Nuclear Magnetic Resonance Spectroscopy: A Multifaceted Toolbox to Probe Structure, Dynamics, Interactions, and Real-Time In Situ Release Kinetics in Peptide-Liposome Formulations.

Liposomal formulations represent attractive biocompatible and tunable drug delivery systems for peptide drugs. Among the tools to analyze their physicochemical properties, nuclear magnetic resonance (NMR) spectroscopy, despite being an obligatory technique to characterize molecular structure and dynamics in chemistry as well as in structural biology, yet appears to be rather sparsely used to study drug-liposome formulations. In this work, we exploited several facets of liquid-state NMR spectroscopy to characterize liposomal delivery systems for the apelin-derived K14P peptide and K14P modified by Nα-fatty acylation. Various liposome compositions and preparation modes were analyzed. Using NMR, in combination with cryo-electron microscopy and dynamic light scattering, we determined structural, dynamic, and self-association properties of these peptides in solution and probed their interactions with liposomes. Using 31P and 1H NMR, we characterized membrane fluidity and thermotropic phase transitions in empty and loaded liposomes. Based on diffusion and 1H NMR experiments, we localized and quantified peptides with respect to the interior/exterior of liposomes and changes over time and upon thermal treatments. Finally, we assessed the release kinetics of several solutes and compared various formulations. Taken together, this work shows that NMR has the potential to assist the design of peptide/liposome systems and more generally drug delivery systems.

Worldwide acceleration of mountain erosion under a cooling climate.

Climate influences the erosion processes acting at the Earth's surface. However, the effect of cooling during the Late Cenozoic era, including the onset of Pliocene-Pleistocene Northern Hemisphere glaciation (about two to three million years ago), on global erosion rates remains unclear. The uncertainty arises mainly from a lack of consensus on the use of the sedimentary record as a proxy for erosion and the difficulty of isolating the respective contributions of tectonics and climate to erosion. Here we compile 18,000 bedrock thermochronometric ages from around the world and use a formal inversion procedure to estimate temporal and spatial variations in erosion rates. This allows for the quantification of erosion for the source areas that ultimately produce the sediment record on a timescale of millions of years. We find that mountain erosion rates have increased since about six million years ago and most rapidly since two million years ago. The increase of erosion rates is observed at all latitudes, but is most pronounced in glaciated mountain ranges, indicating that glacial processes played an important part. Because mountains represent a considerable fraction of the global production of sediments, our results imply an increase in sediment flux at a global scale that coincides closely with enhanced cooling during the Pliocene and Pleistocene epochs.

Arsenic Speciation in Mekong Delta Sediments Depends on Their Depositional Environment.

Arsenic contamination in groundwater is pervasive throughout deltaic regions of Southeast Asia and threatens the health of millions. The speciation of As in sediments overlying contaminated aquifers is poorly constrained. Here, we investigate the chemical and mineralogical compositions of sediment cores collected from the Mekong Delta in Vietnam, elucidate the speciation of iron and arsenic, and relate them to the sediment depositional environment. Gradual dissolution of ferric (oxyhydr)oxides with depth is observed down to 7 m, corresponding to the establishment of reducing conditions. Within the reduced sediment, layers originating from marine, coastal or alluvial depositional environments are identified and their age is consistent with a late Holocene transgression in the Mekong Delta. In the organic matter- and sulfur-rich layers, arsenic is present in association with organic matter through thiol-bonding and in the form of arsenian pyrite. The highest arsenic concentration (34-69 ppm) is found in the peat layer at 16 m and suggests the accumulation of arsenic due to the formation of thiol-bound trivalent arsenic (40-55%) and arsenian pyrite (15-30%) in a paleo-mangrove depositional environment (∼8079 yr BP). Where sulfur is limited, siderite is identified, and oxygen- and thiol-bound trivalent arsenic are the predominant forms. It is also worth noting that pentavalent arsenic coordinated to oxygen is ubiquitous in the sediment profile, even in reduced sediment layers. But the identity of the oxygen-bound arsenic species remains unknown. This work shows direct evidence of thiol-bound trivalent arsenic in the Mekong Delta sediments and provides insight to refine the current model of the origin, deposition, and release of arsenic in the alluvial aquifers of the Mekong Delta.

New Insights in Thrombin Inhibition Structure-Activity Relationships by Characterization of Octadecasaccharides from Low Molecular Weight Heparin.

Low Molecular Weight Heparins (LMWH) are complex anticoagulant drugs that mainly inhibit the blood coagulation cascade through indirect interaction with antithrombin. While inhibition of the factor Xa is well described, little is known about the polysaccharide structure inhibiting thrombin. In fact, a minimal chain length of 18 saccharides units, including an antithrombin (AT) binding pentasaccharide, is mandatory to form the active ternary complex for LMWH obtained by alkaline ß-elimination (e.g., enoxaparin). However, the relationship between structure of octadecasaccharides and their thrombin inhibition has not been yet assessed on natural compounds due to technical hurdles to isolate sufficiently pure material. We report the preparation of five octadecasaccharides by using orthogonal separation methods including size exclusion, AT affinity, ion pairing and strong anion exchange chromatography. Each of these octadecasaccharides possesses two AT binding pentasaccharide sequences located at various positions. After structural elucidation using enzymatic sequencing and NMR, in vitro aFXa and aFIIa were determined. The biological activities reveal the critical role of each pentasaccharide sequence position within the octadecasaccharides and structural requirements to inhibit thrombin. Significant differences in potency, such as the twenty-fold magnitude difference observed between two regioisomers, further highlights the importance of depolymerisation process conditions on LMWH biological activity.

Heparin dodecasaccharide containing two antithrombin-binding pentasaccharides: structural features and biological properties.

The antithrombin (AT) binding properties of heparin and low molecular weight heparins are strongly associated to the presence of the pentasaccharide sequence AGA*IA (A(NAc,6S)-GlcUA-A(NS,3,6S)-I(2S)-A(NS,6S)). By using the highly chemoselective depolymerization to prepare new ultra low molecular weight heparin and coupling it with the original separation techniques, it was possible to isolate a polysaccharide with a biosynthetically unexpected structure and excellent antithrombotic properties. It consisted of a dodecasaccharide containing an unsaturated uronate unit at the nonreducing end and two contiguous AT-binding sequences separated by a nonsulfated iduronate residue. This novel oligosaccharide was characterized by NMR spectroscopy, and its binding with AT was determined by fluorescence titration, NMR, and LC-MS. The dodecasaccharide displayed a significantly increased anti-FXa activity compared with those of the pentasaccharide, fondaparinux, and low molecular weight heparin enoxaparin.

Isolation of a pure octadecasaccharide with antithrombin activity from an ultra-low-molecular-weight heparin.

Heparin and low-molecular-weight heparins (LMWHs) are anticoagulant drugs that mainly inhibit the coagulation cascade by indirectly interacting with factor Xa and factor IIa (thrombin). Inhibition of factor Xa by antithrombin (AT) requires the activation of AT by specific pentasaccharide sequences containing 3-O-sulfated glucosamine. Activated AT also inhibits thrombin by forming a stable ternary complex of AT, thrombin, and a polysaccharide (requires at least an 18-mer/octadeca-mer polysaccharide). The full structure of any naturally occurring octadecasaccharide sequence has yet to be determined. In the context of the development of LMWH biosimilars, structural data on such important biological mediators could be helpful for better understanding and regulatory handling of these drugs. Here we present the isolation and identification of an octadecasaccharide with very high anti-factor Xa activity (∼3 times higher than USP [U.S. Pharmacopeia] heparin). The octadecasaccharide was purified using five sequential chromatographic methods with orthogonal specificity, including gel permeation, AT affinity, strong anion exchange, and ion-pair chromatography. The structure of the octadecasaccharide was determined by controlled enzymatic sequencing and nuclear magnetic resonance (NMR). The isolated octadecasaccharide contained three consecutive AT-binding sites and was tested in coagulation assays to determine its biological activity. The isolation of this octadecasaccharide provides new insights into the modulation of thrombin activity.

Glacial Steady State Topography Controlled by the Coupled Influence of Tectonics and Climate.

Glaciers and rivers are the main agents of mountain erosion. While in the fluvial realm empirical relationships and their mathematical description, such as the stream power law, improved the understanding of fundamental controls on landscape evolution, simple constraints on glacial topography and governing scaling relations are widely lacking. We present a steady state solution for longitudinal profiles along eroding glaciers in a coupled system that includes tectonics and climate. We combined the shallow ice approximation and a glacial erosion rule to calculate ice surface and bed topography from prescribed glacier mass balance gradient and rock uplift rate. Our approach is inspired by the classic application of the stream power law for describing a fluvial steady state but with the striking difference that, in the glacial realm, glacier mass balance is added as an altitude-dependent variable. From our analyses we find that ice surface slope and glacial relief scale with uplift rate with scaling exponents indicating that glacial relief is less sensitive to uplift rate than relief in most fluvial landscapes. Basic scaling relations controlled by either basal sliding or internal deformation follow a power law with the exponent depending on the exponents for the glacial erosion rule and Glen's flow law. In a mixed scenario of sliding and deformation, complicated scaling relations with variable exponents emerge. Furthermore, a cutoff in glacier mass balance or cold ice in high elevations can lead to substantially larger scaling exponents which may provide an explanation for high relief in high latitudes.

Northward migration of the eastern Himalayan syntaxis revealed by OSL thermochronometry.

Erosion influences the dynamical evolution of mountains. However, evidence for the impact of surface processes on tectonics mostly relies on the circumstantial coincidence of rugged topography, high stream power, erosion, and rock uplift. Using the optically stimulated luminescence (OSL) thermochronometry technique, we quantified the spatial and temporal exhumation of the eastern Himalayan syntaxis. We found increasing exhumation rates within the past million years at the northeast end of the Namche Barwa-Gyala Peri dome. These observations imply headward propagation of erosion in the Parlung River, suggesting that the locus of high exhumation has migrated northward. Although surface processes influence exhumation rates, they do not necessarily engage in a feedback that sets the location of tectonic deformation.

Analytical comparison of a US generic enoxaparin with the originator product: The focus on comparative assessment of antithrombin-binding components.

Enoxaparin sodium, a low-molecular-weight heparin (LMWH) prepared from porcine intestinal heparin, is widely used for the prevention and treatment of venous thromboembolism. The antithrombotic activity of heparin is mediated mainly through its activation of antithrombin (AT) and subsequent inhibition of coagulation factors. Heparin is a complex heteropolymer and the sulfation pattern of its alternating uronic acid and glucosamine sugar units is a major factor influencing its biological activity. The manufacturing process itself is associated with the introduction of exogenous microheterogeneities that may further affect its biological efficacy. This is important since enoxaparin is prepared by depolymerizing the heparin with the aim of optimizing its biological activity and safety. Changes during its manufacture could thus affect its biological activity and safety. The current study was performed to assess potential differences between the originator enoxaparin and a new generic enoxaparin commercialized by Teva. Heparinase digestion, AT affinity chromatography, gel permeation chromatography, anion exchange chromatography, and nuclear magnetic resonance methodologies were used. The results indicated differences in oligosaccharides related to the cleavage selectivity around the heparin AT-binding sequences of the Teva Enoxaparin Sodium Injection, USP and the originator Sanofi enoxaparin. These differences influence the strength of the AT-binding affinity of the individual oligosaccharides, their ability to activate AT and, therefore, the inhibitory potency on the proteases of the coagulation cascade. This study, together with other published analytical reports, describes specific compositional differences between generics and originator LWMHs. However, it is yet to be established whether such variations might have any clinical relevance.

Analytical and statistical comparability of generic enoxaparins from the US market with the originator product.

Low-molecular-weight heparins (LMWHs) are complex anticoagulant drugs, made from heparin porcine mucosa starting material. Enoxaparin sodium manufactured by Sanofi is one of the most widely prescribed LMWHs and has been used since 1993 in the USA. In 2010, US Food and Drug Administration approval for supplying generic enoxaparin was granted to Sandoz and subsequently to Amphastar. Little is known, however, of the differences in composition of these preparations. In this study, samples from several batches of generic enoxaparins were purchased on the US market and analyzed with state of the art methodologies, including disaccharide building blocks quantification, nuclear magnetic resonance (NMR), and a combination of orthogonal separation techniques. Direct high-performance liquid chromatography analysis of the different enoxaparin batches revealed distinct process fingerprints associated with each manufacturer. Disaccharide building block analysis showed differences in the degree of sulfation, the presence of glycoserine derivatives, as well as in proportions of disaccharides. Results were compared by statistical approaches using multivariate analysis with a partial least squares discriminant analysis methodology. The variations were statistically significant and allowed a clear distinction to be made between the enoxaparin batches according to their manufacturer. These results were further confirmed by orthogonal analytical techniques, including NMR, which revealed compositional differences of oligosaccharides both in low- and high-affinity antithrombin fractions of enoxaparin.

Erosion by an Alpine glacier.

Assessing the impact of glaciation on Earth's surface requires understanding glacial erosion processes. Developing erosion theories is challenging because of the complex nature of the erosion processes and the difficulty of examining the ice/bedrock interface of contemporary glaciers. We demonstrate that the glacial erosion rate is proportional to the ice-sliding velocity squared, by quantifying spatial variations in ice-sliding velocity and the erosion rate of a fast-flowing Alpine glacier. The nonlinear behavior implies a high erosion sensitivity to small variations in topographic slope and precipitation. A nonlinear rate law suggests that abrasion may dominate over other erosion processes in fast-flowing glaciers. It may also explain the wide range of observed glacial erosion rates and, in part, the impact of glaciation on mountainous landscapes during the past few million years.

Ultra-low-molecular-weight heparins: precise structural features impacting specific anticoagulant activities.

Ultra-low-molecular-weight heparins (ULMWHs) with better efficacy and safety ratios are under development; however, there are few structural data available. The main structural features and molecular weight of ULMWHs were studied and compared to enoxaparin. Their monosaccharide composition and average molecular weights were determined and preparations studied by nuclear magnetic resonance spectroscopy, scanning ultraviolet spectroscopy, circular dichroism and gel permeation chromatography. In general, ULMWHs presented higher 3-O-sulphated glucosamine and unsaturated uronic acid residues, the latter being comparable with their higher degree of depolymerisation. The analysis showed that ULMWHs are structurally related to LMWHs; however, their monosaccharide/oligosaccharide compositions and average molecular weights differed considerably explaining their different anticoagulant activities. The results relate structural features to activity, assisting the development of new and improved therapeutic agents, based on depolymerised heparin, for the prophylaxis and treatment of thrombotic disorders.

Heparin sodium compliance to USP monograph: structural elucidation of an atypical 2.18 ppm NMR signal.

The ¹H nuclear magnetic resonance (NMR) acceptance criteria in the new heparin US Pharmacopeia (USP) monograph do not take into account potential structural modifications responsible for any extra signals observed in ¹H NMR spectra, some purified heparins may be non-compliant under the proposed new USP guidelines and incorrectly classified as unsuitable for pharmaceutical use. Heparins from the "ES" source, containing an extra signal at 2.18 ppm, were depolymerized under controlled conditions using heparinases I, II, and III. The oligosaccharides responsible for the 2.18 ppm signal were enriched using orthogonal chromatographic techniques. After multiple purification steps, we obtained an oligosaccharide mixture containing a highly enriched octasaccharide bearing the structural modification responsible for the extra signal. Following heparinase I depolymerization, a pure tetrasaccharide containing the fingerprint structural modification was isolated for full structural determination. Using 1D and 2D ¹H NMR spectroscopy, the structural moiety responsible for the extra signal at 2.18 ppm was identified as an acetyl group on the heparin backbone, most likely resulting from a very minor manufacturing process side reaction that esterifies the uronic acid at position 3. Such analytical peculiarity has always been present in this heparin source and it was used safety over the years.

Heparin sodium compliance to the new proposed USP monograph: elucidation of a minor structural modification responsible for a process dependent 2.10 ppm NMR signal.

Heparin is a highly sulfated hetero polysaccharide mixture found and extracted from mammalian tissues. It has been widely used as an anticoagulant drug during the past decades. In the new proposed USP heparin monograph, the ¹H NMR acceptance criteria to prevent contamination by over sulfated chondroitin sulfate (OSCS), or other persulfated glycosaminoglycans, specifies that no unidentified signals greater than 4% of the mean of signal height of 1 and 2 should be present in the following ranges: 0.10-2.00, 2.10-3.20, and 5.70-8.00 ppm. However, those criteria do not take into account the impact of potential structural modifications generated by the heparin manufacturing processes. In fact, starting from pig mucosa, heparin purification involves oxidizing reagents such as sodium peroxide, potassium permanganate and peracetic acid. In the present work, we demonstrate that potassium permanganate treated heparins show a small but characteristic extra signal at 2.10 ppm. Controlled heparinase I depolymerisation is used to target and excise the oligosaccharide responsible for this extra signal from the polysaccharide backbone. By using orthogonal chromatographic techniques, the fingerprint oligosaccharide was isolated and its structure elucidated. Without the identification of this structural moiety, such purified heparins may have been considered as non-compliant drug substance and not suitable for pharmaceutical use.

Effects on molecular conformation and anticoagulant activities of 1,6-anhydrosugars at the reducing terminal of antithrombin-binding octasaccharides isolated from low-molecular-weight heparin enoxaparin.

Terminal 1,6-anhydro-aminosugars (1,6-anAS) are typical structural moieties of enoxaparin, a low-molecular-weight heparin (LMWH) widely used for prevention and treatment of thrombotic disorders. In the enoxaparin manufacturing process, these modified amino sugars are formed during the ß-eliminative cleavage of heparin. To investigate the effect of terminal anAS on antithrombin (AT) binding and on inhibition of factor Xa (FXa), two octasaccharides containing modified AT-binding pentasaccharide sequences were isolated from enoxaparin. The molecular conformation of the octasaccharides terminating with N-sulfo-1,6-anhydro-D-mannosamine and N-sulfo-1,6-anhydro-D-glucosamine, respectively, has been determined both in the absence and presence of AT by NMR experiments and docking simulations. Reduced overall contacts of the terminal anAS residues with the binding region of AT induce a decrease in affinity for AT as well as lower anti-FXa activity. The anti-FXa measured either in buffer or plasma milieu does not show any significant difference, suggesting that the inhibition of anti-FXa remains specific and biologically relevant.