RESUMO
Smart interfaces that are responsive to external triggers such as light are of great interest for the development of responsive or adaptive materials and interfaces. Using alkyl-arylazopyrazole butyl sulfonate surfactants (alkyl-AAP) that can undergo E/Z photoisomerization when irradiated with green (E) and UV (Z) lights, we demonstrate through a combination of experiments and computer simulations that there can be surprisingly large changes in surface tension and in the molecular structure and order at air-water interfaces. Surface tensiometry, vibrational sum-frequency generation (SFG) spectroscopy, and neutron reflectometry (NR) are applied to the study of custom-synthesized AAP surfactants with octyl- and H-terminal groups at air-water interfaces as a function of their bulk concentration and E/Z configuration. Upon photoswitching, a drastic influence of the alkyl chain on both the surface activity and the responsiveness of interfacial surfactants is revealed from changes in the surface tension, γ, where the largest changes in γ are observed for octyl-AAP (Δγ â¼ 23 mN/m) in contrast to H-AAP with Δγ < 10 mN/m. Results from vibrational SFG spectroscopy and NR show that the interfacial composition and the molecular order of the surfactants drastically change with E/Z photoisomerization and surface coverage. Indeed, from analysis of the S-O (head group) and C-H vibrational bands (hydrophobic tail), a qualitative analysis of orientational and structural changes of interfacial AAP surfactants is provided. The experiments are complemented by resolution of thermodynamic parameters such as equilibrium constants from ultra-coarse-grained simulations, which also capture details like island formation and interaction parameters of interfacial molecules. Here, the interparticle interaction ("stickiness") and the interaction with the surface are adjusted, closely reflecting experimental conditions.
RESUMO
Germany has been considered free of terrestrial rabies since 2008 as a result of intensive vaccination and surveillance efforts but reservoirs of the lyssaviruses EBLV1 and EBLV2 persist in bat colonies and thus pose a potential risk of infection. We report on a patient who suffered a bat bite in an urban setting in which European bat lyssavirus 1 (EBLV-1) was detected in the euthanized bat. We performed active and passive postexposure prophylaxis (PEP). This case study illustrates the ongoing risk of rabies infection due to close bat contacts in Germany and is intended to sensitize primary care physicians to take such exposure events seriously and to perform a regular PEP including administration of rabies immunoglobulin.
Assuntos
Mordeduras e Picadas , Quirópteros , Lyssavirus , Profilaxia Pós-Exposição , Raiva , Quirópteros/virologia , Humanos , Animais , Lyssavirus/imunologia , Mordeduras e Picadas/virologia , Raiva/prevenção & controle , Raiva/transmissão , Infecções por Rhabdoviridae/prevenção & controle , Infecções por Rhabdoviridae/transmissão , Infecções por Rhabdoviridae/virologia , Masculino , Alemanha , Vacina Antirrábica/administração & dosagemRESUMO
In many applications of polyelectrolyte/surfactant (P/S) mixtures, it is difficult to fine-tune them after mixing the components without changing the sample composition, e.g. pH or the ionic strength. Here we report on a new approach where we use photoswitchable surfactants to enable drastic changes in both the bulk and interfacial properties. Poly(diallyldimethylammonium chloride) (PDADMAC) mixtures with three alkyl-arylazopyrazole butyl sulfonates (CnAAP) with -H, -butyl and -octyl tails are applied and E/Z photoisomerization of the surfactants is used to cause substantially different hydrophobic interactions between the surfactants and PDADMAC. These remotely controlled changes affect significantly the P/S binding and allows for tuning both the bulk and interfacial properties of PDADMAC/CnAAP mixtures through light irradiation. For that, we have fixed the surfactant concentrations at values where they exhibit pronounced surface tension changes upon E/Z photoisomerization with 365 nm UV light (Z) and 520 nm green (E) light and have varied the PDADMAC concentration. The electrophoretic mobility can be largely tuned by photoisomerisation of CnAAP surfactants and P/S aggregates, which can even exhibit a charge reversal from negative to positive values or vice versa. In addition, low colloidal stability at equimolar concentrations of PDADMAC with CnAAP surfactants in the E configuration lead to the formation of large aggregates in the bulk which can be broken up by irradiation with UV light when the surfactant's alkyl chain is short enough (C0AAP). Vibrational sum-frequency generation (SFG) spectroscopy reveals changes at the interface similar to the bulk, where the charging state at air-water interfaces can be modified with light irradiation. Using SFG spectroscopy, we interrogated the O-H stretching modes of interfacial H2O and provide qualitative information on surface charging that is complemented by neutron reflectometry, from which we resolved the surface excesses of PDADMAC and CnAAP at the air-water interface, independently.
RESUMO
Polyelectrolyte/surfactant (P/S) mixtures find many applications but are static in nature and cannot be reversibly reconfigured through the application of external stimuli. Using a new type of photoswitchable surfactants, we use light to trigger property changes in mixtures of an anionic polyelectrolyte with a cationic photoswitch such as electrophoretic mobilities, particle size, as well as their interfacial structure and their ability to stabilize aqueous foam. For that, we show that prevailing hydrophobic intermolecular interactions can be remotely controlled between poly(sodium styrene sulfonate) (PSS) and arylazopyrazole tetraethylammonium bromide (AAP-TB). Shifting the chemical potential for P/S binding with E/Z photoisomerization of the surfactants can reversibly disintegrate even large aggregates (>4 µm) and is accompanied by a substantial change in the net charging state of PSS/AAP-TB complexes, e.g., from negative to positive excess charges upon light irradiation. In addition to the drastic changes in the bulk solution, also at air-water interfaces, the interfacial stoichiometry and structure change drastically on the molecular level with E/Z photoisomerization, which can also drive the stability of aqueous foam on a macroscopic level.
RESUMO
Hydroxypropyl cellulose (HPC) and arylazopyrazole (AAP) mixtures can be remotely controlled by light and temperature. We show that the hydrophobic interactions between HPC polymers with AAP surfactants can be drastically changed by changing the surfactants configuration through E/Z photo-isomerization. E-AAP interacts strongly with HPC which causes a dramatic increase of the critical temperature Tc of the polymers' phase transition and a loss of the coil-to-globule transition, while the hydrophobic interactions of HPC with Z-AAP are drastically reduced. As a result, E/Z photo-isomerization of AAP in mixtures with HPC offers remote control of the polymers phase transition, size and solution viscosity in an unprecedented way, and allows for new directions in colloid science.
RESUMO
Alopecia-contractures-dwarfism mental retardation syndrome (ACD syndrome; OMIM 203550) is a very rare genetic disorder with distinct features. To our knowledge, there have been four cases documented to date. In addition, another three patients, previously described as having IFAP syndrome (OMIM %308205), may also have ACD syndrome. We report on one patient with short stature, total alopecia, ichthyosis, photophobia, seizures, ectrodactyly, vertebral anomalies, scoliosis, multiple contractures, mental retardation, and striking facial and other features (e.g. microdolichocephaly, missing eyebrows and eyelashes, long nose, large ears) consistent with ACD syndrome. Results of laboratory testing in the literature case reports were normal, although in none of them, array-CGH (microarray-based comparative genomic hybridization) analysis was performed. In conclusion, the combination of specific features, including total alopecia, ichthyosis, mental retardation, and skeletal anomalies are suggestive of ACD syndrome. We propose that children with this syndrome undergo a certain social pediatric protocol including EEG diagnostics, ophthalmological investigation, psychological testing, management of dermatologic and orthopedic problems, and genetic counseling.
Assuntos
Alopecia/complicações , Nanismo/complicações , Deficiência Intelectual/complicações , Microcefalia/complicações , Fenótipo , Alopecia/genética , Alopecia/fisiopatologia , Nanismo/genética , Nanismo/fisiopatologia , Feminino , Humanos , Deficiência Intelectual/genética , Masculino , Microcefalia/genética , Microcefalia/fisiopatologia , SíndromeRESUMO
Aristaless-like homeobox 4 (ALX4) gene is an important transcription regulator in skull and limb development. In humans and mice ALX4 mutations or loss of function result in a number of skeletal and organ malformations, including polydactyly, tibial hemimelia, omphalocele, biparietal foramina, impaired mammary epithelial morphogenesis, alopecia, coronal craniosynostosis, hypertelorism, depressed nasal bridge and ridge, bifid nasal tip, hypogonadism, and body agenesis. Here we show that a complex skeletal malformation of the hind limb in Galloway cattle together with other developmental anomalies is a recessive autosomal disorder most likely caused by a duplication of 20 bp in exon 2 of the bovine ALX4 gene. A second duplication of 34 bp in exon 4 of the same gene has no known effect, although both duplications result in a frameshift and premature stop codon leading to a truncated protein. Genotyping of 1,688 Black/Red/Belted/Riggit Galloway (GA) and 289 White Galloway (WGA) cattle showed that the duplication in exon 2 has allele frequencies of 1% in GA and 6% in WGA and the duplication in exon 4 has frequencies of 23% in GA and 38% in WGA. Both duplications were not detected in 876 randomly selected German Holstein Friesian and 86 cattle of 21 other breeds. Hence, we have identified a candidate causative mutation for tibial hemimelia syndrome in Galloway cattle and selection against this mutation can be used to eliminate the mutant allele from the breed.
Assuntos
Doenças dos Bovinos/genética , Proteínas de Ligação a DNA/genética , Ectromelia/veterinária , Éxons , Duplicação Gênica , Mutação , Tíbia/anormalidades , Fatores de Transcrição/genética , Sequência de Aminoácidos , Animais , Sequência de Bases , Bovinos , Doenças dos Bovinos/diagnóstico , Proteínas de Ligação a DNA/química , Genótipo , Dados de Sequência Molecular , Linhagem , Polimorfismo Genético , Alinhamento de Sequência , Síndrome , Fatores de Transcrição/químicaRESUMO
Several methods for the detection of tissues of the central nervous system (CNS) in meat products have been developed and partly validated for use in official food control as pertaining to human BSE-exposure risk. So far, however, methods for the detection of abnormal prion protein (PrPSc) were not evaluated for their potential applicability to the matrix of heat treated meat products. We developed a micro technological procedure for the preparation of meat products suitable for high security laboratories as masses were 6 to 8 orders of magnitude lower than in conventional meat technology. Thus it was possible to produce standard micro sausages containing defined amounts of bovine BSE-positive brain. This material showed all characteristics of normal meat products and a homogeneous distribution of brain as indicated by NSE and GFAP western immunoblotting and GFAP immunometric analyses. Using a commercially available and certified immunometric assay for detection of PrPSc in untreated brain it was possible to detect BSE-positive CNS down to a content of 0.25% in heat treated meat products. We found a high correlation between PrPSc OD-values and CNS content and linearity up to 10% CNS. In 30 samples of retail meat products no sample transgressed the official cut off value for untreated bovine brain. Further studies are needed to show whether an increase of sensitivity in PrPSc detection from the meat product matrix is possible, in particular by optimisation of the extraction procedure.