RESUMO
The diffraction efficiency, defined as the ratio of diffracted power to incident power, is one of the key working indicators for a computer-generated hologram (CGH). The CGH with high diffraction efficiency could suppress stray light and eliminate ghost images, thus improving interferometric performance in aspherical testing of low-reflectivity or large off-axis distance surfaces. However, the high-efficiency CGH is hard to precisely fabricate by traditional reactive ion etching and focusing ion beam, because it requires high etching depth with a high uniformity and sub-nanometric roughness in the glass, especially in the fabrication of a large CGH with an aperture of up to 300 mm. In this study, fabrication of the above-mentioned CGH was demonstrated via what we believe to be a new method called scanning homogenization etching (SHE), in which the ion source with a Gaussian energy distribution accurately scans the glass surface to realize homogenization etching. Different from controlling dwell time at each etching point, this paper proposes to control the scanning rate to achieve not only uniform but also quantitative depth removal in a single scan. Moreover, the depth errors in deep etching across the whole glass surface can be remarkably reduced due to homogenization effects introduced by multiple scanning etching. Finally, the target etching depth of 692.3â nm with an etching uniformity of 2.2% in the etching of a 300 mm CGH was achieved. The roughness of the etched and unetched area both have Ra values of 0.3â nm. The diffraction efficiency of working order is 39.998%, achieving 98.6% of the theoretical diffraction efficiency. In addition, the SHE is not limited by the aperture of the ion source, so it can achieve even larger diffractive optical elements with high diffraction efficiency and high accuracy.
RESUMO
Mesoporous silica SBA-15 has emerged as a promising adsorbent and separation material due to its unique structural and physicochemical properties. To further enhance its performance, various surface modification strategies, including metal oxide and noble metal incorporation for improved catalytic activity and stability, organic functionalization with amino and thiol groups for enhanced adsorption capacity and selectivity, and inorganic-organic composite modification for synergistic effects, have been extensively explored. This review provides a comprehensive overview of the recent advances in the surface modification of SBA-15 for adsorption and separation applications. The synthesis methods, structural properties, and advantages of SBA-15 are discussed, followed by a detailed analysis of the different modification strategies and their structure-performance relationships. The adsorption and separation performance of functionalized SBA-15 materials in the removal of organic pollutants, heavy metal ions, gases, and biomolecules, as well as in chromatographic and solid-liquid separation, is critically evaluated. Despite the significant progress, challenges and opportunities for future research are identified, including the development of low-cost and sustainable synthesis routes, rational design of SBA-15-based materials with tailored properties, and integration into practical applications. This review aims to guide future research efforts in developing advanced SBA-15-based materials for sustainable environmental and industrial applications, with an emphasis on green and scalable modification strategies.
RESUMO
The primary aim of this study was to investigate the boron leaching process from alkali-activated ludwigite ore. Initially, the ore underwent activation through roasting at 1050 °C for 60 min with 20% sodium carbonate. Subsequently, the study examined the influence of leaching parameters, including temperature, time, liquid-to-solid ratio, and particle size, using the activated ore as the raw material. Additionally, water leaching characteristics of the residues and boron kinetics were analyzed. The results demonstrated that boron leaching efficiency reached 93.71% from the reduced ludwigite ore under specific conditions: leaching temperature of 180 °C, leaching time of 6 h, liquid-to-solid ratio of 8:1, and feed particle size of 52.31 µm (average particle size). Leach residue characteristics indicated the dissolution of minerals during the process. The boron behavior during water leaching followed the Avrami Equation, and the kinetics equation was derived by fitting the leaching data. Moreover, the activation energy (Ea) value for boron leaching was determined to be 8.812 kJ·mol-1 using the Arrhenius Equation, indicating that the leaching process is controlled by diffusion.
RESUMO
Fused silica glass is widely used in optical systems, including astronomical telescopes, laser systems, optical communications, and the semiconductor industry. At the same time, the surface quality of the fused silica directly determines the performance and precision of the system. In order to analyze the microscopic surface interaction based on the basis of tribology, a roughness contact model of pitch and fused silica glass surfaces was established. Analyze the performance parameters of contact materials, surface roughness, and the relationship between load and contact area. Pitch materials with a higher plasticity index have a larger elastoplastic contact area with the fused silica surface during the polishing process. The experimental results demonstrate that the surface quality of the polished fused silica improves as the plasticity index of the pitch material increases. At the same time, judging from the PSD curve results, the polished surface of the No. 55 pitch on the spatial-frequency band curve (100-101/mm) is significantly lower than the other two brands of pitch. Additionally, the Ra value of the workpiece surface roughness reaches 0.091â nm. The results of this study provide important theoretical guidance for achieving full-diameter, full-frequency ultra-smooth polishing of large-diameter complex curved surfaces.
RESUMO
A bubbling reactor is an important type of gas scrubber to reduce SO2 emissions in maritime shipping. Both experiments and simulations were conducted to study the relationship between the periodic gas bubbling process and SO2 concentration at the outlet of the reactor, and the entrainment of liquid droplets on SO2 absorption. The accuracy of the model was verified by comparing the bubble size, the depth of bubbles injected into the water, and the SO2 concentration obtained in both experiments and simulations. The gas bubbling process is accompanied by bubble formation, rise, and collapse. The gas bubbling period is affected by the disturbance of the liquid level. The period of the SO2 concentration at the outlet of the gas bubbling reactor is smaller than that at the gas jar outlet which acts as the gas buffering region. The amounts of water carried out of the bubbling reactor by the gas bubbling process increase with the gas flow rates. The droplets and liquid film in the gas jar and the connecting tube play an important role in the absorption of SO2. This study encourages more research to reduce the fluctuation of SO2 concentration and consider droplet entrainment in the design of bubbling reactors.
Assuntos
ÁguaRESUMO
In many certain optical metrology cases, the pupil is usually divided into multiple connected domains by secondary mirror spiders, thus producing segment piston errors and leaving a false phase unwrapping result. In this paper, a method based on minimization of Zernike gradient polynomial residual (MZGR) is proposed to estimate segment piston errors and correct erroneous phase unwrapping results. Simulations and experiments demonstrated that this method can obtain the segment piston errors precisely under complex aberration forms and varied obscurations, indicating reliable practicality. Comparison to the 4D commercial solution, the RMS (root-mean-square) of the residual decreased from 0.154 λ to 0.020 λ.
RESUMO
The computer-generated hologram (CGH) enables the ultra-high accuracy of surface measurement but causes the wavefront degeneration in the optical system. In this article, we give a high-accuracy analytical simulation of the wavefront degeneration in null test by the elliptical Gaussian model. We propose an analytical expression of instrumental transfer function (ITF) for the CGH null test without knowing the phase distribution of CGH, which gives an efficient instruction to suppress the wavefront degeneration. The ITF of the interferometric null test for a ∅3m aspheric mirror can be optimized from 0 to 0.65 at 0.4 Nyquist frequency.
RESUMO
Large aperture, lightweight optics are frequently utilized in modern optical systems. However, despite the use of advanced techniques for developing their materials, fabrication, and mechanical structure, the coatings placed on the substrates induce slight lattice mismatches and increase the thin film stress on polished surfaces. This significantly distorts nano-accuracy optical surfaces, especially on lightweight freeform surfaces. In this study, we construct a finite element model (FEM) and a ray tracing model to estimate the impact of the stress-induced deformation of the coating on a 1.5m class lightweight silicon carbine (SiC) mirror with a freeform surface. Our simulation results are within 10% deviation from the experimental results, and the deformation texture map matches these results as well. We discuss several possible strategies to overcome stress-induced deformation, including fabrication pre-compensation, lightweight structure redesign, and an inverse print-through effect.
RESUMO
The swing arm profilometer (SAP) has been widely used to test large aspheric optics by measuring the asphericity from its best-fitting sphere (BFS). To further improve the test accuracy, we propose a pose-varied test mode for the SAP with a shorter-range probe to measure off-axis aspheric surfaces with stronger asphericity. In contrast to the classical SAP mode in which the air-table is fixed in a stationary position during measurement, we adjust the pose of each scan arc to match the local BFS and the measurement range of the probe decreases to half that of the global asphericity. To verify the effectiveness, we conduct experiments on an off-axis asphere with a diameter of 3 and 2 m. Compared with a classical SAP mode, it achieved an improved performance of 50% higher repeatability and 32% higher accuracy.
RESUMO
Magnetorheological jet polishing (MJP) plays an important role in polishing complex cavities and special optical elements with high precision. However, the roughness distribution function that describes the variation with polishing time of the roughness value of every area in the polishing area has not been studied deeply. In this paper, the influence of the roughness distribution on the removal function of MJP in optics (with a roughness of less than 10 nm) and its evolution model in the spatial and time domains are studied. With the increase of polishing time, the surface roughness of the central area linearly increases, forming surface defects, such as pits. The roughness of the polishing area exhibits a limited growth trend. Verification experiments are carried out on BK7 glass. The results of the roughness distribution on the removal function prove the correctness of the model. The model laid a foundation; therefore, it has important guidance and reference value for the application to the whole aperture polishing.
RESUMO
Pentaprism scanning technology (PPS) is an absolute testing method that has the advantages of a simple structure and absolute testing without an extra reference flat, as well as being able to provide in situ surface measurements, and more. It plays an important role in the manufacturing process of large flat mirrors. For calibrating the PPS's uncertainty, this paper describes a multi-mode scanning method to implement the measurement of low-order aberrations and introduces the concept of an autocorrelation coefficient to evaluate the data processing progress. These improvements were applied to the measurement of a large flat mirror (1630 mm in diameter), which demonstrates that the measuring uncertainty of PPS can be about 20 nm rms. Furthermore, in regard to the special requirements of M3MP, the prototype mirror of M3M (the tertiary mirror) in the Thirty Meter Telescope project with a non-circular aperture, we analyzed the slope distribution of low-order aberrations, power, and astigmatism. The sample route lines of PPS are then reorganized and a new data process algorithm is implemented. This work was performed in order to improve the PPS's performance in measuring low-order aberrations of large flat mirrors.
RESUMO
Off-axis parabolic parts (OAPs) or quasi-OAPs are mostly frequently used in large optical telescopes. Compared to the stressed mirror polishing, computer-controlled optical surfacing (CCOS) or other computer-controlled subaperture tools provide more flexibility. However, the fabrication efficiency needs to be promoted in tactical ways. In this paper, we present a large aperture CCOS lap equipped with a compound motion unit and go through the grinding and pre-polishing with its figure errors. A CCOS-based heterocercal tool is first used in large optics to restrain the edge effects. In the fine polishing stage, corrective polishing, smoothing, and ion beam figuring are applied in combination to finish. We experimentally test this strategy on an Ø1.5 m OAP, as a part of giant steerable science mirror (GSSM) in the Thirty Meter Telescope. Finally, the surface error of Ø1.5 m OAP is better than 1/50λ RMS (full aperture), and the mid-spatial frequency part is better than 0.64 µrad in slope RMS (effective aperture). The effective fabrication duration is reduced to 2 months.
RESUMO
Belt magnetorheological finishing (Belt-MRF) is a promising tool for large-optics processing. However, before using a spot, its shape should be designed and controlled by the polishing gap. Previous research revealed a remarkably nonlinear relationship between the removal function and normal pressure distribution. The pressure is nonlinearly related to the gap geometry, precluding prediction of the removal function given the polishing gap. Here, we used the concepts of gap slope and virtual ribbon to develop a model of removal profiles in Belt-MRF. Between the belt and the workpiece in the main polishing area, a gap which changes linearly along the flow direction was created using a flat-bottom magnet box. The pressure distribution and removal function were calculated. Simulations were consistent with experiments. Different removal functions, consistent with theoretical calculations, were obtained by adjusting the gap slope. This approach allows to predict removal functions in Belt-MRF.
RESUMO
Edge effect is regarded as one of the most difficult technical issues in a computer controlled optical surfacing (CCOS) process. Traditional opticians have to even up the consequences of the two following cases. Operating CCOS in a large overhang condition affects the accuracy of material removal, while in a small overhang condition, it achieves a more accurate performance, but leaves a narrow rolled-up edge, which takes time and effort to remove. In order to control the edge residuals in the latter case, we present a new concept of the 'heterocercal' tool influence function (TIF). Generated from compound motion equipment, this type of TIF can 'transfer' the material removal from the inner place to the edge, meanwhile maintaining the high accuracy and efficiency of CCOS. We call it the 'heterocercal' TIF, because of the inspiration from the heterocercal tails of sharks, whose upper lobe provides most of the explosive power. The heterocercal TIF was theoretically analyzed, and physically realized in CCOS facilities. Experimental and simulation results showed good agreement. It enables significant control of the edge effect and convergence of entire surface errors in large tool-to-mirror size-ratio conditions. This improvement will largely help manufacturing efficiency in some extremely large optical system projects, like the tertiary mirror of the Thirty Meter Telescope.
RESUMO
In order to process large-aperture aspherical mirrors, we designed and constructed a tri-station machine processing center with a three station device, which bears vectored feed motion of up to 10 axes. Based on this processing center, an aspherical mirror-processing model is proposed, in which each station implements traversal processing of large-aperture aspherical mirrors using only two axes, while the stations are switchable, thus lowering cost and enhancing processing efficiency. The applicability of the tri-station machine is also analyzed. At the same time, a simple and efficient zero-calibration method for processing is proposed. To validate the processing model, using our processing center, we processed an off-axis parabolic SiC mirror with an aperture diameter of 1450 mm. The experimental results indicate that, with a one-step iterative process, the peak to valley (PV) and root mean square (RMS) of the mirror converged from 3.441 and 0.5203 µm to 2.637 and 0.2962 µm, respectively, where the RMS reduced by 43%. The validity and high accuracy of the model are thereby demonstrated.
RESUMO
With high-determinacy and no subsurface damage, Magnetorheological Finishing (MRF) has become an important tool in fabricating high-precision optics. But for large mirrors, the application of MRF is restricted by its small removal function and low material removal rate. In order to improve the material removal rate, shorten the processing cycle, we proposed a new MRF concept, named Belt-MRF to expand the application of MRF to large mirrors and made a prototype with a large remove function, using a belt instead of a very large polishing wheel to expand the polishing length. A series of experimental results on Silicon carbide (SiC) and BK 7 specimens and fabrication simulation verified that the Belt-MRF has high material removal rates, stable removal function and high convergence efficiency which makes it a promising technology for processing large aperture optical elements.
RESUMO
The removal of impurity Al(III) from rare earth ion solution by selective adsorption method was one of the challenging tasks. Herein, calcination and acid dissolution treatment were used to construct the pore structure for the halloysite substrate (Hal-650-H) and provide conditions for the formation of the chitosan mesoporous membrane to prepare composite (Hal-H-2CS). The selective adsorption properties and mechanism of the Hal-H-2CS for Al(III) in the rare earth ion solution were studied. The results showed that the formation of mesoporous structures for chitosan provided abundant sites for the adsorption of Al(III). Hal-H-2CS showed remarkable selective adsorption properties for Al(III) in a wide pH range and the binary mixtures with high content of Al(III) or La(III). The maximum adsorption capacity of Al(III) was 106 mg/g, while the adsorption capacity of La(III) was only 1.41 mg/g at pH 4.0. In addition, the Hal-H-2CS exhibited excellent regeneration and structural stability. The remarkable selective properties of Hal-H-2CS was achieved by the synergistic effect between chitosan mesoporous membrane and Hal-650-H, the main adsorption sites were the OH, NH2, CONH2 of chitosan and the oxygen sites of the Hal-650-H. This work provides a new strategy for the design and preparation of outstanding selective adsorbent for Al(III).
Assuntos
Quitosana , Metais Terras Raras , Poluentes Químicos da Água , Quitosana/química , Argila , Adsorção , Concentração de Íons de Hidrogênio , Íons , Cinética , Poluentes Químicos da Água/químicaRESUMO
Applying the iterative triangulation stitching algorithm, we provide an experimental demonstration by testing a Φ120 mm flat mirror, a Φ1450 mm off-axis parabolic mirror and a convex hyperboloid mirror. By comparing the stitching results with the self-examine subaperture, it shows that the reconstruction results are in consistent with that of the subaperture testing. As all the experiments are conducted with a 5-dof adjustment platform with big adjustment errors, it proves that using the above mentioned algorithm, the subaperture stitching can be easily performed without a precise positioning system. In addition, with the algorithm, we accomplish the coordinate unification between the testing and processing that makes it possible to guide the processing by the stitching result.
RESUMO
Polyetheramine (PEA) is a swelling inhibitor used to address engineering challenges arising from the interaction between montmorillonite (Mt) and water. This study comprehensively investigates the adsorption characteristics of PEA on three representative expansive clay samples: Na-Mt, Ca-Mt, and engineered expansive soil. Additionally, the desorption of exchangeable ions is examined. The findings reveal that a two-stage adsorption kinetic model and a pseudo-second-order kinetic model can properly describe the adsorption kinetics of PEA on expansive clays. PEA exhibits a strong capacity for ion exchange with sodium ions, while the exchange capacity for calcium ions is limited. Both protonated and non-protonated PEA contribute to rapid adsorption processes. The adsorption isotherms are well-fitted by the Langmuir and Freundlich models, with the Langmuir model being reasonable. At lower equilibrium concentrations, a higher proportion of the adsorption amount is attributed to ion exchange compared to higher equilibrium concentrations. Ion exchange emerges as the primary factor contributing to the adsorption of PEA on Na-Mt, whereas the adsorption of PEA on Ca-Mt and expansive soil is primarily attributed to physical adsorption by non-protonated PEA. X-ray diffraction results reveal significant intercalation effects of PEA as they penetrate the interlayer space and hinder interlayer ion hydration. Fourier transform infrared spectrum results demonstrate that the adsorption of PEA minimally impacts the framework of Mt structural units but primarily reduces the adsorbed water content. Clay-PEA composites exhibit a decreased affinity for water. Zeta potential experiments indicate that the adsorption of PEA significantly diminishes the surface potential of clay-PEA composite particles, effectively inhibiting their hydration dispersion.
RESUMO
Considering that a jointed rock mass in a cold area is often affected by periodic freeze-thaw cycles and shear failure, definitions for the mesoscopic and macroscopic damage to a jointed rock mass under the coupling of freeze-thaw and shear are proposed, and the damage mechanism is verified according to experimental results. The results show that: (1) the jointed rock specimens increase macro-joints and meso-defects, the mechanical properties deteriorate significantly under freeze-thaw cycles, and the damage degree becomes more and more significant with the increases in freeze-thaw cycles and joint persistency. (2) When the number of freeze-thaw cycles is constant, the total damage variable value gradually increases with the increase in joint persistency. The damage variable difference in specimens with different persistency is distinct, which is gradually reduced in the later cycles, indicating a weakening influence of persistency on the total damage variable. (3) The shear resistance of non-persistent jointed rock mass in a cold area is determined by the coupling effect of meso-damage and frost heaving macro-damage. The coupling damage variable can accurately describe the damage variation law of jointed rock mass under freeze-thaw cycles and shear load.