Effect of autoclave sterilization on cyclic fatigue and torsional fracture resistance of NiTi rotary instruments.

The purpose of this study is to assess the effect of autoclave sterilization on the cyclic fatigue and torsional fracture resistance of ProTaper Universal (PTU), K3XF, HyFlex EDM (EDM), and TF adaptive (TFA). Sixty instruments from each file type were divided into two categories for cyclic fatigue group (CGr) and torsional fracture group (TGr). CGr and TGr were divided into three subgroups, respectively, consisting of ten instruments from each file type. Cyclic fatigue fracture test was performed using artificial canal made of stainless steel, and the mean number of cycles to failure (NCF) were determined. CGr1, the files were tested to establish baseline for NCF; CGr2, the files were tested cyclic fatigue after 10 cycles of autoclave; CGr3, instruments were autoclaved after being cycled to 25, 50, and 75% of corresponding NCF determined in CGr1, followed by cyclic fatigue test. The torsional fracture test was performed without autoclave (TGr1), after 3-cycle autoclave (TGr2), and 7-cycle autoclave (TGr3), respectively, which evaluated maximum torque and angular deflection. NCF, maximum torque and angular deflection were compared using one-way ANOVA with Bonferroni test. Two-way ANOVA was performed to determine the interaction between 'autoclave treatment' and 'type of NiTi file'. EDM showed highest NCF within the same autoclave treatment. TFA presented the lowest maximum torque and the highest angular deflection, and PTU presented the lowest angular deflection. Within the same NiTi file systems, most of NCF, maximum torque and angular deflection of tested files were not significantly influenced by autoclave condition.

Role of Treg and TH17 cells of the gastric mucosa in children with Helicobacter pylori gastritis.

OBJECTIVE: The aim of the present study was to examine the expression of FOXP3, interleukin (IL)-10, transforming growth factor (TGF)-ß1, IL-17A, and T helper 17 (TH17) cells/FOXP3+ regulatory T (Treg) cells balance in the gastric mucosa of children with Helicobacter pylori infection, in relation to the gastric histopathology. METHODS: Antral mucosal biopsies were obtained from 20 children with H pylori(+) gastritis and 20 age- and sex-matched normal controls. Histopathology was assessed by the updated Sydney classification. Gene expression of FOXP3, IL-10, and TGF-ß1 was analyzed by quantitative real-time polymerase chain reaction. Immunohistochemical staining for FOXP3+ Treg and TH17 cells was performed. RESULTS: The gene expression levels of FOXP3, TGF-ß1, and IL-10 messenger RNA (mRNA) and the number of FOXP3+ Treg were significantly higher in the H pylori(+) gastritis group than in the control group (P < 0.01). FOXP3 mRNA levels were correlated positively with TGF-ß1 and IL-10 mRNA levels in the H pylori(+) gastritis group (P < 0.05). Furthermore, FOXP3 mRNA levels were correlated positively with the bacterial density, infiltration of polymorphonuclear cells, and mononuclear cells in the H pylori(+) gastritis group (P < 0.05). The number of TH17 cells was significantly higher in the H pylori(+) gastritis group than in the control group (P < 0.05). In addition, the number of TH17 cells was correlated negatively with the bacterial density and positively with the inflammatory scores of polymorphonuclear cells and mononuclear cells in the H pylori(+) gastritis group (P < 0.05). A negative correlation between the TH17 cells/FOXP3+ Treg ratio and the bacterial density was demonstrated in the H pylori(+) gastritis group (P < 0.05). CONCLUSIONS: This study suggested that a TH17/Treg balance toward a Treg-biased response favors the persistence of bacteria, causing chronic active gastritis.

Revision of the Laonice bahusiensis complex (Annelida: Spionidae) with a description of three new species.

The morphological reexamination of specimens previously identified as Laonice bahusiensis Sderstrm, 1920 from North European and Mediterranean collections, supported by the molecular analysis of freshly collected material, enabled the recognition of four different species in the region: the genuine L. bahusiensis, L. irinae n. sp. from North European waters, and L. grimaldii n. sp. and L. mediterranea n. sp. from the Mediterranean Sea. The morphology of these species is described and illustrated, and their distributions are clarified based on old and new materials. A key for their identification is also provided. The Bayesian analysis of the COI sequences (483 bp) showed that these four species form a clade, namely the L. bahusiensis species complex, morphologically characterized by the continuous dorsal crests on postbranchiate chaetigers in the adults. The genetic p-distances between the species of the complex ranged from 13.27% to 17.99%, while the intraspecific variability ranged from 0.6% to 1.57%. Together with the sister species Laonice cirrata (Sars, 1851), the L. bahusiensis complex formed the Laonice (Laonice) clade, which is morphologically characterized by the prostomium fused with the anterior peristomial margin. However, the monophyly of the L. bahusiensis complex, as well as that of the clade Laonice (Laonice), needs to be further supported through the analysis of a greater set of genes from a larger number of species.

Virtual Simulation of Autotransplantation Using 3-dimensional Printing Prototyping Model and Computer-assisted Design Program.

This case report describes an innovative virtual simulation method using a computer-aided rapid prototyping (CARP) model and a computer-aided design (CAD) program for autotransplantation of an immature third molar.A compromised left mandibular second molar (#18) was extracted and replaced by autotransplantation using an immature left mandibular third molar (#17). In order to minimize the surgical time and injury to the donor tooth, a virtual 3-dimensional (3D) rehearsal surgery was planned. Cone-beam computed tomographic images were taken to fabricate the 3D printing CARP model of the donor tooth and tentative extraction socket. Subsequently, both CARP models were scanned with an intraoral scanner (CEREC Omnicam; Dentsply Sirona, Bensheim, Germany) followed by superimposition and virtual simulation of osteotomy preparation of the recipient alveolus using the CAD analysis program. During the surgery, the extraction socket was precisely prepared according to the predetermined location and dimensions via virtual simulation rehearsal surgery using CAD analysis. The donor tooth was atraumatically transplanted into the prepared socket. The follow-up examination revealed that the root developed with a normal periodontal ligament and lamina dura.Virtual simulation using a 3D printing CARP model and a CAD program could be clinically useful in autotransplantation of an immature third molar by ensuring an atraumatic and predictable surgery.

Effects of cavity configuration on composite restoration.

This study evaluated the effects of various cavity configurations on the bond strength, microleakage, flexural strength and elastic modulus of a hybrid (Clearfil AP-X) and a microhybrid (Esthet-X) composite restorative. After the specimens were made with C-factors of less than 1, 2.4 and 3.4, flexural strength and elastic modulus were evaluated in three-point bending using a mechanical testing machine. Fragments of the fractured specimens were selected randomly and the fracture surfaces were examined in SEM. To evaluate the microtensile bond strength and microleakage of composite restorations in bovine cavities, C-factors (ratio of bonded to non-bonded cavity surface) were controlled as 1.0, 2.3, 3.0 and 3.7. All specimens were stored in distilled water at 37 degrees C for 24 hours and tested in a universal testing machine (EZ Test, Shimadzu, Japan). For the microleakage test, teeth with restorations were stained with silver nitrate and examined by two examiners under a stereomicroscope at 40x magnification. The hybrid composite showed higher mechanical properties than the microhybrid composite. The flexural strength and elastic modulus of both composites decreased when polymerized under greater constraint, that is, with increasing C-factor. Mean microtensile bond strength to dentin was also decreased with increasing C-factor for both types of composites. Microleakage scores for the hybrid composite restorations were generally higher than the microhybrid composite.

Long-term follow-ups of revascularized immature necrotic teeth: three case reports.

Revascularization of immature necrotic teeth is a reliable treatment alternative to conventional apexogenesis or apexification. In case 1, a 12-year-old boy had his necrotic, immature mandibular left second premolar treated with a revascularization technique. At a24-month follow-up, periapical radiolucency had disappeared and thickening of the root wall was observed. In cases 2 and 3, a10-year-old boy had his necrotic, immature, bilateral mandibular second premolars treated with the same modality. At 48-month(in case 2) and 42-month (in case 3) follow-ups, loss of periapical radiolucencies and increases in the root wall thickness were also observed.