. A total of 24 studies reporting the development of novel formulations for the treatment of OAB were considered eligible and were further categorised according to the route of drug administration. The review found that various drug delivery routes (transdermal, intravesicular, oral, vaginal and intramuscular) are used for the administration of drugs for managing OAB, however, the outcomes illustrated the marked potential of transdermal drug delivery route. The findings of the current review are expected to be helpful for pharmaceutical scientists to better comprehend the existing literature and challenges and is anticipated to provide a basis for designing and fabricating novel drug delivery systems to manage OAB.

Okra (Hibiscus esculentus) gum based hydrophilic matrices for controlled drug delivery applications: Estimation of percolation threshold.

This study aims to explore the potential of gum extracted from okra fruit (Hibiscus esculentus) in developing hydrophilic matrices for controlled drug release applications, including determination of its percolation threshold. Flurbiprofen (poorly soluble), theophylline (sparingly soluble) and metformin (freely soluble) were employed as model drugs and incorporated using direct compression into matrices containing 40% w/w of three drugs with different physicochemical properties. Atomic force microscopy was used to study the surface texture properties of developed matrices; the surfaces of the flurbiprofen-based matrices were comparatively rough most likely as a consequence of its poor compactability. Swelling studies found that the swelling rate increased as the concentration of okra gum was increased. However, for all matrices, an increase in the gum concentration resulted in decreased drug release. The estimated percolation threshold of the okra gum calculated was found in the region of ~25% v/v plus initial porosity. Knowing the percolation threshold will enable formulators to use the minimal amount of polymer for sustain release matrices thus the controlling costs and maximising the sustainable potential of okra. This study will not only assist researchers in developing effective okra gum-based extended-release matrices but also expected to contribute towards its exploration at an industrial scale.

Personalised 3D Printed Fast-Dissolving Tablets for Managing Hypertensive Crisis: In-Vitro/In-Vivo Studies.

Hypertensive crisis (HC) is an emergency health condition which requires an effective management strategy. Over the years, various researchers have developed captopril based fast-dissolving formulations to manage HC; however, primarily, the question of personalisation remains unaddressed. Moreover, commercially these formulations are available as in fixed-dose combinations or strengths, so the titration of dose according to patient's prerequisite is challenging to achieve. The recent emergence of 3D printing technologies has given pharmaceutical scientists a way forward to develop personalised medicines keeping in view patients individual needs. The current project, therefore, is aimed at addressing the limitations as mentioned above by developing fast-dissolving captopril tablets using 3D printing approach. Captopril unloaded (F1) and loaded (F2-F4) filaments were successfully produced with an acceptable drug loading and mechanical properties. Various captopril formulations (F2-F4) were successfully printed using fused deposition modelling technique. The results revealed that the formulations (F2 and F3) containing superdisintegrant had a faster extent of dissolution and in-vivo findings were endorsing these results. The present study has successfully exhibited the utilisation of additive manufacturing approach to mend the gap of personalisation and manufacturing fast-dissolving captopril 3D printed tablets. The procedure adopted in the present study may be used for the development of fused deposition modelling (FDM) based fast-dissolving 3D printed tablets.

Global Prevalence and Risk Factors of Gastro-oesophageal Reflux Disease (GORD): Systematic Review with Meta-analysis.

Although gastro-oesophageal reflux disease (GORD) is a common medical complaint, there is currently no consensus on the global prevalence of GORD. The aim of this study was to conduct a systematic review and meta-analysis on GORD prevalence and risk factors at a global level. MEDLINE, EMBASE, CINAHL, Scopus, Cochrane library, and Google Scholar were systematically searched, without language restrictions, for studies on the prevalence and risk factors of GORD. Data were pooled using a random effects model (95% confidence interval), and the odds ratio and relative risk for each risk factor were calculated. Out of 34,355 search results, 96 records reporting the results from 102 studies fulfilled the inclusion criteria, representing 37 countries and all regions of the UN geoscheme. The global pooled prevalence of GORD was 13.98% and varied greatly according to region (12.88% in Latin America and the Caribbean to 19.55% in North America) and country (4.16% in China to 22.40% in Turkey). Using the United Nations 2017 Revision of World Population Prospects, the estimated number of individuals suffering from GORD globally is 1.03 billion. Multiple risk factors associated with a significant increase in the risk of GORD were also identified. This systematic review and meta-analysis revealed that although a substantial proportion (13.98%) of the global population suffers from GORD, there are significant variations between regions and countries. Risk factors for GORD were also identified which may allow clinicians to recognise individuals most at risk.

Electrospun Gelatin Nanocontainers for Enhanced Biopharmaceutical Performance of Piroxicam: In Vivo and In Vitro Investigations.

BACKGROUND: Piroxicam exhibits low oral bioavailability, due to its meager solubility in water. The intent of this study was to ameliorate the bioavailability of the drug by employing a solubility-enhancing encapsulation technique. METHODS: Seven samples were formulated with piroxicam and gelatin using both solvent evaporation and electrospraying together. Evaluation of solubility and release rate in water and assessment of bioavailability in rats were carried out in comparison with piroxicam plain drug powder (PPDP). Other in vitro explorations were accomplished using powder X-ray diffraction analysis, differential scanning calorimetry, thermogravimetric analysis, scanning electron microscopy, and Fourier-transform infrared spectroscopy. RESULTS: All piroxicam-loaded gelatinnanocontainers (PLGNs) enhanced solubility and release of the payload in water. In particular, a PLGN formulation consisting of piroxicam and gelatin at a 1:8 (w:w) ratio presented about 600-fold the drug solubility of that shown by PPDP. Moreover, 85.12%±10.96% of the payload was released from this formulation in 10 minutes which was significantly higher than that dissolved from PPDP in 10 minutes (11.81%±5.34%). Drug content, drug loading, and encapsulation efficiency of this formulation were 93.41%±0.56%, 10.45%±0.06%, and 66.74%±6.87%, respectively. The drug loaded in PLGNs existed in the amorphous state, as confirmed by X-ray diffraction and differential scanning-calorimetry analyses, and was more stable when analyzed by thermogravimetric analysis. Moreover, Fourier-transform infrared spectroscopy analysis suggested nonexistence of any piroxicam-gelatin interaction in the formulation. In the scanning electron-microscopy image, PLGNs appeared as round, smooth particles, with particle size of <1,000 nm. Amelioration in bioavailability of piroxicam with the aforementioned PLGN formulation was fourfold that of PPDP. CONCLUSION: The PLGN formulation fabricated with piroxicam and gelatin at 1:8 (w:w) might be a promising system for enhanced biopharmaceutical performance of the drug.

Phytochemical profiling, antioxidant and antiproliferation potential of Euphorbia milii var.: Experimental analysis and in-silico validation.

This study was aimed to investigate the anticancer potential of Euphorbia milii (E. milii) using an exquisite combination of phytopharmacological and advanced computational techniques. The chloroform fraction (Em-C) of E. milii methanol extract showed the highest antioxidant activity (IC50: 6.41 ± 0.99 µg/ml) among all studied fractions. Likewise, Em-C also showed significant cytotoxicity (IC50: 11.2 ± 0.8 µg/ml) when compared with that of standard compound 5-fluorouracil (5-FU) (IC50: 4.22 ± 0.6 µg/ml) against hepatocarcinoma cell line (HepG2). However, in a human cervical cancer cell line (HeLa), Em-C demonstrated a non-significant difference in cytotoxicity (22.1 ± 0.8 µg/ml) when compared with that of 5-FU (IC50: 6.87 ± 0.5 µg/ml). Furthermore, Western blot and qRT-PCR analysis revealed that the suppression of HepG2 cells was the consequence of a tremendous decrease in CDK2 and E2F1 protein expression. The GC-MS analysis of Em-C revealed the unique presence of cyclobarbital (CBT) and benzodioxole derivative (BAN) as major constituents. Furthermore, molecular docking of compounds BAN, CBT, and MBT into the binding site of different molecular targets i.e. cyclin dependent kinase 2 (CDK2), thymidylate synthase (TS), caspase 3, BCL2 and topoisomerase II was carried out. Compounds BAN and CBT have demonstrated remarkable binding affinity towards CDK2 and thymidylate synthase, respectively. Molecular dynamic simulation studies have further confirmed the finding of docking analysis, suggesting that CDK2 and TS can act as an attractive molecular target for BAN and CBT, respectively. It can be concluded that these E. milii phytoconstituents (BAN and CBT) may likely be responsible for anti-invasive activity against HepG2 cells.

In situ 3D nanoscale advanced imaging algorithms with integrated chemical imaging for the characterisation of pharmaceuticals.

The present study aimed to develop and validate an advanced image stitching algorithm integrated with chemical imaging at the nanometre scale. This was applied to track the swelling, erosion, drug release and changes in surface texture of a swelling-controlled release system. The technique involves the delivery and withdrawal of a liquid droplet from the surface of the tablet alongside capturing multiple images of tablet surface using white light profilometry. The recovered liquid was then subject to chemical analysis for the quantification of drug and HPMC. The multiple images acquired during drug release were stitched together using an algorithm developed to generate a full tablet surface. New methods for swelling analysis (regional point, area and multiple regional analysis techniques) were also successfully developed. The results exhibited the exceptional capability of this technique for providing quantitative information regarding swelling, erosion, drug release and surface topography, hence negating the need for separate investigations. Moreover, it can also be anticipated that this technique may have potential use in other fields where surface dissolution, erosion and swelling have significant impact.