RESUMO
BACKGROUND AND OBJECTIVES: Treg and TH17 cells influence the inflammatory process in periodontal diseases and could also play in a similar pattern, an essential role in immune-inflammatory mechanisms involved in the destruction of the peri-implant tissues, peri-implantitis. Therefore, this study evaluated the levels of RORγT and FOXP3 gene expression in subjects with peri-implantitis and healthy peri-implant tissues. METHODS: A total of 35 subjects with implant-supported restorations in both diseased and healthy clinical conditions (n = 15 healthy; n = 20 peri-implantitis) were included in this study. Peri-implantitis was defined as probing depth > 5 mm, bleeding on probing and/or suppuration, and peri-implant bone loss >4 mm. Peri-implant tissue biopsies were collected for analysis of the mRNA, RORγT, and FOXP3 expression levels. The samples were submitted to total RNA extraction, treatment with DNAse, and cDNA synthesis. Subsequently, real-time PCR reaction was performed to evaluate the levels of RORγT and FOXP3 gene expression to the reference gene. These were analyzed by the non-parametric Mann-Whitney method with a level of significance of 5%. RESULTS: Higher gene expression levels of the transcription factors RORγT and FOXP3 were detected in the tissues affected by peri-implantitis when compared with healthy tissues (p < 0.05). CONCLUSIONS: The present study demonstrated the possible existence of a hybrid TH17-Treg profile, based on the gene expression of transcription factors inducing differentiation of these cells. Further studies must be designed to gain a better understanding of the immunological mechanisms involved in the pathogenesis of peri-implantitis. CLINICAL RELEVANCE: The levels of RORγT and FOXP3 transcription factors that were linked to cells with the FOXP3+RORγT+ phenotype could be used as a predictor of peri-implantitis progression.
Assuntos
Implantes Dentários , Peri-Implantite , Humanos , Imunidade , Linfócitos T Reguladores , Células Th17RESUMO
BACKGROUND: Technology advancement has rising in the past decade and brought several innovations and improvements. In dentistry, this advances provided more comfortable and quick procedures to both the patient and the dental surgeon, generating less predictability in the final result. Several techniques has been developed for the preparation of surgical guides aiming at the optimization of surgical procedures. The present study aimed to evaluate the reproducibility and precision of two types of surgical guides obtained using 3D printing and milling methods. METHODS: A virtual model was developed that allowed the virtual design of milled (n = 10) or 3D printed (n = 10) surgical guides. The surgical guides were digitally oriented and overlapped on the virtual model. For the milling guides, the Sirona Dentsply system was used, while the 3D printing guides were produced using EnvisionTEC's Perfactory P4K Life Series 3D printer and E-Guide Tint, a biocompatible Class I certified material. The precision and trueness of each group during overlap were assessed. The data were analyzed with GraphPad software using the Kolmogorov-Smirnov test for normality and Student's t test for the variables. RESULTS: The Kolmogorov-Smirnov test showed a normal distribution of the data. Comparisons between groups showed no statistically significant differences for trueness (p = 0.529) or precision (p = 0.3021). However, a significant difference was observed in the standard deviation of mismatches regarding accuracy from the master model (p < 0.0001). CONCLUSIONS: Within the limits of this study, surgical guides fabricated by milling or prototyped processes achieved similar results.
Assuntos
Desenho Assistido por Computador , Impressão Tridimensional , Humanos , Reprodutibilidade dos TestesRESUMO
BACKGROUND AND OBJECTIVE: Little is known about the correspondence of cytokines detected among the different biological matrices used in periodontal research and whether locally-detected cytokine mRNA can also be identified at the translated protein level. The aims of this study were to compare: (a) the detection of classic cytokines at protein level in corresponding samples of serum, gingival tissue and gingival crevicular fluid (GCF) in subjects with periodontitis and (b) the detection of cytokines at protein level in GCF and tissue with their detection at mRNA level in tissue. MATERIAL AND METHODS: Protein concentrations of IL-1ß, IL-6 and TNF-α were measured in corresponding samples of GCF, gingival tissue and serum from 125 subjects with chronic periodontitis by multiplex immunoassay. The mRNA levels of these cytokines were evaluated in the same gingival tissue by qPCR. RESULTS: The mean protein concentrations of IL-1ß and TNF-α were higher in tissue and GCF than in serum (P < 0.05). The mean protein concentration of IL-6 was higher in tissue, followed by serum and GCF, respectively (P < 0.05). Using serum as the gold standard, detection of IL-1ß in GCF and IL-6 in tissue had the highest sensitivity (100%), while detection of IL-6 in the GCF had the lowest sensitivity (77.9%). Using tissue as the gold standard, the detection sensitivities of IL-1ß, IL-6 and TNF-α were 93.6%, 78.4% and 94.2%, respectively, in GCF. Using mRNA as the gold standard, the detection of IL-1ß and IL-6 at the protein level in tissue (100.0%) had the highest sensitivity, while the detection of IL-6 in GCF (77.9%) had the lowest sensitivity. CONCLUSION: Tissue and GCF exhibited overall higher protein concentrations of cytokines than serum. GCF presented good reliability for identifying the target cytokines at protein level, when compared with detecting tissue cytokines at protein level. GCF and tissue presented high sensitivities for detecting cytokines at the protein level, when compared with detecting tissue cytokines at the mRNA level. The sensitivity for the identification of cytokines in the GCF depended on the target cytokine, where IL-6 was the least likely cytokine to be detected in this matrix.
Assuntos
Periodontite Crônica/genética , Periodontite Crônica/metabolismo , Gengiva/metabolismo , Líquido do Sulco Gengival/metabolismo , Mediadores da Inflamação/metabolismo , Interleucina-1beta/genética , Interleucina-1beta/metabolismo , Interleucina-6/genética , Interleucina-6/metabolismo , RNA Mensageiro/metabolismo , Fator de Necrose Tumoral alfa/genética , Fator de Necrose Tumoral alfa/metabolismo , Adulto , Idoso , Idoso de 80 Anos ou mais , Periodontite Crônica/sangue , Feminino , Humanos , Mediadores da Inflamação/sangue , Interleucina-1beta/sangue , Interleucina-6/sangue , Masculino , Pessoa de Meia-Idade , RNA Mensageiro/sangue , Fator de Necrose Tumoral alfa/sangueRESUMO
OBJECTIVES: The aim of this study was to investigate bone turnover alterations after alendronate (ALD) withdrawal and its influence on dental implants osseointegration. MATERIALS AND METHODS: Seventy female Wistar rats were randomly divided in 2 groups that received on day 0 either placebo (control group-CTL; n = 10) or 1 mg/kg sodium alendronate (ALD; n = 60) once a week for 4 months. At day 120, ALD treatment was suspended for 50 animals. Then, a titanium implant was placed in the left tibia of each rat that were randomly allocated in five subgroups of ten animals each, according to the period of evaluation: day 0 (INT-0), day 7 (INT-7), day 14 (INT-14), day 28 (INT-28), and day 45 (INT-45) after ALD withdrawal. CTL group and a group that received ALD until the end of the experimental period (non-interrupted group-non-INT; n = 10) underwent implant placement on day 120. Animals were euthanized 28 days after implant surgery. Bone mineral density (BMD) of femur and lumbar vertebrae were evaluated by DXA, biochemical markers of bone turnover were analyzed by ELISA, and bone histomorphometry was performed to measure bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO). RESULTS: All groups receiving ALD showed higher BMD values when compared to CTL group, which were maintained after its withdrawal. Decreased concentrations in all bone turnover markers were observed in the non-INT group, and in the groups in which ALD was discontinued compared to the CTL group. The non-INT group showed lower %BIC and notably changes in bone quality, which was persistent after drug withdrawal. CONCLUSION: Collectively, the findings of this study demonstrated that ALD therapy decreased bone turnover and impaired bone quality and quantity around dental implants, and that its discontinuation did not reverse these findings. CLINICAL RELEVANCE: The severe suppression of bone turnover caused by the prolonged use of ALD may alter the capacity of bone tissue to integrate with the implant threads impairing the osseointegration process.
Assuntos
Alendronato/administração & dosagem , Remodelação Óssea , Implantes Dentários , Osseointegração , Animais , Densidade Óssea , Feminino , Distribuição Aleatória , Ratos , Ratos Wistar , Tíbia , TitânioRESUMO
OBJECTIVES: The mRNA expression profiles of IL-23/Th17 and the Treg-associated cytokine TGF-ß in peri-implantitis are currently under research. This study characterized the IL-17, IL-23, and TGF-ß gene expression levels in healthy and diseased peri-implant tissues and correlated these data with radiographic bone loss. MATERIAL AND METHODS: Peri-implant soft tissues from 40 subjects (20 healthy controls with mean age of 59.4 ± 6.3, and 20 with peri-implantitis with mean age of 56.6 ± 5.5) were enrolled in this study, and real-time PCR (RT-PCR) was used to define the profile of IL-17, IL-23, and TGF-ß gene expression. RESULTS: Higher levels of TGF-ß mRNA were observed in biopsies taken from healthy controls, and the IL-23 mRNA levels were significantly increased in the peri-implantitis group (P < 0.0001). No differences in IL-17 mRNA levels were observed between the two groups (P > 0.05). CONCLUSIONS: Data presented in this report demonstrated a predominant Th17 response in peri-implantitis subjects based on the higher levels of IL-23 and lower levels of TGF-ß detected.
Assuntos
Expressão Gênica , Interleucina-17/genética , Interleucina-23/genética , Peri-Implantite/genética , Fator de Crescimento Transformador beta/genética , Biópsia , Estudos de Casos e Controles , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , RNA Mensageiro/genética , Reação em Cadeia da Polimerase em Tempo RealAssuntos
Ortodontia , Pós-Menopausa , Densidade Óssea , Difosfonatos/uso terapêutico , Feminino , HumanosRESUMO
OBJECTIVES: The present study measured implant stability quotient (ISQ) values at three different time points after surgical procedures to compare whether the stability values differed between implants placed in fresh extraction sockets versus healed alveolar sites. MATERIALS AND METHODS: To measure implant stability, resonance frequency analysis (RFA) was performed in 77 patients (53 women, 24 men) with a total of 120 dental implants. These implants were divided into two groups: Group 1 included 60 implants in healed alveolar sites (22 in the maxilla, 38 in the mandible), and Group 2 included 60 implants in fresh sockets (41 in the maxilla, 19 in the mandible). Implant stability was measured immediately at implant placement (baseline), 90, and 150 days later. Statistical analysis was made using a multivariate regression linear model at implant level (α = 0.05). RESULTS: Overall, the means and standard deviations of the ISQ values were 62.7 ± 7.14 (95% confidence interval [CI], 39-88) at baseline, 70.0 ± 6.22 (95% CI, 46-88) at 90 days, and 73.4 ± 5.84 (95% CI, 58-88) at 150 days. In Group 1, the ISQs ranged between 64.3 ± 6.20 and 75.0 ± 5.69, while in Group 2, presented lower values that ranged between 61.2 ± 8.09 and 71.9 ± 5.99 (P = 0.002). Anatomic location and times periods were the only identified variables with an influence on ISQ values at implant level (P < 0.0001). CONCLUSIONS: The stabilities of the implants placed in the fresh sockets and in healed sites exhibited similar evolutions in ISQ values and thus osseointegration; however, the implants in the healed alveolar sites exhibited superior values at all time points.
Assuntos
Processo Alveolar/cirurgia , Implantes Dentários , Osseointegração , Alvéolo Dental/cirurgia , Feminino , Humanos , Masculino , Mandíbula/cirurgia , Maxila/cirurgiaRESUMO
STATEMENT OF PROBLEM: Limited mandibular movements are one of the most important signs of temporomandibular disorders (TMDs) and may cause functional difficulties. PURPOSE: The purpose of this double-blind, randomized clinical trial was to evaluate the effect of treatment with only educational or education associated with self-care therapies on the pattern of mandibular movements of women with chronic painful TMDs. MATERIAL AND METHODS: Forty-two women were selected and randomly divided into 3 groups, control group (CG, n=13), education group (EG, n=16), and education and self-care group (ESG, n=13), according to the sequence of treatment they received. A kinesiograph device recorded mandibular movements during maximum mouth opening and mastication at baseline (T0) and at 30-day (T1) and 60-day (T2) follow-up. Kinesiographic data were statistically analyzed using 1-way ANOVA, followed by the Bonferroni test for multiple comparisons of means (α=.05). RESULTS: The ESG group demonstrated an improvement in the maximum vertical opening (MVO= 5.1 ±3.4 mm; P=.012) and anteroposterior mandibular movement (MAM) during maximum opening (7.4 ±9.5; P=.019), significantly higher than that of the EG (MVO=1.8 ±3.5 mm; MAM=0.8 ±5.0 mm) and the CG (MVO=0.9 ±3.8 mm; MAM=0.8 ±4.4 mm) after 30 days of follow-up. Moreover, at T1, vertical mandibular movement during mastication was significantly higher in the ESG group (17.4 ±1.7 mm) than in the EG group (15.0 ±2.8, P=.027). No significant differences were found between the women who received treatment with educational and self-care therapies for 60 days and the women who received this treatment for 30 days. CONCLUSIONS: In the short-term, education and self-care treatment positively influenced the mandibular movement pattern of women with chronic painful TMDs.
Assuntos
Educação de Pacientes como Assunto , Autocuidado , Transtornos da Articulação Temporomandibular/terapia , Adulto , Método Duplo-Cego , Feminino , Humanos , Mandíbula , Mastigação , Movimento , Amplitude de Movimento ArticularRESUMO
STATEMENT OF PROBLEM: The difficulty of removing denture adhesive is a common problem reported by users of these products. PURPOSE: The purpose of this clinical study was to investigate the effectiveness of different cleaning protocols for removing a denture adhesive (DA) and the influence on the oral microbiota. MATERIAL AND METHODS: Twenty participants wearing well-fitting complete dentures were instructed to use a denture adhesive 3 times a day during a 4-week trial, divided into 4 stages: (A) control-3 daily denture brushings using water at ambient temperature, (B)-3 daily denture brushings using water at ambient temperature plus coconut soap, (C)-3 daily denture brushings using water at ambient temperature plus dentifrice; (D)-3 daily denture brushings using water at ambient temperature combined with immersion in sodium perborate solution for 5 minutes before nocturnal sleep. After each 1-week stage, saliva specimens were collected. A dye was used to display and quantify the remaining DA on the internal surface of the maxillary dentures as a percentage. For microbiological analysis, the saliva was diluted and plated onto Petri dishes containing a nonselective culture medium and Candida spp culture media. After the incubation period, Candida species were identified and the number of colony forming units (CFU/mL) was calculated. RESULTS: A significant difference was found among the 4 cleaning methods for the quantification of remaining DA (Friedman, P=.036). Brushing the dentures with coconut soap, dentifrice, or water combined with immersion in sodium perborate solution was more effective in removing DA than brushing with only water. The cleaning methods did not influence the quantification of microorganisms in general or Candida albicans and other Candida species in particular. CONCLUSIONS: Brushing the dentures with coconut soap, dentifrice, or water combined with immersion in sodium perborate solution was more effective for removing cream-type denture adhesive than brushing with only water.
Assuntos
Adesivos/química , Biofilmes/crescimento & desenvolvimento , Higienizadores de Dentadura , Boca/microbiologia , Carga Bacteriana , Contagem de Colônia Microbiana , Estudos Cross-Over , Cimentos Dentários , Humanos , Microbiota , Sabões , Propriedades de Superfície , Escovação DentáriaRESUMO
PURPOSE: To evaluate the bond strength between two types of acrylic resin teeth and a microwave denture base resin after immersion in disinfectant solutions for 180 days. MATERIALS AND METHODS: Eighty specimens made of acrylic resin teeth (Biotone and Biotone IPN) attached to a microwave polymerized denture base resin (Nature-Cryl MC) were divided into eight groups (n = 10) according to the treatment (distilled water-control, 2% chlorhexidine digluconate, 1% sodium hypochlorite and sodium perborate solution-Corega Tabs). The shear strength tests (MPa) were carried out using a universal testing machine with a 0.5 mm/min speed. Data analysis was performed using ANOVA and multiple comparison Student-Newman-Keuls post hoc test (α = 0.05). RESULTS: Biotone IPN showed similar results among the groups (distilled water, 8.25 ± 1.81 MPa; chlorhexidine, 7.81 ± 3.34 MPa; hypochlorite, 7.75 ± 3.72 MPa; and Corega Tabs, 7.58 ± 2.27 MPa, whereas Biotone showed significantly lower shear bond strength values for the groups immersed in Corega Tabs (5.25 ± 3.27 MPa) and chlorhexidine (6.08 ± 2.35 MPa). CONCLUSIONS: Soaking the dentures in 1% sodium hypochlorite could be recommended as a disinfectant solution for dentures fabricated with conventional acrylic resin denture teeth and microwave denture base resin. For dentures fabricated with IPN teeth and microwave denture base resin, all the soaking solutions evaluated in this study could be suggested to denture wearers.
Assuntos
Colagem Dentária , Bases de Dentadura , Micro-Ondas , Dente Artificial , Resinas Acrílicas , Desinfetantes , Humanos , Teste de Materiais , Propriedades de SuperfícieRESUMO
PURPOSE: To assess the effect of brushing with different solutions on the abrasion resistance of two types of acrylic resin teeth. MATERIALS AND METHODS: Maxillary premolars from two types of acrylic teeth (Biotone and Biotone IPN) were divided into six groups (n = 12), according to the solution used during brushing: distilled water (control), coconut soap, or dentifrice. A mechanical brushing machine was used to simulate approximately 1 year of brushing (11,000 strokes). The weight loss (WL) of teeth was obtained from the difference between the initial (IW) and final weight (FW) of each specimen, and the mean of percentage of weight loss (PWL) was calculated for each group. Data were analyzed using the Kruskal-Wallis test, followed by Bonferroni's post-test comparison (α = 0.05). RESULTS: A statistically significant difference was found for the factor solution (p < 0.001). Brushing using dentifrice caused the highest values of weight loss (-0.50%), in comparison with the groups brushed with coconut soap (0.00%) or distilled water (0.00%). CONCLUSIONS: For both types of artificial teeth, brushing with dentifrice produced higher abrasion than brushing with coconut soap or water.
Assuntos
Dente Artificial , Escovação Dentária , Cremes Dentais , Dentifrícios , Humanos , Abrasão DentáriaRESUMO
OBJECTIVES: To observe and to compare histologically and histomorphometrically, the combined effect of drilling sequence and implant diameter in vivo. MATERIAL AND METHODS: A total of 72 alumina-blasted and acid-etched Ti-6Al-4V implants with three different diameters (3.75, 4.2, and 5 mm, n = 24 for each group) were placed in the right and left tibiae of 12 beagle dogs. Within the same diameter group, half of the implants were inserted after a simplified drilling procedure (pilot drill + final diameter drill) on one tibia and the other half were placed using the conventional drilling procedure on the other tibia. After 1 week, half of the animals (n = 6) were sacrificed, and the other half was sacrificed after 5 weeks (n = 6). The retrieved bone-implant samples were subjected to non-decalcified histologic sectioning, and the bone-to-implant contact (BIC) and the bone area fraction occupancy (BAFO) were analyzed. Primary statistical analysis used a mixed model analysis of variance with significance level set at P < 0.05. RESULTS: Histologic observation showed that at 1 week, immature woven bone formed in vicinity of the implant, whereas at 5 weeks, the woven bone was replaced by lamellar bone, which formed in proximity with the implant. Histomorphometrically, the simplified technique was associated with significantly greater BIC and BAFO after 1 week. Differences between techniques were not longer apparent after 5 weeks, but BAFO was inversely and significantly associated with implant diameter at that time. CONCLUSIONS: The simplified technique did not impair either early or late bone formation for any tested implant diameter; however, wider diameters were associated with less bone formation at longer healing times for both techniques.
Assuntos
Implantação Dentária Endóssea/métodos , Implantes Dentários , Planejamento de Prótese Dentária , Osseointegração/fisiologia , Osteotomia/métodos , Condicionamento Ácido do Dente/métodos , Ligas , Óxido de Alumínio/química , Animais , Interface Osso-Implante/anatomia & histologia , Ligas Dentárias/química , Corrosão Dentária/métodos , Cães , Modelos Animais , Osteogênese/fisiologia , Propriedades de Superfície , Tíbia/cirurgia , Fatores de Tempo , Titânio/químicaRESUMO
PURPOSE: The objective of this study was to evaluate the influence of 4 different amoxicillin administration protocols on osseointegration of dental implants. MATERIALS AND METHODS: Thirty-five Wistar rats received an implant in the right tibia and were divided into 5 groups (n = 7): the control group (G1), a group that received a single dose of amoxicillin suspension (40 mg/kg) hour before surgery (G2), a group that received amoxicillin suspension 1 hour before surgery and a 10-mg/kg dose every 12 hours for 3 days (G3), a group that received amoxicillin suspension 1 hour before surgery and a 10-mg/kg dose every 12 hours for 5 days (G4), and a group that received amoxicillin suspension 1 hour before surgery and a 10-mg/kg dose every 12 hours for 7 days (G5). The animals were sacrificed by anesthesia overdose 28 days after implant placement. The samples were retrieved for bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) analyses. RESULTS: BIC analysis indicated 3 different statistical groups: G1 plus G2, G3, and G4 plus G5. There was no statistical difference between G1 and G2 or between G4 and G5. G3 presented lower values, with statistical difference for G1 plus G2 and G4 plus G5. Also, a statistical difference was found between G1 plus G2 and G4 plus G5. For BAFO evaluation, no statistical difference was found for the experimental groups. CONCLUSION: The results of this study suggest that prolonged use of amoxicillin might have a negative effect on bone formation around implants.
Assuntos
Amoxicilina/efeitos adversos , Antibacterianos/efeitos adversos , Osseointegração/efeitos dos fármacos , Amoxicilina/administração & dosagem , Animais , Antibacterianos/administração & dosagem , Implantes Dentários , Relação Dose-Resposta a Droga , Masculino , Distribuição Aleatória , Ratos , Ratos Wistar , TíbiaRESUMO
The growing popularity of soft tissue filler injections has brought attention to the associated risks, particularly vascular complications, and their treatments. This case report focuses on a 34-year-old female who developed nasal skin necrosis following hyaluronic acid (HA) filler injection for nasolabial fold (NLF) enhancement. Despite the careful procedure, complications emerged rapidly, emphasizing the critical importance of prompt diagnosis and intervention. A total of 10,000 turbidity reducing units (TRU) of hyaluronidase (HSE) were administered in a high-dose pulsed manner, alongside hyperbaric oxygen therapy. The patient experienced a gradual but significant improvement over 60 days. This case underscores the need for constant vigilance in aesthetic medicine and the potential consequences of even minute HA amounts, exceeding zero, in causing severe vascular events.
RESUMO
This study evaluated 3 implant surfaces in a dog model: (1) resorbable-blasting media + acid-etched (RBMa), alumina-blasting + acid-etching (AB/AE), and AB/AE + RBMa (hybrid). All of the surfaces were minimally rough, and Ca and P were present for the RBMa and hybrid surfaces. Following 2 weeks in vivo, no significant differences were observed for torque, bone-to-implant contact, and bone-area fraction occupied measurements. Newly formed woven bone was observed in proximity with all surfaces.
Assuntos
Abrasão Dental por Ar/métodos , Implantes Dentários , Osseointegração , Implantes Absorvíveis , Condicionamento Ácido do Dente , Óxido de Alumínio , Animais , Implantação Dentária Endóssea , Cães , Durapatita , Masculino , Propriedades de Superfície , Tíbia/cirurgia , TorqueRESUMO
PURPOSE: The objectives of this study were to investigate the flexural strength (FS) and chemical interaction between 2-tert-butylaminoethyl methacrylate (TBAEMA) and a denture base acrylic resin. MATERIALS AND METHODS: Specimens were divided into five groups according to the concentration of TBAEMA incorporated in acrylic resin Onda-Cryl (0%, 1%, 2%, 3%, 4%) and were submitted to Fourier transform infrared spectroscopy (FTIR), electron spectroscopy for chemical analysis (XPS-ESCA), and differential scanning calorimetry (DSC) analyses. FS of the specimens was tested, and results were analyzed by ANOVA/Tukey's test (α < 0.05). RESULTS: Different nitrogen ratios were observed on specimens' surfaces: 0.36%, 0.54%, 0.35%, and 0.20% for groups 1%, 2%, 3%, and 4%, respectively. FTIR indicated copolymerization of acrylic resin and TBAEMA, and DSC results demonstrated a decrease in glass transition temperature (Tg ). Significant differences were found for FS (p < 0.05). The mean values were 91.1 ± 5.5,(A) 77.0 ± 13.1,(B) 67.2 ± 12.5,(B) 64.4 ± 13.0,(B) and 67.2 ± 5.9(B) MPa for groups 0%, 1%, 2%, 3% and 4%, respectively (same superscript letters indicate no significant difference). CONCLUSIONS: The incorporation of TBAEMA in acrylic resin resulted in copolymerization and the presence of amine groups on specimens' surfaces, and in decreases of Tg and FS.
Assuntos
Resinas Acrílicas/química , Materiais Dentários/química , Bases de Dentadura , Metacrilatos/química , Varredura Diferencial de Calorimetria , Fenômenos Químicos , Vidro/química , Teste de Materiais , Microscopia Eletrônica de Transmissão por Filtração de Energia , Nitrogênio/análise , Transição de Fase , Maleabilidade , Polimerização , Polimetil Metacrilato/química , Espectroscopia de Infravermelho com Transformada de Fourier , Estresse Mecânico , Temperatura de TransiçãoRESUMO
This case-control study evaluated the gene expression levels of interleukin (IL)-4, macrophage inflammatory protein type 1 alpha (MIP-1α), and metalloproteinase (MMP)-9, factors involved in the formation of giant cells in healthy peri-implant tissue and peri-implantitis. Thirty-five subjects (15 healthy and 20 with peri-implantitis), who met the inclusion and exclusion criteria, were included in this study. The peri-implant tissue biopsies were subjected to total RNA extraction, DNAse treatment, and cDNA synthesis. Subsequently, the reaction of real-time PCR was performed to evaluate the gene expression levels of IL-4, MIP-1α, and MMP-9 concerning the reference gene. IL-4 gene expression showed higher (18-fold) values in the Peri-Implantitis Group of Patients when compared with the Healthy (Control) Group (p<0.0001). Although MIP- 1α and MMP-9 gene expression levels were higher in diseased implants, they showed no significant differences (p=0.06 and p=0.2337), respectively. Within the limitations of this study, the results showed that in tissues affected by peri-implantitis, only levels of Il-4 were increased when compared with tissues in the control group.
Assuntos
Implantes Dentários , Peri-Implantite , Humanos , Peri-Implantite/genética , Peri-Implantite/metabolismo , Peri-Implantite/patologia , Quimiocina CCL3/genética , Interleucina-4/genética , Estudos de Casos e Controles , Metaloproteinase 9 da Matriz/genética , Expressão GênicaRESUMO
OBJECTIVES: To evaluate the effect of insertion torque on micromotion to a lateral force in three different implant designs. MATERIAL AND METHODS: Thirty-six implants with identical thread design, but different cutting groove design were divided in three groups: (1) non-fluted (no cutting groove, solid screw-form); (2) fluted (90° cut at the apex, tap design); and (3) Blossom(™) (Patent pending) (non-fluted with engineered trimmed thread design). The implants were screwed into polyurethane foam blocks and the insertion torque was recorded after each turn of 90° by a digital torque gauge. Controlled lateral loads of 10 N followed by increments of 5 up to 100 N were sequentially applied by a digital force gauge on a titanium abutment. Statistical comparison was performed with two-way mixed model ANOVA that evaluated implant design group, linear effects of turns and displacement loads, and their interaction. RESULTS: While insertion torque increased as a function of number of turns for each design, the slope and final values increased (P<0.001) progressively from the Blossom to the fluted to the non-fluted design (M ± standard deviation [SD]=64.1 ± 26.8, 139.4 ± 17.2, and 205.23 ± 24.3 Ncm, respectively). While a linear relationship between horizontal displacement and lateral force was observed for each design, the slope and maximal displacement increased (P<0.001) progressively from the Blossom to the fluted to the non-fluted design (M ± SD=530 ± 57.7, 585.9 ± 82.4, and 782.33 ± 269.4 µm, respectively). There was negligible to moderate levels of association between insertion torque and lateral displacement in the Blossom, fluted and non-fluted design groups, respectively. CONCLUSION: Insertion torque was reduced in implant macrodesigns that incorporated cutting edges, and lesser insertion torque was generally associated with decreased micromovement. However, insertion torque and micromotion were unrelated within implant designs, particularly for those designs showing the least insertion torque.
Assuntos
Implantação Dentária Endóssea/métodos , Implantes Dentários , Planejamento de Prótese Dentária , Análise de Variância , Retenção em Prótese Dentária , Falha de Restauração Dentária , Análise do Estresse Dentário , Osseointegração , Poliuretanos , Estresse Mecânico , Propriedades de Superfície , TorqueRESUMO
OBJECTIVES: To compare the biomechanical fixation and histomorphometric parameters between two implant surfaces: non-washed resorbable blasting media (NWRBM) and alumina-blasted/acid-etched (AB/AE), in a dog model. MATERIAL AND METHODS: The surface topography was assessed by scanning electron microscopy, optical interferometry and chemistry by X-ray photoelectron spectroscopy (XPS). Six beagle dogs of â¼1.5 years of age were utilized and each animal received one implant of each surface per limb (distal radii sites). After a healing period of 3 weeks, the animals were euthanized and half of the implants were biomechanically tested (removal torque) and the other half was referred to nondecalcified histology processing. Histomorphometric analysis considered bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO). Following data normality check with the Kolmogorov-Smirnov test, statistical analysis was performed by paired t-tests at 95% level of significance. RESULTS: Surface roughness parameters S(a) (average surface roughness) and S(q) (mean root square of the surface) were significantly lower for the NWRBM compared with AB/AE. The XPS spectra revealed the presence of Ca and P in the NWRBM. While no significant differences were observed for both BIC and BAFO parameters (P>0.35 and P>0.11, respectively), a significantly higher level of torque was observed for the NWRBM group (P=0.01). Bone morphology was similar between groups, which presented newly formed woven bone in proximity with the implant surfaces. CONCLUSION: A significant increase in early biomechanical fixation was observed for implants presenting the NWRBM surface.
Assuntos
Implantes Absorvíveis , Condicionamento Ácido do Dente , Implantação Dentária Endóssea/métodos , Implantes Dentários , Óxido de Alumínio , Animais , Fenômenos Biomecânicos , Cães , Microscopia Eletrônica de Varredura , Modelos Animais , Espectroscopia Fotoeletrônica , Estatísticas não Paramétricas , Propriedades de Superfície , TorqueRESUMO
Peri-implantitis is a plaque-associated condition characterized by mucosal inflammation and subsequent progressive loss of supporting bone; it is caused by bacterial biofilm, but the host response triggered by bacterial stimulation promotes the release of cells and mediators that culminate in tissue destruction. The Aryl-hydrocarbon Receptor (AhR) is associated with IL-22 production by Th22 and Th17 CD4+ Th cells. The presence of IL-6 may promote the Th22 phenotype. The present case-control study evaluated the gene expression of AhR, IL-22, and IL-6 in the peri-implant tissues of healthy and peri-implantitis patients. Tissue biopsies were collected from thirty-five volunteers (15 healthy and 20 with peri-implantitis). A real-time PCR reaction was utilized to assess the AhR, IL-22, and IL-6 gene expression levels relative to the reference gene (GAPDH). The results were analyzed using the Mann-Whitney test with a significance level of 5%. Higher levels of gene expression of AhR and IL-6 were detected in peri-implantitis tissues. The IL-22 gene expression levels did not differ between groups. In conclusion, higher gene expression levels for AhR and IL-6 were detected in the soft tissues of peri-implantitis patients. IL-22 did not vary between conditions, which may indicate the loss of the immunomodulatory role of IL-22 in periimplantitis.