A new method for quantitative marking of deposited lithium by chemical treatment on graphite anodes in lithium-ion cells.

A novel approach for the marking of deposited lithium on graphite anodes from large automotive lithium-ion cells (≥6 Ah) is presented. Graphite anode samples were extracted from two different formats (cylindrical and pouch cells) of pristine and differently aged lithium-ion cells. The samples present a variety of anodes with various states of lithium deposition (also known as plating). A chemical modification was performed to metallic lithium deposited on the anode surface due to previous plating with isopropanol (IPA). After this procedure an oxygenated species was detected by scanning electron microscopy (SEM), which later was confirmed as Li2 CO3 by Fourier transform infrared spectroscopy (FTIR) and X-ray powder diffraction (XRPD). A valuation of the covered area by Li2 CO3 was carried out with an image analysis using energy-dispersive X-ray spectroscopy (EDX) and quantitative Rietveld refinement.

Interplay between size and crystal structure of molybdenum dioxide nanoparticles--synthesis, growth mechanism, and electrochemical performance.

A detailed study is presented on the formation of MoO(2) nanoparticles from the dissolution of the precursor to the final rodlike product, with a focus on the exploration of the inorganic reaction occurring ahead of the nucleation step, and interplay between size and crystal structure of MoO(2). In situ X-ray absorption spectroscopy experiments show that the crystallization and the growth process of MoO(2) nanorods is initiated by rapid reduction of the MoO(2) Cl(2) precursor in benzyl alcohol and acetophenone. This reaction triggers the nucleation of 2 nm MoO(2) particles with spherical shape and hexagonal crystal structure. The transformation from spheres into rods emerges as a complex process driven by oriented attachment. High-resolution transmission electron microscopy and X-ray diffraction results provide evidence that the 2 nm particles first aggregate into 5-20 nm-large oriented assemblies. The increase in particle size induces the phase transition from hexagonal to the less symmetrical monoclinic crystal structure, and finally the transformation into rods. Is it shown that electrodes for lithium-ion batteries based on MoO(2) nanorods have a long-term cycling life. The specific discharge capacity even after 200 cycles at a discharge rate of 1 C is about 300 Ah kg(-1) .

Continuous flame aerosol synthesis of carbon-coated nano-LiFePO(4) for Li-ion batteries.

Core-shell, nano-sized LiFePO(4)-carbon particles were made in one step by scalable flame aerosol technology at 7 g/h. Core LiFePO(4) particles were made in an enclosed flame spray pyrolysis (FSP) unit and were coated in-situ downstream by auto thermal carbonization (pyrolysis) of swirl-fed C(2)H(2) in an O(2)-controlled atmosphere. The formation of acetylene carbon black (ACB) shell was investigated as a function of the process fuel-oxidant equivalence ratio (EQR). The core-shell morphology was obtained at slightly fuel-rich conditions (1.0

Influence of morphology of monolithic sulfur-poly(acrylonitrile) composites used as cathode materials in lithium-sulfur batteries on electrochemical performance.

Solvent-induced phase separation (SIPS) and thermally-induced phase separation (TIPS) derived poly(acrylonitrile) (PAN) based monoliths with different morphology and specific surface area were prepared and thermally converted into monolithic sulfur-poly(acrylonitrile) (SPAN) materials for use as active cathode materials in lithium-sulfur batteries. During thermal processing, the macroscopic monolithic structure fully prevailed while significant changes in porosity were observed. Both the monomer content in the precursor PAN-based monoliths and the tortuosity of the final monolithic SPAN materials correlate with the electrochemical performance of the SPAN-based cathodes. Overall, percolation issues predominate. In percolating SPAN-based cathode materials, the specific capacity of the SPAN-based cells increases with decreasing tortuosity. All monolithic SPAN materials provided highly reversible and cycle stable cathodes reaching reversible discharge capacities up to 1330 mA h gsulfur -1 @ 0.25C, 900 mA h gsulfur -1 @ 2C and 420 mA h gsulfur -1 @ 8C.

Highly sensitive SnO2 sensor via reactive laser-induced transfer.

Gas sensors based on tin oxide (SnO2) and palladium doped SnO2 (Pd:SnO2) active materials are fabricated by a laser printing method, i.e. reactive laser-induced forward transfer (rLIFT). Thin films from tin based metal-complex precursors are prepared by spin coating and then laser transferred with high resolution onto sensor structures. The devices fabricated by rLIFT exhibit low ppm sensitivity towards ethanol and methane as well as good stability with respect to air, moisture, and time. Promising results are obtained by applying rLIFT to transfer metal-complex precursors onto uncoated commercial gas sensors. We could show that rLIFT onto commercial sensors is possible if the sensor structures are reinforced prior to printing. The rLIFT fabricated sensors show up to 4 times higher sensitivities then the commercial sensors (with inkjet printed SnO2). In addition, the selectivity towards CH4 of the Pd:SnO2 sensors is significantly enhanced compared to the pure SnO2 sensors. Our results indicate that the reactive laser transfer technique applied here represents an important technical step for the realization of improved gas detection systems with wide-ranging applications in environmental and health monitoring control.

Preparation and Characterization of Li-Ion Graphite Anodes Using Synchrotron Tomography.

We present an approach for multi-layer preparation to perform microstructure analysis of a Li-ion cell anode active material using synchrotron tomography. All necessary steps, from the disassembly of differently-housed cells (pouch and cylindrical), via selection of interesting layer regions, to the separation of the graphite-compound and current collector, are described in detail. The proposed stacking method improves the efficiency of synchrotron tomography by measuring up to ten layers in parallel, without the loss of image resolution nor quality, resulting in a maximization of acquired data. Additionally, we perform an analysis of the obtained 3D volumes by calculating microstructural characteristics, like porosity, tortuosity and specific surface area. Due to a large amount of measurable layers within one stacked sample, differences between aged and pristine material (e.g., significant differences in tortuosity and specific surface area, while porosity remains constant), as well as the homogeneity of the material within one cell could be recognized.