Self-indicating polymers: a pathway to intelligent materials.

Self-indicating polymers have emerged as a promising class of smart materials that possess the unique ability to undergo detectable variations in their physical or chemical properties in response to various stimuli. This article presents an overview of the most important mechanisms through which these materials exhibit self-indication, including aggregation, phase transition, covalent and non-covalent bond cleavage, isomerization, charge transfer, and energy transfer. Aggregation is a prevalent mechanism observed in self-indicating polymers, where changes in the degree of molecular organization result in variations in optical or electrical properties. Phase transition-induced self-indication relies on the transformation between different phases, such as liquid-to-solid or crystalline-to-amorphous transitions, leading to observable changes in color or conductivity. Covalent bond cleavage-based self-indicating polymers undergo controlled degradation or fragmentation upon exposure to specific triggers, resulting in noticeable variations in their structural or mechanical properties. Isomerization is another crucial mechanism exploited in self-indicating polymers, where the reversible transformation between the different isomeric forms induces detectable changes in fluorescence or absorption spectra. Charge transfer-based self-indicating polymers rely on the modulation of electron or hole transfer within the polymer backbone, manifesting as changes in electrical conductivity or redox properties. Energy transfer is an essential mechanism utilized by certain self-indicating polymers, where energy transfer between chromophores or fluorophores leads to variations in the emission characteristics. Furthermore, this review article highlights the diverse range of applications for self-indicating polymers. These materials find particular use in sensing and monitoring applications, where their responsive nature enables them to act as sensors for specific analytes, environmental parameters, or mechanical stress. Self-indicating polymers have also been used in the development of smart materials, including stimuli-responsive coatings, drug delivery systems, food sensors, wearable devices, and molecular switches. The unique combination of tunable properties and responsiveness makes self-indicating polymers highly promising for future advancements in the fields of biotechnology, materials science, and electronics.

Synergistic topological and supramolecular control of Diels-Alder reactivity based on a tunable self-complexing host-guest molecular switch.

Compartmentalization and binding-triggered conformational change regulate many metabolic processes in living matter. Here, we have synergistically combined these two biorelevant processes to tune the Diels-Alder (DA) reactivity of a synthetic self-complexing host-guest molecular switch CBPQT4+ -Fu, consisting of an electron-rich furan unit covalently attached to the electron-deficient cyclobis(paraquat-p-phenylene) tetrachloride (CBPQT4+ , 4Cl- ) host. This design allows CBPQT4+ -Fu to efficiently compartmentalize the furan ring inside its host cavity in water, thereby protecting it from the DA reaction with maleimide. Remarkably, the self-complexed CBPQT4+ -Fu can undergo a conformational change through intramolecular decomplexation upon the addition of a stronger binding molecular naphthalene derivative as a competitive guest, triggering the DA reaction upon addition of a chemical regulator. Remarkably, connecting the guest to a thermoresponsive lower critical solution temperature (LCST) copolymer regulator controls the DA reaction on command upon heating and cooling the reaction media beyond and below the cloud point temperature of the copolymer, representing a rare example of decreased reactivity upon increasing temperature. Altogether, this work opens up new avenues towards combined topological and supramolecular control over reactivity in synthetic constructs, enabling control over reactivity through molecular regulators or even mild temperature variations.

From One-Dimensional Disordered Racemate to Ordered Racemic Conglomerates through Metal-Coordination-Driven Self-Assembly at the Liquid-Solid Interface.

In recent years, there has been significant focus on investigating and controlling chiral self-assembly, specifically in the context of enantiomeric separation. This study explores the self-assembly behavior of 4-dodecyl-3,6-di(2-pyridyl)pyridazine (DPP-C12) at the interface between heptanoic acid (HA) and highly oriented pyrolytic graphite (HOPG) using a combination of scanning tunneling microscopy (STM) and multiscale molecular modeling. The self-assembled monolayer structure formed by DPP-C12 is periodic in one direction, but aperiodic in the direction orthogonal to it. These structures resemble 1D disordered racemic compounds. Upon introducing palladium [Pd(II)] ions, complexing with DPP-C12, these 1D disordered racemic compounds spontaneously transform into 2D racemic conglomerates, which is rationalized with the assistance of force-field simulations. Our findings provide insights into the regulation of two-dimensional chirality.

Multifunctional Poly(2-ethyl-2-oxazoline) Copolymers Containing Dithiolane and Pentafluorophenyl Esters as Effective Reactive Linkers for Gold Surface Coatings.

Surface functionalization with biological macromolecules is an important task for the development of sensor materials, whereby the interaction with other biological materials should be suppressed. In this work, we developed a novel multifunctional poly(2-ethyl-2-oxazoline)-dithiolane conjugate as a versatile linker for gold surface immobilization of amine-containing biomolecules, containing poly(2-ethyl-2-oxazoline) as antifouling polymer, dithiolane for surface immobilization, and activated esters for protein conjugation. First, a well-defined carboxylic acid containing copoly(2-ethyl-2-oxazoline) was synthesized by cationic ring-opening copolymerization of 2-ethyl-2-oxazoline with a methyl ester-containing 2-oxazoline monomer, followed by postpolymerization modifications. The side-chain carboxylic groups were then converted to amine-reactive pentafluorophenyl (PFP) ester groups. Part of the PFP groups was used for the attachment of the dithiolane moiety, which can efficiently bind to gold surfaces. The final copolymer contained 1.4 mol% of dithiolane groups and 4.5 mol% of PFP groups. The copolymer structure was confirmed by several analytical techniques, including NMR spectroscopy and size-exclusion chromatography. The kinetics of the PFP ester aminolysis and hydrolysis demonstrated significantly faster amidation compared to hydrolysis, which is essential for subsequent protein conjugation. Successful coating of gold surfaces with the polymer was confirmed by spectroscopic ellipsometry, showing a polymer brush thickness of 4.77 nm. Subsequent modification of the coated surfaces was achieved using bovine serum albumin as a model protein. This study introduces a novel reactive polymer linker for gold surface functionalization and offers a versatile polymer platform for various applications including biosensing and surface functionalization.

Non-activated Esters as Reactive Handles in Direct Post-Polymerization Modification.

Non-activated esters are prominently featured functional groups in polymer science, as ester functional monomers display great structural diversity and excellent compatibility with a wide range of polymerization mechanisms. Yet, their direct use as a reactive handle in post-polymerization modification has been typically avoided due to their low reactivity, which impairs the quantitative conversion typically desired in post-polymerization modification reactions. While activated ester approaches are a well-established alternative, the modification of non-activated esters remains a synthetic and economically valuable opportunity. In this review, we discuss past and recent efforts in the utilization of non-activated ester groups as a reactive handle to facilitate transesterification and aminolysis/amidation reactions, and the potential of the developed methodologies in the context of macromolecular engineering.

Influence of Chain Length of Gradient and Block Copoly(2-oxazoline)s on Self-Assembly and Drug Encapsulation.

Amphiphilic gradient copolymers represent a promising alternative to extensively used block copolymers due to their facile one-step synthesis by statistical copolymerization of monomers of different reactivity. Herein, an in-depth analysis is provided of micelles based on amphiphilic gradient poly(2-oxazoline)s with different chain lengths to evaluate their potential for micellar drug delivery systems and compare them to the analogous diblock copolymer micelles. Size, morphology, and stability of self-assembled nanoparticles, loading of hydrophobic drug curcumin, as well as cytotoxicities of the prepared nanoformulations are examined using copoly(2-oxazoline)s with varying chain lengths and comonomer ratios. In addition to several interesting differences between the two copolymer architecture classes, such as more compact self-assembled structures with faster exchange dynamics for the gradient copolymers, it is concluded that gradient copolymers provide stable curcumin nanoformulations with comparable drug loadings to block copolymer systems and benefit from more straightforward copolymer synthesis. The study demonstrates the potential of amphiphilic gradient copolymers as a versatile platform for the synthesis of new polymer therapeutics.

Linear Poly(ethylenimine-propylenimine) Random Copolymers for Gene Delivery: From Polymer Synthesis to Efficient Transfection with High Serum Tolerance.

Naturally occurring oligoamines, such as spermine, spermidine, and putrescine, are well-known regulators of gene expression. These oligoamines frequently have short alkyl spacers with varying lengths between the amines. Linear polyethylenimine (PEI) is a polyamine that has been widely applied as a gene vector, with various formulations currently in clinical trials. In order to emulate natural oligoamine gene regulators, linear random copolymers containing both PEI and polypropylenimine (PPI) repeat units were designed as novel gene delivery agents. In general, statistical copolymerization of 2-oxazolines and 2-oxazines leads to the formation of gradient copolymers. In this study, however, we describe for the first time the synthesis of near-ideal random 2-oxazoline/2-oxazine copolymers through careful tuning of the monomer structures and reactivity as well as polymerization conditions. These copolymers were then transformed into near-random PEI-PPI copolymers by controlled side-chain hydrolysis. The prepared PEI-PPI copolymers formed stable polyplexes with GFP-encoding plasmid DNA, as validated by dynamic light scattering. Furthermore, the cytotoxicity and transfection efficiency of polyplexes were evaluated in C2C12 mouse myoblasts. While the polymer chain length did not significantly increase the toxicity, a higher PPI content was associated with increased toxicity and also lowered the amount of polymers needed to achieve efficient transfection. The transfection efficiency was significantly influenced by the degree of polymerization of PEI-PPI, whereby longer polymers resulted in more transfected cells. Copolymers with 60% or lower PPI content exhibited a good balance between high plasmid-DNA transfection efficiency and low toxicity. Interestingly, these novel PEI-PPI copolymers revealed exceptional serum tolerance, whereby transfection efficiencies of up to 53% of transfected cells were achieved even under 50% serum conditions. These copolymers, especially PEI-PPI with DP500 and a 1:1 PEI/PPI ratio, were identified as promising transfection agents for plasmid DNA.

Accelerated Post-Polymerization Amidation of Polymers with Side-Chain Ester Groups by Intramolecular Activation.

The catalytic conversion of esters to amides represents new opportunities in the synthetic diversification and upcycling of polymers, as esters are commonly featured in various polymer structures. Yet, direct amidation is typically hampered by poor reaction kinetics and the effects of polymer structure on the reactivity remain poorly understood. We report the accelerated amidation for amines with additional hydrogen bond donating or accepting groups. These amines facilitate the expeditious (co)amidation of polymers with pendant ester groups, displaying at least a 400-fold higher reactivity relative to polyesters with esters in the main chain. Furthermore, a positive correlation between the reactivity and degree of polymerization for poly(methyl acrylate) suggests a hydrogen-bond mediated intramolecular activation of the esters, which was confirmed by FT-IR spectroscopy and basic molecular mechanics modeling. The reported method paves the way to synthesize diverse (co)polymers with amide side chains from readily available polymeric precursors.

In Vitro Assessment of the Hydrolytic Stability of Poly(2-isopropenyl-2-oxazoline).

Poly(2-isopropenyl-2-oxazoline) (PiPOx) is emerging as a promising, versatile polymer platform to design functional materials and particularly biomaterials that rely on the hydrophilic character of the 2-oxazoline side units. To be able to assess the applicability of PiPOx in a biomedical context, it is essential to understand its stability and degradation behavior in physiological conditions. In the present work, the hydrolytic stability of PiPOx was systematically investigated as a function of pH during incubation in various buffers. PiPOx was found to be stable in deionized water (pH 6.9), to have good stability in basic conditions (pH 8 and 9), to be satisfactorily stable in neutral conditions (pH 7.4), and to have moderate to low stability in acidic conditions (decreases drastically from pH 6 to pH 1.2). At pH 4, PiPOx formed a crosslinked network in a timeframe of hours, while at pH 1.2, PiPOx was transformed to a water-soluble poly(N-(2-hydroxyethyl)methacrylamide) type of structure over the course of 2 weeks. In vitro stability assays were performed in phosphate-buffered saline (pH 7.4), simulated body fluid (SBF) (pH 7.4), simulated saliva (pH 6.4), simulated intestinal fluid (pH 6.8), and plasma (pH 7.4) revealing that PiPOx is stable in these SBFs up to 1 week of incubation. When incubated in simulated gastric fluid (pH 1.2), PiPOx exhibited a similar degradation behavior to that observed in the buffer at pH 1.2, rendering a water-soluble structure. The presented results on the stability of PiPOx will be important for future use of PiPOx for the development of drug-delivery systems and biomedical applications, such as hydrogels.

Thermoresponsive Polymer-Antibiotic Conjugates Based on Gradient Copolymers of 2-Oxazoline and 2-Oxazine.

A polymer-antibiotic conjugate with thermoresponsive properties near body temperature is presented. The backbone polymer is a copolymer of 2-n-propyl-2-oxazine (PropOzi) and methoxycarbonylethyl-2-oxazoline (C2MestOx) which is conjugated with the broad-spectrum antibiotic, cefazolin, via modification of the methyl ester group of C2MestOx. The resulting polymer-antibiotic conjugate has a cloud point temperature near body temperature, meaning that it can form a homogenous solution if cooled, but when injected into a skin-mimic at 37 °C, it forms a drug depot precipitate. Cleavage of the ester linker leads to quantitative release of the pristine cefazolin (with some antibiotic degradation observed) and redissolution of the polymer. When Escherichia coli were treated with polymer-antibiotic conjugate total clearance is observed within 12 h. The power of this approach is the potential for localized antibiotic delivery, for example, at a specific tissue site or into infected phagocytic cells.

Judging Enzyme-Responsive Micelles by Their Covers: Direct Comparison of Dendritic Amphiphiles with Different Hydrophilic Blocks.

Enzymatically degradable polymeric micelles have great potential as drug delivery systems, allowing the selective release of their active cargo at the site of disease. Furthermore, enzymatic degradation of the polymeric nanocarriers facilitates clearance of the delivery system after it has completed its task. While extensive research is dedicated toward the design and study of the enzymatically degradable hydrophobic block, there is limited understanding on how the hydrophilic shell of the micelle can affect the properties of such enzymatically degradable micelles. In this work, we report a systematic head-to-head comparison of well-defined polymeric micelles with different polymeric shells and two types of enzymatically degradable hydrophobic cores. To carry out this direct comparison, we developed a highly modular approach for preparing clickable, spectrally active enzyme-responsive dendrons with adjustable degree of hydrophobicity. The dendrons were linked with three different widely used hydrophilic polymers-poly(ethylene glycol), poly(2-ethyl-2-oxazoline), and poly(acrylic acid) using the CuAAC click reaction. The high modularity and molecular precision of the synthetic methodology enabled us to easily prepare well-defined amphiphiles that differ either in their hydrophilic block composition or in their hydrophobic dendron. The micelles of the different amphiphiles were thoroughly characterized and their sizes, critical micelle concentrations, drug loading, stability, and cell internalization were compared. We found that the micelle diameter was almost solely dependent on the hydrophobicity of the dendritic hydrophobic block, whereas the enzymatic degradation rate was strongly dependent on the composition of both blocks. Drug encapsulation capacity was very sensitive to the type of the hydrophilic block, indicating that, in addition to the hydrophobic core, the micellar shell also has a significant role in drug encapsulation. Incubation of the spectrally active micelles in the presence of cells showed that the hydrophilic shell significantly affects the micellar stability, localization, cell internalization kinetics, and the cargo release mechanism. Overall, the high molecular precision and the ability of these amphiphiles to report their disassembly, even in complex biological media, allowed us to directly compare the different types of micelles, providing striking insights into how the composition of the micelle shells and cores can affect their properties and potential to serve as nanocarriers.

Fluorine-Containing Block and Gradient Copoly(2-oxazoline)s Based on 2-(3,3,3-Trifluoropropyl)-2-oxazoline: A Quest for the Optimal Self-Assembled Structure for 19F Imaging.

The use of fluorinated contrast agents in magnetic resonance imaging (MRI) facilitates improved image quality due to the negligible amount of endogenous fluorine atoms in the body. In this work, we present a comprehensive study of the influence of the amphiphilic polymer structure and composition on its applicability as contrast agents in 19F MRI. Three series of novel fluorine-containing poly(2-oxazoline) copolymers and terpolymers, hydrophilic-fluorophilic, hydrophilic-lipophilic-fluorophilic, and hydrophilic-thermoresponsive-fluorophilic, with block and gradient distributions of the fluorinated units, were synthesized. It was discovered that the CF3 in the 2-(3,3,3-trifluoropropyl)-2-oxazoline (CF3EtOx) group activated the cationic chain end, leading to faster copolymerization kinetics, whereby spontaneous monomer gradients were formed with accelerated incorporation of 2-methyl-2-oxazoline or 2-n-propyl-2-oxazoline with a gradual change to the less-nucleophilic CF3EtOx monomer. The obtained amphiphilic copolymers and terpolymers form spherical or wormlike micelles in water, which was confirmed using transmission electron microscopy (TEM), while small-angle X-ray scattering (SAXS) revealed the core-shell or core-double-shell morphologies of these nanoparticles. The core and shell sizes obey the scaling laws for starlike micelles predicted by the scaling theory. Biocompatibility studies confirm that all copolymers obtained are noncytotoxic and, at the same time, exhibit high sensitivity during in vitro 19F MRI studies. The gradient copolymers provide the best 19F MRI signal-to-noise ratio in comparison with the analogue block copolymer structures, making them most promising as 19F MRI contrast agents.

Poly(2-allylamidopropyl-2-oxazoline)-Based Hydrogels: From Accelerated Gelation Kinetics to In Vivo Compatibility in a Murine Subdermal Implant Model.

A rapid photo-curing system based on poly(2-ethyl-2-oxazoline-co-2-allylamidopropyl-2-oxazoline) and its in vivo compatibility are presented. The base polymer was synthesized from the copolymerization of 2-ethyl-2-oxazoline (EtOx) and the methyl ester containing 2-methoxycarboxypropyl-2-oxazoline (C3MestOx) followed by amidation with allylamine to yield a highly water-soluble macromer. We showed that spherical hydrogels can be obtained by a simple water-in-oil gelation method using thiol-ene coupling and investigated the in vivo biocompatibility of these hydrogel spheres in a 28-day murine subdermal model. For comparison, hydrogel spheres prepared from poly(ethylene glycol) were also implanted. Both materials displayed mild, yet typical foreign body responses with little signs of fibrosis. This is the first report on the foreign body response of a poly(2-oxazoline) hydrogel, which paves the way for future investigations into how this highly tailorable class of materials can be used for implantable hydrogel devices.

Effect of Host-Guest Complexation on the Thermoresponsive Behavior of Poly(oligo ethylene glycol acrylate)s Functionalized with Dialkoxynapththalene Guest Side Chains.

The combination of thermoresponsive polymers with supramolecular host-guest interactions enables accurate tuning of the phase transition temperature, while also providing additional response mechanisms based on host-guest complexation. Most studies focused on a single thermoresponsive polymer to demonstrate the effect of host-guest complexation on the responsive behavior. In this work, the effect of the polymer structure on the host-guest complexation and thermoresponsive behavior is reported. Therefore, different poly(oligoethylene glycol acrylate)s, namely, poly(2-hydroxyethylacrylate) (PHEA), poly(methoxy diethylene glycol acrylate), poly(methoxy triethylene glycol acrylate), and poly(methoxy tetraethylene glycol acrylate), are synthesized functionalized with 1,5-dialkoxynaphthalene guest molecules in the side chain. Their complexation with the cyclobis(paraquat-p-phenylene) tetrachloride host is studied to understand the effect of polymer structure on the supramolecular association and the polymer phase transition, revealing that the oligoethylene glycol side chains lead to weaker host-guest complexation and also have a smaller increase in the cloud point temperature compared to PHEA.

Asymmetric Incorporation of Silver Nanoparticles in Polymeric Assemblies by Coassembly of Tadpole-Like Nanoparticles and Amphiphilic Block Copolymers.

A general approach to asymmetrically localize nanoparticles (NPs) in larger polymeric nanostructures is demonstrated by coassembly of tadpole-like silver NPs (AgNPs) and amphiphilic block copolymers (BCPs). The tadpole-like AgNPs are prepared by template synthesis using a tailor-made A(BC)20 star polymer, namely poly(ethylene glycol)[poly(acrylic acid)-block-polystyrene]20 [PEG(PAA-b-PS)20 ], as template resulting in AgNPs decorated with twenty short PS chains and one long PEG chain, named Ag@PEG(PS)20 . The asymmetric distribution of these AgNPs in various polymeric nanostructures, e.g., spherical micelles, cylindrical micelles, vesicles, and sponge phase, is achieved via coassembly of the as-prepared Ag@PEG(PS)20 and PEG-b-PS in solution driven by the anisotropic nature of the Ag@PEG(PS)20 . This report not only provides a new strategy for the fabrication of tadpole-like NPs but also offers opportunity for off-center distributing NPs in hybrid assemblies, which may find applications in, e.g., sensing, catalysis, and diagnostics.

Dual Responsive Regulation of Host-Guest Complexation in Aqueous Media to Control Partial Release of the Host.

The regulation of the concentration of a wide range of small molecules is ubiquitous in biological systems because it enables them to adapt to the continuous changes in the environmental conditions. Herein, we report an aqueous synthetic system that provides an orchestrated, temperature and pH controlled regulation of the complexation between the cyclobis(paraquat-p-phenylene) host (BBox) and a 1,5-dialkyloxynaphthalene (DNP) guest attached to a well-defined dual responsive copolymer composed of N-isopropylacrylamide as thermoresponsive monomer and acrylic acid as pH-responsive monomer. Controlled, partial release of the BBox, enabling control over its concentration, is based on the tunable partial collapse of the copolymer. This colored supramolecular assembly is one of the first synthetic systems providing control over the concentration of a small molecule, providing great potential as both T and pH chromic materials and as a basis to develop more complex systems with molecular communication.

On-Demand Dissoluble Diselenide-Containing Hydrogel.

On-demand dissolution of hydrogels is being increasingly studied for their potential use in burn wound dressing applications. Herein, a dynamic diselenide-containing hydrogel is developed through a very simple one-pot and two-step process starting from the selenol functionalization of a partially hydrolyzed poly(2-ethyl-2-oxazoline) with γ-butyroselenolactone. The hydrogel spontaneously cross-links via an in situ oxidation of the selenol functionalities in air. The gelation process and the final viscoelastic properties of the gel are characterized by rheological experiments. The mechanical properties of those new diselenide-containing hydrogels are easily tuned by varying the concentration of γ-butyroselenolactone. The materials also show good skin adhesion and UV light responsiveness. A unique feature of the hydrogel is its capability to be fully and rapidly dissolved on-demand, via oxidation or reduction of the diselenide cross-links, making them particularly attractive for burn wound dressing applications.

Poly(2-ethyl-2-oxazoline) Conjugates with Salicylic Acid via Degradable Modular Ester Linkages.

Conjugation of drugs to polymers is a widely used approach to gain control over the release of therapeutics. In this contribution, salicylic acid, a multipurpose model drug, is conjugated to the biocompatible poly(2-ethyl-2-oxazoline) (PEtOx). The drug is attached to the side chains of a polymer carrier through a hydrolytically cleavable ester linker, via a sequential postpolymerization modification. The chemical modulation of this ester, i.e., by primary or secondary alcohols, is demonstrated to greatly influence the ester hydrolysis rate. This crucial parameter allows us to tune the in vitro kinetics of the sustained drug release for periods exceeding a month in phosphate-buffered saline (PBS). The synthetic accessibility of the cleavable linker, together with the modularity of the drug release rate offered by this approach, highlights the utility of this class of polymers in the field of long-lasting drug delivery systems for persistent and chronic disease treatment.

Self-Healing Metallo-Supramolecular Hydrogel Based on Specific Ni2+ Coordination Interactions of Poly(ethylene glycol) with Bistriazole Pyridine Ligands in the Main Chain.

In this study, a supramolecular hydrogel formed by incorporating the 2,6-bis(1,2,3-triazol-4-yl)-pyridine (btp) ligand in the backbone of a polymer prepared by copper(I)-catalyzed alkyne-azide cycloaddition (CuAAC) "click" polyaddition reaction of 2,6-diethynylpyridine and diazido-poly(ethylene glycol) is reported. The hydrogelation is selectively triggered by the addition of Ni2+ ions to aqueous copolymer solutions. The gelation and rheological properties could be tuned by the change of metal to ligand ratio and polymer concentration. Interestingly, the hydrogel exhibits a fast (within 2 min) and excellent repeatable autonomic healing capacity without external stimuli. This self-healing behavior may find potential applications for the repairing of metal coatings, in the future.

Stoichiometric Control over Partial Transesterification of Polyacrylate Homopolymers as Platform for Functional Copolyacrylates.

Only recently, post-polymerization modification reactions of unactivated polyacrylates have been emerging as an attractive alternative to utilizing reactive monomers, enabling the synthetic upcycling of these widely applied polymers. Within this contribution, the triazabicyclodecene-catalyzed transesterification of polyacrylates is reported, including the reaction kinetics and the broad scope for macromolecular design of functional copolyacrylates. More specifically, the transesterification is performed under equilibrium conditions with a set of primary alcohols whereby the reaction kinetics and the obtained conversion as a function of stoichiometric excess of alcohol are evaluated. The results show that the obtained conversion is dependent on the polarity of the solvent and of the alcohol. Through this approach, the transesterification degree can be accurately controlled by stoichiometry, enabling the precise modulation of the macromolecular structure. Finally, the utility of this approach is demonstrated to incorporate functional side chains that are incompatible with radical polymerization, to facilitate Diels-Alder and thiol-ene reactions, enabling access to a broad range of functional materials from simple polyacrylate homopolymer precursors.