RESUMO
Cancer cell glycocalyx is a major line of defence against immune surveillance. However, how specific physical properties of the glycocalyx are regulated on a molecular level, contribute to immune evasion and may be overcome through immunoengineering must be resolved. Here we report how cancer-associated mucins and their glycosylation contribute to the nanoscale material thickness of the glycocalyx and consequently modulate the functional interactions with cytotoxic immune cells. Natural-killer-cell-mediated cytotoxicity is inversely correlated with the glycocalyx thickness of the target cells. Changes in glycocalyx thickness of approximately 10 nm can alter the susceptibility to immune cell attack. Enhanced stimulation of natural killer and T cells through equipment with chimeric antigen receptors can improve the cytotoxicity against mucin-bearing target cells. Alternatively, cytotoxicity can be enhanced through engineering effector cells to display glycocalyx-editing enzymes, including mucinases and sialidases. Together, our results motivate the development of immunoengineering strategies that overcome the glycocalyx armour of cancer cells.
Assuntos
Antineoplásicos , Neoplasias , Humanos , Glicocálix/metabolismo , Mucinas/metabolismo , Antineoplásicos/metabolismo , Neoplasias/terapiaRESUMO
Pursuing effective and generalized strategies for modulating the electronic structures of atomically dispersed nanozymes with remarkable catalytic performance is exceptionally attractive yet challenging. Herein, we developed a facile "formamide condensation and carbonization" strategy to fabricate a library of single-atom (M1-NC; 6 types) and dual-atom (M1/M2-NC; 13 types) metal-nitrogen-carbon nanozymes (M = Fe, Co, Ni, Mn, Ru, Cu) to reveal peroxidase- (POD-) like activities. The Fe1Co1-NC dual-atom nanozyme with Fe1-N4/Co1-N4 coordination displayed the highest POD-like activity. Density functional theory (DFT) calculations revealed that the Co atom site synergistically affects the d-band center position of the Fe atom site and served as the second reaction center, which contributes to better POD-like activity. Finally, Fe1Co1 NC was shown to be effective in inhibiting tumor growth both in vitro and in vivo, suggesting that diatomic synergy is an effective strategy for developing artificial nanozymes as novel nanocatalytic therapeutics.
Assuntos
Peroxidase , Peroxidases , Carbono , Catálise , CorantesRESUMO
Developing Type-I photosensitizers provides an attractive approach to solve the dilemma of inadequate efficacy of photodynamic therapy (PDT) caused by the inherent oxygen consumption of traditional Type-II PDT and anoxic tumor microenvironment. The challenge for the exploration of Type-I PSs is to facilitate the electron transfer ability of photosensitization molecules for transforming oxygen or H2O to reactive oxygen species (ROS). Herein, we propose an electronic acceptor-triggered photoinduced electron transfer (a-PET) strategy promoting the separation of electron-hole pairs by marriage of two organic semiconducting molecules of a non-fullerene scaffold-based photosensitizer and a perylene diimide that significantly boost the Type-I PDT pathway to produce plentiful ROS, especially, inducing 3.5-fold and 2.5-fold amplification of hydroxyl (OHâ ) and superoxide (O2 -â ) generation. Systematic mechanism exploration reveals that intermolecular electron transfer and intramolecular charge separation after photoirradiation generate a competent production of radical ion pairs that promote the Type-I PDT process by theoretical calculation and ultrafast femtosecond transient absorption (fs-TA) spectroscopy. By complementary tumor diagnosis with photoacoustic imaging and second near-infrared fluorescence imaging, this as-prepared nanoplatform exhibits fabulous photocytotoxicity in harsh hypoxic conditions and terrific cancer revoked abilities in living mice. We envision that this work will broaden the insight into high-efficiency Type-I PDT for cancer phototheranostics.
Assuntos
Nanopartículas , Neoplasias , Fotoquimioterapia , Camundongos , Animais , Oxigênio , Fotoquimioterapia/métodos , Espécies Reativas de Oxigênio/metabolismo , Elétrons , Fármacos Fotossensibilizantes/farmacologia , Fármacos Fotossensibilizantes/uso terapêutico , Fármacos Fotossensibilizantes/química , Neoplasias/tratamento farmacológico , Nanopartículas/química , Microambiente TumoralRESUMO
Photoelectrochemical (PEC) sensing has been rapidly evolving in recent years, while the introduction of small molecules with specific recognition functions into the sensing interface remains a nascent area of study. In this work, we reported a PEC biosensor for formaldehyde (FA) detection based on photoinduced electron transfer (PET)-gated electron injection between organic small molecules and inorganic semiconducting substrates. Specifically, an FA-responsive probe (NA-FA-COOH) and TiO2 nanoarrays were integrated to construct a PEC platform (NFC/TiO2) via a coordination bond. NFC served simultaneously as a target-specific recognition element and a modulator of photoinduced electron injection. Treatment of NFC/TiO2 by FA would suppress the intramolecular PET process, with the quenched photocurrent signal due to the changed carrier transfer pathway, thus establishing the PEC platform for FA based on effective PET modulation. The proposed PEC system exhibited high selectivity and sensitivity, with a low detection limit of 0.071 µM. This study presents a novel perspective on the use of organic small molecules with a PET effect for advanced PEC bioanalysis.
Assuntos
Técnicas Biossensoriais , Elétrons , Técnicas Eletroquímicas , Limite de Detecção , Titânio/químicaRESUMO
Accurate identification of acutely toxic and low-fatality mycotoxins on a large scale in a quick and cheap manner is critical for reducing population mortality. Herein, a portable photothermal immunosensing platform supported by a microelectromechanical microsystem (MEMS) without enzyme involvement was reported for point-of-care testing of mycotoxins (in the case of aflatoxin B1, AFB1) in food based on the precise satellite structure of Au nanoparticles. The synthesized Au nanoparticles with a well-defined, graded satellite structure exhibited a significantly enhanced photothermal response and were coupled by AFB1 antibodies to form signal conversion probes by physisorption for further target-promoted competitive responses in microplates. In addition, a coin-sized miniature NIR camera device was constructed for temperature acquisition during target testing based on advanced MEMS fabrication technology to address the limitation of expensive signal acquisition components of current photothermal sensors. The proposed MEMS readout-based microphotothermal test method provides excellent AFB1 response in the range of 0.5-500 ng g-1 with detection limits as low as 0.27 ng g-1. In addition, the main reasons for the efficient photothermal transduction efficiency of Au with different graded structures were analyzed by finite element simulations, providing theoretical guidance for the development of new Au-based photothermal agents. In conclusion, the proposed portable micro-photothermal test system offers great potential for point-of-care diagnostics for residents, which will continue to facilitate immediate food safety identification in resource-limited regions.
Assuntos
Nanopartículas Metálicas , Micotoxinas , Aflatoxina B1/análise , Ouro , Nanopartículas Metálicas/química , Imunoensaio/métodos , Testes ImediatosRESUMO
The point-of-care (POC) method with affordability and portability for the sensitive detection of biological substances is an emerging topic in rapid disease screening and personalized medicine. In this work, we demonstrated a diverse responsive platform based on a dual-channel pressure sensor (DCPS). The DCPS had a multilayer flexible architecture consisting of a photonic hydrogel with chromatic transitions and a piezoresistive pressure sensor as the electrical data transmission unit, both of which had the property of pressure-induced mechanical stimulus feedback. By incorporating a platinum nanoparticles-labeled detection antibody (PtNPs-dAb) into the sandwich-type immunoreaction for the target carcinoembryonic antigen (CEA, as a model analyte), gas decomposition could be triggered by the addition of hydrogen peroxide (H2O2) to induce a significant increase under pressure in a closed chamber. Meanwhile, the DCPS enabled an accurate electrical signal output, and the photonic hydrogel converted spatiotemporal stimuli into eye-readable colorations with string brilliance. In this way, the target concentration could be quantificationally related to the electrical response and intuitively perceived through visible color alterations. Under optimal conditions, a sensitive determination of CEA was performed in a detectable range of 0.3-60 ng/mL with a limit of detection (LOD) of 0.13 ng/mL. In addition, the proposed protocol had satisfactory selectivity, accuracy, and reproducibility. Furthermore, an array-based immunoassay device was fabricated to conceptually validate its application potential in high-throughput biomedical detection and inspire a dual-signal POC diagnostic platform in a friendly way for resource-limited settings.
Assuntos
Técnicas Biossensoriais , Nanopartículas Metálicas , Antígeno Carcinoembrionário , Ouro , Hidrogéis , Peróxido de Hidrogênio , Imunoensaio/métodos , Limite de Detecção , Platina , Sistemas Automatizados de Assistência Junto ao Leito , Reprodutibilidade dos TestesRESUMO
This work reports a contactless photoelectrochemical biosensor based on an ultraviolet-assisted gas sensor (UV-AGS) with a homemade three-dimensional (3D)-SnS2 nanosheet-functionalized interdigitated electrode. After rigorous examination, it was found that the gas responsiveness accelerated and the sensitivity increased using the UV irradiation strategy. The effects of the interlayer structure and the Schottky heterojunction on the gas-sensitive response of O2 and NH3 under UV irradiation were further investigated theoretically by 3D electrostatic field simulations and first-principles density functional theory to reveal the mechanism. Finally, a UV-AGS device was developed to quantify the blood ammonia bioassay in a small-volume whole blood sample by alkalizing blood to release gas-phase ammonia with a linear range of 25-5000 µM with a limit of detection (LOD) of 29.5 µM. The device also enables a rapid immunoassay of human cardiac troponin I (cTnI) with a linear range of 0.4-25.6 ng/mL and an LOD of 0.37 ng/mL using a urease-labeled antibody as the immune recognition molecule. Both analyses showed satisfying specificity and stability, suggesting that the device can be applied to practical assays and is of great potential to increase the value of gas-sensitive sensors in chemical biosensing.
Assuntos
Técnicas Biossensoriais , Técnicas Eletroquímicas , Amônia , Técnicas Biossensoriais/métodos , Técnicas Eletroquímicas/métodos , Eletrodos , Humanos , Limite de DetecçãoRESUMO
A magnetic-assisted photoelectrochemical (PEC) and colorimetric (CL) dual-modal biosensing platform with high precision was established to monitor prostate-specific antigen (PSA) based on Bi2MoO6 nanosheets (BMO) by coupling the aptamer-guided hybridization chain reaction (HCR) with the hydrolysate-induced vulcanization reaction of Bi2MoO6 nanosheets. Upon addition of PSA, trigger DNA (tDNA) was released by the interaction between the target analyte and the aptamer and then further hybridized with anchor DNA (aDNA) conjugated on magnetic beads (MBs). The as-released tDNA initiated the target-assisted HCR in the presence of two alternating hairpin sequences (Bio-H1 and Bio-H2) to produce nicked long double-stranded DNA on the surface of MBs, where numerous alkaline phosphatase (ALP) enzymes could assemble with MBs through the biotin-avidin reaction, resulting in the hydrolysis of sodium thiophosphate (TP) to H2S. The as-produced H2S reacted with BMO to form vulcanized BMO (BMO-S), thus leading to obvious enhanced PEC performance under visible light with the color change from light yellow to brown. Having optimized the test conditions, the magnetic-assisted biosensing system holds a good quantitative diagnosis sensitivity area in a range of 5.0 pg mL-1-100 ng mL-1 with a calculated detection limit down to 3.5 pg mL-1. Meanwhile, a visual colorimetric assay on basis of the change in the color of the materials was also realized. Given the exceptional performance of the constructed biosensor, it may possess great promise as an advanced bioanalytical tool for practical applications.
Assuntos
Técnicas Biossensoriais , Antígeno Prostático Específico , Biocatálise , Bismuto , DNA , Técnicas Eletroquímicas/métodos , Humanos , Limite de Detecção , Masculino , MolibdênioRESUMO
A self-powered temperature sensor based on Seebeck effect transduction was designed for photothermal-thermoelectric coupled immunoassay of α-fetoprotein (AFP). In this system, glucose oxidase (GOx)-conjugated detection antibody was first captured onto the microplate by target-induced sandwich-type immunoreaction. Thereafter, the as-generated hydrogen peroxide via the GOx-glucose system oxidized 3,3',5,5'-tetrametylbenzidine (TMB) into photothermal product oxidized TMB (ox-TMB). Under near-infrared (NIR) laser irradiation, the temperature change of ox-TMB was read out in an electrical signal by the flexible thermoelectric module in a 3D-printed integrated detection device. Under optimal conditions, the photothermal-thermoelectric coupled immunoassay exhibited a limit of detection of 0.39 ng mL-1 AFP over a dynamic linear range from 0.5 to 60 ng mL-1. Impressively, such a strategy presented herein offers tremendous potentials for applying many other high-efficiency thermoelectric materials in ultrasensitive biosensors.
Assuntos
Técnicas Biossensoriais , Técnicas Eletroquímicas , Imunoensaio , Temperatura , alfa-Fetoproteínas/análise , Técnicas Biossensoriais/instrumentação , Técnicas Eletroquímicas/instrumentação , Imunoensaio/instrumentação , Processos FotoquímicosRESUMO
A highly compressible and all-solid-state polydimethylsiloxane (PDMS) sponge-based flexible capacitance sensor modified with polypyrrole (PPy) was designed as the signal readout for the sensitive immunoassay of prostate-specific antigen (PSA). This system mainly consisted of a compressible capacitance sensor, immunoreaction protocol and gas delivery channel. The capacitance sensor was connected to a single microplate by a syringe, whereas the immunoreaction was carried out in the microplate. The conjugated catalase with the detection antibody via biotin-streptavidin interaction could trigger gas generation to cause a pressure change, thus resulting in the increase in the capacitance of the PPy-PDMS sponge observed with an LCR-6100 digital bridge capacitance meter. By coupling with the capacitance sensor, the capacitance change could be monitored in real time to achieve portable detection of PSA. Under the optimal conditions, the compressible supercapacitor PPy-PDMS sponge showed great electrochemical performance and remained stable under compressive strains. The capacitance increased with increasing target PSA concentration within a dynamic working range of 0.1-50 ng mL-1 at a detection limit of 57 pg mL-1. Moreover, acceptable reproducibility, precision and high specificity were obtained from PSA analysis, and were in good accordance with the commercial PSA ELISA kit.
Assuntos
Polímeros , Pirróis , Dimetilpolisiloxanos , Humanos , Imunoensaio , Masculino , Sistemas Automatizados de Assistência Junto ao Leito , Antígeno Prostático Específico , Reprodutibilidade dos TestesRESUMO
A paper-based visual fluorescence immunoassay is presented for the detection of matrix metalloproteinase-7 (MMP7) that is related to renal cancer. The method is based on the distance-dependent fluorescence quenching of CdTe quantum dots (QDs) on a nitrocellulose membrane by Ag+ following a sandwich-type immunoreaction on microtiter wells using silver nanoparticle (AgNP)-labeled secondary antibody- and primary antibody-coated microtiter wells. The silver nanoparticles captured in the well are dissolved with HNO3, while the quenching effect of QDs is based on silver ion-exchange reaction under 365-nm excitation light irradiation. Increasing concentration of released Ag+, thus higher concentration of the protein, leads to an increased distance of quenching on the nitrocellulose membrane. The paper-based immunoassay by combination of AgNP-assisted ion-exchange reaction with QD gives good distance-dependent responses and allows the detection of MMP7 at a concentration as low as 7.3 pg mL-1. The coefficients of variation are less than 6.9% and 12.4% for intra-assay and inter-assay, respectively. High specificity and long-term stability are achieved during the assay. Importantly, the testing of human serum samples using our strategy shows well-matched results with commercial human MMP7 ELISA kits. Graphical abstract A distance-dependent visual immunoassay is developed for the determination of serum matrix metalloproteinase-7 on CdTe quantum dot-impregnated paper with silver ion-exchange reaction.
Assuntos
Compostos de Cádmio/química , Nanopartículas Metálicas/química , Pontos Quânticos/metabolismo , Telúrio/química , Fluorescência , HumanosRESUMO
Heterogeneous distribution of components in the biological membrane is critical in the process of cell polarization. However, little is known about the mechanisms that can generate and maintain the heterogeneous distribution of the membrane components. Here, we report that the propagating wave patterns of the bacterial Min proteins can impose steric pressure on the membrane, resulting in transport and directional accumulation of the component in the membrane. Therefore, the membrane component waves represent transport of the component in the membrane that is caused by the steric pressure gradient induced by the differential levels of binding and dissociation of the Min proteins in the propagating waves on the membrane surface. The diffusivity, majorly influenced by the membrane anchor of the component, and the repulsed ability, majorly influenced by the steric property of the membrane component, determine the differential spatial distribution of the membrane component. Thus, transportation of the membrane component by the Min proteins follows a simple physical principle, which resembles a linear peristaltic pumping process, to selectively segregate and maintain heterogeneous distribution of materials in the membrane. VIDEO ABSTRACT.
Assuntos
Proteínas de Bactérias/química , Proteínas de Bactérias/metabolismo , Membrana Celular/metabolismo , Transporte Biológico Ativo , Cinética , Modelos BiológicosRESUMO
Processing and managing cell membrane proteins for characterization while maintaining their intact structure is challenging. Hydrodynamic flow has been used to transport membrane species in supported lipid bilayers (SLBs) where the hydrophobic cores of the membrane species can be protected during processing. However, the forced convection mechanism of species embedded in lipid bilayers is still unclear. Developing a controlled SLB platform with a practical model to predict the membrane species mobility in the platform under in-lipid-membrane forced convection is imperative to ensure the practical applicability of SLBs in processing and managing membrane species with various geometrical properties. The mobility of membrane species is affected by the driving force from the aqueous environment in addition to the frictions from the lipid bilayer, in which both lipid leaflets may exhibit different speeds relative to that of the moving species. In this study, we developed a model, based on the applied driving force and the possible frictional resistances that the membrane species encounter, to predict how the mobility under in-lipid-membrane forced convection is influenced by the sizes of the species' hydrophilic portion in the aqueous environment and the hydrophobic portion embedded in the membrane. In addition, we used a microfluidic device for controlling the flow to arrange the lipid membrane and the tested membrane species in the desirable locations in order to obtain a SLB platform which can provide clear mobility responses of the species without disturbance from the species dispersion effect. The model predictions were consistent with the experimental observations, with the sliding friction coefficient between the upper leaflet and the hydrophilic portion of the species as the only regressed parameter. The result suggests that not only the lateral drag frictions from the lipid layers but also the sliding frictions between the species and the lipid layer planes could significantly influence the species mobility. The consistency between the experimental results and the model predictions suggests that our model based on lateral drag and sliding frictions between the species and the lipid leaflets can be used to describe the mobility of half-transmembrane species. We also demonstrated the possibility of how the scope of this model can be broadened to describe the mobility of transmembrane proteins extending through both lipid leaflets.
Assuntos
Membrana Celular/química , Convecção , Bicamadas Lipídicas/química , Hidrodinâmica , Interações Hidrofóbicas e HidrofílicasRESUMO
Controlling flow patterns to align materials can have various applications in optics, electronics, and biosciences. In this study, we developed a natural-convection-based method to create desirable spatial flow patterns by controlling the locations of heat sources. Fluid motion in natural convection is induced by the spatial fluid density gradient that is caused by the established spatial temperature gradient. To analyze the patterning resolution capability of this method, we used a mathematical model combined with nondimensionalization to correlate the flow patterning resolution with experimental operating conditions. The nondimensionalized model suggests that the flow pattern and resolution is only influenced by two dimensionless parameters, and , where Gr is the Grashof number, representing the ratio of buoyancy to the viscous force acting on a fluid, and Pr is the Prandtl number, representing the ratio of momentum diffusivity to thermal diffusivity. We used the model to examine all of the flow behaviors in a wide range of the two dimensionless parameter group and proposed a flow pattern state diagram which suggests a suitable range of operating conditions for flow patterning. In addition, we developed a heating wire with an angular configuration, which enabled us to efficiently examine the pattern resolution capability numerically and experimentally. Consistent resolutions were obtained between the experimental results and model predictions, suggesting that the state diagram and the identified operating range can be used for further application.
RESUMO
Recombinant mucins are attractive polymeric building blocks for new biomaterials, biolubricants, and therapeutics. Advances in glycoengineered host cell systems now enable the recombinant production of mucins with tailored O-glycan side chains, offering new opportunities to tune the functionality of mucins and investigate the biology of specific O-glycan structures. Here, we provide a protocol for the scalable production of glycoengineered mucins and mucin-like glycoproteins in suspension-adapted HEK293-F cells. The protocol includes the preparation of engineered cell lines with homozygous knockout (KO) of glycosyltransferases using CRISPR/Cas9 and homology-directed repair (HDR) templates designed for efficient screening of clones. Strategies are provided for the stable introduction of mucin expression cassettes into the HEK293-F genome and the subsequent isolation of high-expressing cell populations. The high-titer production of recombinant mucins in conventional shaker flasks is described as an example production strategy using these cell lines.
Assuntos
Glicoproteínas , Mucinas , Humanos , Mucinas/metabolismo , Células HEK293 , Glicosiltransferases/metabolismo , Polissacarídeos/químicaRESUMO
The retention of calcium oxalate monohydrate (COM) crystals on cell membranes is pivotal in kidney stone formation. However, the mechanisms underlying COM attachment to neutral lipid membranes remain unclear. In this study, we demonstrate that COM exhibits size-selective adhesion to fluid lipid membranes composed of lipids with distinct sizes. Specifically, the (100) facet of COM induces the formation of new domains and establishes strong adhesion in the 18:1 (Δ9-Cis) PC (DOPC) membrane, while the (010) facet induces domains with strong adhesion in the 16:0-14:0 PC membrane. This selectivity is linked to the compatibility of the area per lipid in DOPC with the unit cell area of the (100) facet and the area per lipid in 16:0-14:0 PC with the (010) facet. Our Raman spectroscopic analyses reveal that the lipid acyl chains within these induced domains exhibit a higher degree of ordering compared to the typical fluid state of the membrane. This ordered structural alignment, combined with the lateral size-matching effect, suggests the potential formation of molecular arrays within the lipid bilayer that are in harmony with the lattice dimension of COM. To elucidate the strong adhesion between calcium oxalate and the phospholipid head group in the absence of a direct molecular structural correspondence, we propose that crystal water associated with COM can form hydrogen bonds with the phospholipid head group. Using structure visualization software, we demonstrate the feasibility of such hydrogen bonding networks. The formation of this network could serve to stabilize and enhance the attachment of COM to the lipid membrane. This mediation by water molecules offers a plausible explanation for the pronounced affinity at the interface.
Assuntos
Oxalato de Cálcio , Cálculos Renais , Humanos , Oxalato de Cálcio/química , Bicamadas Lipídicas , Fosfolipídeos , ÁguaRESUMO
Lubricin, a lubricating glycoprotein abundant in synovial fluid, forms a low-friction brush polymer interface in tissues exposed to sliding motion including joints, tendon sheaths, and the surface of the eye. Despite its therapeutic potential in diseases such as osteoarthritis and dry eye disease, there are few sources available. Through rational design, we developed a series of recombinant lubricin analogs that utilize the species-specific tissue-binding domains at the N- and C-termini to increase biocompatibility while replacing the central mucin domain with an engineered variant that retains the lubricating properties of native lubricin. In this study, we demonstrate the tissue binding capacity of our engineered lubricin product and its retention in the joint space of rats. Next, we present a new bioprocess chain that utilizes a human-derived cell line to produce O-glycosylation consistent with that of native lubricin and a purification strategy that capitalizes on the positively charged, hydrophobic N- and C-terminal domains. The bioprocess chain is demonstrated at 10 L scale in industry-standard equipment utilizing commonly available ion exchange, hydrophobic interaction and size exclusion chromatography resins. Finally, we confirmed the purity and lubricating properties of the recombinant biolubricant. The biomolecular engineering and bioprocessing strategies presented here are an effective means of lubricin production and could have broad applications to the study of mucins in general.
RESUMO
Metastasis is the leading cause of breast cancer-related deaths and is often driven by invasion and cancer-stem like cells (CSCs). Both the CSC phenotype and invasion are associated with increased hyaluronic acid (HA) production. How these independent observations are connected, and which role metabolism plays in this process, remains unclear due to the lack of convergent approaches integrating engineered model systems, computational tools, and cancer biology. Using microfluidic invasion models, metabolomics, computational flux balance analysis, and bioinformatic analysis of patient data, the functional links between the stem-like, invasive, and metabolic phenotype of breast cancer cells as a function of HA biosynthesis are investigated. These results suggest that CSCs are more invasive than non-CSCs and that broad metabolic changes caused by overproduction of HA play a role in this process. Accordingly, overexpression of hyaluronic acid synthases (HAS) 2 or 3 induces a metabolic phenotype that promotes cancer cell stemness and invasion in vitro and upregulates a transcriptomic signature predictive of increased invasion and worse patient survival. This study suggests that HA overproduction leads to metabolic adaptations to satisfy the energy demands for 3D invasion of breast CSCs highlighting the importance of engineered model systems and multidisciplinary approaches in cancer research.
Assuntos
Ácido Hialurônico , Neoplasias , Humanos , Ácido Hialurônico/farmacologia , Neoplasias/patologia , Linhagem Celular Tumoral , Células-Tronco Neoplásicas/metabolismoRESUMO
This work reports on the proof-of-concept of a photoelectrochemical (PEC) biosensor with a horseradish peroxidase-single stranded DNA-encoded magnetic bead (MB-ssDNA-HRP) signal probe cleaved by the catalytic hairpin assembly (CHA)-mediated clustered regularly interspaced short palindromic repeats (CRISPR)-Cas12a system for the quantification of microRNA (miR-21) by using yolk-in-shell Au@CdS as a photoactive material.
Assuntos
Técnicas Biossensoriais , MicroRNAs , Sistemas CRISPR-Cas , Catálise , DNA de Cadeia Simples , Técnicas Eletroquímicas , MicroRNAs/análiseRESUMO
Luminescent carbon nanostructures (CNSs) have attracted great interest from the scientific community due to their photoluminescent properties, structural features, low toxicity, and a great variety of possible applications. Unfortunately, a few problems hinder their further development. These include the difficulties of separating a mixture of nanostructures after synthesis and the dependence of their properties on the environment and the aggregate state. The application of a silica matrix to obtain luminescent composite particles minimizes these problems and improves optical properties, reduces photoluminescence quenching, and leads to wider applications. We describe two methods for the formation of silica composites containing CNSs: inclusion of CNSs into silica particles and their grafting onto the silica surface. Moreover, we present approaches to the synthesis of multifunctional particles. They combine the unique properties of silica and fluorescent CNSs, as well as magnetic, photosensitizing, and luminescent properties via the combination of functional nanoparticles such as iron oxide nanoparticles, titanium dioxide nanoparticles, quantum dots (QDs), and gold nanoclusters (AuNCs). Lastly, we discuss the advantages and challenges of these structures and their applications. The novelty of this review involves the detailed description of the approaches for the silica application as a matrix for the CNSs. This will support researchers in solving fundamental and applied problems of this type of carbon-based nanoobjects.