RESUMO
Lipase B from Candida antarctica was immobilized on heterofunctional support octyl agarose activated with vinyl sulfone to prevent enzyme release under drastic conditions. Covalent attachment was established, but the blocking step using hexylamine, ethylenediamine or the amino acids glycine (Gly) and aspartic acid (Asp) altered the results. The activities were lower than those observed using the octyl biocatalyst, except when using ethylenediamine as blocking reagent and p-nitrophenol butyrate (pNPB) as substrate. The enzyme stability increased using these new biocatalysts at pH 7 and 9 using all blocking agents (much more significantly at pH 9), while it decreased at pH 5 except when using Gly as blocking agent. The stress inactivation of the biocatalysts decreased the enzyme activity versus three different substrates (pNPB, S-methyl mandelate and triacetin) in a relatively similar fashion. The tryptophane (Trp) fluorescence spectra were different for the biocatalysts, suggesting different enzyme conformations. However, the fluorescence spectra changes during the inactivation were not too different except for the biocatalyst blocked with Asp, suggesting that, except for this biocatalyst, the inactivation pathways may not be so different.
Assuntos
Enzimas Imobilizadas , Lipase , Lipase/metabolismo , Sefarose/química , Enzimas Imobilizadas/química , Butiratos , EtilenodiaminasRESUMO
Penicillin G acylase (PGA) from Escherichia coli was immobilized on vinyl sulfone (VS) agarose. The immobilization of the enzyme failed at all pH values using 50 mM of buffer, while the progressive increase of ionic strength permitted its rapid immobilization under all studied pH values. This suggests that the moderate hydrophobicity of VS groups is enough to transform the VS-agarose in a heterofunctional support, that is, a support bearing hydrophobic features (able to adsorb the proteins) and chemical reactivity (able to give covalent bonds). Once PGA was immobilized on this support, the PGA immobilization on VS-agarose was optimized with the purpose of obtaining a stable and active biocatalyst, optimizing the immobilization, incubation and blocking steps characteristics of this immobilization protocol. Optimal conditions were immobilization in 1 M of sodium sulfate at pH 7.0, incubation at pH 10.0 for 3 h in the presence of glycerol and phenyl acetic acid, and final blocking with glycine or ethanolamine. This produced biocatalysts with stabilities similar to that of the glyoxyl-PGA (the most stable biocatalyst of this enzyme described in literature), although presenting just over 55% of the initially offered enzyme activity versus the 80% that is recovered using the glyoxyl-PGA. This heterofuncionality of agarose VS beads opens new possibilities for enzyme immobilization on this support.
Assuntos
Penicilina Amidase , Estabilidade Enzimática , Enzimas Imobilizadas/química , Escherichia coli/metabolismo , Concentração de Íons de Hidrogênio , Concentração Osmolar , Penicilina Amidase/química , Sefarose/químicaRESUMO
A functional screening of 1152 clones from a plasmid library constructed with DNA extracted from Brazilian mangrove sediments revealed 3 positive clones for ester-hydrolyzing enzymes, or about one lipolytic gene per 1.2 Mb DNA, which corroborates the idea that oil-contaminated mangroves are a good source of novel microbial lipases/esterases. The partial sequence of the clone LipG7 (1179 bp) showed 30.2% of predicted structure identity with a known esterase, confirming LipG7 as a new member of family VIII esterases. LigG7 shared 80% sequence identity with 1,4-butanediol diacrylate esterase from the Gammaprotebacteria Porticoccus hydrocarbonoclasticus, suggesting it belongs to the Porticoccaceae family. LipG7 was heterologously expressed in Escherichia coli Rosetta-Gami DE3; the purified recombinant enzyme exhibited a predicted molecular weight of 45.2 kDa and exceptional activity towards 4-nitrophenyl butyrate, compared with other recombinant esterases, highlighting its enormous potential for biological applications.
Assuntos
Carboxilesterase/genética , Carboxilesterase/isolamento & purificação , Gammaproteobacteria/genética , Sequência de Aminoácidos/genética , Bactérias/genética , Bactérias/metabolismo , Sequência de Bases/genética , Brasil , Butiratos/metabolismo , Carboxilesterase/metabolismo , Esterases/metabolismo , Gammaproteobacteria/metabolismo , Expressão Gênica/genética , Biblioteca Gênica , Metagenoma/genética , Filogenia , Plasmídeos/genética , Alinhamento de Sequência/métodos , Análise de Sequência de DNA/métodos , Especificidade por Substrato/genética , Áreas AlagadasRESUMO
In this study, the modulation of enzymatic biocatalysts were developed by the use of lipase B from Candida antarctica covalently immobilized on an eco-friendly support, cashew apple bagasse, activated with 10% glycidol-ethylenediamine-glutaraldehyde (GEG) under different immobilization strategies (5 mM or 100 mM ionic strength and in absence or presence of 0.5% (v/v) Triton X-100). The biocatalysts were characterized for thermal and organic solvents stabilities and compared with the soluble enzyme. The biocatalysts were then applied to the hydrolysis of the rac-indanyl acetate (2:1 ratio enzyme/substrate) at pH 7.0 and 30 °C for 24 h. For all the strategies evaluated, GEG promoted kinetic resolution of rac-indanyl acetate with maximum conversion (50%) and led to (R)-indanol with excellent enantiomeric excess (97%), maintaining the maximum conversion for five consecutive cycles of hydrolysis. Therefore, the use of cashew apple bagasse has proved to be a promising eco-friendly support for enzyme immobilization, since it resulted in stable biocatalysts for enzymatic kinetic resolution.
Assuntos
Acetatos/química , Basidiomycota/enzimologia , Proteínas Fúngicas/química , Lipase/química , Anacardium/metabolismo , Candida/enzimologia , Estabilidade Enzimática , Enzimas Imobilizadas/química , Etilenodiaminas/química , Glutaral/química , Concentração de Íons de Hidrogênio , Cinética , Bases de Schiff , Solventes/química , Estereoisomerismo , Temperatura , Fatores de TempoRESUMO
In this work, the synthesis of two fruit flavor esters, namely methyl and ethyl butyrate, by lipase from Rhizomucor miehei immobilized onto chitosan in the presence of the surfactant sodium dodecyl sulfate SDS was investigated. In the optimized conditions, maximum esterification yield for ethyl butyrate and methyl butyrate was (92 ± 1%) and (89 ± 1%), respectively. Esterification yields for both reactions were comparable or even superior to the ones achieved when the synthesis was catalyzed by a commercial enzyme, Lipozyme®, at the same reaction conditions. For ethyl butyrate, the developed biocatalyst was used for seven consecutive cycles of reaction with retention of its catalytic activity. For methyl butyrate synthesis the biocatalyst was used for four consecutive cycles without loss of its catalytic activity. The results show that chitosan may be employed in obtaining biocatalysts with high catalytic efficiency and can successfully replace the currently commercial available biocatalysts.
Assuntos
Butiratos/química , Rhizomucor/metabolismo , Quitosana , Enzimas Imobilizadas , Esterificação , Ésteres/síntese química , Aromatizantes/síntese química , Proteínas Fúngicas , Cinética , Lipase/metabolismo , Lipase/farmacologia , Dodecilsulfato de Sódio/química , TensoativosRESUMO
In this communication, lipase A from Candida antarctica (CALA) was immobilized by covalent bonding on magnetic nanoparticles coated with chitosan and activated with glutaraldehyde, labelled CALA-MNP, (immobilization parameters: 84.1% ± 1.0 for immobilization yield and 208.0 ± 3.0 U/g ± 1.1 for derivative activity). CALA-MNP biocatalyst was characterized by X-ray Powder Diffraction (XRPD), Fourier Transform Infrared (FTIR) spectroscopy, Thermogravimetry (TG) and Scanning Electron Microscope (SEM), proving the incorporation of magnetite and the immobilization of CALA in the chitosan matrix. Besides, the immobilized biocatalyst showed a half-life 8-11 times higher than that of the soluble enzyme at pH 5-9. CALA showed the highest activity at pH 7, while CALA-MNP presented the highest activity at pH 10. The immobilized enzyme was more active than the free enzyme at all studied pH values, except pH 7.
Assuntos
Candida/enzimologia , Quitosana/química , Lipase/metabolismo , Nanopartículas de Magnetita/química , Estabilidade Enzimática , Enzimas Imobilizadas/metabolismo , Proteínas Fúngicas/metabolismoRESUMO
The synthesis of ethyl butyrate catalyzed by lipases A (CALA) or B (CALB) from Candida antarctica immobilized onto magnetic nanoparticles (MNP), CALA-MNP and CALB-MNP, respectively, is hereby reported. MNPs were prepared by co-precipitation, functionalized with 3-aminopropyltriethoxysilane, activated with glutaraldehyde, and then used as support to immobilize either CALA or CALB (immobilization yield: 100 ± 1.2% and 57.6 ± 3.8%; biocatalysts activities: 198.3 ± 2.7 Up-NPB/g and 52.9 ± 1.7 Up-NPB/g for CALA-MNP and CALB-MNP, respectively). X-ray diffraction and Raman spectroscopy analysis indicated the production of a magnetic nanomaterial with a diameter of 13.0 nm, whereas Fourier-transform infrared spectroscopy indicated functionalization, activation and enzyme immobilization. To determine the optimum conditions for the synthesis, a four-variable Central Composite Design (CCD) (biocatalyst content, molar ratio, temperature and time) was performed. Under optimized conditions (1:1, 45 °C and 6 h), it was possible to achieve 99.2 ± 0.3% of conversion for CALA-MNP (10 mg) and 97.5 ± 0.8% for CALB-MNP (12.5 mg), which retained approximately 80% of their activity after 10 consecutive cycles of esterification. Under ultrasonic irradiation, similar conversions were achieved but at 4 h of incubation, demonstrating the efficiency of ultrasound technology in the enzymatic synthesis of esters.
Assuntos
Butiratos/metabolismo , Candida/metabolismo , Enzimas Imobilizadas/química , Enzimas Imobilizadas/metabolismo , Proteínas Fúngicas/metabolismo , Lipase/metabolismo , Nanopartículas de Magnetita/química , Biocatálise , Esterificação/fisiologia , Glutaral/metabolismo , Ondas UltrassônicasRESUMO
l-Arabinose isomerase (EC 5.3.1.4) (l-AI) from Enterococcus faecium DBFIQ E36 was overproduced in Escherichia coli by designing a codon-optimized synthetic araA gene. Using this optimized gene, two N- and C-terminal His-tagged-l-AI proteins were produced. The cloning of the two chimeric genes into regulated expression vectors resulted in the production of high amounts of recombinant N-His-l-AI and C-His-l-AI in soluble and active forms. Both His-tagged enzymes were purified in a single step through metal-affinity chromatography and showed different kinetic and structural characteristics. Analytical ultracentrifugation revealed that C-His-l-AI was preferentially hexameric in solution, whereas N-His-l-AI was mainly monomeric. The specific activity of the N-His-l-AI at acidic pH was higher than that of C-His-l-AI and showed a maximum bioconversion yield of 26% at 50 °C for d-tagatose biosynthesis, with Km and Vmax parameters of 252 mM and 0.092 U mg-1, respectively. However, C-His-l-AI was more active and stable at alkaline pH than N-His-l-AI. N-His-l-AI follows a Michaelis-Menten kinetic, whereas C-His-l-AI fitted to a sigmoidal saturation curve.
Assuntos
Aldose-Cetose Isomerases/genética , Aldose-Cetose Isomerases/metabolismo , Enterococcus faecium/enzimologia , Enterococcus faecium/genética , Hexoses/biossíntese , Aldose-Cetose Isomerases/isolamento & purificação , Cromatografia de Afinidade , Ativação Enzimática , Escherichia coli/genética , Escherichia coli/metabolismo , Engenharia Genética , Proteínas Recombinantes , UltracentrifugaçãoRESUMO
In this work, the environmental compatibility of a biosurfactant produced by a Bacillus subtilis strain isolated from the soil of a Brazilian mangrove was investigated. The biosurfactant, identified as surfactin, is able to reduce surface tension (ST) to 31.5 ± 0.1 mN m-1 and exhibits a lowcritical micelle concentration (CMC) value (0.015 ± 0.003 g L-1). The highest crude biosurfactant concentration (224.3 ± 1.9 mg L-1) was reached at 72 h of fermentation. Acute toxicity tests, carried out with Daphnia magna, Vibrio fischeri and Selenastrum capricornutum indicated that the toxicity of the biosurfactant is lower than that of its chemically derived counterparts. The results of the biodegradability tests demonstrated that the crude surfactin extract was degraded by both Pseudomonas putida and a mixed population from a sewage-treatment plant, in both cases the biodegradation efficiency being dependent on the initial concentration of the biosurfactant. Finally, as the biodegradation percentages obtained fall within the acceptance limits established by the Organization for Economic Co-operation and Development (Guidelines for Testing of Chemicals, OECD 301E), crude surfactin can be classified as a "readily" biodegradable compound.
Assuntos
Bacillus subtilis/metabolismo , Tensoativos/metabolismo , Microbiologia da Água , Poluentes Químicos da Água/metabolismo , Biodegradação Ambiental , Brasil , Humanos , Tensoativos/toxicidade , Vibrio/efeitos dos fármacos , Poluentes Químicos da Água/toxicidade , Áreas AlagadasRESUMO
This research proposes the preparation of a two-layer laccase biocatalyst using genipin or/and glutaraldehyde as cross-linking agents. The multilayer biocatalysts were prepared using different combinations of genipin and glutaraldehyde in the individual preparation of the first and second laccase layers. First, chitosan was treated with genipin or glutaraldehyde, followed by the immobilization of the first laccase layer to form a single-layer biocatalyst. Then, the immobilized laccases were coated once again with genipin or glutaraldehyde, and a new laccase layer was immobilized onto the system, resulting in the final two-layer biocatalyst. Compared to the single-layer biocatalysts, catalytic activity increased 1.7- and 3.4-fold when glutaraldehyde coating was used to prepare the second laccase layer. However, adding a second layer did not always produce more active biocatalysts, since the two-layer biocatalysts prepared with genipin (GenLacGenLac and GluLacGenLac) presented a decrease in activity of 65% and 28%, respectively. However, these two-layer biocatalysts prepared with genipin maintained 100% of their initial activity after 5 cycles of ABTS oxidation. Nevertheless, the two-layer, genipin-coated biocatalyst resulted in a higher removal of trace organic contaminants, since it removed 100% of mefenamic acid and 66% of acetaminophen, compared with the glutaraldehyde-coated biocatalyst, which removed 20% of mefenamic acid, and 18% of acetaminophen.
Assuntos
Enzimas Imobilizadas , Lacase , Glutaral , Acetaminofen , Ácido MefenâmicoRESUMO
Calotropis procera cysteine peptidases (CpCPs) have presented several potential biotechnological applications. Here, these enzymes were immobilized on glyoxyl-agarose (glyoxyl-CpCPs) with yields of 90-95 % and the recovered activities ranged from 10 % to 15 %, according to enzyme loadings (5, 10, 20, 40, and 50 mgBSAeq/g). Spectrophotometric assays and SDS-PAGE showed that the casein hydrolysis by glyoxyl-CpCPs was similar to soluble CpCPs. In addition, glyoxyl-CpCPs exhibited similar ratio of milk-clotting activity to proteolytic activity in comparison with soluble CpCPs and chymosin. Even after being stored for six months at 8 °C, the residual proteolytic activity of glyoxyl-CpCPs remained close to 100 %. Atomic force microscopy and dynamic light scattering techniques showed that the process of casein micelle aggregation after treatment with glyoxyl-CpCPs was very similar to its soluble form and chymosin. Glyoxyl-CpCPs performed well after five reaction cycles, producing cheeses with yield, moisture, protein, and fat similar to those produced with chymosin.
Assuntos
Calotropis , Cisteína Proteases , Sefarose , Quimosina , Cisteína , Caseínas , Cisteína Proteases/metabolismo , Concentração de Íons de Hidrogênio , Enzimas Imobilizadas/metabolismoRESUMO
The potential of cashew apple bagasse as a source of sugars for ethanol production by Kluyveromyces marxianus CE025 was evaluated in this work. This strain was preliminarily cultivated in a synthetic medium containing glucose and xylose and was able to produce ethanol and xylitol at pH 4.5. Next, cashew apple bagasse hydrolysate (CABH) was prepared by a diluted sulfuric acid pretreatment and used as fermentation media. This hydrolysate is rich in glucose, xylose, and arabinose and contains traces of formic acid and acetic acid. In batch fermentations of CABH at pH 4.5, the strain produced only ethanol. The effects of temperature on the kinetic parameters of ethanol fermentation by K. marxianus CE025 using CABH were also evaluated. Maximum specific growth rate (µ(max)), overall yields of ethanol based on glucose consumption [Formula: see text] and based on glucose + xylose consumption (Y ( P/S )), overall yield of ethanol based on biomass (Y ( P/X )), and ethanol productivity (P (E)) were determined as a function of temperature. Best results of ethanol production were achieved at 30°C, which is also quite close to the optimum temperature for the formation of biomass. The process yielded 12.36 ± 0.06 g l(-1) of ethanol with a volumetric production rate of 0.257 ± 0.002 g l(-1) h(-1) and an ethanol yield of 0.417 ± 0.003 g g(-1) glucose.
Assuntos
Anacardium/metabolismo , Celulose/metabolismo , Etanol/metabolismo , Kluyveromyces/metabolismo , Arabinose/metabolismo , Biocombustíveis/economia , Biomassa , Biotecnologia , Conservação de Recursos Energéticos , Etanol/economia , Fermentação , Glucose/metabolismo , Ácidos Sulfúricos/química , Xilitol/metabolismo , XiloseRESUMO
Lipase from Thermomyces lanuginosus (TLL) has been covalently immobilized on heterofunctional octyl-vinyl agarose. That way, the covalently immobilized enzymes will have identical orientation. Then, it has blocked using hexyl amine (HEX), ethylenediamine (EDA), Gly and Asp. The initial activity/stability of the different biocatalysts was very different, being the most stable the biocatalyst blocked with Gly. These biocatalysts had been utilized to analyze if the enzyme activity could decrease differently along thermal inactivation courses depending on the utilized substrate (that is, if the enzyme specificity was altered during its inactivation using 4 different substrates to determine the activity), and if this can be altered by the nature of the blocking agent and the inactivation conditions (we use pH 5, 7 and 9). Results show great changes in the enzyme specificity during inactivation (e.g., activity versus triacetin was much more quickly lost than versus the other substrates), and how this was modulated by the immobilization protocol and inactivation conditions. The difference in the changes induced by immobilization and inactivation were confirmed by fluorescence studies. That is, the functional and structural analysis of partially inactivated immobilized enzyme showed that their inactivation pathway is strongly depended on the support features and inactivation conditions.
Assuntos
Enzimas Imobilizadas/química , Eurotiales/enzimologia , Proteínas Fúngicas/química , Lipase/química , Microesferas , Sefarose/análogos & derivados , Ácido Aspártico/química , Enzimas Imobilizadas/metabolismo , Etilenodiaminas/química , Proteínas Fúngicas/metabolismo , Glicina/química , Lipase/metabolismo , Especificidade por Substrato , Sulfonas/química , Triacetina/químicaRESUMO
The potential use of alternative culture media towards the development of a sustainable bioprocess to produce lipases by Diutina rugosa is clearly demonstrated. First, a synthetic medium containing glucose, peptone, yeast extract, oleic acid, and ammonium sulfate was proposed, with lipase activity of 143 U/L. Then, alternative culture media formulated with agro-industrial residues, such as molasses, corn steep liquor (CSL), and olive mill waste (OMW), were investigated. An experimental design was conducted, and only CSL concentration was found to have a positive effect in lipase production. The highest lipase activity (561 U/L) was produced on a mixture of molasses (5 g/L), CSL (6 g/L), OMW (0.5% v/v), 0.5 g/L of ammonium sulfate, and 3 g/L of peptone at 24 h of cultivation. Lipase production was also carried out in a 1-L bioreactor leading to a slightly higher lipase activity at 24 h of cultivation. The semi-purified enzyme exhibits an optimum temperature and pH of 40 °C and 7.0, respectively. Finally, the media cost per unit of lipase produced (UPC) was influenced by the medium components, specially by the inducer used. The lowest UPC was obtained when the agro-industrial residues were combined and used at the improved concentrations.
Assuntos
Reatores Biológicos , Proteínas Fúngicas/biossíntese , Microbiologia Industrial , Lipase/biossíntese , Saccharomycetales/enzimologia , Eliminação de Resíduos Líquidos , Meios de CulturaRESUMO
This study reports an alternative strategy for the expression of a recombinant L-AI from Enterococcus faecium DBFIQ E36 by auto-induction using glucose and glycerol as carbon sources and residual whey lactose as inducer agent. Commercial lactose and isopropyl ß-D-1-thiogalactopyranoside (IPTG) were also evaluated as inducers for comparison of enzyme expression levels. The enzymatic extracts were purified by affinity chromatography, characterized, and applied in the bioconversion of D-galactose into D-tagatose. L-AI presented a catalytic activity of 1.67 ± 0.14, 1.52 ± 0.01, and 0.7 ± 0.04 U/mL, when expressed using commercial lactose, lactose from whey, and IPTG, respectively. Higher activities could be obtained by changing the protocol of enzyme extraction and, for instance, the enzymatic extract produced with whey presented a catalytic activity of 3.8 U/mL. The specific activity of the enzyme extracts produced using lactose (commercial or residual whey) after enzyme purification was also higher when compared to the enzyme expressed with IPTG. Best results were achieved when enzyme expression was conducted using 4 g/L of residual whey lactose for 11 h. These results proved the efficacy of an alternative and economic protocol for the effective expression of a recombinant L-AI aiming its high-scale production.
Assuntos
Aldose-Cetose Isomerases/genética , Aldose-Cetose Isomerases/metabolismo , Enterococcus faecium/enzimologia , Escherichia coli/crescimento & desenvolvimento , Isopropiltiogalactosídeo/metabolismo , Lactose/metabolismo , Aldose-Cetose Isomerases/isolamento & purificação , Proteínas de Bactérias/genética , Proteínas de Bactérias/metabolismo , Clonagem Molecular , Meios de Cultura/química , Enterococcus faecium/genética , Escherichia coli/genética , Escherichia coli/metabolismo , Regulação Bacteriana da Expressão Gênica , Regulação Enzimológica da Expressão Gênica , Glucose/metabolismo , Glicerol/metabolismo , Concentração de Íons de Hidrogênio , Proteínas Recombinantes/metabolismo , Soro do Leite/químicaRESUMO
Co-immobilization is a groundbreaking technique for enzymatic catalysis, sometimes strategic, as for dextransucrase and dextranase. In this approach, dextranase hydrolytic action removes the dextran layer that covers dextransucrase reactive groups, improving the immobilization. Another advantage is the synergic effect of the two enzymes towards prebiotic oligosaccharides production. Thus, both enzymes were co-immobilized onto the heterobifunctional support Amino-Epoxy-Glyoxyl-Agarose (AMEG) and the ion exchanger support monoaminoethyl-N-ethyl-agarose (Manae) at pH 5.2 and 10, followed or not by glutaraldehyde treatment. This work is the first attempt to immobilize dextransucrase under alkaline conditions. The immobilized dextransucrase on AMEG support at pH 10 (12.78 ± 0.70 U/g) presents a similar activity of the biocatalyst produced at pH 5.2 (14.95 ± 0.82 U/g). The activity of dextranase immobilized onto Manae was 5-fold higher than the obtained onto AMEG support. However, the operational stability test showed that the biocatalyst produced on AMEG at pH 5.2 kept >60% of both enzyme activities for five batches. The glutaraldehyde treatment was not worthwhile to improve the operational stability of this biocatalyst.
Assuntos
Dextranase/química , Enzimas Imobilizadas/química , Glucosiltransferases/química , Sefarose/química , Catálise , Estabilidade Enzimática , Glutaral/química , Concentração de Íons de Hidrogênio , TemperaturaRESUMO
The insolubilization of a recombinant l-arabinose isomerase (l-AI) from Enterococcus faecium by cross-linked enzyme aggregates (CLEA) was investigated, aiming the biochemical production of d-tagatose from d-galactose. d-tagatose is a functional sweetener that has many health benefits, sweetening properties and lower calorific value. Different precipitants (ammonium sulfate, ethanol, acetone, polyethylene glycol 4000) were used in the first step of the protocol, in order to establish the precipitation conditions, and the best results of yield and activity were achieved with ammonium sulfate. In order to facilitate the recovery of the biocatalyst, a new strategy for immobilization of the multimeric enzyme l-arabinose isomerase was proposed. Magnetic cross-linked enzyme aggregates (m-CLEA) were obtained using ammonium sulfate as precipitant and magnetic nanoparticles (MNP) functionalized with APTES (3- Aminopropyltriethoxysilane). Another immobilization strategy was to immobilize the enzyme onto MNP-APTES, as a control. The best results were achieved when the m-CLEA was produced with 20 mg of MNP, 7.69 U. g-1 of enzymatic activity, 7.61 % of recovered activity, 99 % of yield of immobilization. On the other hand, the enzyme immobilized onto MNP-APTES, presented only 2.12 U. g-1 of enzymatic activity, 32.3 % of recovered activity, and 15 % of yield of immobilization.
Assuntos
Aldose-Cetose Isomerases/química , Enzimas Imobilizadas/química , Nanopartículas Magnéticas de Óxido de Ferro/química , Aldose-Cetose Isomerases/metabolismo , Sulfato de Amônio/química , Biocatálise , Enterococcus faecium/metabolismo , Ativação Enzimática , Estabilidade Enzimática , Enzimas Imobilizadas/metabolismo , Galactose/metabolismo , Hexoses/metabolismo , Propilaminas/química , Proteínas Recombinantes/química , Proteínas Recombinantes/metabolismo , Silanos/químicaRESUMO
A strategy to obtain biocatalysts formed by three enzyme layers has been designed using lipases A and B from Candida antarctica (CALA and CALB), the lipases from Rhizomucor miehei (RML) and Thermomyces lanuginosus (TLL), and the artificial chimeric phospholipase Lecitase Ultra (LEU). The enzymes were initially immobilized via interfacial activation on octyl-agarose beads, treated with polyethylenimine (PEI) and a new enzyme layer was immobilized on the octyl-enzyme-PEI composite by ion exchange, producing octyl-enzyme-PEI-enzyme biocatalysts. Except when using LEU, when the two-layer biocatalysts, a large percentage of the PEI-immobilized enzyme was released when a new batch of PEI was added. This was prevented by glutaraldehyde crosslinking. The enzyme modifications produced more active preparations in some cases while in other cases, the effect of the modifications was negative for enzyme activity. These effects of the enzymes modifications were also different when the enzyme was immobilized by interfacial activation or by ion exchange. In all cases, the 3-layer biocatalysts were more active than the single- or bi-layer biocatalysts with some of the assayed substrates. However, as the substrate diffusion problems increased when new enzyme layers were added, even a decrease in enzyme activity with some substrates was found after increasing the number of enzyme layers.
Assuntos
Biocatálise , Enzimas Imobilizadas/metabolismo , Lipase/metabolismo , Polietilenoimina/metabolismo , Sefarose/metabolismo , Candida/enzimologia , Estabilidade Enzimática , Proteínas Fúngicas/metabolismo , Glutaral/metabolismo , Cinética , Rhizomucor/enzimologiaRESUMO
The lipase from Thermomyces lanuginosus (TLL) has been immobilized on octyl-agarose beads via interfacial activation under 16 different conditions (changing the immobilization pH, the ionic strength, the presence of additives like calcium, phosphate or glycerol) and using a low loading (1â¯mg/g support). Then, the properties of the different biocatalysts have been evaluated: stability at pH 7.0 and 70⯰C and activity versus p-nitro phenyl propionate, triacetin and R- and S- methyl mandelate. Results clearly indicate that the immobilization conditions determine the final enzyme properties, altering enzyme stability (by 10 folds), activity (by 8 folds using R- methyl mandelate) and specificity (VR/VS changed from 0.7 to 2.3 using mandelate esters). For instance, the enzymes immobilized at pH 7.0 using 5â¯mM buffer were the most stable preparations, while the presence of 250â¯mM sodium phosphate greatly decreased the final enzyme stability. The biocatalyst stability of TLL increased with increasing NaCl in the immobilization buffer at pH 5. Fluorescence studies confirmed that the conformation of the different immobilized enzymes were different, despite being a physical and reversible immobilization method. Thus, the immobilization of TLL on octyl agarose beads under different conditions produced biocatalysts with different properties, the optimal condition depends on the studied reaction and condition.
Assuntos
Ascomicetos/enzimologia , Células Imobilizadas/enzimologia , Glioxilatos/química , Lipase/metabolismo , Sefarose/química , Biocatálise , Estabilidade Enzimática , CinéticaRESUMO
The lipase from Pseudomonas fluorescens (PFL) has been immobilized on octyl-agarose beads under 16 different conditions (varying pH, ionic strength, buffer, adding some additives) at two different loadings, 1 and 60 mg of enzyme/g of support with the objective of check if this can alter the biocatalyst features. The activity of the biocatalysts versus p-nitrophenyl butyrate and triacetin and their thermal stability were studied. The different immobilization conditions produced biocatalysts with very different features. Considering the extreme cases, using 1 mg/g preparations, PFL stability changed more than fourfolds, while their activities versus pNPB or triacetin varied a 50-60%. Curiously, PFL specific activity versus triacetin was higher using highly enzyme loaded biocatalysts than using lowly loaded biocatalysts (even by a twofold factor). Moreover, stability of the highly loaded preparations was higher than that of the lowly loaded preparations, in many instances even when using 5°C higher temperatures (e.g., immobilized in the presence of calcium, the highly loaded biocatalysts maintained after 24 h at 75°c a 85% of the initial activity, while the lowly loaded preparation maintained only 27% at 70°C). Using the highly loaded preparations, activity of the different biocatalysts versus pNPB varied almost 1.7-folds and versus triacetin 1.9-folds. In this instance, the changes in stability caused by the immobilization conditions were much more significant, some preparations were almost fully inactivated under conditions where the most stable one maintained more than 80% of the initial activity. Results suggested that immobilization conditions greatly affected the properties of the immobilized PFL, partially by individual molecule different conformation (observed using lowly loaded preparations) but much more relevantly using highly loaded preparations, very likely by altering some enzyme-enzyme intermolecular interactions. There is not an optimal biocatalyst considering all parameters. That way, preparation of biocatalysts using this support may be a powerful tool to tune enzyme features, if carefully controlled.