RESUMO
Microresonators coupled with integrated waveguides operate stably but usually lack tunability for an optimal coupling state. In this Letter, we demonstrate a racetrack resonator with an electrically modulated coupling on an X-cut lithium niobate (LN) platform by introducing a Mach-Zehnder interferometer (MZI) with two balanced directional couplers (DCs) to realize light exchange. This device provides a wide-range coupling regulation, from under-coupling and critical coupling to deep over-coupling. Importantly, it has a fixed resonance frequency when the DC splitting ratio is 3â dB. The measured optical responses of the resonator exhibit a high extinction ratio, exceeding 23â dB, and an effective half-wave voltage length Vπ·L of 0.77â V·cm, suitable for CMOS compatibility. Microresonators with tunable coupling and a stable resonance frequency are expected to find application in nonlinear optical devices on LN-integrated optical platforms.
RESUMO
Lithium niobate (LN) thin film has recently emerged as an important platform for nonlinear optical investigations for its large χ(2) nonlinear coefficients and ability of light localization. In this Letter, we report the first, to the best of our knowledge, fabrication of LN-on-insulator ridge waveguides with generalized quasiperiodic poled superlattices using the electric field polarization technique and microfabrication techniques. Benefiting from the abundant reciprocal vectors, we observed efficient second-harmonic and cascaded third-harmonic signals in the same device, with normalized conversion efficiency of 1735% W-1 cm-2 and 0.41% W-2 cm-4, respectively. This work opens a new direction for nonlinear integrated photonics based on LN thin film.
RESUMO
Erbium-ion-doped lithium niobate (LN) microcavity lasers working in the communication band have attracted extensive attention recently. However, their conversion efficiencies and laser thresholds still have significant room to improve. Here, we prepared microdisk cavities based on erbium-ytterbium-co-doped LN thin film by using ultraviolet lithography, argon ion etching, and a chemical-mechanical polishing process. Benefiting from the erbium-ytterbium co-doping-induced gain coefficient improvement, laser emission with an ultralow threshold (â¼1 µW) and high conversion efficiency (1.8 × 10-3%) was observed in the fabricated microdisks under a 980-nm-band optical pump. This study provides an effective reference for improving the performance of LN thin-film lasers.
Assuntos
Érbio , Itérbio , Óxidos , ImpressãoRESUMO
Periodically poled lithium niobate (PPLN) structures on a chip enable efficient second-order nonlinear optical effects, benefiting from the tight light confinement and the utilization of d33. Here, we report a broadband second-harmonic (SH) generation in a step-chirped PPLN waveguide on X-cut lithium niobate on insulator (LNOI). The high fidelity of the poling period is demonstrated over the whole length of 7â mm using a non-destructive technique of piezoresponse force microscopy. The SH signal was continuously observed in the step-chirped PPLN waveguides while scanning the wavelength of the pump laser from 1550â nm to 1660â nm. The SH conversion efficiency was measured to be 9.6â % W-1 cm-2 at 1642â nm. This work will benefit wavelength conversions of light sources with wideband spectra.
RESUMO
Integrated and stable microlasers are indispensable building blocks of micro-photonics. Here, we report the realization of an ytterbium-doped lithium niobate microring laser operating in the 1060-nm band under the pump of a 980-nm-band laser. The monolithic laser has a low threshold of 59.32 µW and relatively high output power of 6.44 µW, a state-of-the-art value for rare-earth ions-doped lithium niobate thin-film lasers. The monolithic laser with desirable performance and attractive scalability may find many applications in lithium niobite photonics.
RESUMO
Integrated optical systems based on lithium niobate on insulator (LNOI) have attracted the interest of researchers. Recently, erbium-doped LNOI lasers have been realized. However, the reported lasers have a relatively lower conversion efficiency and only operate in the 1550â nm band. In this paper, we demonstrate an LNOI laser operating in the 1060â nm band based on a high Q factor ytterbium-doped LNOI microdisk cavity. The threshold and the conversion efficiency of the laser are 21.19â µW and 1.36%, respectively. To our knowledge, the conversion efficiency is the highest among the reported rare-earth-doped LNOI lasers. This research extends the operating band of LNOI lasers and shows the potential in realizing high-power LNOI lasers.
RESUMO
Lithium niobate on insulator (LNOI), regarded as an important candidate platform for optical integration due to its excellent nonlinear, electro-optic, and other physical properties, has become a research hotspot. A light source, as an essential component for an integrated optical system, is urgently needed. In this Letter, we reported the realization of 1550 nm band on-chip LNOI microlasers based on erbium-doped LNOI ring cavities with loaded quality factors higher than 1 million at â¼970nm, which were fabricated by using electron beam lithography and inductively coupled plasma reactive ion etching processes. These microlasers demonstrated a low pump threshold of â¼20µW and stable performance under the pump of a 980 nm band continuous laser. Comb-like laser spectra spanning from 1510 to 1580 nm were observed in a high pump power regime, which lays the foundation of the realization of pulsed laser and frequency combs on a rare-earth ion-doped LNOI platform. This Letter effectively promotes the development of on-chip integrated active LNOI devices.
RESUMO
High-efficiency chirped grating couplers (GCs) with coupling efficiencies (CE) approaching 90%/coupler were designed by using a particle swarm optimization algorithm. These GCs were fabricated on $z$-cut lithium niobate on insulator (LNOI) with an Au layer on the lithium niobate substrate. The maximum CEs for transverse electric and transverse magnetic polarization input were measured up to ${\sim}{72.0}\%$/coupler and ${\sim}{61.6}\%$/coupler, respectively, which are the state-of-the-art values for LNOI GCs as far as we know. These GCs contribute to the realization of high-efficiency LNOI on-chip integrated optics.
RESUMO
Periodically poled lithium niobate (PPLN) microcavities with additional reciprocal vectors attract attention as a platform for efficient parametric nonlinear optical processes with wavelength and polarization flexibility. Here, we report the simultaneous realization of multiple coupled parametric processes in PPLN microdisk cavities with dual periods as a result of the significantly increased number of reciprocal vectors to fulfill quasi-phase matchings for a series of nonlinear processes. PPLN microdisks with up to 1.43×105 quality factors and unit domain size of 90 nm in width were fabricated using CMOS compatible microfabrication techniques and electrically poled with the help of piezoresponse force microscopy. The conversion efficiency of second-harmonic signal was measured to be 51%W-1. Our work paves the way towards efficient cascaded parametric effects including third- and fourth-harmonic generations.
RESUMO
We reveal a unique broadband natural quasi-phase-matching (QPM) mechanism underlying an observation of highly efficient second- and third-order harmonic generation at multiple wavelengths in an x-cut lithium niobate (LN) microdisk resonator. For light waves in the transverse-electric mode propagating along the circumference of the microdisk, the effective nonlinear optical coefficients naturally oscillate periodically to change both the sign and magnitude, facilitating QPM without the necessity of domain engineering in the micrometer-scale LN disk. The second-harmonic and cascaded third-harmonic waves are simultaneously generated with normalized conversion efficiencies as high as 9.9%/mW and 1.05%/mW^{2}, respectively, thanks to the utilization of the highest nonlinear coefficient d_{33} of LN. The high efficiency achieved with the microdisk of a diameter of â¼30 µm is beneficial for realizing high-density integration of nonlinear photonic devices such as wavelength convertors and entangled photon sources.
RESUMO
We study free-space coupling of optical fields to the whispering-gallery-mode resonators by employing self-accelerating beams orbiting a semicircle. The best coupling condition is obtained through theoretical analysis, in accord with the numerical results. Comparing with the conventional Gaussian-like beams, much enhanced coupling efficiency is achieved with such self-accelerating beams, particularly when a large numerical aperture of an optical system is used or a higher-order azimuthal mode is considered. Conditions with slight deviation from the ideal radius of self-accelerating beams are further discussed, aiming to realize an optimized high coupling efficiency.
RESUMO
We report the experimental observation and theoretical analysis of thermo-optic effects in high-Q on-chip lithium-niobate (LN) microdisks. We find that the resonance transmission dip of a LN microdisk was broadened or compressed when the wavelength of the input laser was tuned to the shorter or the longer wavelengths at a wavelength sweeping speed of 4.8 pm/s. When the laser wavelength was shifted with a fast rate (4.8 nm/s), the tendencies of the change in the shape of the transmission dip reverse completely. An oscillatory behavior in the transmission spectra was also observed when the laser wavelength was slowly shifted to the shorter wavelengths. The experimental results were successfully explained by using a theoretical mode considering for a fast thermo-optic effect of LN crystal and a slow heat dissipation process from the LN microdisk to the substrate and surroundings that leads to the reduction of the resonance wavelength through the deformation of the LN microdisk.