Ulysses spacecraft in situ detections of cometary dust trails.

The Ulysses spacecraft was launched in 1990 and, after a Jupiter swing-by in 1992, became the first interplanetary spacecraft orbiting the Sun on a highly inclined trajectory with an inclination of [Formula: see text]. The spacecraft was equipped with an impact ionization dust detector which provided 17 years of in situ dust measurements in interplanetary space from 1990 to 2007. Cometary meteoroid streams (also referred to as trails) exist along the orbits of comets, forming fine structures of the interplanetary dust cloud. We use the Interplanetary Meteoroid Environment for eXploration (IMEX) dust streams in space model (Soja RH et al. 2015 Characteristics of the dust trail of 67P/Churyumov-Gerasimenko: an application of the IMEX model. Astron. Astrophys. 583, A18. (doi:10.1051/0004-6361/201526184)) to predict cometary stream traverses by Ulysses and re-analyse the Ulysses dust dataset in order to identify impacts of cometary stream particles detected during such trail traverses. We identify 19 particles compatible with three Ulysses trail traverses on 12 March 1995, 25-27 April 2001 and 16-19 May 2001. The particle origin is compatible with up to five comets, i.e. 10P/Tempel 2, 146P/Shoemaker-LINEAR, 267P/LONEOS and possibly 45P/Honda-Mrkos-Pajdusáková and P/1999 RO28 (LONEOS). We find a dust spatial density in these trails of approximately [Formula: see text]. The radii of the detected cometary stream particles derived from the dust instrument calibration are in the micrometre range. The in situ analysis of meteoroid trail particles in space, which can be traced back to their source bodies, opens a new opportunity for remote compositional analysis of comets and asteroids without the necessity to send a spacecraft to or even land on these celestial bodies, opening new opportunities for future space missions equipped with in situ dust analyzers. This article is part of the theme issue 'Dust in the Solar System and beyond'.

High-molecular-weight organic matter in the particles of comet 67P/Churyumov-Gerasimenko.

The presence of solid carbonaceous matter in cometary dust was established by the detection of elements such as carbon, hydrogen, oxygen and nitrogen in particles from comet 1P/Halley. Such matter is generally thought to have originated in the interstellar medium, but it might have formed in the solar nebula-the cloud of gas and dust that was left over after the Sun formed. This solid carbonaceous material cannot be observed from Earth, so it has eluded unambiguous characterization. Many gaseous organic molecules, however, have been observed; they come mostly from the sublimation of ices at the surface or in the subsurface of cometary nuclei. These ices could have been formed from material inherited from the interstellar medium that suffered little processing in the solar nebula. Here we report the in situ detection of solid organic matter in the dust particles emitted by comet 67P/Churyumov-Gerasimenko; the carbon in this organic material is bound in very large macromolecular compounds, analogous to the insoluble organic matter found in the carbonaceous chondrite meteorites. The organic matter in meteorites might have formed in the interstellar medium and/or the solar nebula, but was almost certainly modified in the meteorites' parent bodies. We conclude that the observed cometary carbonaceous solid matter could have the same origin as the meteoritic insoluble organic matter, but suffered less modification before and/or after being incorporated into the comet.

High-velocity streams of dust originating from Saturn.

High-velocity submicrometre-sized dust particles expelled from the jovian system have been identified by dust detectors on board several spacecraft. On the basis of periodicities in the dust impact rate, Jupiter's moon Io was found to be the dominant source of the streams. The grains become positively charged within the plasma environment of Jupiter's magnetosphere, and gain energy from its co-rotational electric field. Outside the magnetosphere, the dynamics of the grains are governed by the interaction with the interplanetary magnetic field that eventually forms the streams. A similar process was suggested for Saturn. Here we report the discovery by the Cassini spacecraft of bursts of high-velocity dust particles (> or = 100 km s(-1)) within approximately 70 million kilometres of Saturn. Most of the particles detected at large distances appear to originate from the outskirts of Saturn's outermost main ring. All bursts of dust impacts detected within 150 Saturn radii are characterized by impact directions markedly different from those measured between the bursts, and they clearly coincide with the spacecraft's traversals through streams of compressed solar wind.

Mass spectrometry of hyper-velocity impacts of organic micrograins.

The study of hyper-velocity impacts of micrometeoroids is important for the calibration of dust sensors in space applications. For this purpose, submicron-sized synthetic dust grains comprising either polystyrene or poly[bis(4-vinylthiophenyl)sulfide] were coated with an ultrathin overlayer of an electrically conductive organic polymer (either polypyrrole or polyaniline) and were accelerated to speeds between 3 and 35 km s(-1) using the Heidelberg Dust Accelerator facility. Time-of-flight mass spectrometry was applied to analyse the resulting ionic impact plasma using a newly developed Large Area Mass Analyser (LAMA). Depending on the projectile type and the impact speed, both aliphatic and aromatic molecular ions and cluster species were identified in the mass spectra with masses up to 400 u. Clusters resulting from the target material (silver) and mixed clusters of target and projectile species were also observed. Impact velocities of between 10 and 35 km s(-1) are suitable for a principal identification of organic materials in micrometeoroids, whereas impact speeds below approximately 10 km s(-1) allow for an even more detailed analysis. Molecular ions and fragments reflect components of the parent molecule, providing determination of even complex organic molecules embedded in a dust grain. In contrast to previous measurements with the Cosmic Dust Analyser instrument, the employed LAMA instrument has a seven times higher mass resolution--approximately 200--which allowed for a detailed analysis of the complex mass spectra. These fundamental studies are expected to enhance our understanding of cometary, interplanetary and interstellar dust grains, which travel at similar hyper-velocities and are known to contain both aliphatic and aromatic organic compounds.

Measurement of incident position of hypervelocity particles on piezoelectric lead zirconate titanate detector.

A cosmic dust detector for use onboard a satellite is currently being developed by using piezoelectric lead zirconate titanate (PZT). The characteristics of the PZT detector have been studied by bombarding it with hypervelocity iron (Fe) particles supplied by a Van de Graaff accelerator. One central electrode and four peripheral electrodes were placed on the front surface of the PZT detector to measure the impact positions of the incident Fe particles. It was demonstrated that the point of impact on the PZT detector could be identified by using information on the time at which the first peak of the output signal obtained from each electrode appeared.

Experimental Methods of Dust Charging and Mobilization on Surfaces with Exposure to Ultraviolet Radiation or Plasmas.

Electrostatic dust transport has been hypothesized to explain a number of observations of unusual planetary phenomena. Here, it is demonstrated using three recently developed experiments in which dust particles are exposed to thermal plasma with beam electrons, beam electrons only, or ultraviolet (UV) radiation only. The UV light source has a narrow bandwidth in wavelength centered at 172 nm. The beam electrons with the energy of 120 eV are created with a negatively biased hot filament. When the vacuum chamber is filled with the argon gas, a thermal plasma is created in addition to the electron beam. Insulating dust particles of a few tens of microns in diameter are used in the experiments. Dust particles are recorded to be lofted to a height up to a few centimeters with a launch speed up to 1 m/s. These experiments demonstrate that photo and/or secondary electron emission from a dusty surface changes the charging mechanism of dust particles. According to the recently developed "patched charge model", the emitted electrons can be re-absorbed inside microcavities between neighboring dust particles below the surface, causing the accumulation of enhanced negative charges on the surrounding dust particles. The repulsive forces between these negatively charged particles may be large enough to mobilize and lift them off the surface. These experiments present the advanced understanding of dust charging and transport on dusty surfaces, and laid a foundation for future investigations of its role in the surface evolution of airless planetary bodies.

Cometary science. Dust measurements in the coma of comet 67P/Churyumov-Gerasimenko inbound to the Sun.

Critical measurements for understanding accretion and the dust/gas ratio in the solar nebula, where planets were forming 4.5 billion years ago, are being obtained by the GIADA (Grain Impact Analyser and Dust Accumulator) experiment on the European Space Agency's Rosetta spacecraft orbiting comet 67P/Churyumov-Gerasimenko. Between 3.6 and 3.4 astronomical units inbound, GIADA and OSIRIS (Optical, Spectroscopic, and Infrared Remote Imaging System) detected 35 outflowing grains of mass 10(-10) to 10(-7) kilograms, and 48 grains of mass 10(-5) to 10(-2) kilograms, respectively. Combined with gas data from the MIRO (Microwave Instrument for the Rosetta Orbiter) and ROSINA (Rosetta Orbiter Spectrometer for Ion and Neutral Analysis) instruments, we find a dust/gas mass ratio of 4 ± 2 averaged over the sunlit nucleus surface. A cloud of larger grains also encircles the nucleus in bound orbits from the previous perihelion. The largest orbiting clumps are meter-sized, confirming the dust/gas ratio of 3 inferred at perihelion from models of dust comae and trails.

Interstellar dust. Evidence for interstellar origin of seven dust particles collected by the Stardust spacecraft.

Seven particles captured by the Stardust Interstellar Dust Collector and returned to Earth for laboratory analysis have features consistent with an origin in the contemporary interstellar dust stream. More than 50 spacecraft debris particles were also identified. The interstellar dust candidates are readily distinguished from debris impacts on the basis of elemental composition and/or impact trajectory. The seven candidate interstellar particles are diverse in elemental composition, crystal structure, and size. The presence of crystalline grains and multiple iron-bearing phases, including sulfide, in some particles indicates that individual interstellar particles diverge from any one representative model of interstellar dust inferred from astronomical observations and theory.

3 MV hypervelocity dust accelerator at the Colorado Center for Lunar Dust and Atmospheric Studies.

A hypervelocity dust accelerator for studying micrometeorite impacts has been constructed at the Colorado Center for Lunar Dust and Atmospheric Studies (CCLDAS) at the University of Colorado. Based on the Max-Planck-Institüt für Kernphysik (MPI-K) accelerator, this accelerator is capable of emitting single particles of a specific mass and velocity selected by the user. The accelerator consists of a 3 MV Pelletron generator with a dust source, four image charge pickup detectors, and two interchangeable target chambers: a large high-vacuum test bed and an ultra-high vacuum impact study chamber. The large test bed is a 1.2 m diameter, 1.5 m long cylindrical vacuum chamber capable of pressures as low as 10(-7) torr while the ultra-high vacuum chamber is a 0.75 m diameter, 1.1 m long chamber capable of pressures as low as 10(-10) torr. Using iron dust of up to 2 microns in diameter, final velocities have been measured up to 52 km/s. The spread of the dust particles and the effect of electrostatic focusing have been measured using a long exposure CCD and a quartz target. Furthermore, a new technique of particle selection is being developed using real time digital filtering techniques. Signals are digitized and then cross-correlated with a shaped filter, resulting in a suppressed noise floor. Improvements over the MPI-K design, which include a higher operating voltage and digital filtering for detection, increase the available parameter space of dust emitted by the accelerator. The CCLDAS dust facility is a user facility open to the scientific community to assist with instrument calibrations and experiments.

A 2 MV Van de Graaff accelerator as a tool for planetary and impact physics research.

Investigating the dynamical and physical properties of cosmic dust can reveal a great deal of information about both the dust and its many sources. Over recent years, several spacecraft (e.g., Cassini, Stardust, Galileo, and Ulysses) have successfully characterised interstellar, interplanetary, and circumplanetary dust using a variety of techniques, including in situ analyses and sample return. Charge, mass, and velocity measurements of the dust are performed either directly (induced charge signals) or indirectly (mass and velocity from impact ionisation signals or crater morphology) and constrain the dynamical parameters of the dust grains. Dust compositional information may be obtained via either time-of-flight mass spectrometry of the impact plasma or direct sample return. The accurate and reliable interpretation of collected spacecraft data requires a comprehensive programme of terrestrial instrument calibration. This process involves accelerating suitable solar system analogue dust particles to hypervelocity speeds in the laboratory, an activity performed at the Max Planck Institut für Kernphysik in Heidelberg, Germany. Here, a 2 MV Van de Graaff accelerator electrostatically accelerates charged micron and submicron-sized dust particles to speeds up to 80 km s(-1). Recent advances in dust production and processing have allowed solar system analogue dust particles (silicates and other minerals) to be coated with a thin conductive shell, enabling them to be charged and accelerated. Refinements and upgrades to the beam line instrumentation and electronics now allow for the reliable selection of particles at velocities of 1-80 km s(-1) and with diameters of between 0.05 µm and 5 µm. This ability to select particles for subsequent impact studies based on their charges, masses, or velocities is provided by a particle selection unit (PSU). The PSU contains a field programmable gate array, capable of monitoring in real time the particles' speeds and charges, and is controlled remotely by a custom, platform independent, software package. The new control instrumentation and electronics, together with the wide range of accelerable particle types, allow the controlled investigation of hypervelocity impact phenomena across a hitherto unobtainable range of impact parameters.

Characteristics of a dust trajectory sensor.

Trajectories of cosmic dust particles are determined by the measurement of the electrical signals that are induced when a charged grain flies through a position-sensitive electrode system. A typical dust trajectory sensor has four sensor planes consisting of about 16 wire electrodes each. Two adjacent planes have orthogonal wire directions. The sensor is highly transparent and mechanically robust, provides a large sensitive area, large field of view, and can, at least in principle, achieve unlimited precision. While a sensor model had already undergone limited testing in the dust laboratory, its response as a function of position and angle of incidence of the trajectory and as a function of sensor dimensions was generally unknown. To better understand its characteristics, the operation of a sensor model consisting of three planes and seven wires per plane was simulated using the COULOMB computer program. We show that the response of the reduced model can be applied to a model with more planes and more wires per plane. The effect of a trajectory's position and angle on the signal strength is discussed as well as the influence of geometrical parameters such as wire diameter, distance between wire planes, and wire length. We found a greater effect of the wire diameter on the signal strength, and a lesser effect of the plane distance, than expected. A set of similarity rules is provided for the design of a larger sensor. Finally, we discuss the optimization of the sensor for different applications.

Cassini dust measurements at Enceladus and implications for the origin of the E ring.

During Cassini's close flyby of Enceladus on 14 July 2005, the High Rate Detector of the Cosmic Dust Analyzer registered micron-sized dust particles enveloping this satellite. The dust impact rate peaked about 1 minute before the closest approach of the spacecraft to the moon. This asymmetric signature is consistent with a locally enhanced dust production in the south polar region of Enceladus. Other Cassini experiments revealed evidence for geophysical activities near Enceladus' south pole: a high surface temperature and a release of water gas. Production or release of dust particles related to these processes may provide the dominant source of Saturn's E ring.

Composition of saturnian stream particles.

During Cassini's approach to Saturn, the Cosmic Dust Analyser (CDA) discovered streams of tiny (less than 20 nanometers) high-velocity (approximately 100 kilometers per second) dust particles escaping from the saturnian system. A fraction of these impactors originated from the outskirts of Saturn's dense A ring. The CDA time-of-flight mass spectrometer recorded 584 mass spectra from the stream particles. The particles consist predominantly of oxygen, silicon, and iron, with some evidence of water ice, ammonium, and perhaps carbon. The stream particles primarily consist of silicate materials, and this implies that the particles are impurities from the icy ring material rather than the ice particles themselves.

[The behavior of growth-influencing and steroid hormones in the blood plasma during pregnancy of Awassi sheep in Syria]. / Untersuchungen zum Verhalten von wachstumsbeeinflussenden und Steroidhormonen im Blutplasma während der Trächtigkeit bei Awassi-Schafen in Syrien.

In 11 Awassi ewes of a flock of 30 animals continuous investigations were carried out on the changes of somatogenic (growth hormone-GH, prolactin-PRL, insulin-like growth factor I-IGF-I) and steroid hormones (progesterone--PG, estradiol-17 beta-E2) in blood plasma during a gestation period. Eight animals were pregnant (3 with twins), 3 non-pregnant ewes served as control animals. Pregnancy is associated with an increase in the concentrations of the steroid hormones in blood plasma, they decrease markedly already prepartal (PG) or directly at term (E2), reflecting the placental origin of both hormones. Ewes with twins have higher concentrations of both steroid hormones in their blood plasma than animals with a single fetus. During pregnancy the concentrations of IGF-I in blood plasma increase continuously and normalize rapidly after birth. The relationship between the duration of the pregnancy and the concentration of IGF-I can be described by a quadratic regression, further positive correlations exist between the concentrations of IGF-I and PG or E2 in blood plasma, but a negative correlation between IGF-I and PRL. The concentration of PRL diminishes during the gestation, which reflects increasing seasonal influences (decreasing day length and environmental temperature). The concentration of GH shows a steady level throughout the gestation period. Both hormones increase markedly at term, which represents an attendant circumstance of the birth. From all hormones investigated in blood plasma of the ewes only the concentration of IGF-I exhibits a strong positive correlation with the birth weight of their lambs. This can be taken as a first hint to the ability of IGF-I to promote directly the fetal growth.

[The behavior of lactogenic and steroid hormones in the blood of Awassi ewes in Syria during lactation]. / Untersuchungen zum Verhalten von laktogenen und Steroidhormonen im Blutplasma während der Laktation bei Awassi-Schafen in Syrien.

The concentrations of lactogenic hormones (prolactin--PRL, growth hormone--GH, insulin-like growth factor I--IGF-I) and steroid hormones (progesterone--PG, estradiol--E2) were determined by RIA in the blood plasma of 8 lactating ewes (3 with twins) and compared with that of 3 non-lactating cycling ewes of the same age. All animals live in a flock of 30 Awassi sheep under identical conditions in Syria. The lactation period (192 +/- 25 days) is divided to a suckling period (until day 63) and a hand milking period (2 fold daily) with different levels of milk production (near 2 litres/day in the former, decreasing from 0.8 to 0.1 litre/day in the latter). During the suckling period the concentrations of steroid hormones in the blood plasma are lower, these of lactogenic hormones are higher of lactating than of non-lactating ewes. During the milking period only the concentrations of E2, PRL and IGF-I in the blood plasma of lactating animals are lower than in non-lactating ewes. But, during this time more and more seasonal influences (increasing day length and temperature) overwhelm the influence of lactation on the hormone secretion. Suckling of twins is accompanied with higher levels of E2, PRL and IGF-I in the blood plasma of their mothers than suckling of single lambs. During the lactation period a strong correlation exists between milk yield and the level of GH (r = 0.85) and IGF-I (r = 0.71), a smaller correlations to the level of E2 (r = 0.49) in the blood plasma of the lactating ewes. During the suckling period the milk yield is influenced positively by PRL (r = 0.77) and GH (r = 0.68), but negatively by PG (r = -0.76). During the milking period the milk yield is determined extensively by the level of IGF-I (r = 0.89) in the blood plasma. The concentrations of the analyzed hormones in the blood plasma correlate always positively together.