Spectroscopy and efficient dual-wavelength laser performances of a Nd:GYSAG crystal.

We reported on the spectral properties and dual-wavelength laser performances of a novel, to the best of our knowledge, Nd:Gd1.8Y1.2ScAl4O12 (Nd:GYSAG) crystal for the first time. The absorption spectra, emission spectra, and fluorescence lifetime were systematically investigated. Further, a continuous-wavelength (CW) laser output power up to 5.02 W was obtained under an absorbed pump power of 9.45 W with slope and optical-to-optical efficiencies of 59.4% and 53.1%, respectively, at 1061.2 and 1063.2 nm. A stable passively Q-switched (PQS) laser employing Cr:YAG as a saturable absorber (SA) was realized. The maximum average output power of 0.756 W with a slope of near 34.4% was obtained with the pulse width, pulse energy, and peak power of 14.0 ns, 128.1 µJ, and 9.15 kW, respectively. The results indicate that the Nd:GYSAG crystal is an excellent laser medium for generating a high-efficiency dual-wavelength laser and has potential in terahertz (THz) laser generation.

[Construction and acceptability of different complementary foods texture in infants and young children aged 6 to 23 months].

OBJECTIVE: To construct the complementary food texture in infants and young children aged 6 to 23 months, and observe the acceptability of complementary food of different months old infants. METHODS: Based on the domestic and foreign guidelines, consensus and literatures on complementary feeding, and combined with the characteristics of children's growth and development in China. The complementary food texture index of 6-23 months old infants and young children was constructed. One province was selected in the south and north respectively, one city and one rural area was selected as the observation point in each province. The stratified random sampling principle was adopted in each observation point, 240 infants and young children were selected for the acceptability study. According to the food type, 12 common foods were selected to make the complementary food toolkit. The parents were instructed to make complementary food at home according to the corresponding month age, observe and record the acceptability of single/mixed complementary food feeding. RESULTS: The complementary food texture index of 6 months, 7-8 months, 9-11 months, 12-17 months, 18-23 months was constructed. Caregivers could make complementary food at the corresponding month age according to the established complementary food texture index. The acceptability of single complementary food for infants and young children aged 6-23 months was 98.3%, 98.7%, 99.8%, 96.9% and 97.5%, respectively. The acceptability of mixed complementary food for children aged 7-23 months was 98.3%, 99.6%, 93.8% and 97.5%, respectively. CONCLUSION: The complementary food texture index of different month age can be made at home, and the acceptability of different texture is good.

Emission cross section redetermination of Nd:LuAG crystals.

The emission cross section of Nd:LuAG was evaluated using two different methods: the Füchtbauer-Ladenburg equation and the threshold-slope measurements; similar results were obtained with both methods. All measurements and calculations were compared with those of Nd:YAG to reduce uncertainty. Detailed spectroscopic properties of Nd:LuAG were demonstrated. The results showed that the peak emission cross section of Nd:LuAG is approximately 20 × 10-20 cm2, approximately 2/3 the emission cross section of Nd:YAG, instead of the previously reported 9.67 × 10-20 cm2. Additionally, the corresponding saturation flux is 0.9 J/cm2. Therefore, the energy storage capacity of Nd:LuAG is not significantly improved, and it is not sufficient for large-scale amplifiers.

Effects of phosphate and silicate on stiffness and viscoelasticity of mature biofilms developed with simulated drinking water.

Biofilms, a porous matrix of cells aggregated with extracellular polymeric substances under the influence of chemical constituents in the feed water, can develop a viscoelastic response to mechanical stresses. In this study, the roles of phosphate and silicate, common additives in corrosion control and meat processing, on the stiffness, viscoelasticity, porous structure networks, and chemical properties of biofilm were investigated. Three-year biofilms on PVC coupons were grown from sand-filtered groundwater with or without one of the non-nutrient (silicate) or nutrient additives (phosphate or phosphate blends). Compared with non-nutrient additives, the phosphate and phosphate-blend additives led to a biofilm with the lowest stiffness, most viscoelastic, and more porous structure, including more connecting throats with greater equivalent radii. The phosphate-based additives also led to more organic species in the biofilm matrix than the silicate additive did. This work demonstrated that nutrient additives could promote biomass accumulation but also reduce mechanical stability.

[Construction of malnutrition visualization system].

OBJECTIVE: To establish a set of visualization systems suitable for displaying the transition of malnutrition status in different population across time and space in China. METHODS: Based on the data characteristics of the four monitoring systems, including the China Nutrition and Health Surveillance, the China Health and Nutrition Survey, the Project of Children Nutrition Improvement in Poor Rural Regions, and the Nutrition Improvement Program for Rural Compulsory Education Students, to be merged and the requirements of this project, the client/server architecture(C/S architecture) application mode was adopted, the Visual Studio 2019 development tool set, Python 3.7-10 and C # 8.0 language programming were used for data integration, and a complete set of data preprocessing, data conversion and data integration calculation processes were established. RESULTS: The malnutrition visualization system provided a visualization display system for the nutritional status of different populations under the multi database fusion index system based on the integrated malnutrition database. The system was able to not only modify, delete and update data, but query, display and analyze malnutrition conditions including growth retardation, low weight, emaciation, micronutrient deficiency, overweight, and obesity. CONCLUSION: Malnutrition visualization system dynamically presented the time series and spatial distribution of malnutrition among Chinese residents, and explored the regional characteristics and major challenges of nutrition problems in different periods.

[Cost-benefit analysis of Ying Yang Bao (YYB) intervention in 6 to 23 months rural infants].

OBJECTIVE: To study on the cost-benefit from anemia and stunting reduction of Ying Yang Bao(YYB) intervention in 6 to 23 months rural infants in the six counties of Shanxi, Hubei and Yunnan provinces. METHODS: YYB was distributed to 6-23 months infants in 6 counties by YYB nutrition intervention project. The numbers of childhood recovered from stunting and anemia was collected by a designed project monitoring plan. The cost-benefit was analyzed with PROFILING model as a nutritional microeconomic tool. RESULTS: Total numbers of monitored infants was 10 672 while the total cost of YYB intervention was estimated 2.57 million RMB. From 2012 to 2020, the total benefit was 14.92 million RMB from recover of stunting and anemia by YYB project and the average cost-benefit ratio of 6 counties was 1∶5.8. Sensitivity analysis showed the result of this study was stable. CONCLUSION: The YYB nutrition intervention for infants aged 6-23 months in the six counties of Shanxi, Hubei and Yunnan provinces showed a high cost-benefit ratio.

Effect of Nonphosphorus Corrosion Inhibitors on Biofilm Pore Structure and Mechanical Properties.

Understanding the effects of biofilm structural and mechanical properties, which can influence biofilm cohesiveness and detachment under physical stress, is critical for biofilm and biofilm-associated pathogen control. In this study, we used optical coherence tomography (OCT) and nanoindentation to determine the role of silicate and tin (two experimental nonphosphate corrosion inhibitors) on the porous structure and stiffness of three types of multispecies biofilms. These biofilms were grown from groundwater (a drinking water source), and this groundwater was amended with either tin or silicate corrosion inhibitor (0.5 mg/L as Sn and 20 mg/L as SiO2). Based on the elastic moduli of these biofilms, tin biofilms and groundwater biofilms were the stiffest, followed by silicate biofilms. The thickness normalized by the growth time for silicate biofilms was highest at 38 ± 7.1 µm/month, compared to 21 ± 3.2 and 11 ± 2.4 µm/month for tin biofilms and groundwater biofilms, respectively. The silicate biofilms had the greatest overall porosities and were thickest among the three biofilms. Based on the pore network modeling (PNM) of OCT images, larger pores and connections were found in the silicate biofilms compared to those in tin and groundwater biofilms. Our analysis showed that the thicker and more porous biofilms (silicate biofilms) were potentially less resistant to deformation than the thinner and denser biofilms (tin and groundwater biofilms).

Effect of Disinfectant Exposure on Legionella pneumophila Associated with Simulated Drinking Water Biofilms: Release, Inactivation, and Infectivity.

Legionella pneumophila, the most commonly identified causative agent in drinking water associated with disease outbreaks, can be harbored by and released from drinking water biofilms. In this study, the release of biofilm-associated L. pneumophila under simulated drinking water flow containing a disinfectant residual was examined. Meanwhile, the inactivation and infectivity (to amoebae) of the released L. pneumophila were studied. To simulate drinking water system conditions, biofilms were prepared under either disinfectant exposure (predisinfected biofilms) or disinfectant-free (untreated biofilms) conditions, respectively. For experiments with water flow containing a disinfectant to release the biofilm-associated L. pneumophila from these two types of biofilms, the L. pneumophila release kinetics values from predisinfected and untreated biofilms under flow condition were not statistically different (one-way ANOVA, p > 0.05). However, inactivation of the L. pneumophila released from predisinfected biofilms was 1-2 times higher and amoeba infectivity was 2-29 times lower than that from untreated biofilms. The higher disinfectant resistance of L. pneumophila released from untreated biofilms was presumably influenced by the detachment of a larger amount of biofilm material (determined by 16S rRNA qPCR) surrounding the released L. pneumophila. This study highlights the interaction among disinfectant residual, biofilms, and L. pneumophila, which provides guidelines to assess and control pathogen risk.

Response of Simulated Drinking Water Biofilm Mechanical and Structural Properties to Long-Term Disinfectant Exposure.

Mechanical and structural properties of biofilms influence the accumulation and release of pathogens in drinking water distribution systems (DWDS). Thus, understanding how long-term residual disinfectants exposure affects biofilm mechanical and structural properties is a necessary aspect for pathogen risk assessment and control. In this study, elastic modulus and structure of groundwater biofilms was monitored by atomic force microscopy (AFM) and optical coherence tomography (OCT) during three months of exposure to monochloramine or free chlorine. After the first month of disinfectant exposure, the mean stiffness of monochloramine- or free-chlorine-treated biofilms was 4 to 9 times higher than those before treatment. Meanwhile, the biofilm thickness decreased from 120 ± 8 µm to 93 ± 6-107 ± 11 µm. The increased surface stiffness and decreased biofilm thickness within the first month of disinfectant exposure was presumably due to the consumption of biomass. However, by the second to third month during disinfectant exposure, the biofilm mean stiffness showed a 2- to 4-fold decrease, and the biofilm thickness increased to 110 ± 7-129 ± 8 µm, suggesting that the biofilms adapted to disinfectant exposure. After three months of the disinfectant exposure process, the disinfected biofilms showed 2-5 times higher mean stiffness (as determined by AFM) and 6-13-fold higher ratios of protein over polysaccharide, as determined by differential staining and confocal laser scanning microscopy (CLSM), than the nondisinfected groundwater biofilms. However, the disinfected biofilms and nondisinfected biofilms showed statistically similar thicknesses (t test, p > 0.05), suggesting that long-term disinfection may not significantly remove net biomass. This study showed how biofilm mechanical and structural properties vary in response to a complex DWDS environment, which will contribute to further research on the risk assessment and control of biofilm-associated-pathogens in DWDS.

Role of biofilm roughness and hydrodynamic conditions in Legionella pneumophila adhesion to and detachment from simulated drinking water biofilms.

Biofilms in drinking water distribution systems (DWDS) could exacerbate the persistence and associated risks of pathogenic Legionella pneumophila (L. pneumophila), thus raising human health concerns. However, mechanisms controlling adhesion and subsequent detachment of L. pneumophila associated with biofilms remain unclear. We determined the connection between L. pneumophila adhesion and subsequent detachment with biofilm physical structure characterization using optical coherence tomography (OCT) imaging technique. Analysis of the OCT images of multispecies biofilms grown under low nutrient condition up to 34 weeks revealed the lack of biofilm deformation even when these biofilms were exposed to flow velocity of 0.7 m/s, typical flow for DWDS. L. pneumophila adhesion on these biofilm under low flow velocity (0.007 m/s) positively correlated with biofilm roughness due to enlarged biofilm surface area and local flow conditions created by roughness asperities. The preadhered L. pneumophila on selected rough and smooth biofilms were found to detach when these biofilms were subjected to higher flow velocity. At the flow velocity of 0.1 and 0.3 m/s, the ratio of detached cell from the smooth biofilm surface was from 1.3 to 1.4 times higher than that from the rough biofilm surface, presumably because of the low shear stress zones near roughness asperities. This study determined that physical structure and local hydrodynamics control L. pneumophila adhesion to and detachment from simulated drinking water biofilm, thus it is the first step toward reducing the risk of L. pneumophila exposure and subsequent infections.

Multiple chaos synchronization system for power quality classification in a power system.

This document proposes multiple chaos synchronization (CS) systems for power quality (PQ) disturbances classification in a power system. Chen-Lee based CS systems use multiple detectors to track the dynamic errors between the normal signal and the disturbance signal, including power harmonics, voltage fluctuation phenomena, and voltage interruptions. Multiple detectors are used to monitor the dynamic errors between the master system and the slave system and are used to construct the feature patterns from time-domain signals. The maximum likelihood method (MLM), as a classifier, performs a comparison of the patterns of the features in the database. The proposed method can adapt itself without the need for adjustment of parameters or iterative computation. For a sample power system, the test results showed accurate discrimination, good robustness, and faster processing time for the detection of PQ disturbances.

Influence of phosphate on bacterial release from activated carbon point-of-use filters and on biofilm characteristics.

Point-of-use (POU) filters certified to remove lead are often composed of activated carbon and have been shown to release high concentrations of bacteria, including opportunistic pathogens. In this study, we examine the impacts of the common corrosion inhibitor phosphate on biofilm characteristics and the relationship between biofilm structure and bacterial release from POU filters. This knowledge is essential for understanding how best to use the filters and where these filters fit in a system where other lead contamination prevention measures may be in place. We measured the bacterial release from activated carbon POU filters fed with groundwater - a common source of drinking water - with and without phosphate. We used optical coherence tomography (OCT) to quantitatively characterize biofilm growing on activated carbon filter material in which the biofilms were fed groundwater with and without phosphate. Phosphate filters released significantly less (57-87 %) bacteria than groundwater filters, and phosphate biofilms (median thickness: 82-331 µm) grew to be significantly thicker than groundwater biofilms (median thickness: 122-221 µm). The phosphate biofilm roughness ranged from 97 to 142 % of the groundwater biofilm roughness and was significantly greater in most weeks. Phosphate biofilms also had fewer pores per biofilm volume and shorter channels connecting those pores.

Chlorine decay and disinfection by-products formation during chlorination of biofilms formed with simulated drinking water containing corrosion inhibitors.

Corrosion inhibitors used to reduce pipe corrosion can alter the physical structure and biochemical components of the biofilm in premise plumbing systems. We studied the effects of corrosion inhibitors on chlorine decay and associated disinfection by-products (DBPs) formation by biofilms grown with simulated drinking water amended with silicate, phosphate, and the phosphate blends. Experiments were conducted with either intact biofilms or biofilm materials dispersed in solution during sonication (referred to as biomass). While there was no significant difference in chlorine decay among biomass from different biofilms, biomass from the phosphate blend biofilm showed the lowest trihalomethane (THMs) and haloacetic acids (HAAs) formation. The chlorine decay rate constants from the biofilm experiment were ranked as: phosphate blends > phosphate ≈ groundwater (GW) > silicate. The kinetics of chlorine decay and formation of DBPs were successfully described by pseudo-first-order kinetics. These fitting parameters were used to predict the DBPs formation in a realistic premise plumbing system. The results showed that biofilm-derived THMs and HAAs increased with increasing chlorine concentration, while THMs and HAAs first increased and then stabilized to a maximum with increasing biofilm total organic carbon (TOC) concentration. In general, the biofilms grown with phosphate-based corrosion inhibitors resulted in lower DBPs formation yield but higher bacterial release, which could potentially increase the risk of user exposure to opportunistic pathogens in drinking water. The silicate biofilms showed the largest yield coefficient of DBPs formation but had the least biomass and lower bacterial release.

Effect of disinfectant residuals on infection risks from Legionella pneumophila released by biofilms grown under simulated premise plumbing conditions.

The ubiquitous presence of biofilms in premise plumbing and stagnation, which commonly occurs in premise plumbing, can exacerbate the decay of chlorine residual in drinking water. Using biofilms grown in a simulated premise plumbing setup fed directly with freshly treated water at two full-scale water treatment plants, we previously determined the mass transfer coefficients for chlorine decay in premise plumbing. These coefficients coupled with inactivation kinetics of L. pneumophila released from biofilms reported previously were integrated into a Monte Carlo framework to estimate the infection risk of biofilm-derived L. pneumophila from 1 to 48 h of stagnation. The annual infection risk was significantly higher when water stayed stagnant for up to 48 h in pipes covered internally with biofilms, compared to clean pipes without biofilms. The decay of residual chlorine due to biofilms during 48-hour stagnation led to up to 6 times increase in the annual infection risk compared to the case where biofilms was absent. Global sensitivity analysis revealed that the rate of L. pneumophila detachment from biofilms and the decay of chlorine residual during stagnation are the two most important factors influencing the infection risks. Stagnation caused by water use patterns and water-saving devices in the premise plumbing can lead to increased infection risk by biofilm-derived L. pneumophila. Overall, this study's findings suggested that biofilms could induce chlorine decay and consequently increase L. pneumophila infection risk. Thus, reducing stagnation, maintaining residual chlorine, and suppressing biofilm growth could contribute to better management of L. pneumophila infection risk.

Epidemiological study on hand, foot and mouth disease in Tongzhou District, Beijing, 2013-2017.

OBJECTIVE: To study the epidemiological characteristics of hand, foot and mouth disease (HFMD) in Tongzhou District, Beijing between 2013 and 2017. METHODS: Data on HFMD infections from 1 January 2013 to 31 December 2017 were collected from the Notifiable Infectious Diseases Reporting Information System and analysed. Serotyping of enteroviruses from samples from patients with HFMD was undertaken using reverse transcription-polymerase chain reaction. RESULTS: A total of 15 341 patients with HFMD were reported and 32 patients (0.2%) were classified as having severe HFMD. The annual mean incidence rate of HFMD was 219.3/100 000 of the general population. The incidence and case-severity rates of HFMD generally decreased between 2013 and 2017. In the floating migrant population, the incidence and cases-severity rates of HFMD were significantly higher than in the local population. The peak incidence and severity-case rates were at 2 years of age and > 90% of patients were ≤5 years. Enterovirus A71 and Coxsackievirus A16 were the predominant pathogens in 2013-2017. CONCLUSIONS: During the 5-year period 2013-2017, the incidence rate and case-severity rate of HFMD generally decreased in Tongzhou District, Beijing. The floating migrant population and children ≤5 years of age were at the highest risk of HFMD.

Role of drinking water biofilms on residual chlorine decay and trihalomethane formation: An experimental and modeling study.

PVC pipe loops were constructed to simulate household premise plumbing. These pipe loops were exposed to water treated by physical processes at three water treatment plants in Xiamen, China from August 2016 to June 2017. After the biofilms were allowed to develop inside the pipes, these pipes were deconstructed and exposed to organic-free chlorine solution buffered at pH 6.8 ±â€¯0.2 for 48 h. The decay of chlorine by these biofilms was higher than by the effluent waters that were used to grow the biofilms. A chlorine consumption mass balance model elucidated the role of both the diffusion of chlorine into the biofilm and the reaction of chlorine with the biofilm matrix. Comparable concentrations of trihalomethanes were quantified from the reaction between chlorine and source water organic matters, and chlorine and the biofilm, further emphasizing the role of biofilms in the safety of disinfected drinking water. These findings imply that when chlorine is used in the drinking water distribution system, the ubiquitous presence of biofilms may cause the depletion of chlorine and the formation of non-negligible levels of toxic disinfection byproducts.

Asynchrony of spectral blue-shifts of quantum dot based digital homogeneous immunoassay.

A femtomolar digital homogenous immunoassay is developed based on sensitively distinguishing the immunocomplexes labeled with quantum dot (QD) aggregates from the excessive free monodisperse single QDs. The success in quantifying the carcino-embryonic antigen and alpha-fetoprotein in plasma validated the feasibility of our approach for clinical tests.

A Single-Molecule Homogeneous Immunoassay by Counting Spatially "Overlapping" Two-Color Quantum Dots with Wide-Field Fluorescence Microscopy.

We developed a single-molecule homogeneous immunoassay by counting spatially "overlapping" two-color quantum dots (QD) under a wide-field fluorescence microscope. QD 655 with red fluorescence and QD 565 with green fluorescence were modified with capture and detection antibodies, respectively. A capture antibody-modified QD 655 and a detection antibody-modified QD 565 were conjugated by a corresponding antigen molecule to form a "sandwich" immunocomplex. The conjugated QD 655 could not be distinguished from the conjugated QD 565 by fluorescent microscopy because the distance between them was smaller than the resolution of an optical microscope (approximately 200 nm). The immunocomplex color became yellow because of the spatial "overlap" of the red and green fluorescence. The number of the yellow spots was equal to the number of immunocomplex molecules, while the concentration of the antigen was related to the ratio of the yellow dots to the red dots. The successful quantification of two model proteins in the human plasma, namely, alpha-fetoprotein and carcinoembryonic antigen, demonstrated the accuracy and reliability of our approach.

Fast Switching Properties and Ion Diffusion Behavior of Polytriphenylamine Derivative with Pendent Ionic Liquid Unit.

A novel triphenylamine derivative-linked ionic liquid unit, 1-(6-((4-(bis(4-(thiophen-2-yl)phenyl)amino)benzoyl)oxy)hexyl)-3-methyl-imidazolium tetrafluoroborate (TTPAC6IL-BF4), was designed and synthesized successfully, and its corresponding polymer PTTPAC6IL-BF4 was obtained by the electropolymerization method. The highest occupied molecular orbital energy band of TTPAC6IL-BF4 is higher and the onset oxidative potential lower compared with that of 6-bromohexyl 4-(bis(4-(thiophen-2-yl)phenyl)amino) benzoate (TTPAC6Br) without modifying the ionic liquid unit. Both PTTPAC6IL-BF4 and PTTPAC6Br show similar color change and optical contrast under different redox states. However, PTTPAC6IL-BF4 presents a faster electrochromic switching time than PTTPAC6Br owing to the improved ionic conductivity and ion diffusion coefficient with the introduction of a pendent ionic liquid unit. It is more intriguing that PTTPAC6IL-BF4 could show electrochromism under different potentials even without supplying any additional electrolyte. The particular behavior further proves that BF4- ions around imidazole cations at the side chain may participate in balancing the charge of the polymer backbone when redox reaction happens, resulting in faster movement of ions during the doping process. The results imply that introducing an ionic liquid unit to the side chain is an efficient method to improve the switching time of conjugated polymers and would be inspirational for the design and preparation of novel bifunctional electrochromic polymeric electrolytes.

Disintegration of simulated drinking water biofilms with arrays of microchannel plasma jets.

Biofilms exist and thrive within drinking water distribution networks, and can present human health concerns. Exposure of simulated drinking water biofilms, grown from groundwater, to a 9 × 9 array of microchannel plasma jets has the effect of severely eroding the biofilm and deactivating the organisms they harbor. In-situ measurements of biofilm structure and thickness with an optical coherence tomography (OCT) system show the biofilm thickness to fall from 122 ± 17 µm to 55 ± 13 µm after 15 min. of exposure of the biofilm to the microplasma column array, when the plasmas are dissipating a power density of 58 W/cm2. All biofilms investigated vanish with 20 min. of exposure. Confocal laser scanning microscopy (CLSM) demonstrates that the number of living cells in the biofilms declines by more than 93% with 15 min. of biofilm exposure to the plasma arrays. Concentrations of several oxygen-bearing species, generated by the plasma array, were found to be 0.4-21 nM/s for the hydroxyl radical (OH), 85-396 nM/s for the 1O2 excited molecule, 98-280 µM for H2O2, and 24-42 µM for O3 when the power density delivered to the array was varied between 3.6 W/cm2 and 79 W/cm2. The data presented here demonstrate the potential of microplasma arrays as a tool for controlling, through non-thermal disruption and removal, mixed-species biofilms prevalent in commercial and residential water systems.