Surface Functionalization of Enzyme-Coronated Gold Nanoparticles with an Erythrocyte Membrane for Highly Selective Glucose Assays.

Colorimetric glucose sensors using enzyme-coronated gold nanoparticles have been developed for high-throughput assays to monitor the blood glucose levels of diabetic patients. Although those sensors have shown sensitivity and wide linear detection ranges, they suffer from poor selectivity and stability in detecting blood glucose, which has limited their practical use. To address this limitation, herein, we functionalized glucose-oxidase-coronated gold nanoparticles with an erythrocyte membrane (EM-GOx-GNPs). Because the erythrocyte membrane (EM) selectively facilitates the permeation of glucose via glucose transporter-1 (GLUT1), the functionalization of GOx-GNPs with EM improved the stability, selectivity (3.3- to 15.8-fold higher), and limit of detection (LOD). Both membrane proteins, GLUT1 and aquaporin-1 (AQP1), on EM were shown to be key components for selective glucose detection by treatment with their inhibitors. Moreover, we demonstrated the stability of EM-GOx-GNPs in high-antioxidant-concentration conditions, under long-term storage (∼4 weeks) and a freeze-thaw cycle. Selectivity of the EM-GOx-GNPs against other saccharides was increased, which improved the LOD in phosphate-buffered saline and human serum. Our results indicated that the functionalization of colorimetric glucose sensors with EM is beneficial for improving selectivity and stability, which may make them candidates for use in a practical glucose sensor.

Multiplex SNP Genotyping Using SWITCH: Sequence-Specific Nanoparticle with Interpretative Toehold-Mediated Sequence Decoding in Hydrogel.

Single nucleotide polymorphisms (SNPs) that can alter phenotypes of individuals play a pivotal role in disease development and, more importantly, responses to therapy. However, SNP genotyping has been challenging due to the similarity of SNP alleles and their low concentration in biological samples. Sequence-specific nanoparticle with interpretative toehold-mediated sequence decoding in hydrogel (SWITCH) for multiplex SNP genotyping is presented. The encoding with gold nanoparticle probes transduces each SNP target to ≈1000 invaders with prominently different sequences between wild and mutant types, featuring polymerase chain reaction (PCR)-free amplification. Subsequently, the toehold-mediated DNA replacement in hydrogel microparticles decodes the invaders via SNP-specific fluorescence signals. The 4-plex detection of the warfarin-associated SNP targets spiked in commercially validated human serum (S1-100ML, Merck) is successfully demonstrated with excellent specificity. This work is the first technology development presenting PCR-free, multiplex SNP genotyping with a single reporting fluorophore, to the best of knowledge.

Electrokinetic Size-Based Spatial Separation of Micro/Nanospheres Using Paper-Based 3D Origami Preconcentrator.

Sample preparation steps (e.g., preconcentration and separation) are key to enhancing sensitivity and reliability in biomedical and analytical chemistry. However, conventional methods (e.g., ultracentrifugation) cause significant loss of sample as well as their contamination. In this study, we developed a paper-based three-dimensional (3D) origami ion concentration polarization preconcentrator (POP) for highly efficient and facile sample preparation. The unique design of POP enables simultaneous preconcentration and spatial separation of target analytes rapidly and economically. The POP comprises accordion-like multifolded layers with convergent wicking areas that can separate analytes based on their sizes in different layers, which can then be easily isolated by unfolding the POP. We first demonstrated 100-fold preconcentration of albumin and its isolation on the specific layers. Then, we demonstrated the simultaneous preconcentration and spatial separation of microspheres of three different sizes (with diameters of 0.02, 0.2, and 2 µm) on the different layers.

Highly Sensitive Micropatterned Interdigitated Electrodes for Enhancing the Concentration Effect Based on Dielectrophoresis.

The concentration effect of dielectrophoresis (DEP) enables detection of biomolecules with high sensitivity. In this study, microstructures were patterned between the interdigitated microelectrodes (IMEs) to increase the concentration effect of DEP. The microstructures increased the electric field gradient ( ∇ | E 2 | ) between the IMEs to approximately 6.61-fold higher than in the bare IMEs with a gap of 10 µm, resulting in a decreased optimal voltage to concentrate amyloid beta 42 (Aß42, from 0.8 Vpp to 0.5 Vpp) and tau-441 (from 0.9 Vpp to 0.6 Vpp) between the IMEs. Due to the concentration effect of DEP, the impedance change in the optimal condition was higher than the values in the reference condition at 2.64-fold in Aß42 detection and at 1.59-fold in tau-441 detection. This concentration effect of DEP was also verified by counting the number of gold (Au) particles which conjugated with the secondary antibody. Finally, an enhanced concentration effect in the patterned IMEs was verified by measuring the impedance change depending on the concentration of Aß42 and tau-441. Our results suggest that microstructures increase the concentration effect of DEP, leading to enhanced sensitivity of the IMEs.

Amyloid Beta Detection by Faradaic Electrochemical Impedance Spectroscopy Using Interdigitated Microelectrodes.

Faradaic electrochemical impedance spectroscopy (f-EIS) in the presence of redox reagent, e.g., [Fe(CN)6]3-/4-, is widely used in biosensors owing to its high sensitivity. However, in sensors detecting amyloid beta (Aß), the redox reagent can cause the aggregation of Aß, which is a disturbance factor in accurate detection. Here, we propose an interdigitated microelectrode (IME) based f-EIS technique that can alleviate the aggregation of Aß and achieve high sensitivity by buffer control. The proposed method was verified by analyzing three different EIS-based sensors: non-faradaic EIS (nf-EIS), f-EIS, and the proposed f-EIS with buffer control. We analyzed the equivalent circuits of nf-EIS and f-EIS sensors. The dominant factors of sensitivity were analyzed, and the impedance change rates via Aß reaction was compared. We measured the sensitivity of the IME sensors based on nf-EIS, f-EIS, and the proposed f-EIS. The results demonstrate that the proposed EIS-based IME sensor can detect Aß with a sensitivity of 7.40-fold and 10.93-fold higher than the nf-EIS and the f-EIS sensors, respectively.

Multifunctionalized Reduced Graphene Oxide Biosensors for Simultaneous Monitoring of Structural Changes in Amyloid-ß 40.

Determination of the conformation (monomer, oligomer, or fibril) of amyloid peptide aggregates in the human brain is essential for the diagnosis and treatment of Alzheimer's disease (AD). Accordingly, systematic investigation of amyloid conformation using analytical tools is essential for precisely quantifying the relative amounts of the three conformations of amyloid peptide. Here, we developed a reduced graphene oxide (rGO) based multiplexing biosensor that could be used to monitor the relative amounts of the three conformations of various amyloid-ß 40 (Aß40) fluids. The electrical rGO biosensor was composed of a multichannel sensor array capable of individual detection of monomers, oligomers, and fibrils in a single amyloid fluid sample. From the performance test of each sensor, we showed that this method had good analytical sensitivity (1 pg/mL) and a fairly wide dynamic range (1 pg/mL to 10 ng/mL) for each conformation of Aß40. To verify whether the rGO biosensor could be used to evaluate the relative amounts of the three conformations, various amyloid solutions (monomeric Aß40, aggregated Aß40, and disaggregated Aß40 solutions) were employed. Notably, different trends in the relative amounts of the three conformations were observed in each amyloid solution, indicating that this information could serve as an important parameter in the clinical setting. Accordingly, our analytical tool could precisely detect the relative amounts of the three conformations of Aß40 and may have potential applications as a diagnostic system for AD.

Enhancing the Responsivity of Uncooled Infrared Detectors Using Plasmonics for High-Performance Infrared Spectroscopy.

A lead zirconate titanate (PZT;Pb(Zr0.52Ti0.48)O3) layer embedded infrared (IR) detector decorated with wavelength-selective plasmonic crystals has been investigated for high-performance non-dispersive infrared (NDIR) spectroscopy. A plasmonic IR detector with an enhanced IR absorption band has been designed based on numerical simulations, fabricated by conventional microfabrication techniques, and characterized with a broadly tunable quantum cascade laser. The enhanced responsivity of the plasmonic IR detector at specific wavelength band has improved the performance of NDIR spectroscopy and pushed the limit of detection (LOD) by an order of magnitude. In this paper, a 13-fold enhancement in the LOD of a methane gas sensing using NDIR spectroscopy is demonstrated with the plasmonic IR detector.

Study of Alzheimer's Disease-Related Biophysical Kinetics with a Microslit-Embedded Cantilever Sensor in a Liquid Environment.

A microsized slit-embedded cantilever sensor (slit cantilever) was fabricated and evaluated as a biosensing platform in a liquid environment. In order to minimize the degradation caused by viscous damping, a 300 × 100 µm² (length × width) sized cantilever was released by a 5 µm gap-surrounding and vibrated by an internal piezoelectric-driven self-actuator. Owing to the structure, when the single side of the slit cantilever was exposed to liquid a significant quality factor (Q = 35) could be achieved. To assess the sensing performance, the slit cantilever was exploited to study the biophysical kinetics related to Aß peptide. First, the quantification of Aß peptide with a concentration of 10 pg/mL to 1 µg/mL was performed. The resonant responses exhibited a dynamic range from 100 pg/mL to 100 ng/mL (-56.5 to -774 ΔHz) and a dissociation constant (KD) of binding affinity was calculated as 1.75 nM. Finally, the Aß self-aggregation associated with AD pathogenesis was monitored by adding monomeric Aß peptides. As the concentration of added analyte increased from 100 ng/mL to 10 µg/mL, both the frequency shift values (-813 to -1804 ΔHz) and associate time constant increased. These results showed the excellent sensing performance of the slit cantilever overcoming a major drawback in liquid environments to become a promising diagnostic tool candidate.

Simple and Highly Sensitive Molecular Diagnosis of Zika Virus by Lateral Flow Assays.

We have developed a simple, user-friendly, and highly sensitive Zika virus (ZIKV) detection method by incorporating optimized reverse transcription loop-mediated isothermal amplification (RT-LAMP) and a lateral flow assay (LFA). The optimized RT-LAMP reaction was carried out using Bst 3.0 polymerase, which has robust and fast isothermal amplification performance even in the presence of high concentrations of inhibitors; this permitted the amplification of ZIKV RNA in pure water and human whole blood. In addition, the strong reverse transcription activity of Bst 3.0 polymerase enabled specific ZIKV RNA amplification without extra addition of reverse transcriptase. The RT-LAMP condition was optimized by adjusting the Mg2+ and dNTP mix concentration to extirpate nontarget amplification, which is caused by nonspecific primer dimers amplification. After 30 min of RT-LAMP reaction, the resultant amplicons were simply and rapidly analyzed by the LFA test in less than 5 min. The optimized RT-LAMP combined with the LFA allowed specific ZIKV RNA detection down to the single copy level within 35 min.

Dependence of Impedance Measurement Sensitivity of Cell Growth on Sensing Area of Circular Interdigitated Electrode.

A circular interdigitated electrode (IDE) array for label-free and real-time impedance monitoring of cell growth was fabricated and evaluated. Both the width and spacing of fingers were 50 µm, and the exposed sensing area of the circular IDE was 1.3~3.4 mm. The electrical characteristics of the fabricated circular IDE were modeled as an equivalent circuit, and the values of the circuit parameters extrapolated from the fitting to the measured spectra in different concentrations of NaCl or sensing areas of the circular IDE were analyzed. During cell growth, the resistance of cells extrapolated from the fitting was increased and the maximum rate of change in the real part of the impedance was observed at frequencies of 10 to 22 kHz. The normalized real part of the impedance measured at 10 kHz during cell growth was increased more with decreasing the electrode sensing area, albeit the number of cells to be investigated showed a corresponding increase.

A Micro-Preconcentrator Combined Olfactory Sensing System with a Micromechanical Cantilever Sensor for Detecting 2,4-Dinitrotoluene Gas Vapor.

Preventing unexpected explosive attacks and tracing explosion-related molecules require the development of highly sensitive gas-vapor detection systems. For that purpose, a micromechanical cantilever-based olfactory sensing system including a sample preconcentrator was developed to detect 2,4-dinitrotoluene (2,4-DNT), which is a well-known by-product of the explosive molecule trinitrotoluene (TNT) and exists in concentrations on the order of parts per billion in the atmosphere at room temperature. A peptide receptor (His-Pro-Asn-Phe-Ser-Lys-Tyr-Ile-Leu-His-Gln-Arg) that has high binding affinity for 2,4-DNT was immobilized on the surface of the cantilever sensors to detect 2,4-DNT vapor for highly selective detection. A micro-preconcentrator (µPC) was developed using Tenax-TA adsorbent to produce higher concentrations of 2,4-DNT molecules. The preconcentration was achieved via adsorption and thermal desorption phenomena occurring between target molecules and the adsorbent. The µPC directly integrated with a cantilever sensor and enhanced the sensitivity of the cantilever sensor as a pretreatment tool for the target vapor. The response was rapidly saturated within 5 min and sustained for more than 10 min when the concentrated vapor was introduced. By calculating preconcentration factor values, we verified that the cantilever sensor provides up to an eightfold improvement in sensing performance.

A micro-fabricated force sensor using an all thin film piezoelectric active sensor.

The ability to measure pressure and force is essential in biomedical applications such as minimally invasive surgery (MIS) and palpation for detecting cancer cysts. Here, we report a force sensor for measuring a shear and normal force by combining an arrayed piezoelectric sensors layer with a precut glass top plate connected by four stress concentrating legs. We designed and fabricated a thin film piezoelectric force sensor and proposed an enhanced sensing tool to be used for analyzing gentle touches without the external voltage source used in FET sensors. Both the linear sensor response from 3 kPa to 30 kPa and the exact signal responses from the moving direction illustrate the strong feasibility of the described thin film miniaturized piezoelectric force sensor.

Bioengineered amyloid peptide for rapid screening of inhibitors against main protease of SARS-CoV-2.

The coronavirus disease 2019 (COVID-19) caused by severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) has evoked a worldwide pandemic. As the emergence of variants has hampered the neutralization capacity of currently available vaccines, developing effective antiviral therapeutics against SARS-CoV-2 and its variants becomes a significant challenge. The main protease (Mpro) of SARS-CoV-2 has received increased attention as an attractive pharmaceutical target because of its pivotal role in viral replication and proliferation. Here, we generated a de novo Mpro-inhibitor screening platform to evaluate the efficacies of Mpro inhibitors based on Mpro cleavage site-embedded amyloid peptide (MCAP)-coated gold nanoparticles (MCAP-AuNPs). We fabricated MCAPs comprising an amyloid-forming sequence and Mpro-cleavage sequence, mimicking in vivo viral replication process mediated by Mpro. By measuring the proteolytic activity of Mpro and the inhibitory efficacies of various drugs, we confirmed that the MCAP-AuNP-based platform was suitable for rapid screening potential of Mpro inhibitors. These results demonstrated that our MCAP-AuNP-based platform has great potential for discovering Mpro inhibitors and may accelerate the development of therapeutics against COVID-19.

Plasma-based diagnostic and screening platform using a combination of biosensing signals in Alzheimer's disease.

Using biosensor to screen for Alzheimer's disease (AD) facilitates early detection of AD with high sensitivity and accuracy. This approach overcomes the limitations of conventional AD diagnostic methods, such as neuropsychological assessment and neuroimaging analysis. Here, we propose a simultaneous analysis of signal combinations generated by four crucial AD biomarkers (Amyloid beta 1-40 (Aß40), Aß42, total tau 441 (tTau441), and phosphorylated tau 181 (pTau181)) by inducing a dielectrophoretic (DEP) force on fabricated interdigitated microelectrode (IME) sensor. By applying an optimal DEP force, our biosensor selectively concentrates and filters the plasma-based AD biomarkers, exhibiting high sensitivity (limit of detection <100 fM) and selectivity in the plasma-based AD biomarkers detection (p < 0.0001). Consequently, it is demonstrated that a complex combined signal comprising four AD-specific biomarker signals (Aß40- Aß42+ tTau441- pTau181) can differentiate between patients with AD and healthy subjects with high accuracy (78.85%) and precision (80.95%) (p < 0.0001).

Caco-2 cell-derived biomimetic electrochemical biosensor for cholera toxin detection.

Cholera is a highly contagious and lethal waterborne disease induced by an infection with Vibrio cholerae (V. cholerae) secreting cholera toxin (CTx). Cholera toxin subunit B (CTxB) from the CTx specifically binds with monosialo-tetra-hexosyl-ganglioside (GM1) found on the exterior cell membrane of an enterocyte. Bioinspired by the pathological process of CTx, we developed an electrochemical biosensor with GM1-expressing Caco-2 cell membrane (CCM) on the electrode surface. Briefly, the electrode surface was functionalized with CCM using the vesicle fusion method. We determined the CTxB detection performances of Caco-2 cell membrane-coated biosensor (CCB) using electrochemical impedance spectroscopy (EIS). the CCB had an excellent limit of detection of ∼11.46 nM and a detection range spanning 100 ng/mL - 1 mg/mL. In addition, the CCB showed high selectivity against various interfering molecules, including abundant constituents of intestinal fluid and various bacterial toxins. The long-term stability of the CCBs was also verified for 3 weeks using EIS. Overall, the CCB has excellent potential for practical use such as point-of-care and cost-effective testing for CTxB detection in developing countries.

Biomimetically Engineered Amyloid-Shelled Gold Nanocomplexes for Discovering α-Synuclein Oligomer-Degrading Drugs.

The assembly of α-synuclein (αS) oligomers is recognized as the main pathological driver of synucleinopathies. While the elimination of toxic αS oligomers shows promise for the treatment of Parkinson's disease (PD), the discovery of αS oligomer degradation drugs has been hindered by the lack of proper drug screening tools. Here, we report a drug screening platform for monitoring the efficacy of αS-oligomer-degrading drugs using amyloid-shelled gold nanocomplexes (ASGNs). We fabricate ASGNs in the presence of dopamine, mimicking the in vivo generation process of pathological αS oligomers. To test our platform, the first of its kind for PD drugs, we use αS-degrading proteases and various small molecular substances that have shown efficacy in PD treatment. We demonstrate that the ASGN-based in vitro platform has strong potential to discover effective αS-oligomer-targeting drugs, and thus it may reduce the attrition problem in drug discovery for PD treatment.

Multifunctionalized cantilever systems for electronic nose applications.

Multiple target detection using a cantilever is essential for biosensor, chemical sensor, and electronic nose systems. We report a novel microcantilever array chip that includes four microreaction chambers in a chip, which consequently contains four different functionalized surfaces for multitarget detection. For model tests, we designed microcantilever chips and demonstrated the ability of binding of 2,4-dinitrotoluene (DNT) targets onto four different surfaces. We used peptide receptors that are known to have highly selective binding. By simply using four microreaction chambers, we immobilized DNT specific peptide (HPNFSKYILHQRC; SP), DNT nonspecific peptide (TSMLLMSPKHQAC; NSP), and self-assembled monolayer (SAM) as well as a bare cantilever. After flowing DNT gases through the cantilever chip, we could monitor the four different binding signals simultaneously. The shifts in NSP provided information as a negative control because it contained information of temperature fluctuations and mechanical vibration from gas flow. By utilizing the differential signal of the SP and NSP, we acquired 7.5 Hz in resonant responses that corresponds with 160 part per billion (ppb) DNT concentration, showing the exact binding response by eliminating the inevitable thermal noise, vibration noise, as well as humidity effects on the peptide surface.

Scalable Functionalization of Polyaniline-Grafted rGO Field-Effect Transistors for a Highly Sensitive Enzymatic Acetylcholine Biosensor.

For decades, acetylcholine (Ach) has been considered a critical biomarker for several degenerative brain diseases, including Alzheimer's, Parkinson's disease, Huntington's disease, and schizophrenia. Here, we propose a wafer-scale fabrication of polyaniline (PAni)-grafted graphene-based field-effect transistors (PGFET) and their biosensing applications for highly sensitive and reliable real-time monitoring of Ach in flow configuration. The grafted PAni provides suitable electrostatic binding sites for enzyme immobilization and enhances the pH sensitivity (2.68%/pH), compared to that of bare graphene-FET (1.81%/pH) for a pH range of 3-9 without any pH-hysteresis. We further evaluated the PGFET's sensing performance for Ach detection with a limit of detection at the nanomolar level and significantly improved sensitivity (~103%) in the concentration range of 108 nM to 2 mM. Moreover, the PGFET exhibits excellent selectivity against various interferences, including glucose, ascorbic acid, and neurotransmitters dopamine and serotonin. Finally, we investigated the effects of an inhibitor (rivastigmine) on the AchE activity of the PGFET. From the results, we demonstrated that the PGFET has great potential as a real-time drug-screening platform by monitoring the inhibitory effects on enzymatic activity.

Clinical application of serological Alzheimer's disease diagnosis using a highly sensitive biosensor with hydrogel-enhanced dielectrophoretic force.

Analysis of a ratio between amyloid beta 1-40 and 1-42 (Aß1-40 and Aß1-42) presented in plasm enables a highly accurate diagnosis of Alzheimer's disease (AD). However, the analysis of plasma Aßs is not routinely conducted because of the lack of Aß detection techniques sensitive enough to specifically detect Aß from thousands of biomaterials present in the plasma. We developed a hydrogel-patterned spiral microelectrode sensor combined with a hopping dielectrophoretic (DEP) force, combining the negative DEP and positive DEP forces, for Aß detection. The hydrogel effectively increased the number of immobilized fragmented antibodies in the reaction region of the sensor and enabled size-exclusive passive filtration of non-specific plasma proteins from that region. The hopping DEP force further concentrated the Aßs and removed the non-specific plasma proteins. Consequently, our sensor achieved a limit of detection (LOD) of approximately âˆ¼ 0.15 pg/mL for both Aß1-40 and Aß1-42 in the standard plasma. Finally, comparing the ratio between Aß1-40 and Aß1-42 signals, we distinguished AD patients from cognitively normal subjects with 95.83% accuracy and 92.31% precision (n = 24, p < 0.0001, One-way ANOVA).

A Hybrid Zeolite Membrane-Based Breakthrough for Simultaneous CO2 Capture and CH4 Upgrading from Biogas.

Biogas is an environmentally friendly and sustainable energy resource that can substitute or complement conventional fossil fuels. For practical uses, biogas upgrading, mainly through the effective separation of CO2 (0.33 nm) and CH4 (0.38 nm), is required to meet the approximately 90-95% purity of CH4, while CO2 should be concomitantly purified. In this study, a high CO2 perm-selective zeolite membrane was synthesized by heteroepitaxially growing a chabazite (CHA) zeolite seed layer with a synthetic precursor that allowed the formation of all-silica deca-dodecasil 3 rhombohedral (DDR) zeolite (with a pore size of 0.36 × 0.44 nm2). The resulting hydrophobic DDR@CHA hybrid membrane on an asymmetric α-Al2O3 tube was thin (ca. 2 µm) and continuous, thus providing both high flux and permselectivity for CO2 irrespective of the presence or absence of water vapor (the third largest component in the biogas streams). To the best of our knowledge, the CO2 permeance of (2.9 ± 0.3) × 10-7 mol m-2 s-1 Pa-1 and CO2/CH4 separation factor of ca. 274 ± 73 at a saturated water vapor partial pressure of ca. 12 kPa at 50 °C have the highest CO2/CH4 separation performance yet achieved. Furthermore, we explored the membrane module properties of the hybrid membrane in terms of the recovery and purity of both CO2 and CH4 under dry and wet conditions. Despite the high intrinsic membrane properties of the current hybrid membrane, reflected by the high permeance and SF, the corresponding module properties indicated that high-performance separation of CO2 and CH4 for the desired biogas upgrading was achieved at a limited processing capacity. This supports the importance of understanding the correlation between the membrane and module properties, as this will provide guidance for the optimal operating conditions.