Recurrent Aortic Infections Due to Unrecognized Aorto-Enteric Fistula.

We report a case of an infrarenal abdominal aortic aneurysm (AAA) with unrecognized primary aortoduodenal fistula (ADF), treated by endovascular aortic repair (EVAR). Endograft infection was diagnosed 12 months thereafter. The associated ADF was uncovered during open surgery, which included endograft extraction, in situ aortic reconstruction with a cryopreserved homograft (CHG) and duodenal repair. The patient was urgently reoperated in the early postoperative course, due to CHG rupture and subsequent hemorrhagic shock. After establishing control of hemorrhage, CHG was explanted, followed by aortic ligation and extraanatomical reconstruction with axillofemoral bypass. The importance of timely diagnosis of primary ADF prior to AAA repair, as well as treatment options and optimal materials for simultaneous aortic and bowel reconstruction in the setting of primary or secondary ADF, are discussed.

Endovascular Treatment of a Late False Aneurysm Complicating Open Suprarenal Mycotic Aneurysm Repair with a Cryopreserved Aortic Homograft.

We report a patient who was initially treated for a suprarenal mycotic aortic aneurysm. The aneurysm repair was performed using a cryopreserved arterial homograft and debranching of visceral arteries. Five years later, the patient was referred due to a large symptomatic false aneurysm at the distal homograft anastomosis. Endovascular repair was indicated and performed using a bifurcated Medtronic composite stent graft. The procedure was uneventful, while control angiography showed complete exclusion of the false aneurysm. Within 6 months of follow-up, the endograft showed favorable position and maintained patency with no signs of endoleaks. We discuss the role of the cryopreserved homografts for in situ repair of mycotic aortic aneurysms and comment on possible late complications after placing those grafts.

[FEMUR FRACTURES IN CHILDREN ­ CAUSES AND MECHANISMS OF INJURY].

Children are often exposed to injuries due to their hyperactivity. Femur fractures can however leave permanent consequences despite adequate treatment. The high prevalence and possible invalidity justify research in the field of prevention of this injury. But prevention is possible only by knowing the causes and circumstances of the fractures. The aim of this research is to analyze the circumstances and places of occurrence in femur fractures according to children age groups. This retrospective study includes 103 children up to the age of 18 years treated at the University Hospital Center of Medicine Zagreb, or at the Clinic for children diseases Zagreb in the period from 2012 to 2016. The study includes 35 (33 %) girls and 71 (67 %) boys, a total of 106 children with femur fractures. The average age was five years. The majority of the injured children, 52 children (55,2 %), belonged to the youngest age group from 0 to 4 years of age. Diaphysis fractures were the most common with 66 fractures (62 %), and the rarest were fractures of the distal metaphysis with 15 fractures (13 %). The fractures occurred at home in 41 cases (38 %), in the street in 38 cases (36 %), at recreation in 22 cases (21 5), and at school or kindergarten in 3 cases (3 %). The most common causes of femur fractures were falls in 38 cases (57,5 %), motor vehicle accidents in 35 cases (33 %), and crashes and blows in 10 cases (9,5 %). One third of the children with femur fractures had associated injuries, and four fifths of them were caused by motor vehicle accidents. The results of this study show that femur fractures are most frequent in the youngest age groups, and are generally a consequence of accidents at home (mostly falls), seldom in the streets or recreational places. Parents of preschool children should be educated about prevention of falling at their homes, and parents of school children should be educated about the dangers of fractures at recreational places and traffic.

[EXOTHERMIC REACTIONS OF PLASTER IMMOBILIZATION ­ ANALYSIS OF THREE KINDS OF PLASTER BANDAGES].

Exothermic reaction of plaster is a very important characteristic to understand, especially when it comes to complications which can occur during local temperature change during molding plaster of Paris. And these complications directly influence the speed and quality of treatment. In this paper we measured temperatures of plaster bandage tiles 10×10 cm, from three different manufacturers in Croatian hospitals: Safix plus (Hartmann, Germany), Cellona (Lohmann &Rauscher, Austria) and Gipsan ( Ivo Lola Ribar, Croatia). We made three different plaster tiles 10×10 cm, from 10, 15 and 30 layers of plaster bandages. We immersed plaster tiles in two different water temperatures, one group in water 22 °C, and another in 34 °C. Although all plaster bandages have similar chemical characteristics, we have measured some differences. All three kinds of plaster bandages used in Croatia have low exothermic reaction when plaster molding is done in standard conditions, average local temperature is low and there is no danger of local burns. We immersed a plaster tile with 15 layers in water on 34° C, and highest average temperature was measured at Gipsan (46.2 °C), then Cellona (41.3 °C) and Safix plus (38.9 °C). On the same water immersion temperature, on plaster tile with 30 layers average temperatures were Gipsan (48.4°C), Cellona (45.4 °C), and lowest in Safix plus (41.3 °C). Plaster tiles form all manufacturers, when used 15-30 layers thick, and water immersion temperature is 34°C, develop average temperature over 40°C, in duration from 8-12 minutes. Between three different plaster bandages analyzed, Gipsan (Ivo Lola Ribar, Croatia) developed highest temperature, and some plaster tiles were measured over 50 °C.

[FRONTAL, AXILLARY AND TYMPANIC TEMPERATURE MEASUREMENTS IN CHILDREN]. / TIMPANICNA, FRONTALNA I AKSILARNA TEMPERATURA U DJECE.

The purpose of this study was to compare the results of body temperature measurements obtained by standard axillary thermometers with the results of infrared tympanic and frontal skin thermometry in afebrile children. This study comprises a single-center, prospective comparison trial. A total of 345 afebrile children aged 4 to 16 years hospitalized in the pediatric surgery department for elective surgery were included. One thousand axillary, tympanic and frontal measurements were obtained and compared. We used two different infrared thermometers in this study; one type measured the tympanic temperature, the other the temperature on the forehead. The axillary temperature measured with the glass thermometer was set as the standard. Each patient was exposed to a constant environmental temperature for a minimum of 10 min before simultaneous temperature measurements. The mean-frontal temperature 36.9 ± 0.38 °C was equal to the axillary temperature 36.9 ± 0.16 °C. The mean tympanic temperature was 36.3 ± 0.98 °C. The mean difference between the tympanic and axillary temperatures was -0.4 °C. The tympanic temperature had a threefold greater dispersion than frontal and a fivefold greater dispersion than axillary temperature. The results of this study suggest that the axillary temperature measured with glass thermometer has the least dispersion. Somewhat less reliable is the frontal temperature measured with infrared thermometer. The least reliable is tympanic temperature measurement.

[PHYSICAL PROPERTIES OF PLASTER BANDAGES]. / FIZIKALNA SVOJSTVA SADRENIH ZAVOJA.

The physical properties of plaster bandages are a very important factor in achieving the basic functions of immobilization (maintaining bone fragments in the best possible position), which directly affects the speed and quality of fracture healing. This paper compares the differences between the physical properties of plaster bandages (mass, specific weight, drying rate, elasticity and strength) and records the differences in plaster modeling of fast bonding 10 cm wide plaster bandages, from three different manufacturers: Safix plus (Hartmann, Germany), Cellona (Lohman Rauscher, Austria) and Gipsan (Ivo Lola Ribar ltd., Croatia). Plaster tiles from ten layers of plaster, dimension 10 x 10 cm were made. The total number of tiles from each manufacturer was 48. The water temperature of 22 °C was used for the first 24 tiles and 34 'C was used for the remainder. The average specific weight of the original packaging was: Cellona (0.52 g/cm3), Gipsan (0.50 g/cm3), Safix plus (0.38 g/cm3). Three days after plaster tile modeling an average specific weight of the tiles was: Gipsan (1.15 g/cm3), Safix plus (1.00 g/cm3), Cellona (1.10 g/cm3). The average humidity of 50% for Safix plus and Cellona plaster tiles was recorded 18 hours after modeling, while for the Gipsan plaster tiles, this humidity value was seen after 48 hours. On the third day after plaster modeling the average humidity of the plaster tiles was 30% for Gipsan, 24% for Safix and 16% for Cellona. Cellona plaster tiles made with 34 °C water achieved the highest elasticity (11.75±3.18 MPa), and Gipsan plaster tiles made with 22 °C had the lowest (7.21±0.9 MPa). Cellona plaster tiles made with 34 °C water showed maximum material strength (4390±838 MPa), and Gipsan plaster tiles made with 22 °C water showed the lowest material strength (771±367 MPa). The rigidity and strength of Cellona and Gipsan plaster are higher in tiles made in warmer water, and for Safix plus are higher in tiles made in cooler water. All three types of plaster differentiate in physical properties. The differences in mass and specific weight before and after plaster modeling are minimal. There are greater differences in drying rate, elasticity and strength between the three different plaster materials.

Defect Reconstruction of an Infected Diabetic Foot Using Split- and Full-thickness Skin Grafts With Adjuvant Negative Pressure Wound Therapy: A Case Report and Review of the Literature.

INTRODUCTION: Any alteration or impairment to normal wound healing can result in the development of chronic wounds, which may lead to serious complications such as infection and loss of body fluid and proteins. Primary closure alone may not be sufficient to fulfill the criteria of successful defect reconstruction. Therefore, additional procedures such as skin grafting must be considered as an option. CASE REPORT: The case of a 43-year-old woman with diabetes who was admitted to the University Hospital Rebro (Zagreb, Croatia) due to an infected, nonhealing wound on her left foot. Skin grafts combined with negative pressure wound therapy (NPWT) before and after graft application improved wound healing in this patient. CONCLUSIONS: In this patient, the combination of skin grafts with NPWT before and after graft application reduced the comorbidities and complications often seen in the diabetic patient population. Herein, the authors utilized a quicker, cost-efficient, and safer technique of wound closure compared with traditional nonsurgical methods.

Analysis of Airborne Dust as a Result of Plaster Cast Sawing.

Plaster splints are used daily in surgical and orthopedic fields in order to immobilize injured children and adults. The aim of this study was to measure the aerodynamic diameter and concentration of dust particles in the air caused by sawing plaster splints (calcium sulfate dehy-drate). We performed fractional measurements of airborne dust particles. The measured particles, which can potentially be inhaled, may have a specific negative effect on human health. Measurements were conducted in laboratory research facilities that simulated hospital conditions within a casting room and the associated waiting room. Measurements within the casting room were made using two particle collector devices and one laser photometer. The measurement for the simulated waiting room was performed using the same principles and devices. The collected plaster dust particles differed in aerodynamic diameter and concentration according to the various locations observed. The highest concentration of particles of all sizes was recorded at the site of cast sawing. There was direct correlation between distance from the source and concentration of airborne particles; this concentration was lowest in the waiting room. The concentrations of plaster dust recorded were lower than the recommended minimal limit values for total and respiratory fractions in Croatia. Accordingly, it can be assumed that sawing of plaster splints has no harmful health effects on the exposed patients and health personnel.

Thermal changes during healing of distal radius fractures-Preliminary findings.

INTRODUCTION: The bone healing process is very complex. In simple terms, bone healing comprises three basic steps, the inflammation phase, the repair phase and the remodelling phase. The increase in blood flow around the fracture during the healing process increases the temperature of the surrounding tissue. Infrared thermography is a method of measuring body temperature that can detect temperature changes during bone healing. Studies on the application of thermography in traumatology are scarce, and there are no studies of thermal changes during normal bone healing. The authors have tried to determine the dynamics of thermal changes during bone healing. MATERIAL AND METHODS: The Flir ThermaCam B2 (FLIR Systems, Inc., Oregon, USA) was used for all measurements. Thermographic recordings were made one, three, five, 11 and 23 weeks after fracture. The contralateral, healthy, forearm was used for comparison. RESULTS: A total of 25 patients of mean age 65.9±10.4 years (range 50-80 years) with fracture of the distal radius were examined in this study. The mean temperature difference between healthy and fractured distal forearm one week after fracture was 1.20±0.48°C, three weeks after fracture was 1.42±0.54°C, five weeks after fracture was 1.04±0.53°C, 11 weeks after fracture was 0.50±0.30°C, and 23 weeks after fracture was 0.22±0.25°C. CONCLUSION: Preliminary findings during this research showed significant temperature changes during healing of distal radius fractures. Infrared thermography is a simple and reliable method in clinical practice that could be used as a good follow-up method in traumatology, but further investigations on more patients are needed.

Reducing damage to the periosteal capillary network caused by internal fixation plating: An experimental study.

BACKGROUND: The importance of the periosteum in fracture healing is well-known. Preserving periosteal vascularisation is essential during internal plate fixation of fractures. METHODS: This was an experimental randomised, controlled animal study on nine sheep. Standard dynamic compression plate (DCP) and four different newly designed reefed plates, with different plate-bone contact surface areas and different reef directions, were fixated on to the tibia or radius. After two weeks the plates were removed and the underlying periosteum was analysed. Blood vessels were marked by immunohistochemical staining (CD31 and CD34), microphotographs were taken and blood vessels counted to calculate blood vessel density. RESULTS: Median blood vessel density beneath the standard plate was significantly lower than in the intact periosteum (18.0 vs 27.7mm(3)/cm(3)). Blood vessel density in the periosteum beneath plates with reefs was significantly increased compared with the intact periosteum, and was highest beneath the plate with the lowest bone-plate contact area and crosswise reefs (51.5mm(3)/cm(3)), followed by plates with transverse, oblique and longitudinal reefs, respectively. The direction of the reefs did not have much influence on the periosteal capillary network. Lower contact surface area seems to be the main factor that increases blood vessel density beneath the plates. CONCLUSIONS: The results show that plates with lower contact surface area stimulate angiogenesis in the underlying periosteum, which results in much higher blood vessel density compared with standard DCP. A randomised clinical trial is needed to prove the clinical relevance of these findings.

Operative management of unstable ankle fractures in the elderly: our institutional experience.

Ankle fractures represent an exceptionally common injury within the elderly population. The total incidence of ankle fractures has been reported to be up to 184 fractures per 100,000 persons per year, of which 20 to 30 percent occur in the elderly. This study reports the results of operative management of ankle fractures in the elderly, with regard to functional outcome and complication rates. This was a retrospective, non-randomized observational study. Subjects were identified from a trauma registry kept in our Department and were tested for eligibility. Patients were then categorized into two groups according to their age: Group A included all patients less than 65 years of age and Group B included all patients over the age of 65. The outcome was measured using the AOFAS Ankle-Hindfoot score and a Linear analog scale. A total of 120 consecutive patients fulfilled the eligibility criteria and were included in our study (60 patients in each group). We detected statistically significant difference between the LAS score of the two groups (p=0.02), the alignment between the two groups (p=0.04) and the AOFAS score versus LAS score in Group B (p=0.03). Two patients from Group B had wound dehiscence, but finally their wounds healed uneventfully. We didn't observe any serious complications such as skin necrosis, deep infection, osteomyelitis and failure of metalwork. Our study suggests that the operative management of Weber B2 and B3 injuries can result in a favorable outcome. It is however of great importance that there are no delays in treatment, that the reduction is anatomical, that the fracture fixation is satisfactory and that the rehabilitation is commenced early.

Mathematical approximation of fibular malleolus curvature.

While there are several manuscripts describing the articular surfaces of the ankle joint and the fibula itself, there is no study describing the outer surface and the degree of curvature of the fibular malleolus. This paper aims to approximate the sagital curvature of the outer surface of the lateral malleolus mathematically. Such data would facilitate the design of the anatomic plate that can be used for the ostheosynthesis of the fibular malleolus fracture. 30 males who were examined in the emergency department due to ankle sprains, where they underwent a standard anteroposterior x-ray of the ankle in the neutral position were recruited. The radiographs which revealed no bony injury were digitized and statistically processed. A mathematical function for each separate fibula was obtained through the processing of the digitized x-rays. When all the functions were applied to one graph, common traits of all fibulas were noted. The mean value of all functions was obtained and it corresponds to the polynomial function of degree 6. Mathematical approximation of the curvature is a simple and reliable method that can be applied to other ellipsoid human bone structures besides the ankle, thus being a valuable method in anthropometric, radiological and virtual geometric calculations.