Porosity and root dentine to material interface assessment of calcium silicate-based root-end filling materials.

OBJECTIVES: The aim of this study was to evaluate the porosity and assess the root dentine to material interface of four root-end filling materials based on tricalcium silicate cement using two microscopy techniques. METHODS: The porosity of Bioaggregate, Biodentine, a prototype radiopacified tricalcium silicate cement (TCS-20-Zr) and intermediate restorative material (IRM) was evaluated after immersion for 28 days in Hank's balanced salt solution (HBSS) using mercury intrusion porosimetry. The root dentine to material interface of the cements when used as root-end filling materials in extracted human teeth was assessed after 28 days of dry storage and immersion in HBSS using a confocal microscope together with fluorescent tracers and also a field emission gun scanning electron microscope. RESULTS: Biodentine and IRM exhibited the lowest level or degree of porosity. The confocal microscopy used in conjunction to fluorescent tracers demonstrated that dry storage resulted in gaps at the root dentine to material interface and also cracks in the material with Biodentine being the most affected. Zinc was shown to be present in root dentine adjacent to the IRM restorations. CONCLUSIONS: Dry storage of Biodentine resulted in changes in the material microstructure and cracks at the root dentine to Biodentine interface. Furthermore, the gaps resulting from material shrinkage allowed the passage of the fluorescent microspheres thus indicating that these gaps are significant and can potentially allow the passage of micro-organisms.

Characterization of set Intermediate Restorative Material, Biodentine, Bioaggregate and a prototype calcium silicate cement for use as root-end filling materials.

AIM: To investigate the composition of materials and leachate of a hydrated prototype cement composed of tricalcium silicate and radiopacifier and compare this to other tricalcium silicate-based cements (Biodentine and Bioaggregate) to assess whether the additives in the proprietary brand cements affect the hydration of the materials, using Intermediate Restorative Material (IRM), a standard root-end filling material as a control. METHODOLOGY: The materials investigated included a prototype-radiopacified tricalcium silicate cement, Biodentine, Bioaggregate and Intermediate Restorative Material (IRM). The pH and calcium ion concentration of the leachate were investigated. The hydrated cements were characterized using scanning electron microscopy (SEM) and X-ray energy dispersive analysis (EDX), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR). RESULTS: All the cements tested were alkaline. The tricalcium silicate-based cements leached calcium in solution. Scanning electron microscopy of the prototype-radiopacified tricalcium silicate cement, Biodentine and Bioaggregate displayed hydrating cement grains, surrounded by a matrix composed of calcium silicate hydrate and calcium hydroxide. The presence of calcium hydroxide was evident from the XRD plots. FT-IR indicated the occurrence of a poorly crystalline calcium silicate hydrate. Biodentine displayed the presence of calcium carbonate. Bioaggregate incorporated a phosphate-containing phase. IRM consisted of zinc oxide interspersed in an organic matrix. CONCLUSIONS: The hydration of prototype-radiopacified tricalcium silicate cement, Biodentine and Bioaggregate resulted in the formation of calcium silicate hydrate and calcium hydroxide, which was leached in solution. The hydrated materials were composed of a cementitous phase that was rich in calcium and silicon and a radiopacifying material. Biodentine included calcium carbonate, and Bioaggregate included silica and calcium phosphate in the powders. IRM was composed of zinc oxide interspersed in a matrix of organic material.

Investigation of the physical properties of tricalcium silicate cement-based root-end filling materials.

OBJECTIVE: Tricalcium silicate-based cements have been displayed as suitable root-end filling materials. The physical properties of prototype radiopacified tricalcium silicate cement, Bioaggregate and Biodentine were investigated. Intermediate restorative material was used as a control. METHODS: The physical properties of a prototype zirconium oxide replaced tricalcium silicate cement and two proprietary cements composed of tricalcium silicate namely Bioaggregate and Biodentine were investigated. Intermediate restorative material (IRM) was used as a control. Radiopacity assessment was undertaken and expressed in thickness of aluminum. In addition the anti-washout resistance was investigated using a novel basket-drop method and the fluid uptake, sorption and solubility were investigated using a gravimetric method. The setting time was assessed using an indentation technique and compressive strength and micro-hardness of the test materials were investigated. All the testing was performed with the test materials immersed in Hank's balanced salt solution. RESULTS: All the materials tested had a radiopacity value higher than 3mm thickness of aluminum. IRM exhibited the highest radiopacity. Biodentine demonstrated a high washout, low fluid uptake and sorption values, low setting time and superior mechanical properties. The fluid uptake and setting time was the highest for Bioaggregate. SIGNIFICANCE: The addition of admixtures to tricalcium silicate-based cements affects the physical properties of the materials.