Updated assessment of occupational safety and health hazards of climate change.

Workers, particularly outdoor workers, are among the populations most disproportionately affected by climate-related hazards. However, scientific research and control actions to comprehensively address these hazards are notably absent. To assess this absence, a seven-category framework was developed in 2009 to characterize the scientific literature published from 1988-2008. Using this framework, a second assessment examined the literature published through 2014, and the current one examines literature from 2014-2021. The objectives were to present literature that updates the framework and related topics and increases awareness of the role of climate change in occupational safety and health. In general, there is substantial literature on worker hazards related to ambient temperatures, biological hazards, and extreme weather but less on air pollution, ultraviolet radiation, industrial transitions, and the built environment. There is growing literature on mental health and health equity issues related to climate change, but much more research is needed. The socioeconomic impacts of climate change also require more research. This study illustrates that workers are experiencing increased morbidity and mortality related to climate change. In all areas of climate-related worker risk, including geoengineering, research is needed on the causality and prevalence of hazards, along with surveillance to identify, and interventions for hazard prevention and control.

Launching the dialogue: Safety and innovation as partners for success in advanced manufacturing.

Emerging and novel technologies, materials, and information integrated into increasingly automated and networked manufacturing processes or into traditional manufacturing settings are enhancing the efficiency and productivity of manufacturing. Globally, there is a move toward a new era in manufacturing that is characterized by: (1) the ability to create and deliver more complex designs of products; (2) the creation and use of materials with new properties that meet a design need; (3) the employment of new technologies, such as additive and digital techniques that improve on conventional manufacturing processes; and (4) a compression of the time from initial design concept to the creation of a final product. Globally, this movement has many names, but "advanced manufacturing" has become the shorthand for this complex integration of material and technology elements that enable new ways to manufacture existing products, as well as new products emerging from new technologies and new design methods. As the breadth of activities associated with advanced manufacturing suggests, there is no single advanced manufacturing industry. Instead, aspects of advanced manufacturing can be identified across a diverse set of business sectors that use manufacturing technologies, ranging from the semiconductors and electronics to the automotive and pharmaceutical industries. The breadth and diversity of advanced manufacturing may change the occupational and environmental risk profile, challenge the basic elements of comprehensive health and safety (material, process, worker, environment, product, and general public health and safety), and provide an opportunity for development and dissemination of occupational and environmental health and safety (OEHS) guidance and best practices. It is unknown how much the risk profile of different elements of OEHS will change, thus requiring an evolution of health and safety practices. These changes may be accomplished most effectively through multi-disciplinary, multi-sector, public-private dialogue that identifies issues and offers solutions.

The role of glucose, insulin and NEFA in regulating tissue triglyceride accumulation: Substrate cooperation in adipose tissue versus substrate competition in skeletal muscle.

BACKGROUND AND AIMS: Metabolic factors initiating adipose tissue expansion and ectopic triglyceride accumulation are not completely understood. We aimed to investigate the independent role of circulating glucose, NEFA and insulin on glucose and NEFA uptake, and lipogenesis in skeletal muscle and subcutaneous adipose tissue (SCAT). METHODS AND RESULTS: Twenty-two pigs were stratified according to four protocols: 1) and 2) low NEFA + high insulin ± high glucose (hyperinsulinaemia-hyperglycaemia or hyperinsulinaemia-euglycaemia), 3) high NEFA + low insulin (fasting), 4) low NEFA + low insulin (nicotinic acid). Positron emission tomography with [18F]fluoro-2-deoxyglucose and [11C]acetate, was combined with [14C]acetate and [U-13C]palmitate enrichment techniques to assess glucose and lipid metabolism. Hyperinsulinaemia increased glucose extraction, whilst hyperglycaemia enhanced glucose uptake in skeletal muscle and SCAT. In SCAT, during hyperglycaemia, elevated glucose uptake was accompanied by greater [U-13C]palmitate-TG enrichment compared to the other groups, and by a 39% increase in de novo lipogenesis (DNL) compared to baseline, consistent with a 70% increment in plasma lipogenic index. Conversely, in skeletal muscle, [U-13C]palmitate-TG enrichment was higher after prolonged fasting. CONCLUSIONS: Our data show the necessary role of hyperglycaemia-hyperinsulinaemia vs euglycaemia-hyperinsulinaemia in promoting expansion of TG stores in SCAT, by the consensual elevation in plasma NEFA and glucose uptake and DNL. In contrast, skeletal muscle NEFA uptake for TG synthesis is primarily driven by circulating NEFA levels. These results suggest that a) prolonged fasting or dietary regimens enhancing lipolysis might promote muscle steatosis, and b) the control of glucose levels, in association with adequate energy balance, might contribute to weight loss.

Micro-techniques for analysis of human adipose tissue fatty acid composition in dietary studies.

BACKGROUND AND AIMS: Adipose tissue (AT) fatty acid (FA) composition is considered to be the gold standard long-term biomarker of dietary fatty acid intake. Typically this measurement is made directly from samples collected via large-needle-biopsy or incision. However, with growing interest in the role of AT in relation to health, ideally the fatty acid composition would be analysed along with other measurements, such as gene expression or histology, on a single AT sample. Here we assess alternative ways of obtaining AT for measuring FA composition, in some cases in conjunction with other measurements. METHODS AND RESULTS: The FA composition of tissue obtained via different methods was compared to that of tissue collected via large-needle or surgical biopsy. Fatty acid composition was not significantly different in AT collected by small-needle mini-biopsy (n = 10), from an RNA 'lipid layer' (obtained during RNA extraction, 2 sites, n = 6 for each), or from cryosectioned tissue prepared for histology (n = 10). We also assessed the usefulness of the composition of plasma NEFA as a surrogate marker of subcutaneous AT (n = 58-80). Most FAs in plasma NEFA correlated strongly with those in AT (P < 0.05). CONCLUSION: It is feasible to measure the FA composition of AT on very small amounts of tissue. Additionally, it is possible to measure FA composition on the lipid rich 'by-product' of AT samples undergoing RNA extraction for gene expression. Samples sectioned for histology are also suitable. This provides further opportunities for multidisciplinary collaborations that may lead to a better application of dietary biomarkers.

Overview of Risk Management for Engineered Nanomaterials.

Occupational exposure to engineered nanomaterials (ENMs) is considered a new and challenging occurrence. Preliminary information from laboratory studies indicates that workers exposed to some kinds of ENMs could be at risk of adverse health effects. To protect the nanomaterial workforce, a precautionary risk management approach is warranted and given the newness of ENMs and emergence of nanotechnology, a naturalistic view of risk management is useful. Employers have the primary responsibility for providing a safe and healthy workplace. This is achieved by identifying and managing risks which include recognition of hazards, assessing exposures, characterizing actual risk, and implementing measures to control those risks. Following traditional risk management models for nanomaterials is challenging because of uncertainties about the nature of hazards, issues in exposure assessment, questions about appropriate control methods, and lack of occupational exposure limits (OELs) or nano-specific regulations. In the absence of OELs specific for nanomaterials, a precautionary approach has been recommended in many countries. The precautionary approach entails minimizing exposures by using engineering controls and personal protective equipment (PPE). Generally, risk management utilizes the hierarchy of controls. Ideally, risk management for nanomaterials should be part of an enterprise-wide risk management program or system and this should include both risk control and a medical surveillance program that assesses the frequency of adverse effects among groups of workers exposed to nanomaterials. In some cases, the medical surveillance could include medical screening of individual workers to detect early signs of work-related illnesses. All medical surveillance should be used to assess the effectiveness of risk management; however, medical surveillance should be considered as a second line of defense to ensure that implemented risk management practices are effective.

Field application of the Nanoparticle Emission Assessment Technique (NEAT): task-based air monitoring during the processing of engineered nanomaterials (ENM) at four facilities.

In early 2006, the National Institute for Occupational Safety and Health created a field research team whose mission is to visit a variety of facilities engaged in the production, handling, or use of engineered nanomaterials (ENMs) and to conduct initial emission and exposure assessments to identify candidate sites for further study. To conduct the assessments, the team developed the Nanoparticle Emission Assessment Technique (NEAT), which has been used at numerous facilities to sample multiple engineered nanomaterials. Data collected at four facilities, which volunteered to serve as test sites, indicate that specific tasks can release ENMs to the workplace atmosphere and that traditional controls such as ventilation can be used to limit exposure. Metrics such as particle number concentration (adjusted for background), airborne mass concentration, and qualitative transmission electron microscopy were used to determine the presence, nature, and magnitude of emissions and whether engineered nanomaterials migrated to the workers' breathing zone. [Supplementary materials are available for this article. Go to the publisher's online edition of Journal of Occupational and Environmental Hygiene for the following free supplemental resource: a PDF file containing information on facilities, a description of processes/tasks, existing controls, and sampling strategy, and a PDF file containing TEM images according to facility and task.].

Dysregulation of hepatic metabolism with obesity: factors influencing glucose and lipid metabolism.

The liver is a key metabolic organ that undertakes a multitude of physiological processes over the course of a day, including intrahepatic lipid and glucose metabolism which plays a key role in the regulation of systemic lipid and glucose concentrations. It serves as an intermediary organ between exogenous (dietary) and endogenous energy supply to extrahepatic organs. Thus, perturbations in hepatic metabolism can impact widely on metabolic disease risk. For example, the accumulation of intra-hepatocellular TAG (IHTG), for which adiposity is almost invariably a causative factor may result in dysregulation of metabolic pathways. Accumulation of IHTG is likely due to an imbalance between fatty acid delivery, synthesis and removal (via oxidation or export as TAG) from the liver; insulin plays a key role in all of these processes.

Dietary Approaches to Stop Hypertension (DASH) diet: applicability and acceptability to a UK population.

BACKGROUND: The Dietary Approaches to Stop Hypertension (DASH) diet is widely promoted in the USA for the prevention and treatment of high blood pressure. It is high in fruit and vegetables, low-fat dairy and wholegrain foods and low in saturated fat and refined sugar. To our knowledge, the use of this dietary pattern has not been assessed in a free-living UK population. METHODS: The DASH diet was adapted to fit UK food preferences and portion sizes. Fourteen healthy subjects followed the adapted DASH diet for 30 days in which they self-selected all food and beverages. Dietary intake was assessed by 5-day food diaries completed before and towards the end of the study. Blood pressure was measured at the beginning and end of the study to assess compliance to the DASH style diet. RESULTS: The DASH diet was easily adapted to fit with UK food preferences. Furthermore, it was well tolerated and accepted by subjects. When on the DASH style diet, subjects reported consuming significantly (P < 0.01) more carbohydrate and protein and less total fat (5%, 6% and 9% total energy, respectively). Sodium intakes decreased by 860 mg day(-1) (P < 0.001). Systolic and diastolic blood pressure decreased significantly (P < 0.05) by 4.6 and 3.9 mmHg, respectively when on the DASH style diet. CONCLUSIONS: The DASH style diet was well accepted and was associated with a decrease in blood pressure in normotensive individuals and should be considered when giving dietary advice to people with elevated blood pressure in the UK.

Nanoparticle Emission Assessment Technique (NEAT) for the identification and measurement of potential inhalation exposure to engineered nanomaterials--Part B: Results from 12 field studies.

The National Institute for Occupational Safety and Health (NIOSH) conducted field studies at 12 sites using the Nanoparticle Emission Assessment Technique (NEAT) to characterize emissions during processes where engineered nanomaterials were produced or used. A description of the NEAT appears in Part A of this issue. Field studies were conducted in research and development laboratories, pilot plants, and manufacturing facilities handling carbon nanotubes (single-walled and multi-walled), carbon nanofibers, fullerenes, carbon nanopearls, metal oxides, electrospun nylon, and quantum dots. The results demonstrated that the NEAT was useful in evaluating emissions and that readily available engineering controls can be applied to minimize nanomaterial emissions.

Nanoparticle emission assessment technique (NEAT) for the identification and measurement of potential inhalation exposure to engineered nanomaterials--part A.

There are currently no exposure limits specific to engineered nanomaterial nor any national or international consensus standards on measurement techniques for nanomaterials in the workplace. However, facilities engaged in the production and use of engineered nanomaterials have expressed an interest in learning whether the potential for worker exposure exists. To assist with answering this question, the National Institute for Occupational Safety and Health established a nanotechnology field research team whose primary goal was to visit facilities and evaluate the potential for release of nanomaterials and worker exposure. The team identified numerous techniques to measure airborne nanomaterials with respect to particle size, mass, surface area, number concentration, and composition. However, some of these techniques lack specificity and field portability and are difficult to use and expensive when applied to routine exposure assessment. This article describes the nanoparticle emission assessment technique (NEAT) that uses a combination of measurement techniques and instruments to assess potential inhalation exposures in facilities that handle or produce engineered nanomaterials. The NEAT utilizes portable direct-reading instrumentation supplemented by a pair of filter-based air samples (source-specific and personal breathing zone). The use of the filter-based samples are crucial for identification purposes because particle counters are generally insensitive to particle source or composition and make it difficult to differentiate between incidental and process-related nanomaterials using number concentration alone. Results from using the NEAT at 12 facilities are presented in the companion article (Part B) in this issue.

Markers of de novo lipogenesis in adipose tissue: associations with small adipocytes and insulin sensitivity in humans.

AIMS/HYPOTHESIS: Previous studies have shown relationships between fatty acid ratios in adipose tissue triacylglycerol (TG), adipocyte size and measures of insulin sensitivity. We hypothesised that variations in adipose tissue de novo lipogenesis (DNL) in relation to adiposity might explain some of these observations. METHODS: In a cross-sectional study, subcutaneous abdominal adipose tissue biopsies from 59 people were examined in relation to fasting and post-glucose insulin sensitivity. Adipocyte size, TG fatty acid composition and mRNA expression of lipogenic genes were determined. RESULTS: We found strong positive relationships between adipose tissue TG content of the fatty acids myristic acid (14:0) and stearic acid (18:0) with insulin sensitivity (HOMA model) (p < 0.01 for each), and inverse relationships with adipocyte size (p < 0.01, p < 0.05, respectively). Variation in 18:0 content was the determinant of the adipose tissue TG 18:1 n-9/18:0 ratio, which correlated negatively with insulin sensitivity (p < 0.01), as observed previously. Adipose tissue 18:0 content correlated positively with the mRNA expression of lipogenic genes (e.g. FASN, p < 0.01). Lipogenic gene expression (a composite measure derived from principal components analysis) was inversely correlated with adipocyte cell size (p < 0.001). There was no relationship between dietary saturated fatty acid intake and adipose tissue 18:0 content. CONCLUSIONS/INTERPRETATION: Our data suggest a physiological mechanism whereby DNL is downregulated as adipocytes expand. Taken together with other data, they also suggest that hepatic and adipose tissue DNL are not regulated in parallel. We also confirm a strong relationship between small adipocytes and insulin sensitivity, which is independent of BMI.

Docosahexaenoic acid enrichment in NAFLD is associated with improvements in hepatic metabolism and hepatic insulin sensitivity: a pilot study.

BACKGROUND/OBJECTIVE: Treatment of subjects with non-alcoholic fatty liver disease (NAFLD) with omega-3 polyunsaturated fatty acids (FAs) suggests high levels of docosahexaenoic acid (DHA) tissue enrichment decrease liver fat content. We assessed whether changes in erythrocyte DHA enrichment (as a surrogate marker of changes in tissue enrichment) were associated with alterations in hepatic de novo lipogenesis (DNL), postprandial FA partitioning and hepatic and peripheral insulin sensitivity in a sub-study of the WELCOME trial (Wessex Evaluation of fatty Liver and Cardiovascular markers in NAFLD (non-alcoholic fatty liver disease) with OMacor thErapy). SUBJECTS/METHODS: Sixteen participants were randomised to 4 g/day EPA+DHA (n=8) or placebo (n=8) for 15-18 months and underwent pre- and post-intervention measurements. Fasting and postprandial hepatic FA metabolism was assessed using metabolic substrates labelled with stable-isotope tracers (2H2O and [U13C]palmitate). Insulin sensitivity was measured by a stepped hyperinsulinaemic-euglycaemic clamp using deuterated glucose. Participants were stratified according to change in DHA erythrocyte enrichment (< or ⩾2% post intervention). RESULTS: Nine participants were stratified to DHA⩾2% (eight randomised to EPA+DHA and one to placebo) and seven to the DHA<2% group (all placebo). Compared with individuals with erythrocyte <2% change in DHA abundance, those with ⩾2% enrichment had significant improvements in hepatic insulin sensitivity, reduced fasting and postprandial plasma triglyceride concentrations, decreased fasting hepatic DNL, as well as greater appearance of 13C from dietary fat into plasma 3-hydroxybutyrate (all P<0.05). CONCLUSIONS: The findings from our pilot study indicate that individuals who achieved a change in erythrocyte DHA enrichment ⩾2% show favourable changes in hepatic FA metabolism and insulin sensitivity, which may contribute to decreasing hepatic fat content.

Docosahexaenoic acid enrichment in NAFLD is associated with improvements in hepatic metabolism and hepatic insulin sensitivity: a pilot study.

This corrects the article DOI: 10.1038/ejcn.2017.9.

Screening for asymptomatic lymphogranuloma venereum co-infection in men who have sex with men newly diagnosed with HIV, hepatitis C or syphilis.

Patients diagnosed with lymphogranuloma venereum have high rates of co-infection with HIV, syphilis and hepatitis C. The aim of this enhanced surveillance was to screen all men who have sex with men (MSM) newly diagnosed with HIV, syphilis or hepatitis C for co-infection with asymptomatic lymphogranuloma venereum as part of the recommended sexual health screen. Of the 145 patients screened, 21 patients were diagnosed with rectal Chlamydia trachomatis, one with both rectal and urethral chlamydia and six with urethral chlamydia. One rectal chlamydia-positive sample, when tested, was equivocal for lymphogranuloma venereum. Our data suggested that there was not a pool of asymptomatic lymphogranuloma venereum infection in MSM recently diagnosed with HIV, hepatitis C and syphilis. However, there have been recent reports of an increased incidence of asymptomatic lymphogranuloma venereum, raising the question whether lymphogranuloma venereum should be screened for in high risk asymptomatic MSM. The prevalence of asymptomatic rectal chlamydia infections was 19%.

Taking stock of the occupational safety and health challenges of nanotechnology: 2000-2015.

Engineered nanomaterials significantly entered commerce at the beginning of the 21st century. Concerns about serious potential health effects of nanomaterials were widespread. Now, approximately 15 years later, it is worthwhile to take stock of research and efforts to protect nanomaterial workers from potential risks of adverse health effects. This article provides and examines timelines for major functional areas (toxicology, metrology, exposure assessment, engineering controls and personal protective equipment, risk assessment, risk management, medical surveillance, and epidemiology) to identify significant contributions to worker safety and health. The occupational safety and health field has responded effectively to identify gaps in knowledge and practice, but further research is warranted and is described. There is now a greater, if imperfect, understanding of the mechanisms underlying nanoparticle toxicology, hazards to workers, and appropriate controls for nanomaterials, but unified analytical standards and exposure characterization methods are still lacking. The development of control-banding and similar strategies has compensated for incomplete data on exposure and risk, but it is unknown how widely such approaches are being adopted. Although the importance of epidemiologic studies and medical surveillance is recognized, implementation has been slowed by logistical issues. Responsible development of nanotechnology requires protection of workers at all stages of the technological life cycle. In each of the functional areas assessed, progress has been made, but more is required.

The effect of replacing dietary saturated fat with polyunsaturated or monounsaturated fat on plasma lipids in free-living young adults.

OBJECTIVE: To examine, in free-living adults eating self-selected diets, the effects on plasma cholesterol of substituting saturated fat rich foods with either n-6 polyunsaturated or monounsaturated fat rich foods while at the same time adhering to a total fat intake of 30-33% of dietary energy. DESIGN: Two randomised crossover trials. SETTING: General community. SUBJECTS: Volunteer sample of healthy free-living nutrition students at the University of Otago. Trial I, n=29; and trial II, n=42. INTERVENTIONS: In trials I and II participants were asked to follow for 2(1/2) weeks a diet high in saturated fat yet with a total fat content that conformed to nutrition recommendations (30-33% energy). During the 2(1/2) week comparison diet, saturated fat rich foods were replaced with foods rich in n-6 polyunsaturated fats (trial I) whereas in trial II the replacement foods were rich in monounsaturated fats. Participants were asked to maintain a total fat intake of 30-33% of energy on all diets. MAIN OUTCOME MEASURES: Energy and nutrient intakes, plasma triglyceride fatty acids, and plasma cholesterol. RESULTS: When replacing saturated fat with either n-6 polyunsaturated fat or monounsaturated fat, total fat intakes decreased by 2.9% energy and 5.1% energy, respectively. Replacing saturated fat with n-6 polyunsaturated fat (trial I) lowered plasma total cholesterol by 19% [from 4.87 (0.88) to 3.94 (0.92) mmol/l, mean (s.d.)], low density lipoprotein cholesterol by 22% [from 2.87 (0.75) to 2.24 (0.67) mmol/l], and high density lipoprotein cholesterol by 14% [from 1.39 (0.36) to 1.19 (0.34) mmol/l], whereas replacing saturated fat with monounsaturated fat (trial II) decreased total cholesterol by 12%, low density lipoprotein cholesterol by 15%, and high density lipoprotein cholesterol by 4%, respectively. The change in the ratio of total to high density lipoprotein cholesterol was similar during trial I and trial II. CONCLUSIONS: Young adults are very responsive to dietary-induced changes in plasma cholesterol even when an isocaloric replacement of saturated fat with n-6 polyunsaturated or monounsaturated fat is not achieved. Replacing saturated fat with either n-6 polyunsaturated or monounsaturated fat is equally efficacious at reducing the total to high density lipoprotein cholesterol ratio. SPONSORSHIP: University of Otago, Meadow Lea Ltd.

Occupational safety and health criteria for responsible development of nanotechnology.

Organizations around the world have called for the responsible development of nanotechnology. The goals of this approach are to emphasize the importance of considering and controlling the potential adverse impacts of nanotechnology in order to develop its capabilities and benefits. A primary area of concern is the potential adverse impact on workers, since they are the first people in society who are exposed to the potential hazards of nanotechnology. Occupational safety and health criteria for defining what constitutes responsible development of nanotechnology are needed. This article presents five criterion actions that should be practiced by decision-makers at the business and societal levels-if nanotechnology is to be developed responsibly. These include (1) anticipate, identify, and track potentially hazardous nanomaterials in the workplace; (2) assess workers' exposures to nanomaterials; (3) assess and communicate hazards and risks to workers; (4) manage occupational safety and health risks; and (5) foster the safe development of nanotechnology and realization of its societal and commercial benefits. All these criteria are necessary for responsible development to occur. Since it is early in the commercialization of nanotechnology, there are still many unknowns and concerns about nanomaterials. Therefore, it is prudent to treat them as potentially hazardous until sufficient toxicology, and exposure data are gathered for nanomaterial-specific hazard and risk assessments. In this emergent period, it is necessary to be clear about the extent of uncertainty and the need for prudent actions.

An audit on the management of lymphogranuloma venereum in a sexual health clinic in London, UK.

We performed an audit on the management of lymphogranuloma venereum (LGV) against the British Association of Sexual Health and HIV (BASHH) guidelines. Sixty-three cases of LGV were diagnosed in 60 men who have sex with men (MSM). Fifty-six out of 63 (89%) episodes were treated in accordance with the guidelines. Although all eligible patients were offered an HIV test, 10% and 29% of patients were not offered syphilis or hepatitis C tests, respectively, at the time of LGV diagnosis. Partner notification was not possible in a third of cases. Several patients were re-infected with rectal Chlamydia trachomatis in the three months following LGV diagnosis, emphasizing the importance of rescreening to detect new infections as well as treatment failures in MSM at ongoing high risk of sexually transmitted infection acquisition.

Does the DASH diet lower blood pressure by altering peripheral vascular function?

We tested whether lowering of blood pressure (BP) on the dietary approaches to stop hypertension (DASH) diet was associated with changes in peripheral vascular function: endothelial function, assessed by flow-mediated vasodilatation (FMD) of the brachial artery, and subcutaneous adipose tissue blood flow (ATBF). We also assessed effects on heart rate variability (HRV) as a measure of autonomic control of the heart. We allocated 27 men and women to DASH diet and control groups. We measured FMD, ATBF and HRV on fasting and after ingestion of 75 g glucose, before and after 30 days on dietary intervention, aiming for weight maintenance. The control group did not change their diet. The DASH-diet group complied with the diet as shown by significant reductions in systolic (P<0.001) and diastolic (P=0.005) BP, and in plasma C-reactive protein (P<0.01), LDL-cholesterol (P<0.01) and apolipoprotein B (P=0.001), a novel finding. Body weight changed by <1 kg. There were no changes in the control group. We found no changes in FMD, or in ATBF, in the DASH-diet group, although heart rate fell (P<0.05). Glucose and insulin concentrations did not change. In this small-scale study, the DASH diet lowered BP independently of peripheral mechanisms.