Ultrasensitive Photothermal Switching with Resonant Silicon Metasurfaces at Visible Bands.

Dynamic access to quasi-bound states in the continuum (q-BICs) offers a highly desired platform for silicon-based active nanophotonic applications, while the prevailing tuning approaches by free carrier injections via an all-optical stimulus are yet limited to THz and infrared ranges and are less effective in visible bands. In this work, we present the realization of active manipulations on q-BICs for nanoscale optical switching in the visible by introducing a local index perturbation through a photothermal mechanism. The sharp q-BIC resonance exhibits an ultrasensitive susceptibility to the complex index perturbation, which can be flexibly fulfilled by optical heating of silicon. Consequently, a mild pump intensity of 1 MW/cm2 can yield a modification of the imaginary part of the refractive index of less than 0.05, which effectively suppresses the sharp q-BIC resonances and renders an active modulation depth of reflectance exceeding 80%. Our research might open up an enabling platform for ultrasensitive dynamic nanophotonic devices.

Cascaded multicore fiber interferometers for enhanced bending sensing based on the Vernier effect.

In this paper, cascaded modal interferometers constructed by strongly-coupled seven-core fiber (SC-SCF) with different lengths are demonstrated for enhanced bending sensing based on Vernier effect. The free spectral range (FSR) of a single SC-SCF interferometer is determined by the length of SC-SCF. Two SC-SCF interferometers with different FSRs are cascaded, in which, one functions as the sensor while the other functions as the reference. The wavelength shift of the envelope of the output spectrum is much larger than that of a single SC-SCF interferometer due to the Vernier effect. Therefore, enhanced sensing can be achieved. Experimental results show that the bending sensitivity of the proposed sensor is improved from -2.20 nm/m-1 (single SC-SCF interferometer) to 42.32 nm/m-1 (cascaded SC-SCF interferometers). The temperature response of the sensor is also investigated. Our proposed cascaded SC-SCF sensor has advantages of high sensitivity, ease of fabrication, and low cost. It is attractive for high precision bending sensing applications.

Coded phase-sensitive OTDR with delayed polarization multiplexing for a WFBG array.

Polarization fading degrades the performance of phase-sensitive optical time-domain reflectometry (φ-OTDR) seriously and has to be suppressed. A novel scheme is proposed in this paper to combat polarization fading, which features a quite simple transceiver structure by exploiting both polarization diversity through delayed polarization multiplexing and the aperiodic autocorrelation of pseudorandom binary sequence. The components of Jones matrix of a sensing fiber are then shown at those four peaks of aperiodic autocorrelation and can be obtained directly without complicated computation to give a polarization independent phase variation due to vibration. Moreover, the scheme does not require stringent match between the delayed time and the spacing between sensors. The proposed scheme is demonstrated through experiment on a weak fiber Bragg grating (WFBG) array, which shows a high crosstalk rejection ratio among sensors of more than 50 dB and a high dynamic range of more than 30 dB.

Sensing characteristics of structural microfiber long-period gratings.

We present a detailed investigation into the sensing characteristics of a structural microfiber long-period grating (mLPG) sensor. By spirally winding a thinner microfiber to another thicker microfiber, periodic refractive index modulation is formed while the optical signal transmitted in the thicker microfiber is resonantly coupled out to the thinner microfiber, and then a 5-period four-port mLPG can be obtained with a device length of only ∼570 µm demonstrated a strong resonant dip of 25 dB. We studied the sensitivity characteristics of the four-port mLPG with surrounding strain, force, temperature and refractive index, and the obtained sensitivities were -6.4 pm/µÉ›, -8418.6 nm/N, 7.62 pm/°C and 2122 nm/RIU, respectively. With the advantages of high refractive index sensitivity and wide wavelength tunable range, the four-port mLPG has great potential in applications such as tunable filters and biochemical sensor.

Supermode Bragg grating inscribed in a strongly coupled seven-core fiber and its responses to temperature and curvature.

A Bragg grating is successfully inscribed in a piece of strongly coupled seven-core fiber (SCF). There are two separate Bragg resonance notches observed in the transmission spectrum, corresponding to backward coupling of HE11-like and HE12-like supermodes of the SCF. The mode coupling mechanism of the Bragg grating is theoretically investigated via modeling and analyzing modal properties of the SCF. The theoretical results agree well with the experimental results. Since the SCF is spliced between two standard single mode fibers with central alignments at both ends, the transmission spectrum of the device also contains a set of interference fringe due to modal interference between the supermodes. The device's responses to temperature and curvature are experimentally measured, respectively. The obtained temperature sensitivities and curvature sensitivities of the supermode Bragg grating notches are 9.55 pm/°C and 9.55 pm/°C, -1.8 pm/m-1 and -112.3 pm/m-1, respectively. The obtained temperature sensitivity and curvature sensitivity of one of the interference spectrum dips are 11.8 pm/°C and -3909.8 pm/m-1, respectively. This device is potentially useful for simultaneous measurement of temperature and curvature.

Near-infrared microfiber Bragg grating for sensitive measurement of tension and bending.

Fiber-optic devices working in the visible and near-infrared windows are attracting attention due to the rapid development of biomedicine that involves optics. In this work, we have successfully realized the fabrication of near-infrared microfiber Bragg grating (NIR-µFBG), which was operated at the wavelength of 785 nm, by harnessing the fourth harmonic order of Bragg resonance. The NIR-µFBG provided the maximum sensitivity of axial tension and bending to 211 nm/N and 0.18 nm/deg, respectively. By conferring the considerably lower cross-sensitivity, such as response to temperature or ambient refractive index, the NIR-µFBG can be potentially implemented as the highly sensitive tensile force and curve sensor.

In vivo endoscopic ultrasound imaging with a rotational-scanning, all-optical ultrasound probe.

All-optical ultrasound manipulates ultrasound waves based on laser and photonics technologies, providing an alternative approach for pulse-echo ultrasound imaging. However, its endoscopic imaging capability is limited ex vivo by the multifiber connection between the endoscopic probe and the console. Here, we report on all-optical ultrasound for in vivo endoscopic imaging using a rotational-scanning probe that relies on a small laser sensor to detect echo ultrasound waves. The acoustically induced lasing frequency change is measured via heterodyne detection by beating the two orthogonally polarized laser modes, enabling a stable output of ultrasonic responses and immunity to low-frequency thermal and mechanical disturbances. We miniaturize its optical driving and signal interrogation unit and synchronously rotate it with the imaging probe. This specialized design leaves a single-fiber connection to the proximal end and allows fast rotational scanning of the probe. As a result, we used a flexible, miniature all-optical ultrasound probe for in vivo rectal imaging with a B-scan rate of 1 Hz and a pullback range of ∼7 cm. This can visualize the gastrointestinal and extraluminal structures of a small animal. This imaging modality offers an imaging depth of 2 cm at a central frequency of ∼20 MHz, showing promise for high-frequency ultrasound imaging applications in gastroenterology and cardiology.

Fabry-Pérot Cavities with Suspended Palladium Membranes on Optical Fibers for Highly Sensitive Hydrogen Sensing.

Hydrogen (H2) sensors are critical to various applications such as the situation where H2 is used as the clean energy for industry or the indicator for human disease diagnosis. Palladium (Pd) is widely used as the hydrogen sensing material in different types of sensors. Optical fiber H2 sensors are particularly promising due to their compactness and spark-free operation. Here, we report a Fabry-Pérot (FP)-cavity-based H2 sensor that is formed with a freestanding Pd membrane and integrated on a conventional single-mode optical fiber end. The freestanding Pd membrane acts both as the active hydrogen sensing material and as one of the reflective mirrors of the cavity. When the Pd film absorbs H2 to form PdHx, it will be stretched, resulting in a change of the cavity length and thus a shift of the interference spectrum. The H2 concentration can be derived from the amplitude of the wavelength shift. Experimental results showed that H2 sensors based on suspended Pd membranes can achieve a detection sensitivity of about 3.6 pm/ppm and a detection limit of about 3.3 ppm. This highly sensitive detection scheme is expected to find applications for sensing low-concentration H2.

Optical Microfiber with a Gold Nanorods-Black Phosphorous Nanointerface: An Ultrasensitive Biosensor and Nanotherapy Platform.

The detection and therapy of cancers in the early stage significantly alleviate the associated dangers. Optical devices offer new opportunities for these early measures. However, the clinical translation of the existing methods is severely hindered by their relatively low sensitivity or unclear physiological metabolism. Here, an optical microfiber sensor with a drug loading gold nanorod-black phosphorous nanointerface, as an ultrasensitive biosensor and nanotherapy platform, is developed to meet the early-stage requirement. With interface sensitization and functionalization of the hybrid nanointerface, the microfiber sensor presents an ultrahigh sensing performance, achieving the selective detection of the HER2 biomarker with limits of detection of 0.66 aM in buffer solution and 0.77 aM in 10% serum. It can also distinguish breast cancer cells from other cells in the early stage. Additionally, enabled by the interface, the optical microfiber is able to realize cellular nanotherapy, including photothermal/chemotherapy with pump laser coupling after diagnosis, and evaluate therapy results in real time. The immobilization of the interface on the optical microfiber surface prevents the damage to normal cells induced by nanomaterial enrichment, making the device more efficient and intelligent. This study opens up a new avenue for the development of smart optical platforms for sensitive biosensing and precision therapy.

Deterministic Excitation of Polarization-Sensitive Extrinsic Anapole State in Si Nanodisk Clusters.

Nanoparticle clusters provide new degrees of freedom for light control due to their mutual interaction compared with an individual one. Here, the authors demonstrate theoretically and experimentally a type of optical anapole (a nonradiating state) termed as extrinsic anapole, with mode field spreading across Si nanodisk dimers unlike the intrinsic one that is confined within individual nanodisks. The extrinsic anapole is sensitive to the polarized excitation. When the electric vector E of excitation is perpendicular to the dimer axis, the coupled toroidal dipole (TD) mode is largely enhanced and broadened to be spectrally overlapped with the electric dipole (ED) mode. The destructive interference of these two modes results in the generation of the extrinsic anapole. However, it vanishes when E is parallel to the dimer axis. Such polarization dependence can be relieved with the participation of the third nanodisk. Scattering spectra of Si nanodisk trimers stay almost unchanged under different polarized excitations, although the near-field distributions are quite different. Finally, enhanced white-light emission is observed in Si nanodisk clusters, which can be attributed to the near-infrared absorption enhancement induced by extrinsic anapole states. The findings manifest that high-index all-dielectric nanodisk clusters are promising for light manipulation based on mode interference.

Surface-wettable nonenzymatic fiber-optic sensor for selective detection of hydrogen peroxide.

A micro-nanostructure-based surface-modified fiber-optic sensor has been developed herein to selectively detect hydrogen peroxide (H2O2). In our design, phenylboronic ester-modified polymers were used as a modified cladding medium that allows chemo-optic transduction. Sensing is mechanistically based on oxidation and subsequent hydrolysis of the phenylboronic ester-modified polymer, which modulates hydrophobic properties of fiber-optic devices, which was confirmed during characterization of the chemical functional group and hydrophobicity of the active sensing material. This work illustrates a useful strategy of exploiting principles of chemical modifications to design surface-wettable fiber-optic sensing devices for detecting reactive species of broad relevance to biological and environmental analyses.

Third harmonic phase-shifted Bragg grating sensor.

Improving sensitivity is critical for the higher-order harmonic fiber Bragg grating sensors. To this aim, in this work, we have successfully introduced the phase-shift into the third harmonic fiber Bragg grating for tailoring a double-dip spectrum with a high finesse notch. The dual dips showed reversed responses for the intensity regarding the change of the temperature or axial strain, enabling a highly sensitive measuring regime using the intensity contrast between the two dips. Deduced from the sinusoidal responding curves, the highest temperature and the axial strain sensitivity could reach 0.964 dB/°C, and 0.0257 dB/µ ε, three-fold times the other intensity-based fiber sensors. This work may promote the higher-order harmonic gratings into applications for enriching wavelength utilization.

Parity-time-symmetric optoelectronic oscillator based on higher-order optical modulation.

An optoelectronic oscillator (OEO) for single-frequency microwave generation, enabled by broken parity time (PT) symmetry based on higher-order modulation using a Mach-Zehnder modulator, is proposed and demonstrated. Instead of using two physically separated mutually coupled loops with balanced gain and loss, the PT symmetry is realized using a single physical loop to implement two equivalent loops with the gain loop formed by the beating between the optical carrier and the ±1st-order sidebands and the loss loop formed by the beating between the ±1st-order sidebands and the ±2nd-order sidebands at a photodetector. The gain and loss coefficients are made identical in magnitude by controlling the incident light power to the modulator and the modulator bias voltage. Once the gain/loss coefficient is greater than the coupling coefficient, the PT symmetry is broken, and a single-frequency oscillation without using an ultra-narrow passband filter is achieved. The approach is evaluated experimentally. For an OEO with a loop length of 10.1 km, a single-frequency microwave signal at 9.997 GHz with a 55-dB sidemode suppression ratio and -142-dBc/Hz phase noise at a 10-kHz offset frequency is generated. No mode hopping is observed during a 5-hour measurement period.

Visualizing nitroreductase activity in living cells and tissues under hypoxia and hepatic inflammation.

Detecting nitroreductase (NTR) activity in hypoxic cells and tissues in situ represents an important step toward accurate delineation of hypoxic disease loci. However, it remains challenging to develop fluorescent probes with the necessary attributes of selectivity, sensitivity, precise targeting and aqueous solubility. Herein, two kinds of fluorescent probes (NNP and cRGD-NNP) built on a 2-nitroimidazole sensing platform were synthesized for the detection of NTR activity in cell and in vivo models of hypoxia. In the presence of NADH, NNP displayed high selectivity for NTR, a strong fluorescence enhancement (108 fold), and a low detection limit (3.6 ng mL-1). Benefiting from the hydrophilic structure and tumor-targeting properties of the cRGD cyclopeptide group, the probe cRGD-NNP efficiently detected NTR activity in MCF cancer cells under hypoxia. In addition, the liposome-encapsulated probe was successfully applied to visualize NTR during liver inflammation in mice.

Large-Area Ordered Palladium Nanostructures by Colloidal Lithography for Hydrogen Sensing.

Reliable gas sensors are very important for hydrogen (H2) gas detection and storage. Detection methods based on palladium (Pd) metal are cost-effective and widely studied. When Pd is exposed to H2, it turns into palladium hydride with modified optical properties, which thus can be monitored for H2 sensing. Here, we fabricated large-area Pd nanostructures, including Pd nanotriangles and nanohole arrays, using colloidal lithography and systematically studied their H2-sensing performance. After hydrogen absorption, both the Pd nanoholes and nanotriangles showed clear transmittance changes in the visible-near infrared range, consistent with numerical simulation results. The influences of the structural parameters (period of the array P and diameter of the nanohole D) of the two structures are further studied, as different structural parameters can affect the hydrogen detection effect of the two structures. The nanohole arrays exhibited bigger transmittance changes than the nanotriangle arrays.

Efficient white upconversion luminescence in Yb3+/Eu3+ doubly-doped transparent glass ceramic.

Efficient white upconversion (UC) luminescence is obtained in Yb3+/Eu3+ doubly-doped optical glass ceramic (GC) for the first time. KYb3F10 nanocrystals are controllably precipitated from the amorphous networks via the inducing of Yb3+. Yb3+ ions are spontaneously confined within the compact fluoride crystal structures to produce efficient blue UC emissions of Yb3+-Yb3+ pairs. Eu3+ ions are easily incorporated into the KYb3F10 crystal lattices. Owing to the extremely short interionic distance in the crystal structures, intense green UC emissions apart from the red emissions of Eu3+ are observed, which are not obtained by the traditional Yb3+/Eu3+ doubly-doped GCs. As a result, white UC emissions are synthesized based on the three-primary-color principle and the emission intensities of GCs are dramatically enhanced as compared to glass. The designed GCs provide novel optical gain materials for the promising applications in three-dimensional display, solid-state lighting and tunable fiber lasers.

Ultra-narrow-band metamaterial perfect absorber based on surface lattice resonance in a WS2 nanodisk array.

Metamaterial perfect absorbers (MPAs) are attractive platforms for the unique manipulation of electromagnetic waves from near-field to far-field. Narrow-band MPAs are particularly intriguing for their potential applications as thermal emitters or biosensors. In this work, we proposed ultra-narrow-band MPAs based on surface lattice resonance (SLR) modes of WS2 nanodisk arrays on gold films. The SLR modes stem from the coupling between the magnetic dipole modes of individual nanodisks and the Rayleigh anomaly of the array giving rise to high quality-factor resonances. With proper design of the nanodisk array, an ultra-narrow-band of 15 nm is achieved in the near infrared wavelength range. The underneath gold film provides the loss channel converting the incident light within the narrow band into heat in the gold film, effectively creating a perfect absorber. Systematic numerical simulations were performed to investigate the effects of the geometrical parameters on their optical properties, demonstrating the great tunability of this type of MPAs as well as their potential for engineering light-matter interactions.

Au-NPs signal amplification ultra-sensitivity optical microfiber interferometric biosensor.

An optical microfiber interferometric biosensor for the low concentration detection of sequence-specific deoxyribonucleic acid (DNA) based on signal amplification technology via oligonucleotides linked to gold nanoparticles (Au-NPs) is proposed and experimentally analyzed. The sensor uses a "sandwich" detection strategy, in which capture probe DNA (DNA-c) is immobilized on the surface of the optical microfiber interferometer, the reporter probe DNA (DNA-r) is immobilized on the surface of Au-NPs, and the DNA-c and DNA-r are hybridized to the target probe DNA (DNA-t) in a sandwich arrangement. The dynamic detection of the DNA-t was found to range from 1.0×10-15 M to 1.0×10-8 M, and the limit of detection (LOD) concentration was 1.32 fM. This sensor exhibited not only a low LOD but also excellent selectivity against mismatched DNA-t, and it can be further developed for application in various sensing platforms.

Compact polarimetric heterodyning DBR fiber laser sensor with high temperature resistance.

We report on a short-cavity polarization beat-frequency distributed Bragg reflector (DBR) fiber laser that can operate in an unprecedentedly wide range of temperatures from -200∘ C to 500°C. The beat-frequency signal inherited by the intrinsic fiber birefringence enables implementation of the laser as an eligible temperature or hydrostatic pressure sensor. Furthermore, type-IIa Bragg reflectors allow the annealing of high temperature on the laser cavity to suppress the phase noise of the lasing signal effectively. This research will guide future attempts to achieve high-precision sensing and high-performance signal generation using polarized beat-frequency DBR fiber lasers in harsh environments.

3D nanointerface enhanced optical microfiber for real-time detection and sizing of single nanoparticles.

Portable devices, which can detect and characterize the individual nanoparticles in real time, are of insignificant interest for early diagnosis, homeland security, semiconductor manufacturing and environmental monitoring. Optical microfibers present a good potential in this field, however, are restricted by the sensitivity limit. This study reports the development of a 3D plasmonic nanointerface, which is made of a Cu-BTC framework supporting Cu3-xP nanocrystals, enhancing the optical microfiber for real-time detection and sizing of single nanoparticles. The Cu3-xP nanocrystals are successfully embedded in the 3D Cu-BTC framework. The localized-surface plasmon resonance is tuned to coincide with the evanescent field of the optical microfiber. The 3D Cu-BTC framework, as the scaffold of nanocrystals, confines the local resonance field on the microfiber with three dimensions, at which the binding of target nanoparticles occurs. Based on the evanescent field confinement and surface enhancement by the nanointerface, the optical microfiber sensor overcomes its sensitivity limit, and enables the detection and sizing of the individual nanoparticles. The compact size and low optical power supply of the sensor confirm its suitability as a portable device for the real-time single-nanoparticle characterization, especially for the convenient evaluation of the ultrafine particles in the environment. This work opens up an approach to overcome the sensitivity limit of the optical microfibers, as long with stimulating the portable real-time single-nanoparticle detection and sizing.