Synergistic Modulating Interlayer Space and Electron-Transfer of Covalent Organic Frameworks for Oxygen Reduction Reaction.

Covalent organic frameworks (COFs) are an ideal template to construct high-efficiency catalysts for oxygen reduction reaction (ORR) due to their predictable properties. However, the closely parallel-stacking manner and lacking intramolecular electron transfer ability of COFs limit atomic utilization efficiency and intrinsic activity. Herein, COFs are constructed with large interlayer distances and enhanced electronic transfer ability by side-chain functionalization. Long chains with electron-donating features not only enlarge interlayer distance, but also narrow the bandgap. The resulting DPPS-COF displays higher electrochemical surface areas to provide more exposed active sites, despite <1/10 surface areas. DPPS-COF exhibits excellent electrocatalytic ORR activity with half-wave potential of 0.85 V, which is 30 and 60 mV positive than those of Pt/C and DPP-COF, and is the record among the reported COFs. DPPS-COF is employed as cathode electrocatalyst for zinc-air battery with a maximum power density of 185.2 mW cm-2, which is superior to Pt/C. Theoretical calculation further reveals that longer electronic-donating chains not only facilitate the formation of intermediate OOH* from O2, but also promote intermediates desorption , and thus leading to higher activity.

Distributed Li-Ion Flux Enabled by Sulfonated Covalent Organic Frameworks for High-Performance Lithium Metal Anodes.

Metallic Li is considered the most promising anode material for high-energy-density batteries owing to its high theoretical capacity and low electrochemical potential. However, inhomogeneous lithium deposition and uncontrollable growth of lithium dendrites result in low lithium utilization, rapid capacity fading, and poor cycling performance. Herein, two sulfonated covalent organic frameworks (COFs) with different sulfonated group contents are synthesized as the multifunctional interlayers in lithium metal batteries. The sulfonic acid groups in the pore channels can serve as Li-anchoring sites that effectively coordinate Li ions. These periodically arranged subunits significantly guide uniform Li-ion flux distribution, guarantee smooth Li deposition, and reduce lithium dendrite formation. Consequently, these characteristics afford an excellent quasi-solid-state electrolyte with a high ionic conductivity of 1.9 × 10-3  S  cm-1 at room temperature and a superior Li++ transference number of 0.91. A Li/LiFePO4 battery with the COF-based electrolyte exhibited dendrite-free Li deposition during the charge process, accompanied by no capacity decay after 100 cycles at 0.1 C.

Olefin-Linked Covalent Organic Frameworks with Electronegative Channels as Cationic Highways for Sustainable Lithium Metal Battery Anodes.

Despite the enormous interest in Li metal as an ideal anode material, the uncontrollable Li dendrite growth and unstable solid electrolyte interphase have plagued its practical application. These limitations can be attributed to the sluggish and uneven Li+ migration towards Li metal surface. Here, we report olefin-linked covalent organic frameworks (COFs) with electronegative channels for facilitating selective Li+ transport. The triazine rings and fluorinated groups of the COFs are introduced as electron-rich sites capable of enhancing salt dissociation and guiding uniform Li+ flux within the channels, resulting in a high Li+ transference number (0.85) and high ionic conductivity (1.78 mS cm-1 ). The COFs are mixed with a polymeric binder to form mixed matrix membranes. These membranes enable reliable Li plating/stripping cyclability over 700 h in Li/Li symmetric cells and stable capacity retention in Li/LiFePO4 cells, demonstrating its potential as a viable cationic highway for accelerating Li+ conduction.

Constructing Stable and Porous Covalent Organic Frameworks for Efficient Iodine Vapor Capture.

Covalent organic frameworks (COF) with periodic porous structures and tunable functionalities are a new class of crystalline polymers connected via strong covalent bonds. Constructing COF materials with high stability and porosity is attracting and essential for COFs' further functional exploration. In this work, two new covalent organic frameworks (TTA-TMTA-COF and TTA-FMTA-COF) with high surface area, large pore volume, and excellent chemical stability toward harsh conditions are designed and synthesized by integrating the methoxy functional groups into the networks. Both two COFs are further employed for iodine removal since radioactive iodine in nuclear waste has seriously threatened the natural environment and human health. TTA-TMTA-COF and TTA-FMTA-COF can capture 3.21 and 5.07 g g-1 iodine, respectively. Notably, the iodine capture capacity for iodine of TTA-FMTA-COF does not show any decline after being recycled five times. These results demonstrate both COFs possess ultrahigh capacity and excellent recyclability.

Recent Progress in Design Principles of Covalent Organic Frameworks for Rechargeable Metal-Ion Batteries.

Covalent organic frameworks (COFs) are acknowledged as a new generation of crystalline organic materials and have garnered tremendous attention owing to their unique advantages of structural tunability, frameworks diversity, functional versatility, and diverse applications in drug delivery, adsorption/separation, catalysis, optoelectronics, and sensing, etc. Recently, COFs is proven to be promising candidates for electrochemical energy storage materials. Their chemical compositions and structures can be precisely tuned and functionalized at the molecular level, allowing a comprehensive understanding of COFs that helps to make full use of their features and addresses the inherent drawback based on the components and functions of the devices. In this review, the working mechanisms and the distinguishing advantages of COFs as electrodes for rechargeable Li-ion batteries are discussed in detail. Especially, principles and strategies for the rational design of COFs as advanced electrode materials in Li-ion batteries are systematically summarized. Finally, this review is structured to cover recent explorations and applications of COF electrode materials in other rechargeable metal-ion batteries.

Engineering the interface of organic/inorganic composite solid-state electrolyte by amino effect for all-solid-state lithium batteries.

Composite solid-state electrolyte (CSSE) with integrated strengths avoids the weaknesses of organic and inorganic electrolytes, and thus become a better choice for all-solid-state lithium battery (ASSLB). However, the poor dispersion of inorganic fillers and the organic/inorganic nature difference leads to their interface incompatibility, which greatly destroys the performance of CSSE and ASSLB. Herein, silane coupling agent (SCA) aminopropyl triethoxysilane (ATS) is introduced to tailor the organic/inorganic interfaces in CSSE by the common chemical bridging effect of SCA and the special amino effect (hydrogen bond and lone pair electron effects). It is found that the hydrogen bond interaction between -NH2 and polyethylene oxide (PEO) enhances their interface interaction. And the lone pair electrons on nitrogen atom allow it to react with solvent acetonitrile and promote the uniform dispersion of ceramic fillers. Moreover, the lone pair electrons can complex with Li+, which promotes the dissociation of Li salts, uniforms Li+ diffusion and inhibits the Li dendrite. Thanks to the above merits, the interface compatibility and stability of organic/inorganic CSSE are much enhanced by innovatively introducing ATS, showing high ionic conductivity and superior mechanical/thermal stability. The ASSLB with this modified CSSE exhibits excellent electrochemical performance with a reversible capacity of 140.9 mAh g-1 and a capacity retention of 94.4% after 280 cycles. These achievements offer a new insight into improving the stability of organic/inorganic CSSE interface and promoting their applicability into ASSLB.

Co-N heteroatomic interface engineering in peanut Shell-Derived porous carbon for enhanced oxygen reduction reaction.

The development of high-efficiency and low-cost oxygen reduction electrocatalysts have become an urgent need to push fuel cells into practical application. Herein, an effective electrocatalyst Co/NC was successfully constructed, which was derived from abundant peanut shells, obtained by doping with cobalt ions and pyrolyzing in NH3 atmosphere. Due to the abundant Co-N active sites triggered by Co-N heteroatomic interface, the prepared electrocatalysts present excellent oxygen reduction reaction (ORR) performance with more positive half-wave potential (E1/2 = 0.83 V), incremental limiting current density (JL = 5.45 mA cm-2), higher durability and stronger resistance to methanol, which is superior to that of Pt/C (E1/2 = 0.81 V and JL = 5.19 mA cm-2). This work proposes a potential strategy to synthesize efficient ORR electrocatalysts to instead of Pt-based catalysts.

Homogeneous and Fast Li-Ion Transport Enabled by a Novel Metal-Organic-Framework-Based Succinonitrile Electrolyte for Dendrite-Free Li Deposition.

Lithium (Li) metal has emerged as a promising electrode material for high-energy-density batteries. However, serious Li dendrite issues during cycling have plagued the safety and cyclability of the batteries, thus limiting the practical application of Li metal batteries. Herein, we prepare a novel metal-organic-framework-based (MOF-based) succinonitrile electrolyte, which enables homogeneous and fast Li-ion (Li+) transport for dendrite-free Li deposition. Given the appropriate aperture size of the MOF skeleton, the targeted electrolyte can allow only small-size Li+ to pass through its pores, which effectively guides uniform Li+ transport. Specially, Li ions are coordinated by the C═N of the MOF framework and the C≡N of succinonitrile, which could accelerate Li+ migration jointly. These characteristics afford an excellent quasi-solid-state electrolyte with a high ionic conductivity of 7.04 × 10-4 S cm-1 at room temperature and a superior Li+ transference number of 0.68. The Li/LiFePO4 battery with the MOF-based succinonitrile electrolyte exhibits dendrite-free Li deposition during the charge process, accompanied by a high capacity retention of 98.9% after 100 cycles at 0.1C.

Metal-Organic-Framework-Based Gel Polymer Electrolyte with Immobilized Anions To Stabilize a Lithium Anode for a Quasi-Solid-State Lithium-Sulfur Battery.

A lithium-sulfur (Li-S) battery is widely regarded as one of the most promising technologies for energy storage because of its high theoretical energy density and cost advantage. However, the shuttling of soluble polysulfides between the cathode and the anode and the consequent lithium anode degradation strongly limit the safety and electrochemical performance in the Li-S battery. Herein, a metal-organic-framework (MOF)-modified gel polymer electrolyte (GPE) is employed in a Li-S battery in order to stablize the lithium anode. In view of the abundant pores in the MOF skeleton, the as-prepared GPE not only immobilizes the large-size polysulfide anions but also cages electrolyte anions into the pores, thus facilitating a uniform flux of Li ions and homogeneous Li deposition. Cooperated with a sulfur-carbon composite cathode, the lithium with MOF-modified GPE exhibits a uniform surface morphology and dense solid electrolyte interphase (SEI) film, thus delivering good cycle stability and high-rate capability.