Anionic nanoparticle-induced perturbation to phospholipid membranes affects ion channel function.

Understanding the mechanisms of nanoparticle interaction with cell membranes is essential for designing materials for applications such as bioimaging and drug delivery, as well as for assessing engineered nanomaterial safety. Much attention has focused on nanoparticles that bind strongly to biological membranes or induce membrane damage, leading to adverse impacts on cells. More subtle effects on membrane function mediated via changes in biophysical properties of the phospholipid bilayer have received little study. Here, we combine electrophysiology measurements, infrared spectroscopy, and molecular dynamics simulations to obtain insight into a mode of nanoparticle-mediated modulation of membrane protein function that was previously only hinted at in prior work. Electrophysiology measurements on gramicidin A (gA) ion channels embedded in planar suspended lipid bilayers demonstrate that anionic gold nanoparticles (AuNPs) reduce channel activity and extend channel lifetimes without disrupting membrane integrity, in a manner consistent with changes in membrane mechanical properties. Vibrational spectroscopy indicates that AuNP interaction with the bilayer does not perturb the conformation of membrane-embedded gA. Molecular dynamics simulations reinforce the experimental findings, showing that anionic AuNPs do not directly interact with embedded gA channels but perturb the local properties of lipid bilayers. Our results are most consistent with a mechanism in which anionic AuNPs disrupt ion channel function in an indirect manner by altering the mechanical properties of the surrounding bilayer. Alteration of membrane mechanical properties represents a potentially important mechanism by which nanoparticles induce biological effects, as the function of many embedded membrane proteins depends on phospholipid bilayer biophysical properties.

Energy Starvation in Daphnia magna from Exposure to a Lithium Cobalt Oxide Nanomaterial.

Growing evidence across organisms points to altered energy metabolism as an adverse outcome of metal oxide nanomaterial toxicity, with a mechanism of toxicity potentially related to the redox chemistry of processes involved in energy production. Despite this evidence, the significance of this mechanism has gone unrecognized in nanotoxicology due to the field's focus on oxidative stress as a universal─but nonspecific─nanotoxicity mechanism. To further explore metabolic impacts, we determined lithium cobalt oxide's (LCO's) effects on these pathways in the model organism Daphnia magna through global gene-expression analysis using RNA-Seq and untargeted metabolomics by direct-injection mass spectrometry. Our results show that a sublethal 1 mg/L 48 h exposure of D. magna to LCO nanosheets causes significant impacts on metabolic pathways versus untreated controls, while exposure to ions released over 48 h does not. Specifically, transcriptomic analysis using DAVID indicated significant enrichment (Benjamini-adjusted p ≤0.0.5) in LCO-exposed animals for changes in pathways involved in the cellular response to starvation (25 genes), mitochondrial function (70 genes), ATP-binding (70 genes), oxidative phosphorylation (53 genes), NADH dehydrogenase activity (12 genes), and protein biosynthesis (40 genes). Metabolomic analysis using MetaboAnalyst indicated significant enrichment (γ-adjusted p <0.1) for changes in amino acid metabolism (19 metabolites) and starch, sucrose, and galactose metabolism (7 metabolites). Overlap of significantly impacted pathways by RNA-Seq and metabolomics suggests amino acid breakdown and increased sugar import for energy production. Results indicate that LCO-exposed Daphnia respond to energy starvation by altering metabolic pathways, both at the gene expression and metabolite levels. These results support altered energy production as a sensitive nanotoxicity adverse outcome for LCO exposure and suggest negative impacts on energy metabolism as an important avenue for future studies of nanotoxicity, including for other biological systems and for metal oxide nanomaterials more broadly.

Influence of Surface Ligand Molecular Structure on Phospholipid Membrane Disruption by Cationic Nanoparticles.

Cationic nanoparticles are known to interact with biological membranes and often cause serious membrane damage. Therefore, it is important to understand the molecular mechanism for such interactions and the factors that impact the degree of membrane damage. Previously, we have demonstrated that spatial distribution of molecular charge at cationic nanoparticle surfaces plays an important role in determining the cellular uptake and membrane damage of these nanoparticles. In this work, using diamond nanoparticles (DNPs) functionalized with five different amine-based surface ligands and small phospholipid unilamellar vesicles (SUVs), we further investigate how chemical features and conformational flexibility of surface ligands impact nanoparticle/membrane interactions. 31P-NMR T2 relaxation measurements quantify the mobility changes in lipid dynamics upon exposing the SUVs to functional DNPs, and coarse-grained molecular dynamics simulations further elucidate molecular details for the different modes of DNP-SUV interactions depending on the surface ligands. Collectively, our results show that the length of the hydrophobic segment and conformational flexibility of surface ligands are two key factors that dictate the degree of membrane damage by the DNP, while the amount of surface charge alone is not predictive of the strength of interaction.

Influence of Sensor Coating and Topography on Protein and Nanoparticle Interaction with Supported Lipid Bilayers.

Supported lipid bilayers (SLBs) have proven to be valuable model systems for studying the interactions of proteins, peptides, and nanoparticles with biological membranes. The physicochemical properties (e.g., topography, coating) of the solid substrate may affect the formation and properties of supported phospholipid bilayers, and thus, subsequent interactions with biomolecules or nanoparticles. Here, we examine the influence of support coating (SiO2 vs Si3N4) and topography [sensors with embedded vs protruding gold nanodisks for nanoplasmonic sensing (NPS)] on the formation and subsequent interactions of supported phospholipid bilayers with the model protein cytochrome c and with cationic polymer-wrapped quantum dots using quartz crystal microbalance with dissipation monitoring and NPS techniques. The specific protein and nanoparticle were chosen because they differ in the degree to which they penetrate the bilayer. We find that bilayer formation and subsequent non-penetrative association with cytochrome c were not significantly influenced by substrate composition or topography. In contrast, the interactions of nanoparticles with SLBs depended on the substrate composition. The substrate-dependence of nanoparticle adsorption is attributed to the more negative zeta-potential of the bilayers supported by the silica vs the silicon nitride substrate and to the penetration of the cationic polymer wrapping the nanoparticles into the bilayer. Our results indicate that the degree to which nanoscale analytes interact with SLBs may be influenced by the underlying substrate material.

High-Density Covalent Grafting of Spin-Active Molecular Moieties to Diamond Surfaces.

Functionalization of diamond surfaces with TEMPO and other surface paramagnetic species represents one approach to the implementation of novel chemical detection schemes that make use of shallow quantum color defects such as silicon-vacancy (SiV) and nitrogen-vacancy (NV) centers. Yet, prior approaches to quantum-based chemical sensing have been hampered by the absence of high-quality surface functionalization schemes for linking radicals to diamond surfaces. Here, we demonstrate a highly controlled approach to the functionalization of diamond surfaces with carboxylic acid groups via all-carbon tethers of different lengths, followed by covalent chemistry to yield high-quality, TEMPO-modified surfaces. Our studies yield estimated surface densities of 4-amino-TEMPO of approximately 1.4 molecules nm-2 on nanodiamond (varying with molecular linker length) and 3.3 molecules nm-2 on planar diamond. These values are higher than those reported previously using other functionalization methods. The ζ-potential of nanodiamonds was used to track reaction progress and elucidate the regioselectivity of the reaction between ethenyl and carboxylate groups and surface radicals.

Influence of the Spatial Distribution of Cationic Functional Groups at Nanoparticle Surfaces on Bacterial Viability and Membrane Interactions.

While positively charged nanomaterials induce cytotoxicity in many organisms, much less is known about how the spatial distribution and presentation of molecular surface charge impact nanoparticle-biological interactions. We systematically functionalized diamond nanoparticle surfaces with five different cationic surface molecules having different molecular structures and conformations, including four small ligands and one polymer, and we then probed the molecular-level interaction between these nanoparticles and bacterial cells. Shewanella oneidensis MR-1 was used as a model bacterial cell system to investigate how the molecular length and conformation of cationic surface charges influence their interactions with the Gram-negative bacterial membranes. Nuclear magnetic resonance (NMR) and X-ray photoelectron spectroscopy (XPS) demonstrate the covalent modification of the nanoparticle surface with the desired cationic organic monolayers. Surprisingly, bacterial growth-based viability (GBV) and membrane damage assays both show only minimal biological impact by the NPs functionalized with short cationic ligands within the concentration range tested, yet NPs covalently linked to a cationic polymer induce strong cytotoxicity, including reduced cellular viability and significant membrane damage at the same concentration of cationic groups. Transmission electron microscopy (TEM) images of these NP-exposed bacterial cells show that NPs functionalized with cationic polymers induce significant membrane distortion and the production of outer membrane vesicle-like features, while NPs bearing short cationic ligands only exhibit weak membrane association. Our results demonstrate that the spatial distribution of molecular charge plays a key role in controlling the interaction of cationic nanoparticles with bacterial cell membranes and the subsequent biological impact. Nanoparticles functionalized with ligands having different lengths and conformations can have large differences in interactions even while having nearly identical zeta potentials. While the zeta potential is a convenient and commonly used measure of nanoparticle charge, it does not capture essential differences in molecular-level nanoparticle properties that control their biological impact.

Energy Storage Materials as Emerging Nano-contaminants.

New and emerging nanotechnologies are increasingly using nanomaterials that undergo significant chemical reactions upon exposure to environmental conditions. The rapid advent of lithium ion batteries for energy storage in mobile electronics and electric vehicles is leading to rapid increases in the manufacture of complex transition metal oxides that incorporate elements such as Co and Ni that have the potential for significant adverse biological impact. This Perspective summarizes some of the important technological drivers behind complex oxide materials and highlights some of the chemical transformations that need to be understood in order to assess the overall environmental impact associated with energy storage technologies.

Cobalt Release from a Nanoscale Multiphase Lithiated Cobalt Phosphate Dominates Interaction with Shewanella oneidensis MR-1 and Bacillus subtilis SB491.

Cobalt phosphate engineered nanomaterials (ENMs) are an important class of materials that are used as lithium ion battery cathodes, catalysts, and potentially as super capacitors. As production of these nanomaterials increases, so does the likelihood of their environmental release; however, to date, there are relatively few investigations of the impact of nanoscale metal phosphates on biological systems. Furthermore, nanomaterials used in commercial applications are often multiphase materials, and analysis of the toxic potential of mixtures of nanomaterials has been rare. In this work, we studied the interactions of two model environmental bacteria, Shewanella oneidensis MR-1 and Bacillus subtilis, with a multiphase lithiated cobalt phosphate (mLCP) nanomaterial. Using a growth-based viability assay, we found that mLCP was toxic to both bacteria used in this study. To understand the observed toxicity, we screened for production of reactive oxygen species (ROS) and release of Co2+ from mLCP using three abiotic fluorophores. We also used Newport Green DCF dye to show that cobalt was taken up by the bacteria after mLCP exposure. Using transmission electron microscopy, we noted that the mLCP was not associated with the bacterial cell surface. In order for us to further probe the mechanism of interaction of mLCP, the bacteria were exposed to an equivalent dose of cobalt ions that dissolved from mLCP, which recapitulated the changes in viability when the bacteria were exposed to mLCP, and it also recapitulated the observed bacterial uptake of cobalt. Taken together, this implicates the release of cobalt ions and their subsequent uptake by the bacteria as the major toxicity mechanism of mLCP. The properties of the ENM govern the release rate of cobalt, but the toxicity does not arise from nanospecific effects-and importantly, the chemical composition of the ENM may dictate the oxidation state of the metal centers and thus limit ROS production.

Protein Fe-S Centers as a Molecular Target of Toxicity of a Complex Transition Metal Oxide Nanomaterial with Downstream Impacts on Metabolism and Growth.

Oxidative stress is frequently identified as a mechanism of toxicity of nanomaterials. However, rarely have the specific underlying molecular targets responsible for these impacts been identified. We previously demonstrated significant negative impacts of transition metal oxide (TMO) lithium-ion battery cathode nanomaterial, lithium cobalt oxide (LCO), on the growth, development, hemoglobin, and heme synthesis gene expression in the larvae of a model sediment invertebrate Chironomus riparius. Here, we propose that alteration of the Fe-S protein function by LCO is a molecular initiating event leading to these changes. A 10 mg/L LCO exposure causes significant oxidation of the aconitase 4Fe-4S center after 7 d as determined from the electron paramagnetic resonance spectroscopy measurements of intact larvae and a significant reduction in the aconitase activity of larval protein after 48 h (p < 0.05). Next-generation RNA sequencing identified significant changes in the expression of genes involved in 4Fe-4S center binding, Fe-S center synthesis, iron ion binding, and metabolism for 10 mg/L LCO at 48 h (FDR-adjusted, p < 0.1). We propose an adverse outcome pathway, where the oxidation of metabolic and regulatory Fe-S centers of proteins by LCO disrupts metabolic homeostasis, which negatively impacts the growth and development, a mechanism that may apply for these conserved proteins across species and for other TMO nanomaterials.

Quantitative Mapping of Oxidative Stress Response to Lithium Cobalt Oxide Nanoparticles in Single Cells Using Multiplexed in Situ Gene Expression Analysis.

Engineered nanoparticles (NPs) can negatively impact biological systems through induced generation of reactive oxygen species (ROS). Overproduced ROS cause biochemical damage and hence need to be effectively buffered by a sophisticated cellular oxidative stress response system. How this complex cellular system, which consists of multiple enzymes, responds to NP-induced ROS is largely unknown. Here, we apply a single cell analysis to quantitatively evaluate 10 key ROS responsive genes simultaneously to understand how the cell prioritizes tasks and reallocates resources in response to NP-induced oxidative stress. We focus on rainbow trout gill epithelial cells-a model cell type for environmental exposure-and their response to the massive generation of ROS induced by lithium cobalt oxide (LCO) NPs, which are extensively used as cathode materials in lithium ion batteries. Using multiplexed fluctuation localization imaging-based fluorescence in situ hybridization (fliFISH) in single cells, we found a shift in the expression of oxidative stress response genes with initial increase in genes targeting superoxide species, followed by increase in genes targeting peroxide and hydroxyl species. In contrast, Li+ and Co2+, at concentrations expected to be shed from the NPs, did not induce ROS generation but showed a potent inhibition of transcription for all 10 stress response genes. Taken together, our findings suggest a "two-hit" model for LCO NP toxicity, where the intact LCO NPs induce high levels of ROS that elicit sequential engagement of stress response genes, while the released metal ions suppress the expression of these genes. Consequently, these effects synergistically drive the exposed cells to become more vulnerable to ROS stress and damage.

Discovery and Elucidation of Counteranion Dependence in Photoredox Catalysis.

Over the past decade, there has been a renewed interest in the use of transition metal polypyridyl complexes as photoredox catalysts for a variety of innovative synthetic applications. Many derivatives of these complexes are known, and the effect of ligand modifications on their efficacy as photoredox catalysts has been the subject of extensive, systematic investigation. However, the influence of the photocatalyst counteranion has received little attention, despite the fact that these complexes are generally cationic in nature. Herein, we demonstrate that counteranion effects exert a surprising, dramatic impact on the rate of a representative photocatalytic radical cation Diels-Alder reaction. A detailed analysis reveals that counteranion identity impacts multiple aspects of the reaction mechanism. Most notably, photocatalysts with more noncoordinating counteranions yield a more powerful triplet excited state oxidant and longer radical cation chain length. It is proposed that this counteranion effect arises from Coulombic ion-pairing interactions between the counteranion and both the cationic photoredox catalyst and the radical cation intermediate, respectively. The comparatively slower rate of reaction with coordinating counteranions can be rescued by using hydrogen-bonding anion binders that attenuate deleterious ion-pairing interactions. These results demonstrate the importance of counteranion identity as a variable in the design and optimization of photoredox transformations and suggest a novel strategy for the optimization of organic reactions using this class of transition metal photocatalysts.

Molecular Surface Functionalization of Carbon Materials via Radical-Induced Grafting of Terminal Alkenes.

Formation of functional monolayers on surfaces of carbon materials is inherently difficult because of the high bond strength of carbon and because common pathways such as SN2 mechanisms cannot take place at surfaces of solid materials. Here, we show that the radical initiators can selectively abstract H atoms from H-terminated carbon surfaces, initiating regioselective grafting of terminal alkenes to surfaces of diamond, glassy carbon, and polymeric carbon dots. Nuclear magnetic resonance (NMR) and X-ray photoelectron spectroscopy (XPS) demonstrate formation of self-terminating organic monolayers linked via the terminal C atom of 1-alkenes. Density functional theory (DFT) calculations suggest that this selectivity is at least partially thermodynamic in origin, as significantly less energy is needed to abstract H atoms from carbon surfaces as compared to typical aliphatic compounds. The regioselectivity favoring binding to the terminal C atom of the reactant alkenes arises from steric hindrance encountered in bond formation at the adjacent carbon atom. Our results demonstrate that carbon surface radical chemistry yields a versatile, selective, and scalable approach to monolayer formation on H-terminated carbon surfaces and provide mechanistic insights into the surface selectivity and regioselectivity of molecular grafting.

Solution NMR Analysis of Ligand Environment in Quaternary Ammonium-Terminated Self-Assembled Monolayers on Gold Nanoparticles: The Effect of Surface Curvature and Ligand Structure.

We report a solution NMR-based analysis of (16-mercaptohexadecyl)trimethylammonium bromide (MTAB) self-assembled monolayers on colloidal gold nanospheres (AuNSs) with diameters from 1.2 to 25 nm and gold nanorods (AuNRs) with aspect ratios from 1.4 to 3.9. The chemical shift analysis of the proton signals from the solvent-exposed headgroups of bound ligands suggests that the headgroups are saturated on the ligand shell as the sizes of the nanoparticles increase beyond ∼10 nm. Quantitative NMR shows that the ligand density of MTAB-AuNSs is size-dependent. Ligand density ranges from ∼3 molecules per nm2 for 25 nm particles to up to 5-6 molecules per nm2 in ∼10 nm and smaller particles for in situ measurements of bound ligands; after I2/I- treatment to etch away the gold cores, ligand density ranges from ∼2 molecules per nm2 for 25 nm particles to up to 4-5 molecules per nm2 in ∼10 nm and smaller particles. T2 relaxation analysis shows greater hydrocarbon chain ordering and less headgroup motion as the diameter of the particles increases from 1.2 nm to ∼13 nm. Molecular dynamics simulations of 4, 6, and 8 nm (11-mercaptoundecyl)trimethylammonium bromide-capped AuNSs confirm greater hydrophobic chain packing order and saturation of charged headgroups within the same spherical ligand shell at larger nanoparticle sizes and higher ligand densities. Combining the NMR studies and MD simulations, we suggest that the headgroup packing limits the ligand density, rather than the sulfur packing on the nanoparticle surface, for ∼10 nm and larger particles. For MTAB-AuNRs, no chemical shift data nor ligand density data suggest that two populations of ligands that might correspond to side-ligands and end-ligands exist; yet T2 relaxation dynamics data suggest that headgroup mobility depends on aspect ratio and absolute nanoparticle dimensions.

Interaction of Phosphate with Lithium Cobalt Oxide Nanoparticles: A Combined Spectroscopic and Calorimetric Study.

Adsorption of small ions such as phosphates to the surfaces of metal oxides can significantly alter the behavior of these materials, especially when present in the nanoscale form. Lithium cobalt oxide is a good model system for understanding small-molecule interactions with emerging nanomaterials because of its widespread use in lithium ion batteries and its known activity as a water oxidation catalyst. Here, we present a thermodynamic analysis of phosphate adsorption to LiCoO2 and corroborate the results with additional in situ techniques, including zeta potential measurements and attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, at pH values relevant to potential environmental release scenarios. Flow microcalorimetry measurements of phosphate interaction with LiCoO2 at pH 7.4 show that there are two distinct exothermic processes taking place. Time-sequence in situ ATR-FTIR with two-dimensional correlation analysis reveals the spectroscopic signatures of these processes. We interpret the data as an interaction of phosphate with LiCoO2 that occurs through the release of two water molecules and is therefore, best described as a condensation process rather than a simple adsorption, consistent with prior studies, demonstrating that phosphate interaction with LiCoO2 is highly irreversible. Additional measurements for over longer times of 5 months show that phosphate adsorption terminates with one surface layer and that continued transformation over longer periods of time arises from H+/Li+ exchange and slow transformation to a cobalt hydroxide, with phosphate adsorbed to the surface only. To the best of our knowledge, this is the first time that flow microcalorimetry and two-dimensional correlation spectroscopy have been applied in tandem to clarify the specific chemical reactions that occur at the interface of solids and adsorbates.

Enhancing Electrochemical Efficiency of Hydroxyl Radical Formation on Diamond Electrodes by Functionalization with Hydrophobic Monolayers.

Electrochemical formation of high-energy species such as hydroxyl radicals in aqueous media is inefficient because oxidation of H2O to form O2 is a more thermodynamically favorable reaction. Boron-doped diamond (BDD) is widely used as an electrode material for generating •OH radicals because it has a very large kinetic overpotential for O2 production, thus increasing electrochemical efficiency for •OH production. Yet, the underlying mechanisms of O2 and •OH production at diamond electrodes are not well understood. We demonstrate that boron-doped diamond surfaces functionalized with hydrophobic, polyfluorinated molecular ligands (PF-BDD) have significantly higher electrochemical efficiency for •OH production compared with hydrogen-terminated (H-BDD), oxidized (O-BDD), or poly(ethylene ether)-functionalized (E-BDD) boron-doped diamond samples. Our measurements show that •OH production is nearly independent of surface functionalization and pH (pH = 7.4 vs 9.2), indicating that •OH is produced by oxidation of H2O in an outer-sphere electron-transfer process. In contrast, the total electrochemical current, which primarily produces O2, differs strongly between samples with different surface functionalizations, indicating an inner-sphere electron-transfer process. X-ray photoelectron spectroscopy measurements show that although both H-BDD and PF-BDD electrodes are oxidized over time, PF-BDD showed longer stability (≈24 h of use) than H-BDD. This work demonstrates that increasing surface hydrophobicity using perfluorinated ligands selectively inhibits inner-sphere oxidation to O2 and therefore provides a pathway to increased efficiency for formation of •OH via an outer-sphere process. The use of hydrophobic electrodes may be a general approach to increasing selectivity toward outer-sphere electron-transfer processes in aqueous media.

Next-Generation Complex Metal Oxide Nanomaterials Negatively Impact Growth and Development in the Benthic Invertebrate Chironomus riparius upon Settling.

Most studies of nanomaterial environmental impacts have focused on relatively simple first-generation nanomaterials, including metals or metal oxides (e.g., Ag, ZnO) for which dissolution largely accounts for toxicity. Few studies have considered nanomaterials with more complex compositions, such as complex metal oxides, which represent an emerging class of next-generation nanomaterials used in commercial products at large scales. Importantly, many nanomaterials are not colloidally stable in aqueous environments and will aggregate and settle, yet most studies use pelagic rather than benthic-dwelling organisms. Here we show that exposure of the model benthic species Chironomus riparius to lithium cobalt oxide (Li xCo1- xO2, LCO) and lithium nickel manganese cobalt oxide (Li xNi yMn zCo1- y- zO2, NMC) at 10 and 100 mg·L-1 caused 30-60% declines in larval growth and a delay of 7-25 d in adult emergence. A correlated 41-48% decline in larval hemoglobin concentration and related gene expression changes suggest a potential adverse outcome pathway. Metal ions released from nanoparticles do not cause equivalent impacts, indicating a nanospecific effect. Nanomaterials settled within 2 days and indicate higher cumulative exposures to sediment organisms than those in the water column, making this a potentially realistic environmental exposure. Differences in toxicity between NMC and LCO indicate compositional tuning may reduce material impact.

Chemically Derived Kirigami of WSe2.

Layered metal dichalcogenides have shown intriguing physical phenomena depending on their complex layer stackings and unique architectures. Here, we report novel microscale kirigami structures of multilayered WSe2 formed by a simple chemical vapor deposition and etching method. Scanning electron microscopy and atomic force microscopy reveal the unusual structure features of curved concave edges, panhandles, and sawtooth corners of these intricate multilayer architectures that result from etching. The structure-symmetry relationship and layer stackings of these WSe2 kirigami were elucidated by second-harmonic generation imaging and micro-Raman spectroscopy. We propose an etching model in which the etching behaviors of WSe2 multilayers are governed by the layer stacking of the bottom trilayer, which can successfully explain the formation process of WSe2 kirigami. This chemical etching approach could be applied to other metal dichalcogenide materials and open up new possibilities for creating novel and complex platforms for studying the rich physical properties in two-dimensional materials.

Quantification of Lipid Corona Formation on Colloidal Nanoparticles from Lipid Vesicles.

Formation of a protein corona around nanoparticles when immersed into biological fluids is well-known; less studied is the formation of lipid coronas around nanoparticles. In many cases, the identity of a nanoparticle-acquired corona determines nanoparticle fate within a biological system and its interactions with cells and organisms. This work systematically explores the impact of nanoparticle surface chemistry and lipid character on the formation of lipid coronas for 3 different nanoparticle surface chemistries (2 cationic, 1 anionic) on 14 nm gold nanoparticles exposed to a series of lipid vesicles of 4 different compositions. Qualitative (plasmon band shifting, ζ-potential analysis, dynamic light scattering on the part of the nanoparticles) and quantitative (lipid liquid chromatography/mass spectrometry) methods are developed with a "pull-down" scheme to assess the degree of lipid corona formation in these systems. In general, cationic nanoparticles extract 60-95% of the lipids available in vesicles under the described experimental conditions, while anionic nanoparticles extract almost none. While electrostatics apparently dominate the lipid-nanoparticle interactions, primary amine polymer surfaces extract more lipids than quaternary ammonium surfaces. Free cationic species can act as lipid-binding competitors in solution.

Optically Detected Magnetic Resonance for Selective Imaging of Diamond Nanoparticles.

While there is great interest in understanding the fate and transport of nanomaterials in the environment and in biological systems, the detection of nanomaterials in complex matrices by fluorescence methods is complicated by photodegradation, blinking, and the presence of natural organic material and other fluorescent background signals that hamper detection of fluorescent nanomaterials of interest. Optically detected magnetic resonance (ODMR) of nitrogen-vacancy (NV) centers in diamond nanoparticles provides a pathway toward background-free fluorescence measurements, as the application of a resonant microwave field can selectively modulate the intensity from NV centers in nanodiamonds of various diameters in complex materials systems using on-resonance and off-resonance microwave fields. This work represents the first investigation showing how nanoparticle diameter impacts the NV center lifetime and thereby directly impacts the accessible contrast and signal-to-noise ratio when using ODMR to achieve background-free imaging of NV-nanodiamonds in the presence of interfering fluorophores. These results provide new insights that will guide the choice of optimum nanoparticle size and methodology for background-free imaging and sensing applications, while also providing a model system to explore the fate and transport of nanomaterials in the environment.