RESUMO
Metal-organic frameworks (MOFs) capable of mobility and manipulation are attractive materials for potential applications in targeted drug delivery, catalysis, and small-scale machines. One way of rendering MOFs navigable is incorporating magnetically responsive nanostructures, which usually involve at least two preparation steps: the growth of the magnetic nanomaterial and its incorporation during the synthesis of the MOF crystals. Now, by using optimal combinations of salts and ligands, zeolitic imidazolate framework composite structures with ferrimagnetic behavior can be readily obtained via a one-step synthetic procedure, that is, without the incorporation of extrinsic magnetic components. The ferrimagnetism of the composite originates from binary oxides of iron and transition metals such as cobalt. This approach exhibits similarities to the natural mineralization of iron oxide species, as is observed in ores and in biomineralization.
RESUMO
Magnetic resonance imaging (MRI) and magnetic particle imaging (MPI) are powerful methods in the early diagnosis of diseases. Both imaging techniques utilize magnetic nanoparticles that have high magnetic susceptibility, strong saturation magnetization, and no coercivity. FeraSpinTM R and its fractionated products have been studied for their imaging performances; however, a detailed magnetic characterization in their immobilized state is still lacking. This is particularly important for applications in MPI that require fixation of magnetic nanoparticles with the target cells or tissues. We examine the magnetic properties of immobilized FeraSpinTM R, its size fractions, and Resovist®, and use the findings to demonstrate which magnetic properties best predict performance. All samples show some degree of oxidation to hematite, and magnetic interaction between the particles, which impact negatively on image performance of the materials. MRI and MPI performance show a linear dependency on the slope of the magnetization curve, i.e., initial susceptibility, and average blocking temperature. The best performance of particles in immobilized state for MPI is found for particle sizes close to the boundary between superparamagnetic (SP) and magnetically ordered, in which only Néel relaxation is important. Initial susceptibility and bifurcation temperature are the best indicators to predict MRI and MPI performance.
Assuntos
Meios de Contraste/química , Dextranos/química , Imageamento por Ressonância Magnética/métodos , Nanopartículas de Magnetita/química , Imagem Molecular/métodos , Tamanho da Partícula , Propriedades de Superfície , TemperaturaRESUMO
We characterize the structural properties of magnetic ellipsoidal hematite colloids with an aspect ratio ρ ≈ 2.3 using a combination of small-angle X-ray scattering and computer simulations. The evolution of the phase diagram with packing fraction Ï and the strength of an applied magnetic field B is described, and the coupling between orientational order of magnetic ellipsoids and the bulk magnetic behavior of their suspension addressed. We establish quantitative structural criteria for the different phase and arrest transitions and map distinct isotropic, polarized non-nematic, and nematic phases over an extended range in the Ï-B coordinates. We show that upon a rotational arrest of the ellipsoids around Ï = 0.59, the bulk magnetic behavior of their suspension switches from superparamagnetic to ordered weakly ferromagnetic. If densely packed and arrested, these magnetic particles thus provide persisting remanent magnetization of the suspension. By exploring structural and magnetic properties together, we extend the often used colloid-atom analogy to the case of magnetic spins.
RESUMO
Highly magnetic metal Co nanoparticles were produced via reducing flame spray pyrolysis, and directly coated with an epoxy polymer in flight. The polymer content in the samples varied between 14 and 56 wt% of nominal content. A homogenous dispersion of Co nanoparticles in the resulting nanocomposites was visualized by electron microscopy. The size and crystallinity of the metallic fillers was not affected by the polymer, as shown by XRD and magnetic hysteresis measurements. The good control of the polymer content in the product nanocomposite was shown by elemental analysis. Further, the successful polymerization in the gas phase was demonstrated by electron microscopy and size measurements. The presented effective, dry and scalable one-step synthesis method for highly magnetic metal nanoparticle/polymer composites presented here may drastically decrease production costs and increase industrial yields.
RESUMO
PURPOSE: Several magnetic resonance imaging (MRI) techniques exploit the difference in magnetic susceptibilities between tissues, but systematic measurements of tissue susceptibility are lacking. Furthermore, there is the question as to whether chemical fixation that is used for ex vivo MRI studies, affects the magnetic properties of the tissue. Here, we determined the magnetic susceptibility and water content of fresh and chemically fixed mouse tissue. METHODS: Mass susceptibility of brain, heart, liver and skeletal muscle samples were determined on a vibrating sample magnetometer at room temperature. Measurements at 50, 125, 200 and 295 K were performed to assess the temperature dependence of susceptibility. Moreover, we measured water content of fresh and fixed samples. RESULTS: All samples show mass susceptibilities between -0.068 and -1.929 × 10-8 m3/kg, compared to -9.338 × 10-9 m3/kg of double distilled water. Heart tissue has a more diamagnetic susceptibility than the other tissues. Compared to fresh tissue, fixed tissue has a less diamagnetic susceptibility. Fixed tissue was not different in water content to fresh tissue and showed no consistent dependence of susceptibility with temperature, whereas fresh tissue shows a decrease to at least 125 K, indicative of a paramagnetic component. CONCLUSIONS: Biological tissues are diamagnetic in comparison to water, where the heart is more diamagnetic than the other tissues, with paramagnetic contributions. Fixation rendered tissue less diamagnetic compared to fresh tissue. Our measurements revealed differences in tissue susceptibility between VSM and QSM, inviting more research to compare susceptibility-based MRI methods with physical measurements of tissue susceptibility.
Assuntos
Encéfalo , Imageamento por Ressonância Magnética , Animais , Encéfalo/diagnóstico por imagem , Mapeamento Encefálico , Fígado/diagnóstico por imagem , Camundongos , Músculo Esquelético/diagnóstico por imagemRESUMO
The brick-and-mortar architecture of biological nacre has inspired the development of synthetic composites with enhanced fracture toughness and multiple functionalities. While the use of metals as the "mortar" phase is an attractive option to maximize fracture toughness of bulk composites, non-mechanical functionalities potentially enabled by the presence of a metal in the structure remain relatively limited and unexplored. Using iron as the mortar phase, we develop and investigate nacre-like composites with high fracture toughness and stiffness combined with unique magnetic, electrical and thermal functionalities. Such metal-ceramic composites are prepared through the sol-gel deposition of iron-based coatings on alumina platelets and the magnetically-driven assembly of the pre-coated platelets into nacre-like architectures, followed by pressure-assisted densification at 1450 °C. With the help of state-of-the-art characterization techniques, we show that this processing route leads to lightweight inorganic structures that display outstanding fracture resistance, show noticeable magnetization and are amenable to fast induction heating. Materials with this set of properties might find use in transport, aerospace and robotic applications that require weight minimization combined with magnetic, electrical or thermal functionalities.
RESUMO
Metachronal waves commonly exist in natural cilia carpets. These emergent phenomena, which originate from phase differences between neighbouring self-beating cilia, are essential for biological transport processes including locomotion, liquid pumping, feeding, and cell delivery. However, studies of such complex active systems are limited, particularly from the experimental side. Here we report magnetically actuated, soft, artificial cilia carpets. By stretching and folding onto curved templates, programmable magnetization patterns can be encoded into artificial cilia carpets, which exhibit metachronal waves in dynamic magnetic fields. We have tested both the transport capabilities in a fluid environment and the locomotion capabilities on a solid surface. This robotic system provides a highly customizable experimental platform that not only assists in understanding fundamental rules of natural cilia carpets, but also paves a path to cilia-inspired soft robots for future biomedical applications.
Assuntos
Células Artificiais , Cílios/fisiologia , Células Artificiais/ultraestrutura , Cílios/ultraestrutura , Simulação por Computador , Hidrodinâmica , Magnetismo , Modelos Biológicos , Movimento (Física) , Impressão Tridimensional/instrumentação , Robótica/instrumentaçãoRESUMO
Control over particle size, size distribution, and colloidal stability are central aims in producing functional nanomaterials. Recently, biomimetic approaches have been successfully used to enhance control over properties in the synthesis of those materials. Magnetotactic bacteria produce protein-stabilized magnetite away from its thermodynamic equilibrium structure. Mimicking the bacteria's proteins using poly-l-arginine we show that by simply increasing the pH, the dimensions of magnetite increase and a single- to mesocrystal transformation is induced. Using synchrotron X-ray diffraction and transmission electron microscopy, we show that magnetite nanoparticles with narrow size distributions and average diameters of 10 ± 2 nm for pH 9, 20 ± 2 nm for pH 10, and up to 40 ± 4 nm for pH 11 can be synthesized. We thus selectively produce superparamagnetic and stable single-domain particles merely by controlling the pH. Remarkably, while an increase in pH brings about a thermodynamically driven decrease in size for magnetite without additives, this dependency on pH is inverted when poly-l-arginine is present.
RESUMO
Elegant design principles in biological materials such as stiffness gradients or sophisticated interfaces provide ingenious solutions for an efficient improvement of their mechanical properties. When materials such as wood are directly used in high-performance applications, it is not possible to entirely profit from these optimizations because stiffness alterations and fiber alignment of the natural material are not designed for the desired application. In this work, wood is turned into a versatile engineering material by incorporating mechanical gradients and by locally adapting the fiber alignment, using a shaping mechanism enabled by reversible interlocks between wood cells. Delignification of the renewable resource wood, a subsequent topographic stacking of the cellulosic scaffolds, and a final densification allow fabrication of desired 3D shapes with tunable fiber architecture. Additionally, prior functionalization of the cellulose scaffolds allows for obtaining tunable functionality combined with mechanical gradients. Locally controllable elastic moduli between 5 and 35 GPa are obtained, inspired by the ability of trees to tailor their macro- and micro-structure. The versatility of this approach has significant relevance in the emerging field of high-performance materials from renewable resources.
RESUMO
Diseased cell treatment by heating with magnetic nanoparticles is hindered by their required high concentrations. A clear relationship between heating efficiency and magnetic properties of nanoparticles has not been attained experimentally yet due to limited availability of magnetic nanoparticles with varying size and composition. Here, versatile flame aerosol technology is used for the synthesis of 21 types of ferro-/ferrimagnetic nanocrystals with varying composition, size, and morphology for hyperthermia and thermoablation therapy. Heating efficiency, magnetic hysteresis, and first-order reversal curves of these materials are compared. The maximum heating performance occurs near the transition from superparamagnetic to single domain state, regardless of particle composition. Most importantly, the ratio between saturation magnetization and coercivity can be linked to the heating properties of magnetic nanoparticles. Magnetic interaction is controlled by changes in the architecture of the nanoparticles and closely analyzed by first-order reversal curves. Silica-coated nonstoichiometric Gd-Zn ferrite exhibits the most promising therapeutic capability at relatively low particle concentrations, as shown in vitro with cancerous prostate cells.
Assuntos
Calefação , Hipertermia Induzida/métodos , Nanopartículas de Magnetita/química , Nanopartículas/química , Microscopia Eletrônica de Transmissão , Dióxido de Silício/químicaRESUMO
Contrast agents for magnetic resonance imaging (MRI) are essential for evidential visualization of soft tissues pathologies. Contrast-enhanced MRI can be carried out with T1- and T2-weighted sequences that require as contrast agents paramagnetic and superparamagnetic materials, respectively. The T1-weighted imaging is frequently preferred over T2-, as it induces a bright contrast for sharper image analysis and allows more rapid image acquisition. Commonly used and FDA-approved T1 contrast agents, however, were shown to be associated with nephrogenic systematic fibrosis due to Gd3+ release from the injected complexes. Here, ultrasmall iron oxide nanocrystals are produced by scalable flame aerosol technology and investigated as T1 MRI contrast agents by focusing on structure-function relationships and cytocompatibility. The optimized nanocrystals are shown to be a promising cytocompatible alternative to commercial Gd-complexes as they attain comparable relaxivities with no apparent cytotoxicity at clinically relevant concentrations tested in vitro against four different cell types (PC3, HepG2, THP-1, and red blood cells). By using SiO2 as a spacing material, the contrast enhancement could be finely tuned by decreasing the effective magnetic size of iron oxide resulting in significant T1 contrast enhancement due to reduced magnetic coupling.
RESUMO
Magnetite nanoparticles exhibit magnetic properties that are size and organization dependent and, for applications that rely on their magnetic state, they usually have to be monodisperse. Forming such particles, however, has remained a challenge. Here, we synthesize 40 nm particles of magnetite in the presence of polyarginine and show that they are composed of 10 nm building blocks, yet diffract like single crystals. We use both bulk magnetic measurements and magnetic induction maps recorded from individual particles using off-axis electron holography to show that each 40 nm particle typically contains a single magnetic domain. The magnetic state is therefore determined primarily by the size of the superstructure and not by the sizes of the constituent sub-units. Our results fundamentally demonstrate the structure - property relationship in a magnetic mesoparticle.
Assuntos
Nanopartículas de Magnetita/ultraestrutura , Óxido Ferroso-Férrico/química , Holografia , Nanopartículas de Magnetita/química , Microscopia Eletrônica de Transmissão , Difração de Nêutrons , Tamanho da Partícula , Peptídeos/química , Espalhamento a Baixo Ângulo , Difração de Raios XRESUMO
We describe the synthesis of hybrid magnetic ellipsoidal nanoparticles that consist of a mixture of two different iron oxide phases, hematite (α-Fe2O3) and maghemite (γ-Fe2O3), and characterize their magnetic field-driven self-assembly. We demonstrate that the relative amount of the two phases can be adjusted in a continuous way by varying the reaction time during the synthesis, leading to strongly varying magnetic properties of the particles. Not only does the saturation magnetization increase dramatically as the composition of the spindles changes from hematite to maghemite, but also the direction of the induced magnetic moment changes from being parallel to the short axis of the spindle to being perpendicular to it. The magnetic dipolar interaction between the particles can be further tuned by adding a screening silica shell. Small-angle X-ray scattering (SAXS) experiments reveal that at high magnetic field, magnetic dipole-dipole interaction forces the silica coated particles to self-assemble into a distorted hexagonal crystal structure at high maghemite content. However, in the case of uncoated maghemite particles, the crystal structure is not very prominent. We interpret this as a consequence of the strong dipolar interaction between uncoated spindles that then become arrested during field-induced self-assembly into a structure riddled with defects.
RESUMO
Iron is a central element in the metabolism of normal and malignant cells. Abnormalities in iron and ferritin expression have been observed in many types of cancer. Interest in characterizing iron compounds in the human brain has increased due to advances in determining a relationship between excess iron accumulation and neurological and neurodegenerative diseases. In this work, four different magnetic methods have been employed to characterize the iron phases and magnetic properties of brain tumour (meningiomas) tissues and non-tumour hippocampal tissues. Four main magnetic components can be distinguished: the diamagnetic matrix, nearly paramagnetic blood, antiferromagnetic ferrihydrite cores of ferritin and ferrimagnetic magnetite and/or maghemite. For the first time, open hysteresis loops have been observed on human brain tissue at room temperature. The hysteresis properties indicate the presence of magnetite and/or maghemite particles that exhibit stable single-domain (SD) behaviour at room temperature. A significantly higher concentration of magnetically ordered magnetite and/or maghemite and a higher estimated concentration of heme iron was found in the meningioma samples. First-order reversal curve diagrams on meningioma tissue further show that the stable SD particles are magnetostatically interacting, implying high-local concentrations (clustering) of these particles in brain tumours. These findings suggest that brain tumour tissue contains an elevated amount of remanent iron oxide phases.
Assuntos
Neoplasias Encefálicas/química , Hipocampo/química , Compostos de Ferro/isolamento & purificação , Magnetismo , Meningioma/química , Óxido Ferroso-Férrico/isolamento & purificação , Óxido Ferroso-Férrico/metabolismo , HumanosRESUMO
Large-scale and reproducible synthesis of nanomaterials is highly sought out for successful translation into clinics. Flame aerosol technology with its proven capacity to manufacture high purity materials (e.g., light guides) up to kg h-1 is explored here for the preparation of highly magnetic, nonstoichiometric Zn-ferrite (Zn0.4 Fe2.6 O4 ) nanoparticles coated in situ with a nanothin SiO2 layer. The focus is on their suitability as magnetic multifunctional theranostic agents analyzing their T2 contrast enhancing capability for magnetic resonance imaging (MRI) and their magnetic hyperthermia performance. The primary particle size is closely controlled from 5 to 35 nm evaluating its impact on magnetic properties, MRI relaxivity, and magnetic heating performance. Most importantly, the addition of Zn in the flame precursor solution facilitates the growth of spinel Zn-ferrite crystals that exhibit superior magnetic properties over iron oxides typically made in flames. These properties result in strong MRI T2 contrast agents as shown on a 4.7 T small animal MRI scanner and lead to a more efficient heating with alternating magnetic fields. Also, by injecting Zn0.4 Fe2.6 O4 nanoparticle suspensions into pork tissue, MR-images are acquired at clinically relevant concentrations. Furthermore, the nanothin SiO2 shell facilitates functionalization with polymers, which improves the biocompatibility of the theranostic system.
Assuntos
Compostos Férricos/administração & dosagem , Febre/tratamento farmacológico , Nanopartículas/administração & dosagem , Dióxido de Silício/administração & dosagem , Zinco/administração & dosagem , Animais , Meios de Contraste/química , Compostos Férricos/química , Campos Magnéticos , Imageamento por Ressonância Magnética/métodos , Magnetismo/métodos , Nanopartículas/química , Tamanho da Partícula , Polímeros/administração & dosagem , Polímeros/química , Ratos , Dióxido de Silício/química , Nanomedicina Teranóstica/métodos , Zinco/químicaRESUMO
Anisotropic and hierarchical structures are bound in nature and highly desired in engineered materials, due to their outstanding functions and performance. Mimicking such natural features with synthetic materials and methods has been a highly active area of research in the last decades. Unlike these methods, we use the native biomaterial wood, with its intrinsic anisotropy and hierarchy as a directional scaffold for the incorporation of magnetic nanoparticles inside the wood material. Nanocrystalline iron oxide particles were synthesized in situ via coprecipitation of ferric and ferrous ions within the interconnected pore network of bulk wood. Imaging with low-vacuum and cryogenic electron microscopy as well as spectral Raman mapping revealed layered nanosize particles firmly attached to the inner surface of the wood cell walls. The mineralogy of iron oxide was identified by XRD powder diffraction and Raman spectroscopy as a mixture of the spinel phases magnetite and maghemite. The intrinsic structural architecture of native wood entails a three-dimensional assembly of the colloidal iron oxide which results in direction-dependent magnetic features of the wood-mineral hybrid material. This superinduced magnetic anisotropy, as quantified by direction-dependent magnetic hysteresis loops and low-field susceptibility tensors, allows for directional lift, drag, alignment, (re)orientation, and actuation, and opens up novel applications of the natural resource wood.
Assuntos
Anisotropia , Compostos Férricos/química , Nanopartículas de Magnetita/química , Madeira/química , Microscopia Eletrônica de Transmissão , Difração de Pó , Análise Espectral Raman , Madeira/ultraestruturaRESUMO
Magnetite is an iron oxide found in rocks. Its magnetic properties are used for paleoclimatic reconstructions. It can also be synthesized in the laboratory to exploit its magnetic properties for bio- and nanotechnological applications. However, although the magnetic properties depend on particle size in a well-understood manner, they also depend on the structure of the oxide, because magnetite oxidizes to maghemite under environmental conditions. The dynamics of this process have not been well described. Here, a study of the alteration of magnetite particles of different sizes as a function of their storage conditions is presented. Smaller nanoparticles are shown to oxidize more rapidly than larger ones, and that the lower the storage temperature, the lower the measured oxidation. In addition, the magnetic properties of the altered particles are not decreased dramatically, thus suggesting that this alteration will not impact the use of such nanoparticles as medical carriers.
RESUMO
We extend the commonly used synthesis strategies for responsive microgels to the design of novel multiresponsive and multifunctional nanoparticles that combine inorganic magnetic, metallic/catalytic and thermoresponsive organic moieties. Magnetic responsiveness is implemented through the integration of silica-coated maghemite nanoparticles into fluorescently labeled crosslinked poly(N-isopropylmethacrylamide) microgels. These particles are then employed as templates for the in situ reduction of catalytically active gold nanoparticles. In order to tune the reactivity of the catalyst through a thermally controlled barrier, an additional layer of crosslinked poly(N-isopropylacrylamide) is added in the final step. We subsequently demonstrate that these particles can be employed as smart catalysts. We show that the thermoresponsive nature of the outer particle shell not only provides control over the catalytic activity, but when combined with a magnetic core allows for very efficient removal of the catalytic system through temperature-controlled reversible coagulation and subsequent magnetophoresis in an applied magnetic field gradient. We finally discuss the use of this design principle for the synthesis of complex hybrid particles for various applications that would all profit from their multiresponsive and multifunctional nature.
RESUMO
The room temperature co-precipitation of ferrous and ferric iron under alkaline conditions typically yields superparamagnetic magnetite nanoparticles below a size of 20 nm. We show that at pH â=â 9 this method can be tuned to grow larger particles with single stable domain magnetic (> 20-30 nm) or even multi-domain behavior (> 80 nm). The crystal growth kinetics resembles surprisingly observations of magnetite crystal formation in magnetotactic bacteria. The physicochemical parameters required for mineralization in these organisms are unknown, therefore this study provides insight into which conditions could possibly prevail in the biomineralizing vesicle compartments (magnetosomes) of these bacteria.
Assuntos
Nanopartículas de Magnetita/química , Bactérias/metabolismo , Bactérias/ultraestrutura , Temperatura Baixa , Nanopartículas de Magnetita/ultraestrutura , Magnetossomos/metabolismo , Magnetossomos/ultraestrutura , Tamanho da PartículaRESUMO
A stimuli-responsive material is synthesized that combines the actuation potential of liquid-crystalline elastomers with the anisotropic magnetic properties of ellipsoidal iron oxide nanoparticles. The resulting nanocomposite exhibits unique shape-memory features with magnetic information, which can be reversibly stored and erased via parameters typical of soft materials, such as high deformations, low stresses, and liquid-crystalline smectic-isotropic transition temperatures.