Anthropometric measures and obstructive sleep apnea in children and adolescents: a systematic review of the literature and meta-analysis.

BACKGROUND: Anthropometric measurements can be used to identify children at risk of developing obstructive sleep apnea (OSA). The study aimed to assess which anthropometric measurements (AMs) are most associated with an increased predisposition to develop OSA in healthy children and adolescents. METHODS: We performed a systematic review (PROSPERO #CRD42022310572) that searched eight databases and gray literature. RESULTS: In eight studies with low-to-high risk of bias, investigators reported the following AMs: body mass index (BMI), neck circumference, hip circumference, waist-to-hip ratio, neck-to-waist ratio, waist circumference, waist-to-height ratio, and facial AMs. The meta-analysis showed that the OSA group had an average of 1.00 cm greater for the neck circumference (p < 0.001; Cohen's d = 2.26 [0.72, 5.23]), 3.07 cm greater for the waist circumference (p = 0.030; Cohen's d = 0.28 [0.02, 0.53]), 3.96 cm greater for the hip circumference (p = 0.040; Cohen's d = 0.28 [0.02, 0.55]), 5.21° greater for the cervicomental angle (p = 0.020; Cohen's d = 0.31 [0.03, 0.59]), and 1.23° greater for maxillary-mandibular relationship angle (p < 0.001; Cohen's d = 0.47 [0.22, 0.72]) than the control group. The mandibular depth angle had a reduction of 1.86° (p = 0.001; Cohen's d = -0.36° [-0.65, -0.08]) in control than in patients with OSA. The BMI (p = 0.180), waist-to-hip ratio (p = 0.280), neck-to-waist ratio (p = 0.070), maxillary depth angle (p = 0.250), and upper/lower face height ratio (p = 0.070) showed no significant differences between groups. CONCLUSIONS: Compared to the control group, the OSA group exhibited a greater mean difference in neck circumference, the only anthropometric measurement with high certainty of evidence.

Mandibular advancement device in obstructive sleep apnea treatment: what happens to the condyle position and patient response?

BACKGROUND: This study aims primarily to assess the mandibular condyles and patient response to MAD therapy using cone-beam computed tomography (CBCT). Also, the study proposes to analyze whether variations in condylar position, OSA severity and mandibular protrusion influence patient response. METHODS: 23 patients diagnosed with mild/moderate OSA and treated with MAD comprised the sample. Clinical, CBCT, and PSG assessments were conducted at baseline and with MAD in therapeutic protrusion (4-6 months of MAD use). The condyle position was vertically and horizontally evaluated at baseline and at the therapeutic protrusion. RESULTS: The condyle position significantly changed with MAD, showing anterior (7.3 ± 2.8 mm; p < 0.001) and inferior (3.5 ± 1 mm; p < 0.001) displacement. Patients with mild OSA required more protrusion (p = 0.02) for improvement. Responders exhibited a significantly prominent (p = 0.04) anterior baseline condyle position. A negative modest correlation was found between treatment response and baseline condyle anterior position (p = 0.03; r=-0.4), as well as between OSA severity and the percentage of maximum protrusion needed for therapeutic protrusion (p = 0.02; r=-0.4). The patient protrusion amount did not predict condylar positional changes. Neither condyle position, OSA severity, nor therapeutic protrusion were predictors of MAD treatment response. CONCLUSION: MAD resulted in anterior and inferior condylar displacement, and the amount of protrusion did not predict condylar positional changes. Responders showed a more anterior baseline condyle position. OSA severity and mandibular protrusion did not predict treatment response.

Enhancing skeletal stability and Class III correction through active orthodontist engagement in virtual surgical planning: A voxel-based 3-dimensional analysis.

INTRODUCTION: Skeletal stability after bimaxillary surgical correction of Class III malocclusion was investigated through a qualitative and quantitative analysis of the maxilla and the distal and proximal mandibular segments using a 3-dimensional voxel-based superimposition among virtual surgical predictions performed by the orthodontist in close communication with the maxillofacial surgeon and 12-18 months postoperative outcomes. METHODS: A comprehensive secondary data analysis was conducted on deidentified preoperative (1 month before surgery [T1]) and 12-18 months postoperative (midterm [T2]) cone-beam computed tomography scans, along with virtual surgical planning (VSP) data obtained by Dolphin Imaging software. The sample for the study consisted of 17 patients (mean age, 24.8 ± 3.5 years). Using 3D Slicer software, automated tools based on deep-learning approaches were used for cone-beam computed tomography orientation, registration, bone segmentation, and landmark identification. Colormaps were generated for qualitative analysis, whereas linear and angular differences between the planned (T1-VSP) and observed (T1-T2) outcomes were calculated for quantitative assessments. Statistical analysis was conducted with a significance level of α = 0.05. RESULTS: The midterm surgical outcomes revealed a slight but significantly less maxillary advancement compared with the planned position (mean difference, 1.84 ± 1.50 mm; P = 0.004). The repositioning of the mandibular distal segment was stable, with insignificant differences in linear (T1-VSP, 1.01 ± 3.66 mm; T1-T2, 0.32 ± 4.17 mm) and angular (T1-VSP, 1.53° ± 1.60°; T1-T2, 1.54° ± 1.50°) displacements (P >0.05). The proximal segments exhibited lateral displacement within 1.5° for both the mandibular right and left ramus at T1-VSP and T1-T2 (P >0.05). CONCLUSIONS: The analysis of fully digital planned and surgically repositioned maxilla and mandible revealed excellent precision. In the midterm surgical outcomes of maxillary advancement, a minor deviation from the planned anterior movement was observed.

Methodological parameters for upper airway assessment by cone-beam computed tomography in adults with obstructive sleep apnea: a systematic review of the literature and meta-analysis.

BACKGROUND: A reliable method for analyzing the upper airway (UA) remains a challenge. This study aimed to report the methods for UA assessment using cone-beam computed tomography (CBCT) in adults with obstructive sleep apnea (OSA). METHODS: We performed a systematic review (PROSPERO #CRD42021237490 and PRISMA checklist) that applied a search strategy to seven databases and grey literature. RESULTS: In 29 studies with moderate-to-high risk of bias, investigators mostly reported the body position during CBCT (upright or supine) and hard tissue references, diverging in UA delimitation and terminologies. The meta-analysis showed two subgroups (upright and supine), and no statistical differences were identified (p = 0.18) considering the UA area. The volume in the OSA group was smaller than that in the control group (p < 0.003 and Cohen's d = - 0.81) in the upright position. Patients with OSA showed smaller anteroposterior dimensions than the control group and were not affected by the position during image acquisition (p = 0.02; Cohen's d = - 0.52). The lateral measurements were also lower in the OSA group (supine) (p = 0.002; Cohen's d = - 0.6). CONCLUSIONS: Patients with OSA showed smaller UA measurements in the upright (volume) and supine (lateral dimension) positions. The anteroposterior dimension was also reduced in patients with OSA compared to the control group, regardless of the position during CBCT acquisition.

Three-dimensional decision support system for treatment of canine impaction.

INTRODUCTION: This study aimed to develop a 3-dimensional (3D) characterization of the severity of maxillary impacted canines and to test the clinical performance of this characterization as a treatment decision support tool. METHODS: Cone-beam computed tomography images obtained from 83 patients with 120 impacted maxillary canines were included. Quantitative information on the canine 3D position and qualitative assessment of root damage of adjacent teeth were evaluated. A severity index was constructed on the basis of the quantitative findings. Clinical applicability was tested by comparing clinical diagnosis and treatment planning for conventional records vs the 3D characterization via a 2-part survey. RESULTS: The average quantitative assessments of impacted maxillary canine position were 6.4 ± 3.6 mm from the midsagittal plane, 11.6 ± 3.1 mm in height relative to the occlusal plane, 31.5° ± 18° of roll, and 48.8° ± 14.3° of pitch. The severity index ranged from 0-13 with a mean score of 4.5 ± 2.2. Overlap with adjacent teeth was the greatest contributor (33%) to the index. Bicortically impacted canines caused the most severe root damage. Cone-beam computed tomography was preferred for assessing root damage and overall severity, whereas conventional imaging was sufficient for height and angulation assessment. The 3D report was very important or important for evaluating root damage, canine position, overall severity, and overlap. The 3D report changed most of the decisions relating to biomechanics, patient education, and treatment time estimate. The decision of exposure and traction vs extraction was changed 22% of the time after the presentation of the 3D report. CONCLUSIONS: The overlap with adjacent teeth frequently contributes the most to the severity index. The 3D report provided relevant clinical information regarding the canine position, damage to adjacent teeth, and the severity index, with a profound impact on the decisions of the clinicians regarding biomechanics, patient education, and treatment time estimate.

Clear aligner mandibular advancement in growing patients with Class II malocclusion.

Treatment effects occurring during Class II malocclusion treatment with the clear aligner mandibular advancement protocol were evaluated in two growing patients: one male (12 years, 3 months) and one female (11 years, 9 months). Both patients presented with full cusp Class II molar and canine relationships. Intraoral scans and cone-beam computed tomography were acquired before treatment and after mandibular advancement. Three-dimensional skeletal and dental long-axis changes were quantified, in which the dental long axis was determined by registering the dental crowns obtained from intraoral scans to the root canals in cone-beam computed tomography scans obtained at the same time points. Class II correction was achieved by a combination of mandibular skeletal and dental changes. A similar direction of skeletal and dental changes was observed in both patients, with downward and forward displacement of the mandible resulting from the growth of the mandibular condyle and ramus. Dental changes in both patients included mesialization of the mandibular posterior teeth with flaring of mandibular anterior teeth. In these two patients, clear aligner mandibular advancement was an effective treatment modality for Class II malocclusion correction with skeletal and dental effects and facial profile improvement.

Predicting Osteoarthritis of the Temporomandibular Joint Using Random Forest with Privileged Information.

Osteoarthritis of the temporomandibular joint (TMJ OA) is the most common disorder of the TMJ. A clinical decision support (CDS) system designed to detect TMJ OA could function as a useful screening tool as part of regular check-ups to detect early onset. This study implements a CDS concept model based on Random Forest and dubbed RF+ to predict TMJ OA with the hypothesis that a model which leverages high-resolution radiological and biomarker data in training only can improve predictions compared with a baseline model which does not use privileged information. We found that the RF+ model can outperform the baseline model even when privileged features are not of gold standard quality. Additionally, we introduce a novel method for post-hoc feature analysis, finding shortRunHighGreyLevelEmphasis of the lateral condyles and joint distance to be the most important features from the privileged modalities for predicting TMJ OA.

Is jaw fractal dimension a reliable biomarker for osteoporosis screening? A systematic review and meta-analysis of diagnostic test accuracy studies.

OBJECTIVES: To summarize the evidence on the feasibility of maxillomandibular imaging exams-related fractal dimension (FD) in screening patients with osteoporosis. METHODS: This registered systematic review followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses of Diagnostic Test Accuracy statement. High sensitivity search strategies were developed for six primary databases and grey literature. Quality Assessment of Diagnostic Accuracy Studies (QUADAS-2) items evaluated the risk of bias, and the GRADE approach assessed the evidence certainty. RESULTS: From 1034 records initially identified through database searching, four studies were included (total sample of 747 patients [osteoporosis, 136; control group, 611]). The meta-analysis showed that the overall sensitivity and specificity of the FD were 86.17 and 72.68%, respectively. In general, all studies showed low RoB and applicability concern. The certainty of the evidence was very low to moderate. CONCLUSIONS: This systematic review showed that the jaw-related FD presented sensitivity and specificity values higher than 70%, and its sensitivity in osteoporosis screening was a better parameter than specificity.

3D Slicer Craniomaxillofacial Modules Support Patient-Specific Decision-Making for Personalized Healthcare in Dental Research.

The biggest challenge to improve the diagnosis and therapies of Craniomaxillofacial conditions is to translate algorithms and software developments towards the creation of holistic patient models. A complete picture of the individual patient for treatment planning and personalized healthcare requires a compilation of clinician-friendly algorithms to provide minimally invasive diagnostic techniques with multimodal image integration and analysis. We describe here the implementation of the open-source Craniomaxillofacial module of the 3D Slicer software, as well as its clinical applications. This paper proposes data management approaches for multisource data extraction, registration, visualization, and quantification. These applications integrate medical images with clinical and biological data analytics, user studies, and other heterogeneous data.

Efeitos do aparelho reposicionador mandibular no tratamento da apneia obstrutiva do sono / Effects of the mandibular repositioning appliance on the treatment of obstructive sleep apnea

Objetivou-se avaliar e quantificar, por meio de tomografias computadorizadas de feixe cônico (TCFC), as mudanças ocorridas na configuração anatômica da orofaringe de pacientes com Síndrome da Apneia Obstrutiva do Sono (SAOS) após a instalação de aparelho reposicionador mandibular, bem como avaliar se as possíveis alterações na faringe têm influência sobre os parâmetros polissonográficos de pacientes com SAOS. Foram triados dez pacientes com diagnóstico polissonográfico de SAOS leve/moderada. Medidas na via aérea superior foram realizadas a partir de imagens obtidas de TCFC antes da instalação do aparelho intraoral (AIO) (T1) e após atingir 85% do avanço mandibular máximo (T2). Nesses dois momentos também foram realizados os exames polissonográficos. Em relação às medidas de via aérea analisadas, houve alteração significativa apenas da região com mais constrição (p=0.019). Quanto aos valores polissonográficos, entre T1 e T2 houve uma diminuição significativa do índice de apneia e hipopneia (IAH) (p=0,000), elevação da saturação de oxiemoglobina média (p=0.005) e da saturação de oxiemoglobina mínima (p=0.010). Concluiu-se que o uso de aparelho intraoral de avanço mandibular não modificou significativamente a via aérea superior dos pacientes da amostra estudada, mas influenciou favoravelmente na melhora dos parâmetros polissonográficos.

The aim of this study was to evaluate and quantify, by means of computed tomography cone beam (CBCT), changes in the anatomical configuration of the oropharynx of patients with Obstructive Sleep Apnea Syndrome (OSAS) after mandibular repositioning appliance installation and assess whether the possible changes in the pharynx influence polysomnographic parameters of patients with OSAS. Ten patients were screened with polysomnographic diagnosis of mild OSA/moderate. Measurement from upper airway was performed using CBCT images obtained before oral appliance (OA) installation (T1) and after reaching 85% of the maximum mandibular advancement (T2). Polysomnographic exams were also performed at these same stages. The analysis of airway measures indicated significant change just in the most constricted area (p=0.019). As for the polysomnographic values between T1 and T2, there was a significant decrease in apnea and hypopnea index (AHI) (p=0.000), an increase on mean oxyhemoglobin saturation (p=0.005), and on minimum oxyhemoglobin saturation (P=0010). It was concluded that the use of intraoral mandibular advancement device did not result on significant changes on patients’ upper airway. However it had a favorable influence on the improvement of polysomnographic parameters.