RESUMO
Primary ciliary dyskinesia (PCD) is a genetically heterogeneous disease of motile cilia. Even though PCD is widely studied, North-African patients have been rarely explored. In this study, we aim at confirming the clinical diagnosis and explore the genetic spectrum of PCD in a cohort of Tunisian patients. Forty clinically diagnosed patients with PCD belonging to 34 families were recruited from Tunisian pediatric departments. In each proband, targeted capture PCD panel sequencing of the 40 PCD genes was performed. PCD panel sequencing identified bi-allelic mutations in 82% of the families in eight PCD genes. Remarkably, 23.5% of patients carried the same c.2190del CCDC39 mutation. Single nucleotide polymorphism profiling in six unrelated patients carrying this mutation has revealed a founder effect in North-African patients. This mutation is estimated to date back at least 1,400-1,750 years ago. The identification of this major allele allowed us to suggest a cost-effective genetic diagnostic strategy in North-African patients with PCD.
Assuntos
Dineínas/genética , Predisposição Genética para Doença , Síndrome de Kartagener/epidemiologia , Síndrome de Kartagener/genética , Mutação , Vigilância da População , Alelos , Substituição de Aminoácidos , Éxons , Feminino , Genótipo , Humanos , Síndrome de Kartagener/diagnóstico , Masculino , Tunísia/epidemiologiaRESUMO
Recovery of oil spilled on surface waters by the use of sorbents remains one of the primary oil spill response options available. To improve on this response measure, we have successfully fabricated an activated char (AC) sorbent material by pyrolysis of sewage sludge (SS), a readily available waste product generated across the world from wastewater treatment plants. The inherent Fe-minerals in SS texture were converted to magnetic Fe3O4 particles during the pyrolysis reaction. The AC provided a unique means to recover the sorbent after the oil sorption process with a magnetic field. Meanwhile, a superhydrophobic sorbent material with a water contact angle of 152.2° was created by the treatment of AC with myristic acid which could float on the water surface. Feasibility studies at the laboratory-scale were conducted with motor oil and light crude oil to evaluate its potential use in spill response operations. Results showed a sorption capacity of about 8.5 and 10.7â g/g for motor oil and light crude oil, respectively. Following the recovery of the test oils by ethanol stripping, the material could be recycled up to 5 times with trivial loss in sorption capacity. This research proposes a framework for the development of a highly efficient sorbent material for oil spill response operations from SS waste.
Assuntos
Poluição por Petróleo , Petróleo , Esgotos , Óleos , Petróleo/análise , Água/química , Interações Hidrofóbicas e HidrofílicasRESUMO
The development of visible-light active photocatalysts is a current challenge especially energy and environmental-related fields. Herein, methylammonium lead iodide perovskite (MAIPb) was chosen as the novel semiconductor material for its ability of absorbing visible-light. An easily reproducible and efficient method was employed to synthesize the as-mentioned material. The sample was characterized by various techniques and has been used as visible-light photocatalyst for degradation of two model pollutants: rhodamine B (RhB) and methylene-blue (MB). The photo-degradation of RhB was found to achieve about 65% after 180 min of treatment. Moreover, the efficiency was enhanced to 100% by assisting the process with a small amount of H2O2. The visible-light activity of the photocatalyst was attributed to its ability to absorb light as well as to enhance separation of photogenerated carriers. The main outcome of the present work is the investigation of a hybrid perovskite as photocatalyst for wastewater treatment.
RESUMO
The work focus to enhance the properties of xanthan gum (XG) by anchoring metal ions (Fe, Zr) and encapsulating inorganic matrix (M@XG-ZA). The fabricated nanocomposite was characterized by Transmission Electron Microscopy (TEM), Scanning Electron Microscopy (SEM), Energy-dispersive X-ray spectroscopy (EDX), Fourier Transform Infrared Spectroscopy (FTIR), surface area (BET) and zeta potential analysis. The adsorption of Sc, Nd, Tm and Yb was investigated after screening of synthesized materials in detail to understand the influence of pH, contact time, temperature and initial REE (rare earth element) concentration both in single and multicomponent system via batch adsorption. The adsorption mechanism was verified by FTIR, SEM and elemental mapping. The SEM images of Zr@XG-ZA demonstrate scutes structure, which disappeared after adsorption of REEs. The maximum adsorption capacities were 132.30, 14.01, 18.15 and 25.73â¯mg/g for Sc, Nd, Tm and Yb, respectively. The adsorption efficiency over Zr@XG-ZA in multicomponent system was higher than single system and the REEs followed the order: Scâ¯>â¯Ybâ¯>â¯Tmâ¯>â¯Nd. The Zr@XG-ZA demonstrate good adsorption behavior for REEs up to five cycles and then it can be used as photocatalyst for the degradation of tetracycline. Thus, the work adds a new insight to design and preparation of efficient bifunctional adsorbents from sustainable materials for water purification.
RESUMO
Silica-chitosan hybrid beads were synthesized via three different methods to investigate the selective recovery of REE from AMD. The influence of amino/non-amino silanes, high molecular weight/high viscous chitosan and N-/O- based ligands were studied and their effects on REE removal efficiencies were analyzed. The adsorption efficiencies of three various groups of modified beads were inspected with respect to feed pH, in a single and a multi-component system, and their affinities towards the light and heavy rare earth elements (LREE/ HREEs) were interpreted to understand the intra-series REE separation behavior. The focus of the study was mainly directed towards utilizing these fabricated beads for the recovery of valuable REEs from the real AMD obtained at three different sampling depths which was found rich in iron, sulfur and aluminum. Moreover, the selectivity of the beads towards REEs improved with silanized and ligand immobilized gels and their impacts on REE recovery in the presence of competing ions were successfully presented in this paper. Also, the synthesized beads showed rapid REE adsorption and recovery within a process time of 5â¯min. Group II adsorbents, synthesized by forming silica-chitosan hybrid beads followed by PAN/acac modifications, showed superiority over the other groups of adsorbents.
RESUMO
Peroxisome-proliferator-activated-receptor-gamma (PPAR-γ) is implicated, in some capacity, in the pathogenesis of pulmonary arterial hypertension (PAH). Rosiglitazone, an oral antidiabetic and PPAR-γ agonist, has the potential to dilate pulmonary arteries and to attenuate arterial remodeling in PAH. Here, we sought to test the hypothesis that rosiglitazone can be repurposed as inhaled formulation for the treatment of PAH. We have tested this conjecture by preparing and optimizing poly(lactic-co-glycolic) acid (PLGA) based particles of rosiglitazone, assessing the drug particles for pulmonary absorption, investigating the efficacy of the plain versus particulate drug formulation in improving the respiratory hemodynamics in PAH animals, and finally studying the effect of the drug in regulating the molecular markers associated with PAH pathogenesis. The optimized particles were slightly porous and spherical, and released 87.9%⯱â¯6.7% of the drug in 24â¯h. The elimination half-life of the drug formulated in PLGA particles was 2.5-fold greater than that of the plain drug administered via the same route at the same dose. The optimized formulation, given via the pulmonary route, produced pulmonary selective vasodilation in PAH animals, but oral rosiglitazone had no effect in pulmonary hemodynamics. Rosiglitazone ameliorates the pathogenesis of PAH by balancing the molecular regulators involved in the vasoconstriction and vasodilation of human pulmonary arterial smooth muscle cells. All in all, data generated using intact animal and cellular models point to the conclusion that PLGA particles of an antidiabetic drug can be used for the treatment of a different disease, PAH.
Assuntos
Reposicionamento de Medicamentos/métodos , Hipertensão Pulmonar Primária Familiar/tratamento farmacológico , Hipoglicemiantes/farmacologia , PPAR gama/agonistas , Rosiglitazona/farmacologia , Administração por Inalação , Animais , Portadores de Fármacos/química , Composição de Medicamentos/métodos , Liberação Controlada de Fármacos , Humanos , Hipoglicemiantes/administração & dosagem , Hipoglicemiantes/efeitos adversos , Hipoglicemiantes/uso terapêutico , Masculino , Modelos Animais , Músculo Liso Vascular/efeitos dos fármacos , Miócitos de Músculo Liso , Copolímero de Ácido Poliláctico e Ácido Poliglicólico/química , Porosidade , Artéria Pulmonar/efeitos dos fármacos , Ratos Sprague-Dawley , Rosiglitazona/administração & dosagem , Rosiglitazona/efeitos adversos , Rosiglitazona/uso terapêutico , Resultado do TratamentoRESUMO
Iron-alginate beads (Fe-ABs) were successfully prepared by the ion-gelation method, and applied as heterogeneous Fenton catalysts for the removal of a malodorous compound 'indole'. Similarly, copper-enriched alginate beads (Cu-ABs) were synthesized and tested as like-Fenton catalyst, however, their application proved not to be effective for this purpose. Fe-ABs catalysts were characterized by FTIR, SEM, EDS and AAS spectroscopy. Results pointed out that the parameters affecting Fenton catalysis must be carefully chosen to avoid excessive iron release. Under optimal conditions, complete indole removal and considerably high reduction of TOC, without significant leaching was achieved. Indole decay followed a pseudo-first-order kinetics. The absolute rate constant for indole hydroxylation was 3.59×10(9) M(-1) s(-1), as determined by the competition kinetics method. Four reaction intermediates (Isatin, Dioxindole, Oxindole and Anthralinic acid) were identified by ULC/MS/MS analysis. Short-chain aliphatic carboxylic acids like formic, acetic, oxalic, maleic, oxamic and pyruvic acids were identified by ion exclusion chromatography and as end-products. Based on the identified by-products, a plausible mineralization pathway was proposed. Moreover, the catalyst was recovered quantitatively by simple filtration and reused for several times without significant loss of activity.
Assuntos
Alginatos/química , Indóis/química , Ferro/química , Poluentes Químicos da Água/química , Adsorção , Ácidos Carboxílicos/química , Catálise , Ácido Glucurônico/química , Ácidos Hexurônicos/química , Peróxido de Hidrogênio/química , Odorantes , Oxirredução , Eliminação de Resíduos Líquidos/métodos , Purificação da Água/métodos , ortoaminobenzoatos/químicaRESUMO
A novel magnetic heterogeneous catalyst has been developed by incorporation of iron(II) and magnetic functionalized nanoparticles Fe3O4 in alginate beads with the aim of using them in the advanced Fenton oxidation of a malodorous compound (3 methyl-indole: 3-MI). The effects of significant operational parameters such as initial pH, oxidant concentration and catalyst amount were investigated and optimized for a better removal of 3-MI at initial concentration of 20mgL(-1). Besides, the catalyst stability was evaluated according to the iron leached into the aqueous solution. Results revealed that the parameters affecting Fenton catalysis must be carefully chosen to avoid excessive iron release. Under optimized conditions, the magnetic catalyst exhibited a good catalytic performance. Total removal of 3 methyl indole and a remarkable organic mineralization, without significant leaching of iron, were attained within 120min at pH 3.0 by using 0.4gL(-1) of Fe-MABs and 9.8mmolL(-1) of H2O2. The novel magnetic catalyst would be of potential application due to its high efficiency, easy recovery and good structural stability.