Cortical ensembles orchestrate social competition through hypothalamic outputs.

Most social species self-organize into dominance hierarchies1,2, which decreases aggression and conserves energy3,4, but it is not clear how individuals know their social rank. We have only begun to learn how the brain represents social rank5-9 and guides behaviour on the basis of this representation. The medial prefrontal cortex (mPFC) is involved in social dominance in rodents7,8 and humans10,11. Yet, precisely how the mPFC encodes relative social rank and which circuits mediate this computation is not known. We developed a social competition assay in which mice compete for rewards, as well as a computer vision tool (AlphaTracker) to track multiple, unmarked animals. A hidden Markov model combined with generalized linear models was able to decode social competition behaviour from mPFC ensemble activity. Population dynamics in the mPFC predicted social rank and competitive success. Finally, we demonstrate that mPFC cells that project to the lateral hypothalamus promote dominance behaviour during reward competition. Thus, we reveal a cortico-hypothalamic circuit by which the mPFC exerts top-down modulation of social dominance.

Bosea beijingensis sp. nov., Telluria beijingensis sp. nov. and Agrococcus beijingensis sp. nov., isolated from baijiu mash.

The baijiu fermentation environment hosts a variety of micro-organisms, some of which still remain uncultured and uncharacterized. In this study, the isolation, cultivation and characterization of three novel aerobic bacterial strains are described. The cells of strain REN20T were Gram-negative, strictly aerobic, motile and grew at 26-37 °C, at pH 6.0-9.0 and in the presence of 0-5.0   % (w/v) NaCl. The cells of strain REN29T were Gram-negative, strictly aerobic, motile and grew at 15-30 °C, at pH 6.0-9.0 and in the presence of 0-10.0   % (w/v) NaCl. The cells of strain REN33T were Gram-positive, strictly aerobic, motile and grew at 15-37 °C, at pH 5.0-10.0 and in the presence of 0-7.0   % (w/v) NaCl. The digital DNA-DNA hybridization and average nucleotide identity by orthology values between type strains in related genera and REN20T (20.3-36.8 % and 79.8-89.9  %), REN29T (20.3-36.8  % and 74.5-88.5  %) and REN33T (22.6-48.6  % and 75.8-84.2  %) were below the standard cut-off criteria for the delineation of bacterial species, respectively. Based on polyphasic taxonomy analysis, we propose three new species, Bosea beijingensis sp. nov. (=REN20T=GDMCC 1.2894T=JCM 35118T), Telluria beijingensis sp. nov. (=REN29T=GDMCC 1.2896T=JCM 35119T) and Agrococcus beijingensis sp. nov. (=REN33T=GDMCC 1.2898T=JCM 35164T), which were recovered during cultivation and isolation from baijiu mash.

Robust wrinkled MoS2/N-C bifunctional electrocatalysts interfaced with single Fe atoms for wearable zinc-air batteries.

The ability to create highly efficient and stable bifunctional electrocatalysts, capable of oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in the same electrolyte, represents an important endeavor toward high-performance zinc-air batteries (ZABs). Herein, we report a facile strategy for crafting wrinkled MoS2/N-doped carbon core/shell nanospheres interfaced with single Fe atoms (denoted MoS2@Fe-N-C) as superior ORR/OER bifunctional electrocatalysts for robust wearable ZABs with a high capacity and outstanding cycling stability. Specifically, the highly crumpled MoS2 nanosphere core is wrapped with a layer of single-Fe-atom-impregnated, N-doped carbon shell (i.e., Fe-N-C shell with well-dispersed FeN4 sites). Intriguingly, MoS2@Fe-N-C nanospheres manifest an ORR half-wave potential of 0.84 V and an OER overpotential of 360 mV at 10 mA⋅cm-2 More importantly, density functional theory calculations reveal the lowered energy barriers for both ORR and OER, accounting for marked enhanced catalytic performance of MoS2@Fe-N-C nanospheres. Remarkably, wearable ZABs assembled by capitalizing on MoS2@Fe-N-C nanospheres as an air electrode with an ultralow area loading (i.e., 0.25 mg⋅cm-2) display excellent stability against deformation, high special capacity (i.e., 442 mAh⋅g-1Zn), excellent power density (i.e., 78 mW⋅cm-2) and attractive cycling stability (e.g., 50 cycles at current density of 5 mA⋅cm-2). This study provides a platform to rationally design single-atom-interfaced core/shell bifunctional electrocatalysts for efficient metal-air batteries.

Deoxynivalenol and T-2 toxin cause liver damage and egg quality degradation through endoplasmic reticulum stress in summer laying hens.

The present study aimed to find whether low doses of mixed mycotoxins would affect egg quality in laying hens, and to explore the oxidative stress induced liver damage through endoplasmic reticulum during summer stress. A total of 96 Jinghong laying hens, 36 wks of age, were divided into four treatments, with eight repetitions per treatment and three hens per repetition. All the hens were raised in summer (average temperature: 31.3 ± 0.5℃; average humidity: 85.5 ± 0.2%) for 28d. One treatment was fed a basal diet as control (CON), and the other three treatments were fed the same diets containing 3.0 mg/kg deoxynivalenol (DON), 0.5 mg/kg T-2 toxin (T-2), and 1.5 mg/kg DON + 0.25 mg/kg T-2 toxin (Mix). Albumen height and Haugh unit were decreased (P < 0.05) in the Mix group on day 14 and 28. The activity of total antioxidant capacity, glutathione peroxidase, catalase, and superoxide dismutase were decreased (P < 0.05) in the DON, T-2, and Mix groups. The alkaline phosphatase level in DON, T-2, and Mix groups was significantly increased (P < 0.05). The level of interleukin-1ß, interferon-γ, and tumor necrosis factor-α in the Mix group were higher (P < 0.05) than CON, DON, and T-2 groups. Mix group upregulated the mRNA expressions of protein kinase RNA-like ER kinase, activating transcription factor4, IL-1ß, nuclear factor-κ-gene binding, and nuclear respiratory factor 2 in the liver (P < 0.05). The results showed that low doses of DON and T-2 toxin could cause oxidative stress in the liver, but DON and T-2 toxin have a cumulative effect on virulence, which can reduce egg quality and cause endoplasmic reticulum stress in the liver.

[A new cucurbitane glycoside from Picrorhiza scrophulariiflora].

Chemical constituents from the ethanol extract of Picrorhiza scrophulariiflora were isolated and purified by column chromatography. Their structures were identified by HR-MS, 1D and 2D-NMR, and their cytotoxicity was assessed by CCK-8 assay. Four compounds were isolated and identified as follows: 2ß-D-glucosyloxy-3ß,16α,20ß-trihydroxy-9-methyl-19-norlanosterol-5,25-diene-22-one(1), 2ß-D-glucosyloxy-3ß,16α,20ß-trihydroxy-9-methyl-19-norlanosta-5,24-diene-22-one(2), 25-acetoxy-2ß-glucosyloxy-3ß,16α,20ß-trihydroxy-9-methyl-19-norlanosta-5-ene-22-one(3) and 25-acetoxy-2ß-glucosyloxy-3ß,16α,20ß-trihydroxy-9-methyl-19-norlanosta-5,23-(E)-diene-22-one(4). Compound 1 represents a new cucurbitane glycoside. The half inhibitory concentrations of the 4 compounds exceeded 100 µmol·L~(-1) against four tumor cell lines, indicating no significant cytotoxicity.

Electrocatalytic Biomass Upgrading of Furfural using Transition-Metal Borides via Density Functional Theory Investigation.

Electrocatalytic biomass upgrading has proven to be an effective technique for generating value-added products. Herein, the design and development of furfural upgrading using transition-metal borides (MBenes) with simultaneous production of hydrogen are presented. Using density functional theory, the stabilities, selectivities, and activities of 13 MBene candidates are systematically evaluated for furfural upgrading. This research suggests that Fe2 B2 can serve as a promising electrocatalyst for the formation of furoic acid (FAC), with a limiting potential of -0.15 V, and 5-hydroxy-2(5H)-furanone (HFO), with a limiting potential of -0.93 V. Furthermore, Fe2 B2 and Mn2 Fe2 are shown to exhibit favorable limiting potentials of -1.35 and -1.36 V, respectively, for producing 6-hydroxy-2.3-dihydro-6H-pyrano-3-one (HDPO), indicating that they may also serve as electrocatalysts. Based on Sabatier's principle, a descriptor (φ) of material properties is developed for screening catalysts with high catalytic activity considering the electronegativities and d-electron number of metals. Additionally, surface redox potential, electronic properties, and charge-density differences are determined for Fe2 B2 , which is estimated to exhibit high catalytic activity for the oxidation of furfural to FAC and HFO.

The inhibition of Aurora A kinase regulates phospholipid remodeling by upregulating LPCAT1 in glioblastoma.

Metabolic reprogramming is a common feature of glioblastoma (GBM) progression and metastasis. Altered lipid metabolism is one of the most prominent metabolic alterations in cancer. Understanding the links between phospholipid remodeling and GBM tumorigenesis may help develop new anticancer strategies and improve treatments to overcome drug resistance. We used metabolomic and transcriptomic analyses to systematically investigate metabolic and molecular changes in low-grade glioma (LGG) and GBM. We then re-established the reprogrammed metabolic flux and membrane lipid composition in GBM based on metabolomic and transcriptomic analyses. By inhibiting Aurora A kinase via RNA interference (RNAi) and inhibitor treatment, we investigated the effect of Aurora A kinase on phospholipid reprogramming LPCAT1 enzyme expression and GBM cell proliferation in vitro and in vivo. We found that GBM displayed aberrant glycerophospholipid and glycerolipid metabolism compared with LGG. Metabolic profiling indicated that fatty acid synthesis and uptake for phospholipid synthesis were significantly increased in GBM compared to LGG. The unsaturated phosphatidylcholine (PC) and phosphatidylethanolamine (PE) levels were significantly decreased in GBM compared to LGG. The expression level of LPCAT1, which is required for the synthesis of saturated PC and PE, was upregulated in GBM, and the expression of LPCAT4, which is required for the synthesis of unsaturated PC and PE, was downregulated in GBM. Notably, the inhibition of Aurora A kinase by shRNA knockdown and treatment with Aurora A kinase inhibitors such as Alisertib, AMG900, or AT9283 upregulated LPCAT1 mRNA and protein expression in vitro. In vivo, the inhibition of Aurora A kinase with Alisertib increased LPCAT1 protein expression. Phospholipid remodeling and a reduction in unsaturated membrane lipid components were found in GBM. Aurora A kinase inhibition increased LPCAT1 expression and suppressed GBM cell proliferation. The combination of Aurora kinase inhibition with LPCAT1 inhibition may exert promising synergistic effects on GBM.

Effects of Sevoflurane and Propofol on Neurological Recovery of Traumatic Brain Injury Patients in the Early Postoperative Stage: A Retrospective Cohort Study.

Objective To investigate the effects of propofol and sevoflurane on neurological recovery of traumatic brain injury (TBI) patients in the early postoperative stage.Methods We retrospectively analyzed the clinical data of TBI patients who underwent craniotomy or decompressive craniectomy. Generalized additive mixed model (GAMM) was used to analyze effects of propofol and sevoflurane on Glasgow Coma Scale (GCS) on postoperative days 1, 3, and 7. Multivariate regression analysis was used to analyze effects of the two anesthetics on Glasgow Outcome Scale (GOS) at discharge.Results A total of 340 TBI patients were enrolled in this study. There were 110 TBI patients who underwent craniotomy including 75 in the propofol group and 35 in the sevoflurane group, and 134 patients who underwent decompressive craniectomy including 63 in the propofol group and 71 in the sevoflurane group. It showed no significant difference in GCS at admission between the propofol and the sevoflurane groups among craniotomy patients (ß = 0.75, 95%CI: -0.55 to 2.05, P = 0.260). However, elevation in GCS from baseline was 1.73 points (95%CI: -2.81 to -0.66, P = 0.002) less in the sevoflurane group than that in the propofol group on postoperative day 1, 2.03 points (95%CI: -3.14 to -0.91, P < 0.001) less on day 3, and 1.31 points (95%CI: -2.43 to -0.19, P = 0.022) less on day 7. The risk of unfavorable GOS (GOS 1, 2, and 3) at discharge was higher in the sevoflurane group (OR = 4.93, 95%CI: 1.05 to 23.03, P = 0.043). No significant difference was observed among two-group decompressive craniectomy patients in GCS and GOS.Conclusions Compared to propofol, sevoflurane was associated with worse neurological recovery during the hospital stay in TBI patients undergoing craniotomy. This difference was not detected in TBI patients undergoing decompressive craniectomy.

[Methodology and application of process analytical technology (PAT) for traditional Chinese medicine manufacturing:a review].

Owing to the advancement in pharmaceutical technology, traditional Chinese medicine industry has seen rapid development. Preferring conventional manufacturing mode, pharmaceutical enterprises of traditional Chinese medicine have no effective process detection tools and process control methods. As a result, the quality of the final products mainly depends on testing and the quality is inconsistent in the same batch. Process analytical technology(PAT) for traditional Chinese medicine manufacturing, as one of the key advanced manufacturing techniques, can break through the bottleneck in quality control of medicine manufacturing, thus improving the production efficiency and product quality and reducing the material and energy consumption. It is applicable to the process control and real-time release of advanced manufacturing modes such as intelligent manufacturing and continuous manufacturing. This paper summarized the general idea of PAT for traditional Chinese medicine manufacturing. Through the analysis of the characteristics and status quo of the technology, we summed up the methodology for the continuous application and improvement of PAT during the whole life-cycle of traditional Chinese medicine. The five key procedures(process understanding, process detection, process modeling, process control, and continuous improvement) were summarized, and the application was reviewed. Finally, we proposed suggestions for the technical and regulatory challenges in implementing PAT in traditional Chinese medicine industry. This paper aims to provide a reference for development and application of PAT in advanced manufacturing, intelligent manufacturing, and continuous manufacturing of traditional Chinese medicine industry.

[Application progress on data-driven technologies in intelligent manufacturing of traditional Chinese medicine extraction].

The application of new-generation information technologies such as big data, the internet of things(IoT), and cloud computing in the traditional Chinese medicine(TCM)manufacturing industry is gradually deepening, driving the intelligent transformation and upgrading of the TCM industry. At the current stage, there are challenges in understanding the extraction process and its mechanisms in TCM. Online detection technology faces difficulties in making breakthroughs, and data throughout the entire production process is scattered, lacking valuable mining and utilization, which significantly hinders the intelligent upgrading of the TCM industry. Applying data-driven technologies in the process of TCM extraction can enhance the understanding of the extraction process, achieve precise control, and effectively improve the quality of TCM products. This article analyzed the technological bottlenecks in the production process of TCM extraction, summarized commonly used data-driven algorithms in the research and production control of extraction processes, and reviewed the progress in the application of data-driven technologies in the following five aspects: mechanism analysis of the extraction process, process development and optimization, online detection, process control, and production management. This article is expected to provide references for optimizing the extraction process and intelligent production of TCM.

Influencing Factors on Li-ion Conductivity and Interfacial Stability of Solid Polymer Electrolytes, Exampled by Polycarbonates, Polyoxalates and Polymalonates.

The application of solid polymer electrolytes (SPEs) in all-solid-state(ASS) batteries is hindered by lower Li+ -conductivity and narrower electrochemical window. Here, three families of ester-based F-modified SPEs of poly-carbonate (PCE), poly-oxalate (POE) and poly-malonate (PME) were investigated. The Li+ -conductivity of these SPEs prepared from pentanediol are all higher than the counterparts made of butanediol, owing to the enhanced asymmetry and flexibility. Because of stronger chelating coordination with Li+ , the Li+ -conductivity of PME and POE is around 10 and 5 times of PCE. The trifluoroacetyl-units are observed more effective than -O-CH2 -CF2 -CF2 -CH2 -O- during the in situ passivation of Li-metal. Using trifluoroacetyl terminated POE and PCE as SPE, the interfaces with Li-metal and high-voltage-cathode are stabilized simultaneously, endowing stable cycling of ASS Li/LiNi0.6 Co0.2 Mn0.2 O2 (NCM622) cells. Owing to an enol isomerization of malonate, the cycling stability of Li/PME/NCM622 is deteriorated, which is recovered with the introduce of dimethyl-group in malonate and the suppression of enol isomerization. The coordinating capability with Li+ , molecular asymmetry and existing modes of elemental F, are all critical for the molecular design of SPEs.

Efficiencies of Various in situ Polymerizations of Liquid Electrolytes and the Practical Implications for Quasi Solid-state Batteries.

In situ polymerization of liquid electrolytes is currently the most feasible way for constructing solid-state batteries, which, however, is affected by various interfering factors of reactions and so the electrochemical performance of cells. To disclose the effects from polymerization conditions, two types of generally used in situ polymerizing reactions of ring-opening polymerization (ROP) and double bond radical polymerization (DBRP) were investigated on the aspects of monomer conversion and electrochemical properties (Li+ -conductivity and interfacial stability). The ROP generated poly-ester and poly-carbonate show a high monomer conversion of ≈90 %, but suffer a poor Li+ -conductivity of lower than 2×10-5  S cm-1 at room temperature (RT). Additionally, the terminal alkoxy anion derived from the ROP is not resistant to high-voltage cathodes. While, the DBRP produced poly-VEC(vinyl ethylene carbonate) and poly-VC(vinylene carbonate) show lower monomer conversions of 50-80 %, delivering relatively higher Li+ -conductivities of 2×10-4  S cm-1 at RT. Compared two polymerizing reactions and four monomers, the VEC-based F-containing copolymer possesses advantages in Li+ -conductivity and antioxidant capacity, which also shows simultaneous stability towards Li-metal with the help of LiF-based passivating layer, allowing a long-term stable cycling of high-voltage quasi solid-state cells.

Lithium-Conducting Branched Polymers: New Paradigm of Solid-State Electrolytes for Batteries.

The past decades have witnessed rapid development of lithium-based batteries. Significant research efforts have been progressively diverted from electrodes to electrolytes, particularly polymer electrolytes (PEs), to tackle the safety concern and promote the energy storage capability of batteries. To further increase the ionic conductivity of PEs, various branched polymers (BPs) have been rationally designed and synthesized. Compared with linear polymers, branched architectures effectively increase polymer segmental mobility, restrain crystallization, and reduce chain entanglement, thereby rendering BPs with greatly enhanced lithium transport. In this Mini Review, a diversity of BPs for PEs is summarized by scrutinizing their unique topologies and properties. Subsequently, the design principles for enhancing the physical properties, mechanical properties, and electrochemical performance of BP-based PEs (BP-PEs) are provided in which the ionic conduction is particularly examined in light of the Li+ transport mechanism. Finally, the challenges and future prospects of BP-PEs in this rapidly evolving field are outlined.

[Research on batch-to-batch quality control of compound Danshen extract based on physical characterization and multivariate statistical analysis].

Physical attributes of Chinese herbal extracts are determined by their chemical components, and the physical and chemical attributes jointly affect the preparation process performance and the final product quality. Therefore, in order to improve the quality control of Chinese herbal extracts, we should comprehensively study the batch-to-batch consistency of physical and chemical attributes as well as the correlations between them. This paper first explored the physical attributes affecting the preparation process performance of the compound Danshen extract and developed a method for characterizing the texture attributes. With such main chemical components as water, phenolic acids, saponins, and saccharides and texture, rheology, and other physical attributes taken into consideration, the batch-to-batch quality fluctuation of products from different production lines and time was analyzed by principal components analysis(PCA). Finally, the correlation and partial least squares(PLS) analysis was conducted, and the regression equation was established. The fitting result of the PLS model for dynamic viscosity was satisfying(R~2Y=0.857, Q~2=0.793), suggesting that the chemical components could be adjusted by the component transfer rate in the extraction process, the impurity removal rate in the alcohol precipitation process, and the water retention rate of the concentration process to meet the control of the extract dynamic viscosity. This study clarified the correlations between physical and chemical attributes of the compound Danshen extract and established a method for controlling its physical attributes based on process regulation, which would provide reference for improving the quality control of Chinese herbal extracts.

[Granulation of Yangxue Qingnao Granules in fluidized bed based on near-infrared spectroscopy].

To realize the real-time monitoring of the production process of Yangxue Qingnao Granules and improve the inter-batch consistency of granule quality in the granulation process, this study established a near-infrared quantitative prediction model of moisture, particle size, bulk density, and angle of repose in the fluidized bed granulation process of Yangxue Qingnao Granules based on near-infrared spectroscopy(NIRS). The near-infrared spectra were collected from 355 samples in 12 batches in the granulation process by integrating the sphere detection module of the near-infrared spectrometer. In combination with the pretreatment methods such as the first derivative, multiplicative scatter correction(MSC), and standard normal variate(SNV), the model was established by partial least squares(PLS) regression. The root mean square error of prediction(RMSEP) of moisture was 0.347 and R_P~2 was 0.935. The RMSEP of the D_(50) particle size model was 38.4 and R_P~2 was 0.980. The RMSEPs of bulk density and angle of repose were 0.018 8 and 0.879, with R_P~2 of 0.085 9 and 0.958. The results showed that the prediction of the PLS quantitative model combined with NIRS was accurate, and this model can be applied to the monitoring of key quality attributes in the fluidized bed granulation of Chinese medicinal granules in the production scale.

Thermally Depolymerizable Polyether Electrolytes for Convenient and Low-Cost Recycling of LiTFSI.

Solid polymer electrolytes (SPEs) with LiTFSI (lithium bis(trifluoromethane sulfonimide)) are promising candidates for solid-state batteries, owing to their good interfacial contact with solid electrodes. Here, three copolymerized polyethers were prepared as SPEs, using the catalysts of SnF2 or SnF2 -LiPF6 . The thermal depolymerization of these polyethers was observed at elevated temperatures, which limits their operating temperature ranges. Once the catalyst is removed, the thermal degradation temperatures of these SPEs are raised by 30-55 °C, together with improved thermal performance in cells. For SPEs, the high price of LiTFSI is an obstacle for their large-scale application, and it's recycling is hindered by the strong interaction with polymers. By the thermal depolymerization of polyethers, LiTFSI can be easier reclaimed from above mentioned SPEs and even the commercial PEO(poly(ethylene-oxide)) based SPE in rates of 70-80 %, providing a low-cost strategy for the recycling of LiTFSI.

Synthesis and bioevaluation of N-(3,4,5-trimethoxyphenyl)-1H-pyrazolo[3,4-b]pyridin-3-amines as tubulin polymerization inhibitors with anti-angiogenic effects.

A new series of N-(3,4,5-trimethoxyphenyl)-1H-pyrazolo[3,4-b]pyridin-3-amine derivatives as tubulin polymerization inhibitors were synthesized, and evaluated for the anti-proliferative activities. A structure-activity relationship study revealed that the free amino moiety of 1H-pyrazolo[3,4-b]pyridin-3-amine played an essential role in the anti-proliferative activities. Especially, compound 15c displayed the strongest anti-proliferation against MCF-7 cells with IC50 value of 0.067 ± 0.003 µM, and high selectivity over the normal human embryonic lung WI-38 cells with IC50 value of 23.41 ± 1.53 µM. Further mechanistic studies revealed that 15c showed strong anti-tubulin polymerization activity, changed the morphology of tubulin, and arrested the cell cycle at the G2/M transition in MCF-7 cells. Molecular docking analysis suggested that 15c well occupied the colchicine-binding pocket of tubulin. Additionally, 15c demonstrated anti-angiogenic activities with blocking the migration, invasion and tube formation, disrupting the newly formed tube, and regulating both MMP-9 and TIMP-1 in HUVEC cells. In summary, our results highlight that compound 15c is a potential antitumor compound that are worthy of further development.

Design, synthesis and evaluation of tetrahydrocarbazole derivatives as potential hypoglycemic agents.

Two series of tetrahydrocarbazole derivatives have been designed and synthesized based on ZG02, a promising candidate developed in our previous studies. The newly prepared compounds were screened for glucose consumption activity in HepG2 cell lines. Aza-tetrahydrocarbazole compound 12b showed the most potent hypoglycemic activity with a 45% increase in glucose consumption when compared to the solvent control, which had approximately 1.2-fold higher activity than the positive control compounds (metformin and ZG02). An investigation of the potential mechanism indicated that 12b may exhibit hypoglycemic activity via activation of the AMPK pathway. Metabolic stability assays revealed that 12b showed good stability profiles in both artificial gastrointestinal fluids and blood plasma from SD rats. An oral glucose tolerance test (OGTT) was performed and the results further confirmed that 12b was a potent hypoglycemic agent.

The clinicoradiological features and surgical outcomes of primary intracranial fibrosarcoma: a single-institute experience with a systematic review.

Primary intracranial fibrosarcoma (PIF) was a rare tumor with a high relapse rate and dismal survival rate. This study aimed to delineate the clinical characteristics of primary intracranial fibrosarcoma (PIF) and the risk factors for outcomes. We reviewed 15 PIF patients, who underwent surgical treatment at our institution from January 2009 to December 2018. Meanwhile, 36 cases from the prior literature between November 1962 and December 2019 were also retrieved and pooled to identify the risk factors. In our cohort, while cystic component (46.7%), perilesional edema (83.3%), and vascular flow void (66.7%) were commonly observed, no patient was accurately diagnosed. The 2-year relapse-free survival (RFS) and overall survival (OS) were 12.2% and 30.2%, respectively. Based on the pooled data, tumor size (p = 0.006), Ki-67 index (p = 0.004), and radiotherapy dose (p = 0.029) were prognostic factors for RFS in univariate analysis. In the univariate analysis, tumor size (p = 0.002), NGTR (p = 0.049), and high Ki-67 index (p = 0.019) were significant predictors for OS; and further multivariate analysis (n = 18) showed that large tumor size (≥ 5 cm; HR 14.613, p = 0.022) and high Ki-67 index (≥ 30%; HR 5.879, p = 0.020) were the independent risk factors for OS. Due to the rarity and nonspecific clinicoradiological features, the correct diagnosis of PIF before surgery was challenging. The outcomes of PIF were poor, and GTR plus radiotherapy (at least 60 Gy) might benefit to the outcomes and were recommended. Future study with a large cohort was needed to verify our findings.

[Research on feedforward control method of mixing process for compound Danshen Dripping Pills based on quality by design(QbD)].

The mixing process is one of the key operation units for solid preparation of traditional Chinese medicine. The physical properties such as particle size, density and viscosity of the mixture are key factors that need to be controlled, which will directly affect the performance of the preparation molding process and product quality. Subsequent dripping process performance and appearance qua-lity of dripping pills will be affected by dynamic viscosity of materials in the mixing process. Based on this, with mixing process of compound Danshen dripping pills as the object, a feedforward control method for the dripping pill mixing process was established based on the concept of quality by design(QbD). Firstly, critical quality attribute(CQA)-dynamic viscosity, critical material attributes(CMAs)-the moisture content of compound Danshen extract, average molecular weight of polyethylene glycol 6000 and critical process parameter(CPP)-mixing temperature were identified through the analysis of properties for multiple batches of the raw materials and excipients as well as technological mechanism. Then the Box-Behnken experimental design was used to establish the regression model among CMA, CPP and CMA(R■=0.972 0, RMSE =16.24) to obtain the design space. Finally, through the verification of three batches within the design space, the mixing process temperature was adjusted according to the properties of the raw materials and exci-pients to achieve accurate control of the dynamic viscosity attribute. The relative deviation between the actual dynamic viscosity value and the target value was less than 3.0 %. The feedforward control of the mixing process of compound Danshen dripping pills was rea-lized in this study, which can contribute to improving quality consistency of the mixing process intermediates, simultaneously provide a reference for the research on the process quality control of other Chinese medicine dripping pills.