RESUMO
With the increasingly strict limitations on emission standards of vehicles, deep desulfurization in fuel is indispensable for social development worldwide. In this study, a series of hybrid materials based on SiO2-supported polyoxometalate ionic liquid were successfully prepared via a facile ball milling method and employed as catalysts in the aerobic oxidative desulfurization process. The composition and structure of prepared samples were studied by various techniques, including FT-IR, UV-vis DRS, wide-angle XRD, BET, XPS, and SEM images. The experimental results indicated that the synthesized polyoxometalate ionic liquids were successfully loaded on SiO2 with a highly uniform dispersion. The prepared catalyst (C16PMoV/10SiO2) exhibited good desulfurization activity on different sulfur compounds. Moreover, the oxidation product and active species in the ODS process were respectively investigated via GC-MS and ESR analysis, indicating that the catalyst can activate oxygen to superoxide radicals during the reaction to convert DBT to its corresponding sulfone in the fuel.
RESUMO
The ultrasensitive and quantitative detection of renal cancer protein biomarkers present at ultralow concentrations for early-stage cancer diagnosis requires a biosensing probe possessing ultrahigh detection sensitivity and remarkable biosensing selectivity. Here, we report an optical microfiber integrated with Ti3C2-supported gold nanorod hybrid nanointerfaces for implementation in ultrasensitive sensing of the carbonic anhydrase IX (CAIX) protein and renal cancer cells. Because the evanescent field of the fiber is strongly coupled with nanointerfaces in the near-infrared region, the proposed optical microfiber biosensor achieves ultrahigh-sensitivity detection of the CAIX protein biomarker with ultralow limits of detection (LODs) of 13.8 zM in pure buffer solution and 0.19 aM in 30% serum solution. In addition, the proposed sensor also successfully and specifically recognizes living renal cancer cells in cell culture media with a LOD of 180 cells/mL. This strategy may serves as a powerful biosensing platform that combines the quantification of protein biomarkers and cancer cells, resulting in a higher accuracy of early-stage renal cancer diagnosis and screenings.
Assuntos
Técnicas Biossensoriais , Neoplasias Renais , Nanotubos , Humanos , Ouro , Titânio , Técnicas Biossensoriais/métodos , Limite de Detecção , Antígeno Carcinoembrionário , Neoplasias Renais/diagnósticoRESUMO
The rendering of specular highlights is a critical aspect of 3D rendering on autostereoscopic displays. However, the conventional highlight rendering techniques on autostereoscopic displays result in depth conflicts between highlights and diffuse surfaces. To address this issue, we propose a viewpoint-dependent highlight depiction method with head tracking, which incorporates microdisparity of highlights in binocular parallax and preserves the motion parallax of highlights. Our method was found to outperform physical highlight depiction and highlight depiction with microdisparity in terms of depth perception and realism, as demonstrated by experimental results. The proposed approach offers a promising alternative to traditional physical highlights on autostereoscopic displays, particularly in applications that require accurate depth perception.
RESUMO
OBJECTIVE: To investigate the correlation between positional skull deformation (PD) and motor performance of infants under 4 months of age. METHODS: Infants aged under 4 months were enrolled in the children's healthcare and the premature infants follow-up Clinic of the Second Affiliated Hospital of Army Military Medical University. The cranial vault asymmetry (CVA) and cephalic index (CI) were calculated in all infants, and the infant motor performance test (TIMP) was used to evaluate the infant motor performance. The motor performances of infants with different types and degrees of PD were compared, so were the incidences of PD in infants with different motor performance levels. RESULTS: Overall, 2118 infants were recruited and divided according to the types of PD and TIMP scores. The comparison of TIMP scores within different types of PD at different months of age showed that, regardless of the types of PD, TIMP scores of infants with PD were lower than those of normal infants. In particular, the difference in TIMP scores was statistically significant (P < 0.05) in infants with dolichocephaly, plagiocephaly,dolicho-plagiocephaly and brachy-plagiocephy. In addition, the comparison of CVA values of infants with different TIMP score levels at different months of age showed that the CVA values of the extremely low-level group were significantly higher than those of the medium-level and high-level group, especially in the 3-month-old and 4-month-old groups, which showed significant statistical differences (P < 0.05). CONCLUSIONS: PD and motor performance of infants aged under 4 months seem to interact and influenc each other. The more serious the severity of PD were,the worse the motor performance of infants. Conversely, the incidence of PD increased in infants with poor motor performance.
Assuntos
Plagiocefalia , Crânio , Recém-Nascido , Criança , Lactente , Humanos , Crânio/diagnóstico por imagem , Cabeça , Recém-Nascido PrematuroRESUMO
Cadmium (Cd) is a toxic heavy metal pollutant and serves as an important environmental endocrine-disrupting chemical. Cd exposure is believed to can enhance the risks of age-related disorders including benign prostatic hyperplasia (BPH). This study was to investigate the harms of Cd exposure on mice prostate and human nonmalignant prostate epithelial RWPE-1 cells. Mice prostate fibrosis was evaluated by visualizing the prostatic collagen deposition via Masson and Sirius red staining, and detecting the content of hydroxyproline. Additionally, the epithelial-mesenchymal transition (EMT), primary ciliogenesis and SHH signaling pathways in both mice prostate and RWPE-1 cells were evaluated. It was found that Cd exposure stimulated prostatic collagen deposition, EMT and primary ciliogenesis, as well as enhanced the circ_0027470 level and reduced the miRNA-1236-3p level. Circ_0027470 functioned as a sponge of miRNA-1236-3p, which had the inhibiting target of SHH. The whole results showed that circ_0027470 promoted Cd exposure-induced prostatic fibrosis via sponging miRNA-1236-3p and subsequently stimulating SHH signaling pathway. This study shed a light on a novel molecular mechanism involved in circRNA for Cd exposure-induced prostate deficits.
Assuntos
MicroRNAs , Masculino , Camundongos , Animais , Humanos , MicroRNAs/genética , MicroRNAs/metabolismo , Próstata/metabolismo , Cádmio/toxicidade , Cádmio/metabolismo , Colágeno/metabolismo , Transdução de Sinais , Fibrose , Transição Epitelial-Mesenquimal , Proliferação de Células/genética , Proteínas Hedgehog/genética , Proteínas Hedgehog/metabolismoRESUMO
We present anl omnidirectional 3D autostereoscopic aerial display with continuous parallax. Integral photography (IP) combined with polyhedron-shaped aerial imaging plates (AIPs) is utilized to achieve an extended view angle of 3D aerial images. With optical theoretical analysis and an aerial in situ rotation design, a 3D aerial display with an enlarged viewing angle is realized. In particular, the proposed 3D aerial display can realize any assigned angle within 360 deg. We also optimize the aerial display with artifact image removal and floating image brightness analysis. Experiments are performed to prove the 3D aerial display with full-motion parallax, continuous viewpoints, and multiplayer interaction. The proposed system is an attractive prospect of non-contact interaction and multi-person collaboration.
RESUMO
BACKGROUND: Maize is frequently subjected to simultaneous water (drought or waterlogging) and heat (HS) stresses during grain formation in southern China. This work examined the effect of high temperature combined with drought (HD) or waterlogging (HW) during grain formation on the starch physicochemical properties of two waxy maize hybrids, namely Suyunnuo5 (SYN5) and Yunuo7 (YN7). RESULTS: Heat stress enlarged the starch granule size, and water stresses aggravated this effect. Heat stress reduced the ratio of small molecular weight fractions for both hybrids, and HD aggravated this reduction only in SYN5. Relative crystallinity in SYN5 was increased by stresses but in YN7 it was unaffected by HD, reduced by HS, and increased by HW. Fourier-transform infrared (FTIR) spectrometry results showed that the 1045/1022 cm-1 ratio in SYN5 was not influenced by HW but was increased by other stresses, and that in YN7 it was increased by all stresses, with the highest value induced by HW. Peak viscosity was decreased, whereas gelatinization temperatures and retrogradation percentage were increased by all of these stresses. These effects were exacerbated by combined heat and water stresses. The maximum decomposition rate was severely increased by HW. CONCLUSION: Drought or waterlogging at grain formation stage aggravated the detrimental effects of HS on the starch physicochemical properties of waxy maize. © 2020 Society of Chemical Industry.
Assuntos
Sementes/crescimento & desenvolvimento , Amido/química , Água/metabolismo , Zea mays/fisiologia , China , Resposta ao Choque Térmico , Temperatura Alta , Peso Molecular , Sementes/química , Sementes/metabolismo , Amido/metabolismo , Viscosidade , Zea mays/química , Zea mays/crescimento & desenvolvimentoRESUMO
We propose a novel full-parallax autostereoscopic display based on a lenticular tracking method to achieve separation between the viewing angle and image resolution and to improve these two parameters simultaneously. The proposed method enables the viewing angle to be independent of the image resolution and has the potential to solve the long-term trade-off problem in integral photography. By employing the lenticular lens array instead of the micro-lens array in integral photography with viewing tracking, the proposed method shows a high-image resolution and wide viewing angle 3D display with full parallax. A real-time tracking and rendering algorithm for the display method is also proposed in this study. The experimental results, compared with those of the conventional integral photography display and the tracking-based integral photography display, demonstrate the feasibility of this lenticular tracking display technology and its advantages in display resolution and viewing angle, suggesting its potential in practical three-dimensional applications.
RESUMO
To provide natural simulated objects and intuitive user interaction in medical education and training, we propose a naked eye 3D display and interaction system. The current 3D rendering algorithms for naked eye 3D displays are not suitable for medical use, due to the requirements of displaying and interacting with high quality medical images and simulating soft tissues. Because the traditional 3D rendering procedure and vertex indexing in collision detection require substantial computing power when using a naked eye 3D display, the current method cannot achieve fluent displays and interactions. Thus, we develop a novel octree-based 3D rendering and interaction algorithm for high quality medical models to improve the rendering rate and obtain smooth human machine interactions when using the naked eye 3D display device. We also valuate the soft-body phantom simulation of the naked eye 3D display device by combining the traditional 3D rendering algorithm with the elastic 3D simulation to simulate deformable tissues. We integrate an incremental interaction method and a Kalman filter-based hand tracking method to achieve a larger user interaction range and robust hand tracking. We used the proposed system to perform human-computer interactions with rigid phantoms and soft-body phantoms. The experimental results showed that the proposed rendering algorithm for rigid phantoms could achieve higher rendering performance (50 FPS) than the traditional rendering algorithm (9.8 FPS). The user experiments showed that the 3D simulation system equipped with the enhanced rendering algorithm could achieve fluent interactions when using the naked eye 3D display, thus promoting education experiences and reducing task completion times.
Assuntos
Educação Médica/organização & administração , Imageamento Tridimensional/métodos , Interface Usuário-Computador , Visão Ocular , Algoritmos , Simulação por Computador , Humanos , Sistemas Homem-MáquinaRESUMO
KEY MESSAGE: The first report of the cloning and characterization of the flowering time-regulating genes GI and CO homologs from loquat. Flowering time is critical for successful reproduction in plants. In fruit trees, it can also influence the fruit yield and quality. In the previous work, we cloned the important florigen one EdFT and two EdFDs from wild loquat (Eriobotrya deflexa Nakai forma koshunensis); however, the upstream transcription factors are still unknown. The photoperiod pathway genes GIGANTEA (GI) and CONSTANS (CO) have been reported to mainly regulate FT expression in model plants. In this work, we first cloned photoperiod pathway orthologs EdGI and EdCO from E. deflexa Nakai f. koshunensis. Phylogenetic analysis showed they are highly conserved to those from Arabidopsis. They are mainly expressed in the leaves. The EdGI and EdCO were localized in the nucleus. Their expression showed in photoperiodic regulation, while the EdCO transcripts reached the peak at different periods from that of CO in Arabidopsis. Moreover, EdCO significantly activated the EdFT promoter activity. In the transgenic Arabidopsis, downstream-flowering genes like FT and AP1 were obviously upregulated, and consequently resulted in early-flowering phenotype compared to the wild type. These data revealed that the EdGI and EdCO may play a similar role as GI and CO in Arabidopsis, and regulate flower initiation in loquat.
Assuntos
Eriobotrya/metabolismo , Arabidopsis/metabolismo , Proteínas de Arabidopsis/metabolismo , Eriobotrya/fisiologia , Flores/metabolismo , Flores/fisiologia , Regulação da Expressão Gênica de Plantas/genética , Regulação da Expressão Gênica de Plantas/fisiologia , Fotoperíodo , FilogeniaRESUMO
BACKGROUND: Waxy maize (Zea mays L. sinensis Kulesh) suffers short-term exposure to high temperature during grain filling in southern China. The effects of such exposure are poorly understood. RESULTS: Starch granule size was increased by 5 days' short-term heat stress (35.0 °C) and the increase was higher when the stress was introduced early. Heat stress increased the iodine binding capacity of starches and no difference was observed among the three stages. Starch relative crystallinity was increased and swelling power was decreased only when heat stress was introduced early. Heat stress also increased the pasting viscosity, and this effect became more pronounced with later applications of stress. Heat stress reduced starch gelatinization enthalpy, and the reduction gradually increased with later exposures. Heat stress increased the gelatinization temperature and retrogradation enthalpy and percentage of the samples, with the increases being largest with earlier introduction of high temperature. CONCLUSION: Heat stress increased the pasting viscosities and retrogradation percentage of starch by causing change in granule size, amylopectin chain length distribution and crystallinity, and the effects observed were more severe with earlier introduction of heat stress after pollination. © 2017 Society of Chemical Industry.
Assuntos
Extratos Vegetais/química , Amido/química , Zea mays/crescimento & desenvolvimento , Amilopectina/química , China , Temperatura Alta , Sementes/química , Sementes/crescimento & desenvolvimento , Sementes/metabolismo , Amido/metabolismo , Viscosidade , Zea mays/química , Zea mays/metabolismoRESUMO
Quality of three-dimensional (3D) autostereoscopic displays is mainly influenced by the mismatch between the optical apparatus setups and image generation algorithms. In this paper, we take the optical apparatus setups into consideration and present an accurate 3D autostereoscopic display method using optimized parameters through quantitative calibration. Rotational and translational alignments are operated quantitatively to rectify the optical apparatus. In addition, the main parameters in a 3D display are evaluated for accurate 3D image rendering. Using the proposed method, the 3D autostereoscopic display can be calibrated quantitatively and provide 3D images with accurate spatial information. Experiments verified the availability and feasibility of the proposed method.
RESUMO
During minimal invasive surgery (MIS), the laparoscope only provides a single viewpoint to the surgeon, leaving a lack of 3D perception. Many works have been proposed to obtain depth and 3D reconstruction by designing a new optical structure or by depending on the camera pose and image sequences. Most of these works modify the structure of the conventional laparoscopes and cannot provide 3D reconstruction of different magnification views. In this study, we propose a laparoscopic system based on double liquid lenses, which provide doctors with variable magnification rates, near observation, and real-time monocular 3D reconstruction. Our system composes of an optical structure that can obtain auto magnification change and autofocus without any physically moving element, and a deep learning network based on the Depth from Defocus (DFD) method, trained to suit inconsistent camera intrinsic situations and estimate depth from images of different focal lengths. The optical structure is portable and can be mounted on conventional laparoscopes. The depth estimation network estimates depth in real-time from monocular images of different focal lengths and magnification rates. Experiments show that our system provides a 0.68-1.44x zoom rate and can estimate depth from different magnification rates at 6fps. Monocular 3D reconstruction reaches at least 6mm accuracy. The system also provides a clear view even under 1mm close working distance. Ex-vivo experiments and implementation on clinical images prove that our system provides doctors with a magnified clear view of the lesion, as well as quick monocular depth perception during laparoscopy, which help surgeons get better detection and size diagnosis of the abdomen during laparoscope surgeries.
Assuntos
Laparoscopia , Cristalino , Lentes , Laparoscópios , Laparoscopia/métodos , AbdomeRESUMO
Euonymus hamiltonianus Wall. is considered a medicinal plant and is used to treat pain, cough, dysuria, and cancer, but a clear phytochemical investigation of its biological activities has yet to be performed. Investigation of chemical constituents of the leaves of Euonymus hamiltonianus Wall. led to the isolation of three new compounds by chromatography techniques, euonymusins A-C (1, 10, and 11), and the acquisition of new spectroscopic data for euonymusin D (2), along with the identification of ten known compounds. The chemical structures of the compounds were established using extensive spectroscopic techniques, including NMR, MS, and hydrolysis, and compared with the published data. These compounds were tested in vitro for their inhibitory effects on beta amyloid production (Aß42). Compounds 13 and 14 displayed weak inhibition, with IC50 values ranging from 53.15 to 65.43 µM. Moreover, these compounds were also assessed for their inhibitory effects on nitric oxide production. Of these compounds, 3, 4, and 14 displayed inhibitory effects on NO production, with IC50 values ranging from 14.38 to 17.44 µM. Compounds 3, 4, and 14 also suppressed LPS-induced expression of nitric oxide synthase (iNOS) and cyclooxygenase-2 (COX-2) protein.
RESUMO
Seven unknown compounds 1-7, including four sesquiterpenoids, one azulene-type, one indene-type, and one rare hexanorcucurbitacin, together with eleven knowns ones (8-16), were isolated from the agarwood chips of Aquilaria malaccensis. The structures of the isolated compounds were elucidated by extensive spectroscopic methods such as mass spectrometry, UV, IR, NMR spectroscopy. The precise stereo-chemical configurations of new compounds were determined by calculated ECD spectra data, as well as a single-crystal X-ray diffraction analysis. The isolated compounds 1-7 were evaluated by estimating the levels of nitric oxide (NO), TNF-α, and the expression of enzyme iNOS, and COX-2. Among them, a rare hexanortriterpenoid (7) derived from a cucurbitane-type triterpenoid showed the significantly attenuated neuro-inflammatory effects via the STAT1/AKT/MAPK/NLRP3 signaling pathway on the mechanistic studies.
RESUMO
Dementia is a syndrome exhibiting progressive impairments on cognition and behavior beyond the normal course of aging, and Alzheimer's disease (AD) is one of the neurodegenerative diseases known to cause dementia. We investigated the effect of KGC07EH, the 30% ethanol extract of Euonymus hamiltonianus, against amyloid-ß (Aß) production and cognitive dysfunction in dementia models. KGC07EH was treated on Hela cells expressing the Swedish mutant form of amyloid precursor protein (APP), and the AD triple transgenic (3× TG) mice were given KGC07EH orally during 11-14 months of age (100 and 300 mg/kg/day). SH-SY5Y cell line was used to test KGC07EH on scopolamine-induced elevation of acetylcholinesterase (AChE) activity. ICR mice were intraperitoneally injected with scopolamine, and KGC07EH was administered orally (50, 100, and 200 mg/kg/day) for 4 weeks. KGC07EH treatment decreased Aß, sAPPß-sw, and sAPPß-wt levels and APP protein expressions while sAPPα was increased in Swedish mutant-transfected HeLa cells. KGC07EH treatment also significantly reduced the accumulation of Aß plaques and tau tangles in the brain of 3× TG mice as well as improving the cognitive function. In SH-SY5Y cells cultured with scopolamine, KGC07EH dose-dependently attenuated the increase of AChE activity. KGC07EH also improved scopolamine-induced learning and memory impairment in scopolamine-injected mice, and in their cerebral cortex and hippocampus, the expression levels of p-ERK, p-CREB, p-Akt, and BDNF were attenuated. KGC07EH inhibits APP processing and Aß production both in vitro and in vivo, while enhancing acetylcholine signaling and cognitive dysfunction which are the major symptoms of dementia.
RESUMO
Augmented reality (AR) surgical navigation has developed rapidly in recent years. This paper reviews and analyzes the visualization, registration, and tracking techniques used in AR surgical navigation systems, as well as the application of these AR systems in different surgical fields. The types of AR visualization are divided into two categories ofin situvisualization and nonin situvisualization. The rendering contents of AR visualization are various. The registration methods include manual registration, point-based registration, surface registration, marker-based registration, and calibration-based registration. The tracking methods consist of self-localization, tracking with integrated cameras, external tracking, and hybrid tracking. Moreover, we describe the applications of AR in surgical fields. However, most AR applications were evaluated through model experiments and animal experiments, and there are relatively few clinical experiments, indicating that the current AR navigation methods are still in the early stage of development. Finally, we summarize the contributions and challenges of AR in the surgical fields, as well as the future development trend. Despite the fact that AR-guided surgery has not yet reached clinical maturity, we believe that if the current development trend continues, it will soon reveal its clinical utility.
Assuntos
Realidade Aumentada , Cirurgia Assistida por Computador , Imageamento Tridimensional , Cirurgia Assistida por Computador/métodos , CalibragemRESUMO
Deep learning has brought about a revolution in the field of medical diagnosis and treatment. The use of deep learning in healthcare has grown exponentially in recent years, achieving physician-level accuracy in various diagnostic tasks and supporting applications such as electronic health records and clinical voice assistants. The emergence of medical foundation models, as a new approach to deep learning, has greatly improved the reasoning ability of machines. Characterized by large training datasets, context awareness, and multi-domain applications, medical foundation models can integrate various forms of medical data to provide user-friendly outputs based on a patien's information. Medical foundation models have the potential to integrate current diagnostic and treatment systems, providing the ability to understand multi-modal diagnostic information and real-time reasoning ability in complex surgical scenarios. Future research on foundation model-based deep learning methods will focus more on the collaboration between physicians and machines. On the one hand, developing new deep learning methods will reduce the repetitive labor of physicians and compensate for shortcomings in their diagnostic and treatment capabilities. On the other hand, physicians need to embrace new deep learning technologies, comprehend the principles and technical risks of deep learning methods, and master the procedures for integrating them into clinical practice. Ultimately, the integration of artificial intelligence analysis with human decision-making will facilitate accurate personalized medical care and enhance the efficiency of physicians.
Assuntos
Aprendizado Profundo , Médicos , Humanos , Inteligência Artificial , Atenção à SaúdeRESUMO
Sinapic acid (SA) is a phenolic acid that is widely distributed in fruits and vegetables, which has various bioactivities, such as antidiabetic, anticancer and anti-inflammatory functions. Over-activated microglial is involved in the development progress of neurodegenerative diseases, such as Parkinson's disease and Alzheimer's disease. The objective of this study was to investigate the effect of SA in microglia neuroinflammation models. Our results demonstrated that SA inhibited secretion of the nitric oxide (NO) and interleukin (IL)-6, reduced the expression of inducible nitric oxide synthase (iNOS) and enhanced the release of IL-10 in a dose-dependent manner. Besides, our further investigation revealed that SA attenuated the phosphorylation of AKT and MAPK cascades in LPS-induced microglia. Consistently, oral administration of SA in mouse regulated the production of inflammation-related cytokines and also suppressed the phosphorylation of MAPK cascades and AKT in the mouse cerebral cortex. These results suggested that SA may be a possible therapy candidate for anti-inflammatory activity by targeting the AKT/MAPK signaling pathway.
RESUMO
Korean ginseng (Panax ginseng) is a traditional herbal supplement known to have a variety of pharmacological activities. A smart farm system could provide potential standardization of ginseng seedlings after investigating plant metabolic responses to various parameters in order to design optimal conditions. This research was performed to investigate the effect of smart-farmed ginseng on memory improvement in a scopolamine-induced memory deficit mouse model and an LPS-induced microglial cell model. A smart farming system was applied to culture ginseng. The administration of its extract (S2 extract) under specific culture conditions significantly attenuated cognitive and spatial memory deficits by regulating AKT/ERK/CREB signaling, as well as the cortical inflammation associated with suppression of COX-2 and NLRP3 induced by scopolamine. In addition, S2 extract improved the activation of iNOS and COX-2, and the secretion of NO in LPS-induced BV-2 microglia. Based on the HPLC fingerprint and in vitro data, ginsenosides Rb2 and Rd were found to be the main contributors to the anti-inflammatory effects of the S2 extract. Our findings suggest that integrating a smart farm system may enhance the metabolic productivity of ginseng and provides evidence of its potential impact on natural bioactive compounds of medicinal plants with beneficial qualities, such as ginsenosides Rb2 and Rd.