Dynamic polarization-regulated metasurface with variable focal length.

Polarization and focal length are both critical optical parameters with many applications in many fields, such as optical communications and imaging. The development of metasurfaces provides a new realization of optical systems. In this paper, based on metasurfaces' powerful electromagnetic modulation capability, we integrate polarization conversion with continuous zoom function and propose a dynamic polarization-regulated metasurface with variable focal length. It realizes the reversible conversion of polarization state, which can convert linearly polarized light into elliptically polarized light and circularly polarized light and convert circularly polarized light to linearly polarized light. At the same time, it achieves a 4.4× zoom range, with a constant focal length variation from 70 µm to 309 µm. The metasurface has the advantages of small size, easy integration, and reconfigurability, providing a new design idea for complex functional optical systems.

All-dielectric six-foci metalens for infrared polarization detection based on Stokes space.

The detection technology of infrared polarization has gained significant attention due to its ability to provide better identification and obtain more information about the target. In this paper, based on the expression of the full polarization state in Stokes space, we designed micro-nano metasurface functional arrays to calculate the polarization state of the incident light by reading the Stokes parameters (a set of parameters that describe the polarization state). Metalens with linear and circular polarization-dependent functions are designed based on the propagation and geometric phases of the dielectric Si meta-atoms in the infrared band, respectively. The device exhibits a high polarization extinction ratio. The influence of incident angle on polarization-dependent metalens is discussed, and the analysis of incident angle is of great significance for the practical application. An infrared six-foci metalens is proposed, each corresponding to the Poincaré sphere's coordinate component (a graphical polarization state method). By matching the six polarization components of the incident light and the Stokes parameters, the polarization detection function can be realized by calculating the polarization state of the incident light. There is a slight error between the theoretical value and the calculated value of the unit coordinate component of the Stokes parameters. At the same time, the intensity distribution of different incident light polarization azimuth angles and ellipticity angles on the focal plane agrees with the theory. The advantage of the device is that the polarization state of the incident light can be directly calculated without passing through other components. The six-foci metalens have potential applications in polarization detection and imaging, space remote sensing, etc.

Multi-mode plasmonic resonance broadband LWIR metamaterial absorber based on lossy metal ring.

Broadband perfect infrared wave absorption of unpolarized light over a wide range of angles in an ultrathin film is critical for applications such as thermal emitters and imaging. Although many efforts have been made in infrared broadband absorption, it is still challenging to cover the perfect absorption of broadband in the long-wave infrared band. We propose a long-wave infrared broadband, polarization, and incident angle insensitivity metamaterial absorber based on the supercell with four rings of two sizes. Broadband absorption covering the long-wave infrared band is realized by combining four PSPRs and LSPRs absorption peaks excited by the supercell structure. The absorptivity of our absorber exceeds 90% in the wavelength range of 7.76∼14µm, and the average absorptivity reaches 93.8%. The absorber maintains more than 80% absorptivity as the incident angle of unpolarized light reaches 60°, which may have promising applications for thermal emitters, infrared imaging, thermal detection.

Polarization-selective absorptive and transmissive metamaterials.

A polarization sorting metamaterial with polarization filtering and absorption is proposed. When unpolarized incident light strikes the metamaterial, one polarization component is completely absorbed, and the other polarization component is completely transmitted. We achieved an absorption extinction ratio of up to 350 and a transmission extinction ratio of 425 simultaneously in the LWIR. Unlike the 50% energy utilization limit of other polarization absorbers due to the complete reflection of another polarization component, our proposed metamaterial can be composed of layered polarization selective absorption devices to achieve more than 90% energy utilization. Therefore our design can provide a new solution for real-time polarization detection.

Dual-band metamaterial absorber with a low-coherence composite cross structure in mid-wave and long-wave infrared bands.

The atmospheric window in the infrared (IR) band primarily consists of mid-wave (MWIR, 3-5 µm) and long-wave IR (LWIR, 8-12 µm) bands, also known as the working bands in most of the IR devices. The main factor affecting the device capability includes the absorption efficiency, hence, the absorption material. Herein, a dual-band absorber based on the composite cross structure (CCS) in both MWIR and LWIR bands was proposed, with absorption peaks of 4.28 µm and 8.23 µm. The obtained absorber is with high scalability in the MWIR and LWIR region respectively by tuning the structural parameters. A quadrupole polarization model is proposed for further understanding of the uneven distribution of electromagnetic field that was caused by the change of the center spacing of the embedded structure. Meanwhile, it was shown that the two absorption peaks exhibited good incident angle stability. In addition, as the incident angle of the TM mode increases, a waveguide is formed between the embedded structure and the surface structure, leading to another strong absorption in the LWIR band. The results showed that absorption increases as the incident angle increases. The proposed absorber can be a good candidate for applications in thermal emission, detection and solar energy harvesting.

Small-sized long wavelength infrared absorber with perfect ultra-broadband absorptivity.

Two types of ultra-broadband long wavelength infrared (LWIR) absorbers with small period and super thin thickness are designed. The absorption with high absorptivity and large bandwidth is achieved through combined propagating and localized surfaced plasmon resonances. We first design a three-layer absorber with a Ti-Ge-Ti configuration, the period of the structure is only 1.4 µm (nearly 1/8 of the center wavelength), the thickness of its dielectric is only 0.5 µm (1/22 of the center wavelength), and the average absorption is 87.9% under normal incident from 8µm to 14µm. Furthermore, the four-layer absorber with a Ti-Ge-Si3N4-Ti configuration is designed to obtain more average absorption increasing to 94.5% from 8 µm to 14µm under normal incident, the period of the structure increases to 1.6 µm and the total thickness of dielectric increases to 0.6µm. The proposed absorber is polarization-independent and possesses a good tolerance of incident angle. We calculate that the average absorption of the four-layer absorber for both TE- and TM-modes still exceeds 90% up to an incident angle of θ = 40° (90.7% for TE-mode, 91.9% for TM-mode), and exceed 80% up to an incident angle of θ = 60° (80.2% for TE-mode, 82.1% for TM-mode).

Mid-wave and long-wave infrared dual-band stacked metamaterial absorber for broadband with high refractive index sensitivity.

A dual-band metamaterial absorber based on local surface plasmon resonance is designed, which is composed of a periodic arrangement of stacked nanodisk structures. The structure unit consists of two dielectric layers and three metal layers. Based on the finite difference time domain method, under the condition of vertically incident plane light, two absorption peaks in the mid-wave infrared and long-wave infrared (MWIR/LWIR) are obtained, and the absorption is greater than 98%. The absorber has good incident state tolerance characteristics. We can modulate the MWIR/LWIR absorption peaks by changing the radius of the stacked disk structure, and MWIR and LWIR dual-band broadband absorption can be achieved by integrating different size elements in the plane. The average absorption is 71% for MWIR with 1.1 µm bandwidth from 3.2 to 4.3 µm and 88% for LWIR with 3 µm bandwidth from 8.5 to 11.5 µm. At the same time, the structure also has effective refractive index (RI) sensitivity characteristics. In the RI range of 1.8-2, the maximum RI sensitivity of the LWIR and the MWIR is 1085 nm/refractive index unit (RIU) and 1472 nm/RIU, respectively.